1. Introduction
The CHAUVET DJ COREpar 80 USB is a high-performance LED wash light effect designed for various lighting applications. It features Chip-on-Board (COB) technology for superior color mixing and a magnetic lens system that allows for quick changes between ultra-wide and narrow beam angles. This fixture also offers D-Fi USB compatibility for wireless control, along with DMX, master/slave, and sound-activated modes.
This manual provides essential information for the safe and efficient operation of your COREpar 80 USB. Please read it thoroughly before installation or use.
2. Safety Information
Always follow these basic safety precautions to reduce the risk of fire, electric shock, and personal injury:
- Connect the fixture to a grounded circuit only.
- Do not operate the fixture if the power cord is damaged.
- Ensure proper ventilation around the unit to prevent overheating.
- Avoid direct eye exposure to the light source.
- Disconnect from power before cleaning or servicing.
- This fixture is for indoor use only.
3. Package Contents
Verify that your package contains the following items:
- CHAUVET DJ COREpar 80 USB Fixture
- Power Cord
- Magnetic Fresnel Lens
- Quick Reference Guide
4. Setup
4.1 Mounting
The COREpar 80 USB can be mounted in various orientations using its integrated yoke. It can also sit flat on the floor, with power and DMX connections conveniently located on the side of the unit.
Figure 1: Angled view of the COREpar 80 USB, highlighting its robust housing and yoke.
4.2 Power Connection
Connect the provided power cord to the power input on the side of the fixture and then to a suitable power outlet. Ensure the voltage matches the fixture's requirements.
4.3 DMX Connection (Optional)
For DMX control, connect a DMX cable from your DMX controller to the DMX input of the COREpar 80 USB. For multiple units, daisy-chain them by connecting the DMX output of one fixture to the DMX input of the next.
4.4 USB D-Fi Connection (Optional)
The COREpar 80 USB is compatible with CHAUVET DJ D-Fi USB transceivers (sold separately) for wireless DMX or master/slave control. Insert the D-Fi USB transceiver into the USB port on the fixture.
4.5 Magnetic Lens Installation
The included magnetic Fresnel lens can be easily attached or removed from the front of the fixture to change the beam angle. Simply align the lens with the front of the light and allow the magnets to secure it in place.
5. Operation
5.1 Control Panel
The rear panel of the COREpar 80 USB features a digital display and control buttons for navigating menus and setting parameters.
Figure 2: Rear control panel for menu navigation and settings.
5.2 Operating Modes
- DMX Mode: Allows external control via a DMX controller. Refer to the DMX channel chart in the quick reference guide for specific functions.
- Standalone Mode: The fixture can operate independently using built-in automated programs or sound-activated programs. Use the control panel to select desired programs.
- Master/Slave Mode: Link multiple COREpar 80 USB fixtures to operate in synchronization without a DMX controller. Configure one unit as the master and others as slaves.
- IRC Remote Control (Optional): The fixture is compatible with the optional IRC remote for point-and-shoot control of static colors and automated programs.
5.3 Color Mixing and Beam Effects
The COB LED technology provides a full spectrum of light with excellent color mixing capabilities. Experiment with different color combinations to achieve desired effects.
Figure 3: Example of a green beam effect.
Figure 4: Example of a blue beam effect.
Figure 5: Example of a red beam effect.
6. Maintenance
6.1 Cleaning
Regular cleaning is recommended to maintain optimal light output and extend the fixture's lifespan. Use a soft, lint-free cloth to wipe the lens and housing. For stubborn dirt, a mild glass cleaner can be used on the lens, applied to the cloth first, not directly to the fixture.
6.2 Storage
When not in use, store the fixture in a dry, dust-free environment. If transporting, use appropriate protective cases to prevent damage.
7. Troubleshooting
If you encounter issues with your COREpar 80 USB, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not power on | No power supply; faulty power cord; internal fuse blown | Check power connection; test power cord; contact support if fuse is suspected |
| No DMX control | Incorrect DMX address; faulty DMX cable; DMX controller issue | Verify DMX address; test DMX cable; check DMX controller settings |
| Light output is dim or inconsistent | Overheating; dirty lens; incorrect mode setting | Ensure proper ventilation; clean the lens; check operating mode and dimmer settings |
If the problem persists after attempting these solutions, please contact CHAUVET DJ customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | COREPAR80USB |
| Brand | CHAUVET DJ |
| Light Source Type | Diode électroluminescente (LED) - COB |
| Maximum Power Consumption | 80 Watts |
| Power Source | Câble électrique (Corded Electric) |
| Weight | 4.2 pounds (1.9 kg) |
| Color | Noir (Black) |
| Features | Remote control compatibility, D-Fi USB compatibility, Magnetic lens |
| GTIN / UPC | 781462214050 |
9. Warranty and Support
For warranty information and technical support, please refer to the official CHAUVET DJ website or contact your authorized dealer. Keep your purchase receipt as proof of purchase for warranty claims.
Official CHAUVET DJ Website: www.chauvetdj.com
