CHAUVET DJ Intimidator Free Spot 60 ILS Instruction Manual

Introduction

The CHAUVET DJ Intimidator Free Spot 60 ILS is a 100% true wireless, battery-powered moving head spot fixture designed for professional lighting applications. It features a built-in D-FI transceiver and ILS compatibility, allowing seamless integration into the ILS ecosystem. This manual provides essential information for the safe and efficient operation of your Intimidator Free Spot 60 ILS.

Key features include:

• 100% TRUE wireless, battery-operated moving head spot with built-in D-FI transceiver.
• Adjustable run times to ensure the fixture lasts the length of your event.
• Built-in RF receiver for wireless control using optional RFC or RFC-XL remotes.
• ILS compatibility for use within the ILS ecosystem.
• Motorized focus for projecting crisp gobos from various distances.
• 3-facet prism to split the beam and cover a larger area.
• Innovative Totem mode to keep beams on the dance floor.
• Onboard charge and discharge protection circuitry for extended fixture lifespan.

Safety Information

Always follow these basic safety precautions to reduce the risk of fire, electric shock, or injury to persons:

• Read all instructions before using the product.
• Do not open the housing. There are no user-serviceable parts inside.
• Connect the product to a grounded circuit.
• Disconnect from power before servicing or cleaning.
• Do not operate if the power cord is damaged.
• Ensure proper ventilation to prevent overheating.
• Avoid direct eye exposure to the light source.
• Mount the fixture securely to a suitable structure.
• Keep flammable materials away from the fixture.

Setup

Unpacking

Carefully unpack the product and check the carton contents to ensure all parts are present and in good condition. If the box or contents appear damaged, notify the carrier immediately.

Mounting

The Intimidator Free Spot 60 ILS can be mounted in various orientations, including upright on a flat surface or inverted from a truss. Always use appropriate clamps and safety cables. Ensure the mounting surface or structure can support the weight of the fixture.

Image: Front view of the CHAUVET DJ Intimidator Free Spot 60 ILS. This image shows the main light head and base unit.

Image: Side view of the CHAUVET DJ Intimidator Free Spot 60 ILS. This image highlights the profile of the moving head and its base.

Power Connection

Connect the included power cable to the power input on the rear of the fixture and then to a suitable grounded power outlet. The fixture features onboard charge and discharge protection circuitry for battery longevity.

Image: Rear view of the CHAUVET DJ Intimidator Free Spot 60 ILS. This image displays the control panel, DMX ports, power input, and other connections.

Wireless Control Setup

The Intimidator Free Spot 60 ILS includes a built-in D-FI transceiver for wireless DMX operation and an RF receiver for control via optional CHAUVET DJ RFC or RFC-XL remotes. Refer to the specific remote control manual for pairing instructions. For D-FI, ensure other D-FI compatible fixtures are within range and set to the same D-FI channel.

The fixture is also ILS (Integrated Lighting System) compatible, allowing it to integrate seamlessly with other ILS products for synchronized light shows.

Operating Instructions

Control Panel Navigation

Use the display and buttons on the rear of the fixture to access menus and adjust settings. Typically, there are buttons for MENU, UP, DOWN, and ENTER to navigate through options such as DMX address, operating modes, and internal programs.

Operating Modes

The fixture supports various operating modes, including DMX control, sound-activated mode, and automated programs. Select the desired mode via the control panel or DMX controller.

• DMX Mode: Connect a DMX controller to the fixture's DMX input. Set the DMX address using the control panel. Refer to the DMX channel chart in the full manual for specific control parameters.
• Automated Programs: Utilize built-in programs for dynamic light shows without external control.
• Sound-Activated Mode: The fixture reacts to sound via its internal microphone. Adjust sensitivity as needed.
• ILS Mode: Integrate with other ILS products for synchronized control.

Features in Operation

• Motorized Focus: Adjust the focus of the gobo projection for sharp images at varying distances. This is typically controlled via DMX or a dedicated menu option.
• 3-Facet Prism: Engage the prism effect to split the light beam into multiple facets, covering a wider area and creating dynamic aerial effects.
• Totem Mode: Activate Totem mode to ensure the beams remain directed towards the dance floor or performance area, preventing accidental projection onto walls or ceilings.
• Adjustable Run Times: The battery-powered operation allows for adjustable run times. Configure this setting to optimize battery life for the duration of your event.
• Home Position: The new home position for the moving head allows for smoother programming by preventing a whip-around motion when looks are triggered.

Maintenance

Cleaning

Regular cleaning is recommended to maintain optimal light output and extend the fixture's lifespan. Use a soft, lint-free cloth and a mild glass cleaner for optical components. Do not use abrasive cleaners.

• Clean the exterior casing with a soft, dry cloth.
• Clean the lenses and mirrors periodically to ensure maximum light output.
• Ensure the fixture is disconnected from power before cleaning.

Battery Care

The Intimidator Free Spot 60 ILS features onboard charge and discharge protection circuitry to protect the battery. For best battery life, avoid fully discharging the battery frequently and store the fixture with a partial charge if not used for extended periods.

General Care

Periodically check all mounting hardware and connections for security. Ensure ventilation openings are clear of dust and debris.

Troubleshooting

If you encounter issues with your Intimidator Free Spot 60 ILS, refer to the following common problems and solutions:

• No Power:
  • Check the power cable connection to the fixture and the power outlet.
  • Ensure the power outlet is active.
  • Verify the battery is charged if operating wirelessly.
• No Light Output:
  • Check if the fixture is in a blackout mode or if the dimmer is set to 0%.
  • Verify DMX signal if in DMX mode.
  • Ensure the light source is not damaged (contact support if suspected).
• No Movement/Incorrect Movement:
  • Check DMX connections and address.
  • Ensure the fixture is not in a frozen or hold mode.
  • Perform a reset via the control panel if available.
• Wireless Control Issues:
  • Ensure the D-FI transceiver or RF remote is properly paired and within range.
  • Check for interference from other wireless devices.
  • Verify D-FI channels match across devices.

For persistent issues, contact CHAUVET DJ customer support.

Specifications