Izixhobo ze-PCE I-PCE-MPC 15 / PCE-MPC 25 Isibali seNqaku
Iincwadana zabasebenzisi kwiilwimi ezahlukeneyo
Amanqaku okhuseleko
Nceda ufunde le ncwadana ngononophelo kwaye ngokupheleleyo phambi kokuba usebenzise isixhobo okokuqala. Esi sixhobo sinokusetyenziswa kuphela ngabasebenzi abaqeqeshiweyo size silungiswe ngabasebenzi bePCE Instruments. Umonakalo okanye ukwenzakala okubangelwe kukungathobeli le ncwadana yemigaqo ayibandakanywanga kuxanduva lwethu kwaye ayifakwanga kwiwaranti yethu.
- Isixhobo kufuneka sisetyenziswe kuphela njengoko kuchaziwe kule ncwadana yemiyalelo. Ukuba isetyenziswe ngenye indlela, oku kunokubangela iimeko ezinobungozi kumsebenzisi kunye nomonakalo kwimitha.
- Isixhobo sinokusetyenziswa kuphela ukuba iimeko zokusingqongileyo (iqondo lobushushu, ukufuma okunxulumeneyo, …) ziphakathi koluhlu oluchazwe kwiinkcukacha zobugcisa. Musa ukusibeka esichengeni isixhobo kumaqondo obushushu agqithisileyo, ilanga elithe ngqo, ukufuma okugqithisileyo okanye ukufuma.
- Musa ukubeka isixhobo kwindawo yokothuka okanye iintshukumo ezinamandla.
- Ityala kufuneka livulwe kuphela ngabasebenzi abaqeqeshiweyo be-PCE Instruments.
- Ungaze usebenzise isixhobo xa izandla zakho zimanzi.
- Akufunekanga wenze naluphi na utshintsho lobugcisa kwisixhobo.
- Isixhobo kufuneka sicocwe kuphela ngentengisoamp ilaphu. Sebenzisa kuphela isicoci se-pH esingathathi hlangothi, kungabikho abrasives okanye izinyibilikisi.
- Isixhobo kufuneka sisetyenziswe kuphela kunye nezincedisi ezivela kwi-PCE Instruments okanye okufanayo.
- Ngaphambi kokusetyenziswa ngakunye, jonga imeko yomonakalo obonakalayo. Ukuba kukho umonakalo obonakalayo, musa ukusebenzisa isixhobo.
- Musa ukusebenzisa isixhobo kwindawo eneziqhushumbisi.
- Uluhlu lwemilinganiso njengoko luchaziwe kwiinkcukacha kufuneka lungagqithiswa phantsi kwazo naziphi na iimeko.
- Ukungahoywa kwamanqaku okhuseleko kunokubangela umonakalo kwisixhobo kunye nokwenzakala kumsebenzisi.
Asithabathi butyala kwiimpazamo zoshicilelo okanye naziphi na ezinye iimpazamo kule ncwadana. Sikhomba ngokucacileyo kwimigaqo yethu yesiqinisekiso ngokubanzi enokufumaneka kwimigaqo yethu yeshishini ngokubanzi.
Iinkcukacha
| Ukugxininiswa kobuninzi | |
| Ubungakanani bamasuntswana anokulinganiswa | PM2.5 / PM10 |
| Uluhlu lomlinganiselo PM 2.5 | 0 … 1000 µg/m³ |
| Isigqibo | 1µm |
| Ukuchaneka PM 2.5 | 0 … 100 µg/m³: ±10 µg/m³
101 … 1000 µm/m³: ±10 % yerdg. |
| Ikhawuntara yesuntswana | |
| Ubungakanani bamasuntswana anokulinganiswa (PCE-MPC 15) | 0.3 / 0.5 kunye ne-10 µm |
| Ubungakanani bamasuntswana anokulinganiswa (PCE-MPC 25) | 0.3 / 0.5 / 1.0 / 2.5 / 5.0 kunye ne-10 µm |
| Isigqibo | 1 |
| Ukuchaneka | imilinganiselo ebonisayo kuphela |
| Elona nani liphezulu lamasuntswana | 2,000,000 amasuntswana/l |
| Ubushushu | |
| Uluhlu lomlinganiselo | -10 … 60 °C, 14 … 140 °F |
| Isigqibo | 0.01 °C, °F |
| Ukuchaneka | ±2 °C, ±3.6 °F |
| Ukufuma (RH) | |
| Uluhlu lomlinganiselo | 0… 100% |
| Isigqibo | 0.01% |
| Ukuchaneka | ±3% |
| Eminye ingcaciso | |
| Ixesha lokuphendula | 1 umzuzwana |
| Isigaba sokuzifudumeza | Imizuzwana engama-10 |
| Ukunyuka uqhagamshelwano | 1/4″ uqhagamshelo lwe-tripod |
| Imilinganiselo yokuthatha | ngaphandle: 13 mm / 0.51″
ngaphakathi: 7mm / 0.27″ ubude: 35mm / 1.37″ |
| Bonisa | 3.2″ LC ukubonisa umbala |
| Ubonelelo lwamandla (iadaptha engundoqo) | ephambili: 100 … 240 V AC, 50 / 60 Hz, 0.3 A
okwesibini: 5 V DC, 2 A |
| Ubonelelo lwamandla (ibhetri egcwalisekayo) | 18650, 3.7 V, 8.14 Wh |
| Ubomi bebhetri | malunga. iiyure ezingama-9 |
| Umbane ozenzekelayo icinyiwe | icimile
15, 30, 45 imizuzu 1, 2, 4, 8 iiyure |
| Imemori yedatha | inkumbulo flash malunga. Imijikelo yokulinganisa ili-12
Umjikelo omnye wokulinganisa uneendawo zokulinganisa ezingama-999 |
| Ixesha lokugcinwa | 10, 30 imizuzwana
1, 5, 10, 30, 60 imizuzu |
| Imilinganiselo | 222 x 80 x 46 mm / 8.7 x 3.1 x 1.8 |
| Ubunzima | 320 g / 11.2 oz |
Ubungakanani bonikezelo
- I-1 x i-particle counter PCE-MPC 15 okanye i-PCE-MPC 25
- 1 x ingxowa ephetheyo
- 1 x 18650 ibhetri egcwalisekayo
- I-1 x i-tripod encinci
- 1 x Intambo ye-Micro-USB
- 1 x iadaptha ye-USB engundoqo
- 1 x incwadi yomsebenzisi
Inkcazo yesixhobo
| Hayi. | Inkcazo |
| 1 | Inzwa yobushushu kunye nokufuma |
| 2 | Bonisa |
| 3 | Ikhibhodi |
| 4 | Ukungenisa |
| 5 | Ujongano lweMicro-USB |
| 6 | Indawo yokukhupha umoya |
| 7 | Uqhagamshelwano lwetripod |
| 8 | Indawo yebhetri |
| Hayi. | Inkcazo |
| 1 | "ENTER" iqhosha lokuqinisekisa ungeniso kunye nokuvula izinto zemenyu |
| 2 | “IGRAPH” iqhosha lokutshintshela kumzobo view |
| 3 | "MODE" iqhosha lokutshintsha indlela kunye nokuhamba ngasekhohlo |
| 4 | Vula/vala iqhosha lokuvula nokucima imitha kunye nokuphuma kwisethingi yeparamitha. |
| 5 | "ALARM VALUE" iqhosha lokuseta umda we-alam kunye nokuya phezulu |
| 6 | Iqhosha lesithethi ukwenza kunye nokuvala i-alam ye-acoustic |
| 7 | "SET" iqhosha lokuvula iiparamitha kwaye ujonge ngasekunene |
| 8 | “°C/°F” iqhosha lokukhetha iyunithi yobushushu kunye nokuhla |
Ukuvula nokucima imitha
Ukuvula nokucima imitha, cofa kwaye uyeke iqhosha lokuvula/lokucima kube kanye. Emva kwenkqubo yokuqalisa, umlinganiselo uqala ngoko nangoko. Ukufumana amaxabiso alinganisiweyo angoku, vumela imitha idwebe emoyeni wegumbi langoku kwimizuzwana eyi-10 yokuqala.
View isakhiwo
Ukukhetha phakathi komntu views, cofa iqhosha elithi "SET" ngokuphindaphindiweyo. Umahluko views zezi zilandelayo.
| View | Inkcazo |
| Ifestile yokulinganisa | Amaxabiso alinganisiweyo aboniswe apha |
| "Iirekhodi" | Idatha yomlinganiselo ogciniweyo ingaba viewed apha |
| "Iisetingi" | Iisetingi |
| “PDF” (PCE-MPC 25 kuphela) | Idatha egciniweyo ingacwangciswa apha |
Ifestile yokulinganisa
Umzobo view
Ukutshintshela kumzobo view, cofa iqhosha elithi “GRAPH”. Apha, ikhosi ye-PM2.5 yoxinaniso iboniswa. Sebenzisa utolo oluphezulu/ezantsi amaqhosha ukuskrola phakathi kwamaphepha ngamanye. Cofa iqhosha elithi "GRAPH" kwakhona ukuze ubuyele kwinani view.
Phawula: Ukufikelela kwindawo ethile yokulinganisa, yiya kwindawo ethi "Iirekhodi" view, bona 6.2 Iirekhodi
Inani lamasuntswana kunye noxinaniso lobuninzi
Ukutshintsha phakathi kokubalwa kwamasuntswana kunye noxinaniso lobunzima, cofa iqhosha elithi "MODE".
Seta umda we-alam
Ukuseta ixabiso eliqingqiweyo le-alam, cofa iqhosha elithi "ALARM VALUE" kwifestile yokulinganisa. Ixabiso lingatshintshwa ngezitshixo zotolo. Cofa iqhosha elithi "ENTER" ukwamkela ixabiso elimiselweyo. Ukuvula okanye ukuyekisa i-alam, cofa iqhosha lesithethi. Ukuba isithethi siboniswe kwi-PM2.5, i-alam ye-acoustic iyasebenza.
Phawula: Eli xabiso lomda we-alam libhekisa kuphela kwixabiso le-PM2.5.
Iirekhodi
"Kwiirekhodi" view, amanqaku okulinganisa arekhodiweyo ngoku anokuba viewed. Ukukhetha phakathi kwamanqaku omlinganiselo omnye, cofa kuqala iqhosha elithi “ENTER”. Emva koko sebenzisa izitshixo zotolo ukuya kwindawo yomlinganiselo oyifunayo. Cofa iqhosha elithi "ENTER" kwakhona ukuze ukwazi ukukhetha phakathi kwe views kwakhona.
Iisetingi
Ukwenza useto, cofa kuqala iqhosha elithi “ENTER”. Iparamitha ngoku ingakhethwa ngezitshixo zotolo oluphezulu/ezantsi. Sebenzisa amaqhosha asekhohlo nasekunene ukutshintsha iparameter efanelekileyo. Cofa iqhosha elithi "ENTER" ukuze uqinisekise useto.
| Ukumisela | Intsingiselo |
| CIMA isibane sangasemva | Ukuseta isibane sangasemva |
| Rekhoda isithuba | Ukuseta ixesha lokurekhoda.
Phawula: xa isithuba sekhefu sisetiwe, ukurekhoda kuqalisa ngoko nangoko. Ubungakanani idatha yokulinganisa erekhodiweyo inokubonwa kwifestile yokulinganisa. |
| Ukuqaqamba | Ukumisela ukukhanya |
| Idatha icacile | Ukucima idatha yomlinganiselo orekhodiweyo.
Phawula: Oku akunampembelelo kwisithuba sememori yeePDF esele zigciniwe. |
| Ixesha & Umhla | Ukumisela umhla kunye nexesha |
| Ukucima okuzenzekelayo | Cwangcisa umbane ozenzekelayo |
| Ulwimi | Seta ulwimi |
| Lungisa kwakhona | Seta kwakhona imitha kwisetingi zasefektri |
Iisetingi zasefektri
Ukuba imitha isetyenzisiwe njengoko kuchaziwe ku-6.3 Useto, ulwimi luya kuzitshintshela kwisiTshayina ngokuzenzekelayo. Ukutshintsha ulwimi lwemenyu ubuyele kwisiNgesi, tshintshela imitha, cinezela iqhosha elithi "SET" kabini, khetha into yesibini yokugcina kwaye ucinezele iqhosha elithi "SET" kwakhona.
Ukuthunyelwa kwedatha yomlinganiselo "PDF" (PCE-MPC 25 kuphela)
Vula "PDF" view ngokucofa ngokuphindaphindiweyo iqhosha elithi “SET”. Ukukhuphela ngaphandle idatha yokulinganisa erekhodiweyo, khetha kuqala "Thumela ngaphandle iPDF". Idatha erekhodiweyo idityaniswa ibe yiPDF file. Emva koko qhagamshela imitha kwikhompyuter kwaye ukhethe "Xhuma kwi-USB" kwisixhobo ukuqhagamshela kwikhompyuter. Kwikhompyuter, imitha iboniswa njengesixhobo sogcino lwedatha eninzi kwaye iiPDF zinokukhutshelwa. Nge "Formatted Disk", imemori yedatha yobuninzi inokususwa. Oku akunampembelelo kwidatha yomlinganiselo erekhodiweyo ngoku. Ukubuyela kukhetho lwe views, buyela umva kwiqhosha elithi "Shift" elinezitshixo zotolo.
Ibhetri
Intlawulo yebhetri yangoku inokufundwa kwisalathisi somgangatho webhetri. Ukuba ibhetri ithe tyaba, kufuneka itshintshwe okanye ihlawulwe nge-Micro-USB interface. A 5 V DC 2 Kufuneka kusetyenziswe umthombo wamandla ukutshaja ibhetri.
Ukutshintsha ibhetri, qala ngokuyicima imitha. Emva koko vula indawo yebhetri ngasemva kwaye ubuyisele ibhetri. Qinisekisa i-polarity echanekileyo.
Qhagamshelana
Ukuba unayo nayiphi na imibuzo, iingcebiso okanye iingxaki zobugcisa, nceda unganqikazi ukuqhagamshelana nathi. Uya kufumana iinkcukacha zoqhagamshelwano ezifanelekileyo ekupheleni kwale ncwadana yomsebenzisi.
Ukulahlwa
Ngokulahlwa kweebhetri kwi-EU, umyalelo we-2006/66/EC wePalamente yaseYurophu uyasebenza. Ngenxa yezingcolisi eziqulathiweyo, iibhetri akufunekanga zilahlwe njengenkunkuma yasekhaya. Zifanele zinikwe kwiindawo zokuqokelela ezenzelwe loo njongo. Ukuze sithobelane nomyalelo we-EU 2012/19/EU sibuyisela izixhobo zethu. Sinokuphinda sizisebenzise kwakhona okanye sizinike inkampani erisayikilisha elahla izixhobo ngokuhambelana nomthetho. Kumazwe angaphandle kwe-EU, iibhetri kunye nezixhobo kufuneka zilahlwe ngokuhambelana nemimiselo yenkunkuma yendawo yakho. Ukuba unayo nayiphi na imibuzo, nceda uqhagamshelane ne-PCE Instruments.
Jemani
PCE Deutschland GmbH Im Langel 26 D-59872 Meschede Deutschland
- Umnxeba.: +49 (0) 2903 976 99 0
- Ifeksi: +49 (0) 2903 976 99 29
- info@pce-instruments.com
- www.pce-instruments.com/deutsch
Iunited kingdom
PCE Instruments UK Ltd Unit 11 Southpoint Business Park Ensign Way, Southampton Hampshire United Kingdom, SO31 4RF
- Umnxeba: +44 (0) 2380 98703 0
- Ifeksi: +44 (0) 2380 98703 9
- info@pce-instruments.co.uk
- www.pce-instruments.com/english
Ilizwe elidibene lasemelika
PCE Americas Inc. 1201 Jupiter Park Drive, Suite 8 Jupiter/ Palm Beach 33458 FL USA
- Umnxeba:+1 561-320-9162
- Ifeksi: +1 561-320-9176
- info@pce-americas.com
- www.pce-instruments.com/us
Amaxwebhu / Izibonelelo
 |
Izixhobo ze-PCE I-PCE-MPC 15 / PCE-MPC 25 Isibali seNqaku [pdf] Incwadi yokusebenzisa I-PCE-MPC 15 i-PCE-MPC i-25 ye-Particle Counter, i-PCE-MPC 15, i-PCE-MPC i-25 ye-Particle Counter, i-Particle Counter, i-Counter |
