I-LIGHTRONICS TL3012 i-Memory Control Console

INGCACISO

• Imijelo: 12
• Iindlela zokusebenza: Imowudi yeSicene seMibini yokuSeta kwangaphambili Imowudi yokudlala kwakhona Imowudi yokuleqa
• Inkumbulo yescene: Imiboniso ye-24 iyonke kwiibhanki ezi-2 ze-12 nganye
• Leqa: 12 ecwangcisiweyo 12-inyathelo ukuleqa
• Iprothokholi yokulawula: DMX-512 Ngokuzikhethela i-LMX-128 (multiplex)
• Isiphumo seqhagamshela: Isidibanisi se-5-pin se-XLR se-DMX (Ngokhetho yongeza kwi-3 ipini ye-XLR ye-LMX) (I-3 ipini enye ye-XLR ye-DMX ukhetho lukwakhona)
• Ukuhambelana: Iprotocol ye-LMX-128 iyahambelana nezinye iisistim eziphindaphindwayo
• Ungeniso lwamandla: 12 VDC, 1 Amp unikezelo lwamandla lwangaphandle lubonelelwe
• Imilinganiselo: 10.25” WX 9.25” DX 2.5” H

INKCAZO

I-TL3012 yi-compact, ephathekayo, i-digital dimmer controller. Inika iziteshi ezili-12 zolawulo lwe-DMX-512 nge-5-pin XLR isixhumi. Inokubonelela ngokuzikhethela imveliso ye-LMX-128 kwi-3 pin XLR isinxibelelanisi. Inketho yokuba nesidibanisi esiphumayo esinye njenge-3 pin XLR isidibanisi esine-DMX siyafumaneka. I-TL3012 isebenza kwimodi ye-2-scene manual okanye inokubonelela ngee-24 ze-preset scenes ezihlelwe kwiibhanki ze-2 ze-12 izigcawu nganye. Iipateni ezilishumi elinesibini zokuleqa ezichazwe ngumsebenzisi zihlala zikhona. Izinga lokuphela kwescene, izinga lokuleqa kunye nesantya sokuleqa isantya zilawulwa ngumsebenzisi. I-Audio inokusetyenziswa njengolawulo lokuleqa. Ezinye iimpawu zeTL3012 ziquka i-master fader, amaqhosha okwethutyana, kunye nokulawula ukucima. Imiboniso kunye nokuleqa okugcinwe kwiyunithi ayilahleka xa iyunithi icinyiwe.

UKUFAKWA

Ikhonsoli yolawulo ye-TL3012 kufuneka igcinwe kude nokufuma kunye nemithombo ethe ngqo yobushushu. Iyunithi yenzelwe ukusetyenziswa kwangaphakathi kuphela.
UQHAGAMSHELO lwe-DMX: Xhuma iyunithi kwi-DMX Universe usebenzisa intambo yokulawula ene-5 pin XLR connectors. Unikezelo lwamandla lwangaphandle kufuneka lusetyenziswe ukuba kuphela isinxibelelanisi seDMX esisetyenziswayo. Isidibanisi se-3 pin ye-XLR ye-DMX endaweni ye-5 pin isiqhagamshelanisi se-XLR sikwayindlela yokukhetha. I-LMX Connections: Xhuma iyunithi kwi-Lightronics (okanye ehambelanayo) i-dimmer usebenzisa intambo yokulawula i-multiplex kunye ne-3 pin XLR connectors. I-TL3012 inokunikwa amandla ngolu xhulumaniso nge-dimmer(s) edityaniswe kuyo. Inokuthi inikwe amandla ngokusebenzisa unikezelo lwamandla lwangaphandle olukhethiweyo. Olu khetho alufumaneki ukuba i-3 pin XLR isiqhagamshelanisi ukhetho lwe-DMX lukhethiwe.

I-DMX-512 i-Connector Wiring 5 PIN OKANYE 3 PIN IBHINQA XLR

5-PIN #	3-PIN #	IGAMA LOMQONDISO
1	1	Eqhelekileyo
2	2	Idatha ye-DMX-
3	3	Idatha ye-DMX +
4	–	Ayisetyenziswa
5	–	Ayisetyenziswa

I-LMX-128 yoNxibelelaniso lweeNcingo (3 PIN FEMALE XLR)

I-PIN #	IGAMA LOMQONDISO
1	Eqhelekileyo
2	Phantom amandla ukusuka dimmers Ngokuqhelekileyo +15VDC
3	Isiginali ye-LMX-128 yokuphindaphinda

Ukuba usebenzisa i-audio ukulawula ukuleqa - qinisekisa ukuba imingxuma ye-microphone ngasemva kweyunithi ayigqunywanga. Kuya kufuneka ujonge useto lwedilesi yee-dimmers ngaphambi kokuba uqhubeke nomsebenzi we-TL3012.

ULAWULO KUNYE NEZALATHI

• IiFaders ze-SCINE INCWADI: Lawula amanqanaba ejelo ngalinye.
• UKUFAKA OKUMNQAMLEKO: Utshintshelo phakathi koseto lwefader kunye nemiboniso egciniweyo. Ikwasetyenziselwa ukulawula izinga lokuleqa.
• KOPISHA INCWADANA YEENKONZO: Irekhoda useto lwefader kwimemori yescene yesandla. Amaqhosha omzuzwana: Vula amajelo anxulumeneyo ngokuqina ngokupheleleyo ngelixa ucinezelwe. Zikwasetyenziselwa ukukhetha ukuleqa, ukhetho lwendawo ebuyiselweyo, kunye nokukhethwa kwenqanaba lendawo yokufiphala.
• TAP IQhosha: Cinezela amaxesha amathathu nangaphezulu ngesantya esifunekayo ukuseta isantya sokuleqa.
• TAP isalathisi: Ibonisa inqanaba lokuleqa.
• BLACKOUT Iqhosha: Ivula kwaye ivale imveliso ye-console kuyo yonke imiboniso, amajelo, kunye nokuleqa.
• BLACKOUT isalathisi: Ilayitiwe xa ukucima kuvuliwe.
• MASTER Fader: Ukulungelelanisa inqanaba lemveliso yayo yonke imisebenzi ye-console.
• IQHOSHA LEREKHODI: Isetyenziselwa ukurekhoda imiboniso kunye nokusukela amanyathelo.
• Isalathisi EREKHODI: Ukulenyaza xa uleqa okanye ushicilelo lwendawo lusebenza.
• Ukulawulwa kwe-AUDIO: Lungisa ubuntununtunu bokuleqa kwimayikrofoni yomsindo yangaphakathi.
• I-AUDIO Isalathisi: Ibonisa ukuba ulawulo lokusukela umsindo luyasebenza. FADE RATE Iqhosha: Ivumela amaqhosha okwethutyana ukuba asetyenziswe ukuseta umboniso welizwe jikelele.
• CHASE Iqhosha: Ivumela amaqhosha ethutyana ukuba asetyenziswe ukukhetha inani lokuleqa.
• IBHNKI engu-A kunye ne-B: Khetha ibhanki yemboniso A okanye B kwaye wenze amaqhosha okwethutyana asetyenziswe ukukhetha inombolo yesiganeko ngaphakathi kwebhanki enxulumene nayo.
• ILEQA UMLINGO WOKUPHILA: Ifunda i CROSSFADER useto njengeseto yokuleqa idede.

TL3012 UBUSO VIEW

IINDLELA ZOKUSEBENZA

I-TL3012 ineendlela ezi-3 zokusebenza:

1. Imowudi yeManuwali yeeNkcukacha ezimbini.
2. Seta kwangaphambili iMowudi yeNdawo.
3. Chase Imowudi.

Ukusebenza ngokubanzi kweyunithi kwindlela nganye kuchazwe ngezantsi. Imowudi yeSicene seMibini: Qala ngokusa "CROSS FADER" phezulu (ukuya kwindawo yeMANUAL). Iifaders eziphezulu ze-12 ziya kulawula amajelo aphumayo. Ukuba utyhala “COPY MANUAL TO MEMORY” useto lwefader luzakukhutshelwa kwinkumbulo yescene yesandla kwiyunithi. Ngeli xesha ungahambisa i-"CROSS FADER" kwindawo ye-MEMORY. Ulwazi lwetshaneli ngoku lubonelelwa ngedatha yememori osanda kuyikhuphela kwiifaders. Iifader ezili-12 eziphezulu ngoku zikhululekile kwaye zinokushukunyiswa ngaphandle kokuphazamisa amajelo aphumayo kuba imemori ngoku ibonelela ngemveliso yesitishi. Ungaseta umfanekiso wakho OKULANDELAYO kwiifader ezili-12 eziphezulu. Xa ususa i-"CROSS FADER" ubuyele kwi-MANUAL isikhundla - iyunithi iya kuphinda ithathe ulwazi lwetshaneli yayo kwiifaders. Ngokuqhubeka ngale ndlela ungasoloko usenza indawo yakho elandelayo kwaye emva koko ucimeke kuyo nge-CROSS FADER. Umsebenzi othi "KOPIA IMANUAL TO MEMORY" urekhoda ekupheleni komlinganiselo obekiweyo wokuphela kwemboniso. Kuya kufuneka ushiye iifaders “MANUAL SCENE” zikwimeko ezinzileyo ngeli xesha okanye akunakurekhoda indawo ngokuchanekileyo. Seta kwangaphambili Imo Yendawo: Kule modi, ungenza kusebenze uthotho ukuya kuthi ga kwimiboniso engama-24 oyicwangcisiweyo okanye uyicwangcise kwangaphambili. Le miboniso igcinwe kwiibhanki ze-2 ze-12 izigcawu nganye. Le nkumbulo yahlukile kwimemori echazwe kwiNkqubo yeSicene seMibini yokusebenza apha ngasentla. Umyinge we-inter-scene fade rate uyalawuleka kwaye ungenza imiboniso isebenze kuyo nayiphi na indlela oyifunayo. Imiboniso emininzi inokubakho ngexesha elinye (kuquka imiboniso evela kuzo zombini iibhanki A no-B). Ukuba imiboniso emininzi esetwe kwangaphambili ivuliwe ke iya kudityaniswa “ngeyona ndlela ibalaseleyo” ngokubhekisele kwisitishi ngasinye. Ushicilelo lwendawo ethile kunye nemiyalelo yokudlala inikwe kule ncwadana.
Imo yokuleqa: Kule mowudi uthotho lweepateni zokukhanya zithunyelwa ngokuzenzekelayo kwiidimmers. Ukuya kuthi ga kwi-12 iipateni zokuleqa kunokudalwa ngumqhubi. Ipateni yokuleqa nganye inokuqulatha ukuya kuthi ga kwizinyathelo ezili-12. Inqanaba lenyathelo lokusukela kunye nexesha le-step fade nalo linokulawulwa. Amaxesha enyathelo asenokumiselwa ixesha elide. Oku kuya kukhokelela kwinto ebonakala ngathi yimbonakalo ecothayo ezenzekelayo. Imiyalelo ethe ngqo yokudala nokuleqa inikwe ngakumbi kule ncwadana. Ukuleqa kukodwa (Kunye kuphela okunokuqhutywa ngexesha elithile.).

UKUREKHODA IZIGANEKO ZESISEKENI

1. Lungisa iifaders ze-MANUAL SCENE ukuya kumanqanaba anqwenelekayo (yenza umboniso).
2. Cofa u-"SCENE BANK" ukutshintshela kwibhanki yemboniso oyifunayo (A okanye B).
3. Cofa "RECORD".
4. Cinezela iqhosha lomzuzwana (1 -12) ukurekhoda useto lwefader njengomboniso.

SETYENZISWA NGENXA YOKUDLALWA KOMTHETHO
QAPHELA: “I-CROSS FADER” mayibe kwindawo ye-MEMORY ukuze ivule imiboniso esetwe kwangaphambili.

1. Cofa iqhosha elithi "SCENE BANK" ukutshintshela kwibhanki yemboniso oyifunayo (A okanye B).
2. Cofa iqhosha lomzuzwana (1-12) kumboniso ofuna ukuwuvula.

IXESHA IXESHA LOKUPHELA KWESIGANEKO
Izinga lokuphela kwemiboniso esetwe kwangaphambili linokusetwa phakathi kwe-0 kunye ne-12 imizuzwana kwaye lisebenza jikelele kuyo yonke imiboniso esetwe kwangaphambili. Umyinge wokuphela kwendawo esetwe kwangaphambili unokusetwa nanini na.

1. Tyhiliza "FADE RATE". Isalathisi se-FADE RATE siya kukhanya.
2. Cofa elinye lamaqhosha okwethutyana (1-12) ukuseta izinga. Iqhosha lasekhohlo ngu 1 umzuzw.. Ekunene yi 12 imizuzwana. Ungacwangcisa ireyithi yokufiphala kwesibini (ngoko nangoko) ngokucofa iqhosha lomzuzwana elinesalathisi salo esikhanyisiweyo.
3. Nje ukuba ukhethe umlinganiselo wokuphela – tyhala “FADE RATE”. Isalathisi seFADE RATE siya kuphuma kwaye iyunithi iya kubuyela ekusebenzeni okuqhelekileyo.

UKUREKHODA OKUNGXELEKILEYO

1. Cofa "RECORD". IREKHODI ye-LED iya kuqalisa ukudanyaza.
2. Cofa "CHASE". Oku kubangela ukuba amaqhosha okwethutyana (1-12) asebenze njengabakhethi bamanani abaleqayo.
3. Cofa iqhosha lomzuzwana (1-12) ukukhetha inombolo yokuleqa yokurekhoda.
4. Sebenzisa iifaders ze-MANUAL SCENE ukuseta ubunzulu betshaneli kwinyathelo lokuleqa LOKUQALA.
5. Cinezela "RECORD" ukugcina useto kwaye uqhubele phambili kwinyathelo elilandelayo lokuleqa. IREKHODI ye-LED iya kuqhubeka idanyaza kwaye iyunithi ilungele ukurekhoda inyathelo elilandelayo.
6. Phinda amanyathelo 4 kunye ne-5 kumanyathelo alandelayo kwaye alandelayo de onke amanyathelo afunekayo ashicilelwe (ukuya kumanyathelo ali-12).
7. Cinezela iqhosha lethutyana (1-12) ukwenzela ukuleqa kucwangciswe ukuphelisa inkqubo yokurekhoda. Ukuba urekhoda onke amanyathelo ali-12, cofa iqhosha elithi "CHASE" ukuphelisa inkqubo yokurekhoda.

ILEQA UKUDLALA

1. Cinezela iqhosha elithi “TAP” izihlandlo ezi-3 okanye ngaphezulu ngesantya esifunekayo ukuseta isantya sokuleqa.
2. Cofa "CHASE". Oku kubangela ukuba amaqhosha okwethutyana (1-12) asebenze njengabakhethi bamanani abaleqayo.
3. Cofa iqhosha lomzuzwana (1-12) ukuleqa ofuna ukulenza. Ukuleqa kuya kuqalisa ukusebenza.

Ixesha lokuleqa inyathelo lilawuleka ngolu hlobo lulandelayo: Ngelixa ukuleqa kuqhuba – hambisa i-CROSS FADER ukuseta ixesha lokucima (0–100% yobude benyathelo) emva koko utyhale “CHASE FADE RATE” ukufunda i-fader kwaye utshixe kwireyithi. . Ukucima ukuleqa: Cofa "CHASE". Isalathisi se-Chase kunye nesinye sezikhombisi zexeshana ziya kukhanyiswa. Cofa iqhosha lomzuzwana elihambelana nesalathisi. Ukusukelana kuya kumisa kwaye isalathisi siya kuphuma. Cofa "CHASE" ukuze ungakhethi ukuseta ukuleqa. Isalathisi sokusukela i-amber siya kuphuma. Umsebenzi we "BLACKOUT" uya kuthintela ukuleqa xa usebenza.
I-AUDIO EQHELEKILEYO
Ireyithi yokuleqa inokulawulwa yimakrofoni efakwe ngaphakathi. Imakrofoni ithatha izandi ezikufutshane kunye nokujikeleza kwi-TL3012 ihluza zonke kodwa izandi eziphantsi. Isiphumo kukuba ukuleqa kuya kulungelelanisa kunye namanqaku e-bass omculo odlalwa kufutshane. Jikelezisa ulawulo lwe-“AUDIO” ngokwewotshi ukwandisa ubuntununtunu bemakrofoni. Olu lawulo luvaliwe xa lujikwe ngokupheleleyo ngasekhohlo.
LMX UKUSEBENZA
Ukuba ukhetho lwe-LMX lufakiwe, i-TL3012 iya kuhambisa zombini i-DMX kunye ne-LMX iimpawu ngaxeshanye. Ukuba amandla e-TL3012 anikezelwa yi-LMX dimmer nge-pin 2 ye-LMX - XLR isixhumi, ngoko ukunikezelwa kwamandla angaphandle akufuneki. Ukhetho lwe-LMX alufumaneki ukuba ukhetho lwe-3-pin XLR lwe-DMX lukhethiwe.
KHAWULEZA IMIYALELO
Iqweqwe elisezantsi le-TL3012 liqulethe imiyalelo emifutshane yokusebenzisa imiboniso kunye nokusukela. Imiyalelo ayenzelwanga endaweni yale ncwadana kwaye ifanele ukuba viewed njenge "izikhumbuzo" zabaqhubi abasele beqhelene nokusebenza kweTL3012.

UKULONDOLOZA NOKULUNGISA

UKULUNGISA INGXAKI
Khangela ukuba i-AC okanye i-DC amandla ombane inika amandla kwi-console ye-TL3012 Ukwenza lula ukulungisa iingxaki - cwangcisa iyunithi ukubonelela ngeseti eyaziwayo yeemeko. Qinisekisa ukuba ukutshintshwa kwedilesi ye-dimmer kusetelwe kumajelo afunwayo.
UKULONDOLOZA KOMNINI
Eyona ndlela ingcono yokwandisa ubomi be-TL3012 yakho kukuyigcina yomile, ipholile, icocekile, kwaye IYAQHUTYWA xa ingasetyenziswa. Umphandle weyunithi unokucocwa kusetyenziswa ilaphu elithambileyo dampifakwe ngesicoci esiphakathi/umxube wamanzi okanye isicoci sodidi lwesitshizi esiphakathi. MUSA UKUTSHELA NALUPHI NA ULWEMI ngqo kwiyunithi. MUSA UKUTSHINTSHA iyunithi kulo naluphi na ulwelo okanye uvumele ulwelo ukuba lungene kulawulo. UNGAZISEBENZISI naziphi na izicoci ezisekwe kwi-solvent okanye ezibolileyo kwiyunithi. Iifader azicocekanga. Ukuba usebenzisa i-cleaner kuzo - iya kususa i-lubrication kwiindawo ezijikelezayo. Xa oku kusenzeka akukwazeki ukuba uphinde uzithambise. Imicu emhlophe ngaphezulu kweefaders ayigqunywanga yi-TL3012 warranty. Ukuba uphawula kuzo nayiphi na inki esisigxina, ipeyinti, njl., kunokwenzeka ukuba awuyi kukwazi ukususa amanqaku ngaphandle kokulimaza imicu. Akukho malungu asebenzisekayo kwiyunithi. Inkonzo engenye ngaphandle kweearhente ezigunyazisiweyo zeLightronics ziya kuyiphelisa iwaranti yakho.

INGCACISO YOKUBONELELA AMANDLA NGAPHANDLE
I-TL3012 inokunikwa amandla ombane wangaphandle ngezi nkcukacha zilandelayo:

• Imveliso Voltage: 12 VDC
• Imveliso yangoku: 800 milliamps ubuncinci
• Isidibanisi: 2.1mm isinxibelelanisi sowesifazane
• iPin yombindi: Okuhle (+) polarity

UKUSEBENZA NOKULONDOLOZA
Umthengisi kunye nabasebenzi be-Lightronics Factory banokukunceda ngeengxaki zokusebenza okanye zokulungisa. Nceda ufunde iindawo ezifanelekileyo zale ncwadana ngaphambi kokuba ucele uncedo. Ukuba inkonzo iyafuneka - qhagamshelana nomthengisi othenge kuye iyunithi okanye uqhagamshelane neLightronics, iSebe leNkonzo, 509 Central Drive, Virginia Beach, VA 23454 TEL: 757-486-3588.

ISIQINISEKISO

Zonke iimveliso ze-Lightronics ziqinisekisiwe kwithuba leminyaka EMIBINI/EMIHLANU ukususela kumhla wokuthenga ngokuchasene neziphene kwizinto zokusebenza kunye nokusebenza. Esi siqinisekiso sixhomekeke kwezi zithintelo kunye neemeko zilandelayo:

• Ukuba inkonzo iyafuneka, unokucelwa ukuba unikeze ubungqina bokuthenga kumthengisi weLightronics ogunyazisiweyo.
• IWARANTI YEMINYAKA EMIHLANU isebenza kuphela ukuba ikhadi lewaranti libuyiselwe kwaLightronics likhatshwa nekopi yerisithi yoqobo yokuthenga phakathi kwe-30 DAYS yomhla wokuthenga, ukuba akunjalo ke iWARRANTY YEMINYAKA EMIBINI iyasebenza. Iwaranti isebenza kuphela kumthengi wokuqala weyunithi.
• Esi siqinisekiso asisebenzi kumonakalo obangelwa kukuxhatshazwa, ukusetyenziswa kakubi, iingozi, ukuthunyelwa, kunye nokulungiswa okanye ukulungiswa nguye nabani na ngaphandle kommeli ogunyazisiweyo wenkonzo yeLightronics.
• Le waranti ayinanto ukuba inombolo yesiriyali isusiwe, itshintshiwe okanye yonakalisiwe.
• Esi siqinisekiso asiyifaki ilahleko okanye umonakalo, ngokuthe ngqo okanye ngokungathanga ngqo ovela kusetyenziso okanye ukungakwazi ukusebenzisa le mveliso.
• I-Lightronics inelungelo lokwenza naluphi na utshintsho, uhlengahlengiso, okanye uhlaziyo njengoko lubonwa lufanelekile yiLightronics kwiimveliso ezibuyiselwe inkonzo. Olo tshintsho lunokwenziwa ngaphandle kokwaziswa kwangaphambili kumsebenzisi kwaye ngaphandle kokwenza naluphi na uxanduva okanye uxanduva lohlengahlengiso okanye utshintsho kwisixhobo ebesinikezelwe ngaphambili. I-Lightronics ayinaxanduva lokubonelela ngezixhobo ezitsha ngokuhambelana nazo naziphi na iinkcukacha zangaphambili.
• Esi siqinisekiso kuphela kwewaranti enokuthi ichazwe, ichaziwe, okanye isemthethweni, apho isixhobo sithengwa khona. Akukho bameli, abathengisi okanye nabaphi na kwiiarhente zabo abagunyazisiweyo ukuba benze naziphi na iziqinisekiso, iziqinisekiso, okanye umelo ngaphandle kokuchazwa apha.
• Esi siqinisekiso asibandakanyi iindleko zeemveliso zokuthumela ngenqanawa ukuya okanye ukusuka kwiLightronics ngenkonzo.
• I-Lightronics Inc. inelungelo lokwenza utshintsho njengoko lubonwa luyimfuneko kwesi siqinisekiso ngaphandle kokwaziswa kwangaphambili.

509 Central Drive Virginia Beach, VA 23454

Amaxwebhu / Izibonelelo

I-LIGHTRONICS TL3012 i-Memory Control Console [pdf] Incwadi yoMnini I-TL3012 ye-Memory Control Console, i-TL3012, i-Memory Control Console, i-Console yokulawula, i-Console

Iimbekiselo

• Incwadi yokusebenzisa