UNITRONICS V1210-T20BJ Li-Logic Controllers tse nang le Phanele ea HMI e kenyelitsoeng
Tlhaloso e Akaretsang
Li-OPLC tsa V1210 ke li-control tsa logic tse hlophisehang tse kenyelletsang phanele ea ts'ebetso e hahelletsoeng e nang le 12.1 ”Colour Touchscreen.
Lipuisano
- Likou tse 2 tse ikhethileng tsa RS232/RS485
- Kou ea mananeo a USB (Mini-B)
- Boema-kepe bo ikhethileng ba CANbus
- Mosebedisi a ka odara le ho kenya boema-kepe bo eketsehileng. Sena e ka ba Ethernet kapa serial.
- Lithibelo tsa Mosebetsi oa Puisano li kenyelletsa: SMS, GPRS, MODBUS serial / IP; Protocol FB e thusa PLC ho buisana le hoo e ka bang sesebelisoa leha e le sefe sa kantle, ka likhokahano tsa serial kapa Ethernet
Likhetho tsa I / O
V1210 e ts'ehetsa li-I/O tsa dijithale, tsa lebelo le holimo, tsa analog, boima le mocheso ka:
- Snap-in I/O Modules
Hokela ka morao ho molaoli ho fana ka tlhophiso ea onboard I/O
Li-Module tsa Katoloso ea I/O
Li-I/O tsa lehae kapa tse hole li ka eketsoa ka boema-kepe ba katoloso kapa CANbus.
Litaelo tsa ho kenya le lintlha tse ling li ka fumanoa leqepheng la lintlha tsa tekheniki tsa module.
Mokhoa oa Tlhahisoleseding Mokhoa ona o o nolofalletsa ho:
- Lekanya skrine ea ho ama
- View & Hlophisa boleng ba tšebetso, li-setting tsa boema-kepe ba COM, RTC le litlhophiso tsa phapang/ khanya
- Emisa, qala, 'me u tsosolose PLC
Ho kenya Mokgwa wa Tlhahisoleseding, tobetsa skrineng sa ho thetsa ebe o boloka lebitso la hao metsotsoana e mmalwa.
Mananeo Software, & Utilities
CD ea Unitronics Setup e na le software ea VisiLogic le lisebelisoa tse ling
- VisiLogic
Lokisa lisebelisoa tsa thepa habonolo 'me u ngole lisebelisoa tsa taolo ea HMI le Ladder; laeborari ea Function Block e nolofatsa mesebetsi e rarahaneng joalo ka PID. Ngola kopo ea hau, ebe u e khoasolla ho molaoli ka thapo ea lenaneo e kenyellelitsoeng ka har'a khiti. - Lisebelisoa
Tsena li kenyelletsa seva sa UniOPC, phihlello ea Remote bakeng sa mananeo a hole le tlhahlobo, le DataXport bakeng sa ho rengoa ha data ka nako.
Ho ithuta ho sebelisa le ho hlophisa molaoli, hammoho le ho sebelisa lisebelisoa tse kang Remote Access, sheba ho VisiLogic Help system.
E tlosehang Polokelo ea Memori
Karete ea Micro-SD: polokelo ea data, Lialamo, Mekhoa, Litafole tsa Boitsebiso; romela kantle ho Excel; backup Ladder, HMI & OS 'me u sebelise data ena ho "clone" PLCs.
Bakeng sa lintlha tse ling, sheba lihlooho tsa SD ho VisiLogic Help system.
Litafole tsa Lintlha : Litafole tsa data li u thusa ho theha li-parameter tsa risepe le ho theha lintlha tsa data.
Litokomane tse ling tsa sehlahisoa li ho Technical Library, e teng ho www.unitronicsplc.com.
Tšehetso ea tekheniki e fumaneha setšeng, le ho tloha support@unitronics.com.
Likahare tsa Standard Kit
- Vision controller Mounting : masakaneng (x8)
- 3 Pin sehokelo sa phepelo ea matla: Tiiso ea rabara
- 5 Pin sehokelo sa CANbus
- Mohanyetsi oa ho emisa marang-rang oa CANbus
- Betri (ha e ea kengoa)
Matšoao a Kotsi
Ha leha e le efe ea matšoao a latelang a hlaha, bala lintlha tse amanang le tsona ka hloko.
| Letšoao | Tlhaloso | Tlhaloso | |
 |
Kotsi | Kotsi e boletsoeng e baka tšenyo ea 'mele le thepa. | |
Caution |
Tlhokomediso
Tlhokomeliso |
Kotsi e boletsoeng e ka baka tšenyo ea 'mele le thepa.
E-ba hlokolosi. |
- Pele o sebelisa sehlahisoa sena, mosebelisi o tlameha ho bala le ho utloisisa tokomane ena.
- Tsohle exampli-les le litšoantšo li reretsoe ho thusa ho utloisisa, 'me ha li fane ka tiiso ea ts'ebetso. Unitronics ha e amohele boikarabello bakeng sa ts'ebeliso ea 'nete ea sehlahisoa sena ho latela li-examples.
- Ka kopo, lahla sehlahisoa sena ho latela maemo le melaoana ea lehae le ea naha.
- Ke basebeletsi ba nang le tsebo feela ba lokelang ho bula sesebelisoa sena kapa ho lokisa.
Ho hloleha ho latela ditataiso tse nepahetseng tsa polokeho ho ka baka kotsi e mpe kapa tshenyo ya thepa.
- Se ke oa leka ho sebelisa sesebelisoa sena se nang le liparamente tse fetang maemo a lumelletsoeng.
- Ho qoba ho senya sistimi, o seke oa hokela / o hakolla sesebelisoa ha motlakase o le teng.
Mehopolo ea Tikoloho
- Se ke oa kenya libakeng tse nang le: lerōle le feteletseng kapa le nang le mocheso o mongata, khase e senyang kapa e tukang, mongobo kapa pula, mocheso o feteletseng, ts'oaetso e tloaelehileng kapa ho sisinyeha ho feteletseng, ho latela maemo a fanoeng letlapeng la lintlha tsa theknoloji ea sehlahisoa.
- Ho kenya moea: 10mm sebaka se hlokahalang pakeng tsa mathōko a ka holimo/ka tlaase le mabota a kampetsoeng.
- U se ke ua kenya metsi kapa ua lumella metsi hore a lutlele holim'a yuniti.
- Se ke oa lumella litšila ho oela ka har'a yuniti nakong ea ho kenya.
- Kenya bohole bo boholo ho tloha ho high-voltaglithapo tsa e le lisebelisoa tsa motlakase.
UL Compliance
Karolo e latelang e amana le lihlahisoa tsa Unitronics tse thathamisitsoeng le UL.
- Mohlala: V1210-T20BJ ke UL e thathamisitsoeng bakeng sa Libaka tse Kotsi.
- Mohlala: V1210-T20BJ ke UL e thathamisitsoeng bakeng sa Sebaka se Tloaelehileng.
UL Sebaka se Tloaelehileng
E le hore u finyelle maemo a tloaelehileng a sebaka sa UL, beha sesebelisoa sena sebakeng se bataletseng sa mefuta ea 1 kapa ea 4 X.
Litekanyetso tsa UL, Balaoli ba Rerang ho Sebelisa Libakeng Tse Kotsi, Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D
Lintlha tsena tsa Tokollo li amana le lihlahisoa tsohle tsa Unitronics tse nang le matšoao a UL a sebelisoang ho tšoaea lihlahisoa tse lumelletsoeng ho sebelisoa libakeng tse kotsi, Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D.
Tlhokomeliso :
- Thepa ena e loketse ho sebelisoa ho Sehlopha sa I, Karolo ea 2, Lihlopha A, B, C le D, kapa libakeng tse se nang kotsi feela.
- Lithapo tsa ho kenya le tse tsoang li tlameha ho tsamaellana le mekhoa ea likhoele tsa Sehlopha sa I, Karolo ea 2 le ho latela bolaoli bo nang le matla a ho laola.
- TLHOKOMELO- Kotsi ea Ho phatloha-ho emisoa ha likarolo ho ka 'na ha sitisa ho tšoaneleha bakeng sa Sehlopha sa I, Karolo ea 2.
- TLHOKOMELO – KOTSI EA HO PHAHLOA – Se ke oa hokela kapa oa hakolla lisebelisoa ntle le haeba motlakase o tingoe kapa sebaka seo ho tsejoa hore ha se kotsi.
- TLHOKOMELO - Ho pepesetsoa lik'hemik'hale tse ling ho ka theola thepa ea tiiso ea thepa e sebelisoang ho Relays.
- Thepa ena e tlameha ho kengoa ho sebelisoa mekhoa ea likhoele joalo ka ha ho hlokahala bakeng sa Sehlopha sa I, Karolo ea 2 joalo ka NEC le/kapa CEC.
Phanele-Mounting
Bakeng sa li-controller tse ka hlophisoang le ka har'a phanele, molemong oa ho kopana le maemo a UL Haz Loc, beha sesebelisoa sena sebakeng se bataletseng sa mefuta ea 1 kapa mefuta ea 4X.
Puisano le Polokelo ea Mehopolo e Tlohang
Ha lihlahisoa li na le boema-kepe ba puisano ba USB, sekotjana sa karete ea SD, kapa ka bobeli, ha se sekotjana sa karete ea SD kapa boema-kepe ba USB ha lia rereloa ho hokela ruri, ha boema-kepe ba USB bo reretsoe ho etsa mananeo feela.
Ho ntsha/ Ho ntsha betri
Ha sehlahiswa se kentswe ka betri, o se ke wa ntsha kapa wa nkela betri sebaka ntle le haeba motlakase o timilwe, kapa sebaka seo ho tsejwa hore ha se kotsi. Ka kopo hlokomela hore ho kgothaletswa ho boloka dintlha tsohle tse bolokiloeng ho RAM, e le ho qoba ho lahleheloa ke data ha u fetola betri ha matla a tima. Lintlha tsa letsatsi le nako le tsona li tla hloka ho hlophisoa bocha kamora ts'ebetso.
Ho kenya Battery
E le hore u boloke data ha motlakase o tima, o tlameha ho kenya betri.
Betri e tlameletsoe sekoahelong sa betri se ka morao ho molaoli.
- Tlosa sekoaelo sa betri se bontšitsoeng leqepheng la 6. Polarity (+) e tšoailoe setšeng sa betri le betri.
- Kenya betri, ho etsa bonnete ba hore letšoao la polarity betiring ke:
- ho sheba hodimo
- e tsamaellanang le letshwao le hodima setshoaro
- Tlosa sekwahelo sa betri.
Ho phahamisa
Litekanyo
Hlokomela hore skrine ea LCD e ka ba le pixel e le 'ngoe e sa feleng e ka ba e ntšo kapa e tšoeu.
Ho phahamisa Panel
Pele o qala, hlokomela hore phanele e ntseng e eketseha e ke ke ea ba botenya bo fetang 5 mm.
- Etsa phanele e khaotsoeng ho ea ka litekanyo tsa setšoantšo ho ea ka ho le letona.
- Tsamaisa selaolo ho cutout, ho etsa bonnete ba hore tiiso ea rabara e teng.
- Sututsa li-brackets tse 8 ho li-slots tsa tsona mahlakoreng a molaoli joalo ka ha ho bonts'itsoe setšoantšong se ka ho le letona.
- Tiisa likurufu tsa borakete khahlano le phanele. Tšoara borakete ka mokhoa o sireletsehileng khahlano le yuniti ha u ntse u tiisa screw.
- Ha e kentsoe ka nepo, selaoli se lutse hantle ka har'a karolo e sehiloeng ea phanele joalo ka ha ho bonts'itsoe ka tlase.
Hlokomela: Bakeng sa mojule o thathamisitsoeng ka UL, e le hore u finyelle maemo a UL508, beha sesebediswa sebakeng se bataletseng sa mofuta oa 1 oa mofuta oa XNUMX.
Wiring
- U se ke ua tšoara lithapo tse phelang.
- Kenya sekhechana sa potoloho se kantle. Itebele khahlanong le short-circuiting ka terata e kantle.
- Sebelisa lisebelisoa tse nepahetseng tsa tšireletso ea potoloho.
- Lithako tse sa sebelisoeng ha lia lokela ho kopanngoa. Ho iphapanyetsa taelo ena ho ka senya sesebelisoa.
- Lekola lithapo tsohle habeli pele o bulela phepelo ea motlakase.
- Tlhokomeliso:
- Ho qoba ho senya terata, u se ke ua feta torque e kholo ea 0.5 N·m (5 kgf·cm).
- Se ke oa sebelisa thini, solder kapa ntho leha e le efe holim'a terata e hlobotseng e ka etsang hore khoele ea terata e khaohe.
- Kenya bohole bo boholo ho tloha ho high-voltaglithapo tsa e le lisebelisoa tsa motlakase.
Mokhoa oa ho Wiring
Sebelisa li-terminals tsa crimp bakeng sa wiring; sebelisa terata ea 26-12 AWG (0.13 mm 2 -3.31 mm2)
- Hlobola terata ho bolelele ba 7±0.5 mm (0.250-0.300 inches).
- Hlakola theminale sebakeng sa yona se sephara ka ho fetisisa pele o kenya terata.
- Kenya terata ka botlalo ho theminale ho netefatsa hore ho na le khokahanyo e nepahetseng.
- Tiisa ho lekana hore terata e se ke ea hula ka bolokolohi.
Phepelo ea motlakase
Taolo ea V1210-T20BJ e hloka motlakase oa kantle oa 12 kapa 24VDC. Kenyeletso e dumelletsweng voltagmefuta ea e: 10.2-28.8VDC, e nang le ripple e ka tlase ho 10%.
- Motlakase o tlameha ho kenyelletsa ho pata habeli. Lintho tse hlahisoang li tlameha ho behoa joalo ka SELV/PELV/Class 2/Limited Power.
- Se ke oa hokela lets'oao la 'Neutral kapa' Line' la 110/220VAC ho phini ea 0V ea sesebelisoa.
- Kenya sekhechana sa potoloho se kantle. Itebele khahlanong le ho potoloha ho khutšoanyane ka har'a terata e ka ntle.
- Lekola lithapo tsohle habeli pele o bulela phepelo ea motlakase.
- Ketsahalong ea voltage ho feto-fetoha kapa ho se lumellane le voltage lintlha tsa phepelo ea motlakase, hokela sesebelisoa ho phepelo ea motlakase e laoloang.
Ho hlahisa OPLC
Ho eketsa ts'ebetso ea sistimi, qoba tšitiso ea motlakase ka:
- Ho kenya molaoli holim'a phanele ea tšepe.
- Hokela terminal ea lefatše e sebetsang ea OPLC, le mehala e tloaelehileng le ea motheo ea li-I/O, ka kotloloho mobung oa sistimi ea hau.
- Bakeng sa terata ea fatše, sebelisa terata e khutšoanyane le e teteaneng ka ho fetisisa.
Li-Ports tsa puisano
Letoto lena le na le boema-kepe ba USB, boema-kepe ba 2 RS232/RS485 le boema-kepe ba CANbus. Boema-kepe bo eketsehileng bo ka laeloa ka thoko le ho kenngoa. Kou ena e kanna ea ba Ethernet, kapa serial (COM 3). Bakeng sa tlhaiso-leseling e ntlafalitsoeng ka ho fetesisa mabapi le likou le ho kengoa ha tsona, ka kopo sheba Laeborari ea Tekheniki ho www.unitronics.com.
- Tima motlakase pele o etsa likhokahano tsa likhokahano.
- Tlhokomeliso: Kamehla sebelisa li-adapter tse loketseng tsa koung.
Boema-kepe ba USB bo ka sebelisoa bakeng sa ho etsa mananeo, ho jarolla OS, le phihlello ea komporo. Hlokomela hore ts'ebetso ea COM port 1 e emisoa ha boema-kepe bona bo hokahane le PC. Likou tsa serial ke mofuta oa RJ-11 'me li ka hlophisoa ho RS232 kapa RS485 ka li-switches tsa DIP, ho latela tafole e bontšitsoeng ka tlase. Sebelisa RS232 ho khoasolla mananeo ho tsoa komporong, le ho buisana le lisebelisoa tsa serial le lits'ebetso, joalo ka SCADA. Sebelisa RS485 ho theha marang-rang a marotholi a mangata a nang le lisebelisoa tse fihlang ho 32.
Pinouts
- Li-pinouts tse ka tlase li bonts'a matšoao a boema-kepe ba PLC.
- Ho hokela PC boema-kepe bo hlophisitsoeng ho RS485, tlosa sehokelo sa RS485, 'me u hokele PC ho PLC ka thapo ea lenaneo. Hlokomela hore sena se ka khoneha feela haeba matšoao a ho laola phallo a sa sebelisoe (e leng boemo bo tloaelehileng).
RS232 Pin # Desckhutsufatsa 1* Letšoao la DTR 2 Tlhaloso ea 0V 3 Letšoao la TXD 4 Letšoao la RXD 5 Tlhaloso ea 0V 6* Letšoao la DSR RS485** Controller Port Pin # Desckhutsufatsa 
1 Letšoao (+) 2 (Lets'oao la RS232) 3 (Lets'oao la RS232) 4 (Lets'oao la RS232) 5 (Lets'oao la RS232) 6 Letshwao la B (-) - Lithapo tse tloaelehileng tsa lenaneo ha li fane ka lintlha tsa khokahanyo bakeng sa pin 1 le 6.
- Ha kou e ikamahanya le RS485, Pin 1 (DTR) e sebelisetsoa lets'oao la A, 'me lets'oao la Pin 6 (DSR) le sebelisetsoa lets'oao la B.
RS232 ho RS485: Ho Fetola Litlhophiso tsa Phetoho ea DIP
Likou li behiloe ho RS232 ka mokhoa oa feme. Ho fetola litlhophiso, qala ka ho tlosa Snap-in I/O Module, haeba e kentsoe, ebe u beha li-switches ho latela tafole e latelang.
RS232/RS485: DIP Switch Settings
Litlhophiso tse ka tlase ke tsa boema-kepe bo bong le bo bong ba COM.
| Smoloi Settings | ||||||
| 1 | 2 | 3 | 4 | 5 | 6 | |
| RS232* | ON | ON | ON | TLOA | ON | TLOA |
| RS485 | TLOA | TLOA | TLOA | ON | TLOA | ON |
| RS485 ka ho felisoa ** | ON | ON | TLOA | ON | TLOA | ON |
Tlhophiso ea kamehla ea feme
E etsa hore yuniti e sebetse joalo ka yuniti ea pheletso ho netweke ea RS485
Ho kenya Snap-in I/O Module
- Pele o kenya Snap-In Module, etsa bonnete ba hore Sekoaelo sa Mojule oa Puisano se koetsoe.
- Tlosa sekoahelo sa I/O se bontšitsoeng leqepheng la 6.
- Tsamaisa litataiso tse selikalikoe ho Snap-in I/O Module ka li-slots ho molaoli joalo ka ha ho bonts'itsoe ka tlase.
- Sebelisa esita le khatello likhutlong tsohle tse 4 ho fihlela u utloa 'tobetsa' e ikhethang. Hona joale module e kentsoe. Etsa bonnete ba hore mahlakore le likhutlo tsohle li hlophisitsoe hantle.
Ho tlosa Snap-in I/O Module
- Fumana likonopo tse 'nè mahlakoreng a molaoli, tse peli ka lehlakoreng le leng.
- Tobetsa likonopo ebe u li tšoara fatše ho bula mochine oa ho notlela.
- Ka bonolo sisinya module ho tloha ka lehlakoreng le leng ho ea ho le leng, ho nolofatsa module ho tloha ho molaoli.
CANbus
Balaoli bana ba kenyelletsa boema-kepe ba CANbus. Sebelisa sena ho theha marang-rang a taolo a arolelanoang ka ho sebelisa e 'ngoe ea liprothokholo tse latelang tsa CAN:
- CANopen: balaoli ba 127 kapa lisebelisoa tsa kantle
- CANLayer 2
- UniCAN e nang le thepa ea Unitronics: balaoli ba 60, (li-byte tsa data tse 512 ka skena)
Boema-kepe ba CANbus bo qheletsoe ka thoko.
CANbus Wiring
- Sebelisa thapo e sothehileng. Ho khothaletsoa thapo e sothehileng ea DeviceNet® e teteaneng e sirelelitsoeng.
- Li-terminator tsa marang-rang: Tsena li fanoa ka molaoli. Beha li-terminators pheletsong e 'ngoe le e 'ngoe ea marang-rang a CANbus.
- Ho hanyetsa ho tlameha ho behoa ho 1%, 121Ω, 1/4W.
- Hokela lets'oao la fatše lefatšeng sebakeng se le seng feela, haufi le phepelo ea motlakase.
- Matla a marang-rang ha a hloke ho ba qetellong ea marang-rang.
Sehokelo sa CANbus
Litlhaloso tsa Tekheniki
Phepelo ea motlakase
- Keletso voltage: 12 kapa 24VDC
- Sebaka se lumelletsoeng: 10.2-28.8VDC
- Max. tšebeliso ea hajoale: 1A@12V 0.5A@24V
Betri
- Backup : Lilemo tse 7 tse tloaelehileng ho 25 ° C, bekapo ea betri bakeng sa RTC le data ea sistimi, ho kenyelletsa le data e fapaneng.
- E ka nkeloa sebaka: E, ntle le ho bula molaoli.
Skrine ea Pontšo ea Graphic
Sheba Ntlha ea 1
- Mofuta oa LCD : TFT
- Lebone la morao-rao la khanya : LED e tšoeu
- Bontša qeto, lipikselse :00×600 (SVGA)
- Viewsebaka sa ho jella: 12.1″
- Mebala : 65,536 (16-bit)
- Skrine se thetsoang: Ho hanyetsa, analogue
- ‘Letšoao la Touch: Ka buzzer
- Khanya ea skrine : Ka software (Boleng ba polokelo ho SI 9).
- Letlapa la dikonopo: E hlahisa keyboard ea sebele ha sesebelisoa se hloka ho kenngoa ha data.
Lintlha: 1 Hlokomela hore skrine ea LCD e ka ba le pixel e le 'ngoe e sa feleng e ka ba e ntšo kapa e tšoeu.
Lenaneo
Mehopolo e Tlohang
Karete ea Micro-SD E lumellana le likarete tsa SD tse potlakileng; boloka boitsebiso, Alarms, Trends, Data Tables, bekapo Ladder, HMI, le OS. Sheba Ntlha ea 2
Lintlha: 2. Mosebelisi o tlameha ho fomata ka lisebelisoa tsa Unitronics SD.
Puisano
Lintlha:
- 3. Tekanyetso ea boema-kepe bo bong le bo bong e behiloe ho RS232/RS485 ho latela litlhophiso tsa switjha tsa DIP. Sheba Tataiso ea Tlhophiso.
- 4. Boema-kepe ba USB bo ka sebelisoa ho etsa mananeo, ho jarolla OS, le phihlello ea komporo. Hlokomela hore ts'ebetso ea boema-kepe ba COM e emisoa ha boema-kepe bona bo hokahane le PC.
- 5. E ts'ehetsa motlakase oa 12 le 24VDC CANbus ka bobeli, (± 4%), 40mA boholo ka yuniti. Hlokomela hore haeba 12 VDC e sebelisoa, bolelele bo boholo ba cable ke 150 metres.
Ke / Os
Palo ea li-I/O le mefuta e fapana ho ea ka mojule. E ts'ehetsa ho fihla ho 1024 dijithale, lebelo le phahameng, le li-I/O tsa analoge.
Snap-in I/O modules : Li-plug ho boema-kepe bo ka morao ho theha PLC e ikemetseng e nang le ho fihla ho 62 I/Os.
Li-module tsa katoloso : Adapter ea lehae (PN EX-A1), ka I/O Expansion Port. Kopanya ho fihla ho 8 I/O Katoloso ea li-Module tse kenyelletsang ho fihla ho 128 tse eketsehileng tsa I/O.
Adapter e hole (PN EX-RC1), ka boema-kepe ba CANbus. Hokela li-adapter tse ka bang 60; hokela ho fihla ho li-module tse 8 tsa katoloso ea I/O ho adaptara ka 'ngoe.
Exp. port isolation : SeGalvanic
Litekanyo
- SizeL: 313.1X244.6X59.1mm “12.32 ) X “9.62 X2.32”). Sheba Ntlha ea 6
- Boima ba 'mele Boima: 1.7kg (60 oz)
Lintlha: 6. Bakeng sa boholo bo nepahetseng, sheba Tataiso ea ho Instola ea sehlahisoa.
Ho phahamisa
- Ho kenya liphanele: Ka masakana
Tikoloho
- Ka hare ho khabinete: IP20 / NEMA1 (nyeoe)
- Panele e kentsoeng: IP65/66/NEMA4X (phanele e ka pele)
- Mocheso oa ho sebetsa : 0 ho isa ho 50ºC (32 ho isa ho 122ºF)
- Mocheso oa polokelo :-20 ho 60ºC (-4 ho 140ºF)
- Mongobo o Batlang: (RH) 5% ho isa ho 95% (ha e fokotsehe)
Lintlha tse tokomaneng ena li bontša lihlahisoa ka letsatsi la khatiso. Unitronics e na le tokelo, ho ipapisitsoe le melao eohle e sebetsang, ka nako efe kapa efe, ka nako ea eona feela
boikhethelo, ntle le tsebiso, ho khaotsa kapa ho fetola likarolo, meralo, thepa le lintlha tse ling tsa lihlahisoa tsa eona, le hore e be ka ho sa feleng kapa
ho tlosa ka nakoana ho tsoa 'marakeng. Lintlha tsohle tse tokomaneng ena li fanoe "joalokaha li le" ntle le tiisetso ea mofuta ofe kapa ofe, e ka hlahisoang kapa e ka hlalosoang, ho kenyeletsoa empa e sa felle feela ho litiisetso tsa thekiso, ho sebetsa molemong o itseng, kapa ho se tlole molao. Unitronics ha e nke boikarabello bakeng sa liphoso kapa lintho tse sieo boitsebisong bo hlahisitsoeng tokomaneng ena. Ha ho ketsahalo e ke keng ea ikarabella bakeng sa litšenyehelo tse khethehileng, tsa tšohanyetso, tse sa tobang kapa tsa litlamorao tsa mofuta ofe kapa ofe, kapa tšenyo efe kapa efe e hlahang kapa mabapi le ts'ebeliso kapa ts'ebetso ea tlhahisoleseling ena. Mabitso a khoebo, matšoao a khoebo, li-logo le matšoao a litšebeletso a hlahisitsoeng tokomaneng ena, ho kenyeletsoa le moralo oa tsona, ke thepa ea Unitronics (1989) (R”G) Ltd. kapa batho ba bang ba boraro, 'me ha ua lumelloa ho li sebelisa ntle le hore u ngole pele. tumello ea Unitronics kapa motho e mong ea ka bang mong'a tsona.
Litokomane / Lisebelisoa
 |
UNITRONICS V1210-T20BJ Li-Logic Controllers tse nang le Phanele ea HMI e kenyelitsoeng [pdf] Bukana ea Mosebelisi V1210-T20BJ Logic Controllers le Embedded HMI Panel, V1210-T20BJ, Logic Controllers le Embedded HMI Panel |
