I-UNITRONICS V1210-T20BJ Abalawuli beNgqiqo kunye nePhaneli yeHMI eEmbedded

Inkcazo ngokubanzi

Ii-OPLC ze-V1210 zizilawuli ezicwangcisiweyo ezibandakanya ipaneli yokusebenza eyakhelweyo equlethe i-12.1” yesikrini soMbala.

Unxibelelwano

• 2 izibuko RS232/RS485 ekwanti
• Izibuko lenkqubo ye-USB (eMncinci-B)
• Izibuko le-CANbus elikwanti
• Umsebenzisi unoku-odola kwaye afake i-port eyongezelelweyo. Oku kunokuba yi-Ethernet okanye i-serial.
• Iibhloko zoMsebenzi woNxibelelwano ziquka: I-SMS, i-GPRS, i-MODBUS serial / IP; Iprotokholi ye-FB yenza ukuba i-PLC inxibelelane phantse naso nasiphi na isixhobo sangaphandle, nge-serial okanye ngonxibelelwano lwe-Ethernet

I/O Iinketho

I-V1210 ixhasa idijithali, isantya esiphezulu, i-analog, ubunzima kunye nomlinganiselo wobushushu ii-I/Os nge:

• Iimodyuli ze-Snap-in I/O
  Xhaka ngasemva kwisilawuli ukuze ubonelele ngoqwalaselo lwe-I/O olukwibhodi

Iimodyuli zoKwandiswa kwe-I/O
Ii-I/Os zasekuhlaleni okanye ezikude zinokudityaniswa ngolwandiso lwezibuko okanye i-CANbus.
Imiyalelo yokufakela kunye nenye idatha inokufumaneka kwiphepha lengcaciso yobugcisa bemodyuli.

Imo yoLwazi Le mowudi yenza ukuba ukwazi:

• Lungiselela isikrini esichukumisayo
• View & Hlela amaxabiso omsebenzi, useto lwe-COM port, i-RTC kunye nescreen umahluko/ukukhanya kwezicwangciso
• Misa, qalisa, kwaye usete kwakhona i-PLC
  Ukufaka iMowudi yoLwazi, cofa isikrini esichukumisayo kwaye ugcine umfowunelwa imizuzwana emininzi.

Inkqubo yeSoftware, & nezinto eziluncedo
I-Unitronics Setup CD iqulethe isoftware yeVisiLogic kunye nezinye izinto eziluncedo

• VisiLogic
  Ukuqwalasela i-hardware ngokulula kwaye ubhale zombini i-HMI kunye ne-Ladder control applications; ithala leencwadi leBlock yeMsebenzi lenza lula imisebenzi entsonkothileyo efana ne-PID. Bhala isicelo sakho, kwaye emva koko uyikhuphele kumlawuli ngentambo yokucwangcisa ebandakanyiweyo kwikhithi.
• Izinto eziluncedo
  Ezi ziquka iseva ye-UniOPC, i-Remote Access yeprogram ekude kunye ne-diagnostics, kunye ne-DataXport yokungena kwedatha yokugijima.

Ukufunda indlela yokusebenzisa kunye neprogram yomlawuli, kunye nokusebenzisa izinto eziluncedo ezifana ne-Remote Access, bhekisa kwi-VisiLogic Help system.

Iyasuswa Ukugcinwa kweMemori
Ikhadi le-Micro-SD: ii-datalogs zokugcina, ii-Alarms, iiTrendi, iiTheyibhuli zeDatha; thumela ngaphandle kwi-Excel; i-Ladder yokugcina, i-HMI kunye ne-OS kwaye usebenzise le datha 'ukudibanisa' ii-PLCs.
Ukufumana idatha engaphezulu, jonga kwizihloko ze-SD kwi-VisiLogic Help system.

Iitheyibhile zeDatha  : Iitheyibhile zedatha zikwenza ukwazi ukuseta iiparamitha zeresiphi kwaye wenze iilog zedatha.
Amaxwebhu emveliso awongezelelweyo akwiThala leencwadi lobuGcisa, elibekwe kwa www.unitronicsplc.com.
Inkxaso yobugcisa iyafumaneka kwisiza, kwaye ukusuka support@unitronics.com.

Imixholo yeKhithi esemgangathweni

• Ukunyuswa komlawuli wombono :  izibiyeli (x8)
• Izikhonkwane ezi-3 zobonelelo lwamandla: Itywina lerabha
• 5 pin CANbus isinxibelelanisi
• CANbus network ukupheliswa resistor
• Ibhetri (ayifakwanga)

Iimpawu ezinobungozi

Xa kukho naziphi na iisimboli zilandelayo zivelayo, funda ulwazi olunxulumeneyo ngononophelo.

Uphawu	Intsingiselo		Inkcazo
	Ingozi		Ingozi echongiweyo ibangela umonakalo emzimbeni kunye nepropathi.
Caution	Isilumkiso Isilumkiso		Ingozi echongiweyo inokubangela umonakalo emzimbeni kunye nepropathi. Lumka.

• Ngaphambi kokusebenzisa le mveliso, umsebenzisi kufuneka afunde kwaye aqonde olu xwebhu.
• Zonke exampi-les kunye nemizobo yenzelwe ukunceda ukuqonda, kwaye ayiqinisekisi ukusebenza. I-Unitronics ayilwamkeli uxanduva lokusetyenziswa kokwenene kwale mveliso ngokusekelwe kwezi examples.
• Nceda ulahle le mveliso ngokwemigangatho nemimiselo yasekhaya neyesizwe.
• Kuphela ngabasebenzi benkonzo abaqeqeshiweyo ekufuneka basivule esi sixhobo okanye basilungise.

Ukungaphumeleli ukuthobela izikhokelo zokhuseleko ezifanelekileyo kunokubangela ukulimala kakhulu okanye umonakalo wepropati.

• Musa ukuzama ukusebenzisa esi sixhobo ngeeparamitha ezidlula imigangatho evumelekileyo.
•  Ukunqanda ukonakalisa isixokelelwano, musa ukuqhagamshelwa/ucime uqhagamshelwano xa umbane uvuliwe.

Ukuqwalaselwa kokusingqongileyo

• Musa ukufaka kwiindawo ezine: uthuli olugqithisileyo okanye oluqhubekileyo, igesi edlayo okanye enokutsha, ukufuma okanye imvula, ubushushu obugqithisileyo, ukothuka kwempembelelo rhoqo okanye ukungcangcazela okugqithisileyo, ngokuhambelana nemigangatho enikwe kwiphepha lenkcazo yobugcisa bemveliso.
• Ukungena komoya: 10mm isithuba esifunekayo phakathi komphezulu/osezantsi imiphetho kunye neendonga ezivalekileyo.
• Musa ukubeka emanzini okanye ukuvumela amanzi avuze kwiyunithi.
• Musa ukuvumela i-debris iwele ngaphakathi kwiyunithi ngexesha lofakelo.
• Faka kumgama ophezulu ukusuka kwivolthi ephezulutagiintambo kunye nezixhobo zombane.

Ukuthotyelwa kwe-UL
Eli candelo lilandelayo lifanelekile kwiimveliso ze-Unitronics ezidweliswe kunye ne-UL.

• Imodeli: I-V1210-T20BJ i-UL idweliswe kwiiNdawo ezinobungozi.
• Imodeli: I-V1210-T20BJ i-UL idweliswe kwiNdawo eqhelekileyo.

UL Indawo eqhelekileyo
Ukuze kuhlangatyezwane nemigangatho yendawo yesiqhelo ye-UL, indawo yolawulo nyusa esi sixhobo kumphezulu osicaba woHlobo 1 okanye 4 X oluvalekileyo.

Imilinganiselo ye-UL, abalawuli abaCwangcisiweyo abaSebenzisa kwiiNdawo ezinobungozi, iKlasi I, iCandelo 2, Amaqela A, B, C kunye no-D
La maNqaku oKhupho anxulumene nazo zonke iimveliso ze-Unitronics ezineempawu ze-UL ezisetyenziselwa ukuphawula iimveliso ezivunyiweyo ukuba zisetyenziswe kwiindawo ezinobungozi, iKlasi yoku-I, iCandelo lesi-2, iQela A, B, C kunye no-D.

Isilumkiso :

• Esi sixhobo sifanelekile ukusetyenziswa kwiKlasi yoku-I, iCandelo lesi-2, amaQela A, B, C kunye no-D, okanye iindawo ezingenabungozi kuphela.
• I-input kunye ne-output wiring kufuneka ihambelane neKlasi I, iCandelo le-2 iindlela zocingo kunye nokuhambelana negunya elinegunya.
• ISILUMKISO-Ingozi yoDubulo-ukutshintshwa kwamalungu kunokuphazamisa ukufaneleka kwiKlasi yoku-I, iCandelo lesi-2.
• ISILUMKISO – INGOZI YOKUQHUBEKA – Musa ukudibanisa okanye ukuqhawula izixhobo ngaphandle kokuba umbane ucinyiwe okanye indawo leyo yaziwa ngokuba ayinabungozi.
• ISILUMKISO – Ukuvezwa kwezinye iikhemikhali kungonakalisa iipropathi zokutywina zezinto ezisetyenziswa kwiiRelays.
• Esi sixhobo kufuneka sifakwe kusetyenziswa iindlela zocingo njengoko zifuneka kwiKlasi I, iCandelo 2 ngokwe-NEC kunye / okanye i-CEC.

Iphaneli-yokunyuswa
Kubalawuli abacwangciswayo abanokunyuswa nakwindawo yolawulo, ukuze bahlangabezane nomgangatho we-UL Haz Loc, indawo yolawulo-nyusa esi sixhobo kumphezulu osicaba woHlobo loku-1 okanye izivalo zoHlobo lwe-4X.

Unxibelelwano kunye nokugcinwa kweMemori eSukayo
Xa iimveliso ziquka nokuba yi-USB yonxibelelwano port, SD card slot, okanye zombini, hayi i-SD card slot okanye i-USB port ayijoliswanga ukuba iqhagamshelwe ngokusisigxina, ngelixa i-USB port yenzelwe inkqubo kuphela.

Ukususa / Ukutshintsha ibhetri
Xa imveliso ifakelwe ibhetri, musa ukuyisusa okanye uyibuyisele endaweni yebhetri ngaphandle kokuba umbane ucinyiwe, okanye indawo leyo yaziwa ngokuba ayinabungozi. Nceda uqaphele ukuba kucetyiswa ukuba ugcine yonke idatha egcinwe kwi-RAM, ukuze ugweme ukulahlekelwa idatha xa utshintsha ibhetri ngelixa umbane ucinyiwe. Ulwazi lomhla kunye nexesha luya kufuneka lusetwe ngokutsha emva kwenkqubo.

Ukufaka ibhetri

Ukuze ugcine idatha kwimeko yokucima kombane, kufuneka ufake ibhetri.
Ibhetri inikezelwa kwikhava yebhetri engasemva kwesilawuli.

1. Susa ikhava yebhetri eboniswe kwiphepha lesi-6. I-polarity (+) iphawulwe kwisibambi sebhetri nakwibhetri.
2. Faka ibhetri, uqinisekise ukuba isimboli ye-polarity kwibhetri yile:
   1. ejonge phezulu
   2. ihambelana nesimboli kwisibambi
3. Buyisela isigqubuthelo sebhetri.

Ukunyuka

Imilinganiselo

Qaphela ukuba isikrini se-LCD sinokuba nepixel enye ehlala imnyama okanye imhlophe ngokusisigxina.

Ukunyuka kwePaneli
Ngaphambi kokuba uqale, qaphela ukuba ipaneli yokuxhoma ayikwazi ukuba ngaphezu kwe-5 mm ubukhulu.

1. Yenza ipaneli yokusika ngokwemilinganiselo kumfanekiso osekunene.
2. Slayida isilawuli kwi-cutout, uqinisekise ukuba isitywina serabha sisendaweni.
3. Tyhila izibiyeli ezi-8 ezixhomayo kwiindawo zokubeka kumacala esilawuli njengoko kubonisiwe kumfanekiso osekunene.
4. Qinisa izikrufu zesibiyeli kwindawo yolawulo. Bamba isibiyeli ngokukhuselekileyo ngokuchasene neyunithi ngelixa uqinisa isikrufu.
5. Xa inyuswe ngokufanelekileyo, isilawuli sime ngokulinganayo kwiqela lenjongo elisikiweyo njengoko kubonisiwe ngezantsi.

Phawula: Kwimodyuli edwelisiweyo ye-UL, ukuze kuhlangatyezwane nomgangatho we-UL508, indawo yolawulo-nyusa esi sixhobo kumphezulu osicaba woHlobo loku-1 olubiyelweyo.

Iintambo 

• Musa ukubamba iingcingo eziphilayo.
• Faka i-breaker circuit yangaphandle. Khuphela ngokuchasene ne-short-circuiting kwiingcingo zangaphandle.
• Sebenzisa izixhobo ezifanelekileyo zokukhusela isiphaluka.
• Izikhonkwane ezingasetyenziswanga akufanele zidityaniswe. Ukungawuhoyi lo myalelo kungonakalisa isixhobo.
• Jonga kwakhona zonke iintambo phambi kokuba uvule unikezelo lombane.
• Isilumkiso: 
  • Ukuze ugweme ukulimaza ucingo, ungagqithisi i-torque ephezulu ye-0.5 N · m (5 kgf·cm).
  • Musa ukusebenzisa itoti, i-solder, okanye nayiphi na into kucingo olukhutshiweyo olunokubangela ukuba umsonto wocingo uqhawuke.
  • Faka kumgama ophezulu ukusuka kwivolthi ephezulutagiintambo kunye nezixhobo zombane.

Inkqubo yocingo
Sebenzisa iitheminali zecrimp kwi-wiring; sebenzisa i-26-12 AWG ucingo (0.13 mm 2 -3.31 mm2)

1. Hlubula ucingo ukuya kubude be-7±0.5 mm (0.250-0.300 intshi).
2. Khulula i-terminal ukuya kwindawo yayo ebanzi phambi kokufaka ucingo.
3. Faka ucingo ngokupheleleyo kwi-terminal ukuqinisekisa uqhagamshelo olufanelekileyo.
4. Qinisa ngokwaneleyo ukugcina ucingo lungatsali lukhululekile.

Ukunikezwa Amandla
Umlawuli we-V1210-T20BJ ufuna nokuba i-12 yangaphandle okanye i-24VDC unikezelo lwamandla. Igalelo elivumelekileyo voltaguluhlu lwe-e: 10.2-28.8VDC, kunye ne-ripple engaphantsi kwe-10%.

• Unikezelo lwamandla kufuneka lubandakanye ukugquma kabini. Iziphumo kufuneka zilinganiswe njenge-SELV/PELV/Class 2/Limited Power.
• Sukuqhagamshela nokuba yi-'Neutral okanye 'Layini' isignali ye-110/220VAC kwi-pin ye-0V yesixhobo.
• Faka i-breaker circuit yangaphandle. Gada ngokuchasene nokujikeleza okufutshane kwiingcingo zangaphandle.
• Jonga kwakhona zonke iintambo phambi kokuba uvule unikezelo lombane.
• Kwimeko yomqulutage ukuguquguquka okanye ukungahambelani nomqulutage iinkcukacha zonikezelo lwamandla, qhagamshela isixhobo kunikezelo lwamandla olulawulwayo.

Ukuvula i-OPLC
Ukwandisa ukusebenza kwenkqubo, thintela ukuphazamiseka kombane ngoku:

• Ukuxhoma umlawuli kwipaneli yentsimbi.
• Qhagamshela i-terminal yomhlaba esebenzayo ye-OPLC, kunye nemigca eqhelekileyo kunye neyomhlaba ye-I/Os, ngqo kumhlaba womhlaba wenkqubo yakho.
• Kwiingcingo zomhlaba, sebenzisa olona cingo lufutshane nolungqindilili olunokwenzeka.

Amazibuko oNxibelelwano
Olu ngcelele lubandakanya i-port ye-USB, i-2 RS232 / RS485 izibuko ze-serial kunye ne-CANbus port. Izibuko elongezelelweyo linoku-odolwa ngokwahlukileyo kwaye lifakwe. Eli zibuko linokuba yi-Ethernet, okanye i-serial (COM 3). Ngolona lwazi luhlaziyiweyo malunga namazibuko kunye nofakelo lwawo, nceda ubhekisele kwiThala leeNcwadi loBugcisa apha www.unitronics.com.

• Cima umbane phambi kokuba wenze uqhagamshelo lonxibelelwano.
• Isilumkiso: Soloko usebenzisa iiadaptha zezibuko ezifanelekileyo.

Izibuko le-USB lisenokusetyenziselwa inkqubo, ukukhuphela i-OS, kunye nofikelelo lwePC. Qaphela ukuba i-COM port 1 umsebenzi uyanqunyanyiswa xa elizibuko lidityaniswe ngokwasemzimbeni kwiPC. Izibuko ze-serial luhlobo lwe-RJ-11 kwaye zinokusetwa ukuba zibe yi-RS232 okanye i-RS485 ngokutshintsha kwe-DIP, ngokuhambelana netheyibhile eboniswe ngezantsi. Sebenzisa i-RS232 ukukhuphela iinkqubo kwi-PC, kunye nokunxibelelana nezixhobo ze-serial kunye nezicelo, ezifana ne-SCADA. Sebenzisa i-RS485 ukwenza uthungelwano lwe-multi-drop oluqulethe izixhobo eziya kuthi ga kwi-32.

Iipinouts

• Iipinouts ezingezantsi zibonisa iimpawu zezibuko ze-PLC.
• Ukuqhagamshela i-PC kwi-port ebekwe kwi-RS485, susa i-RS485 ikhonkco, kwaye uqhagamshele i-PC kwi-PLC ngentambo yokucwangcisa. Qaphela ukuba oku kunokwenzeka kuphela xa iimpawu zokulawula ukuhamba zingasetyenziswanga (nto leyo yimeko eqhelekileyo).
  

  RS232
  Pin #	Descukurhola
  1*	Umqondiso we-DTR
  2	0V isalathiso
  3	Uphawu lweTXD
  4	Umqondiso we-RXD
  5	0V isalathiso
  6*	Umqondiso weDSR

  RS485**		CIzibuko lomlawuli
  Pin #	Descukurhola
  1	Umqondiso (+)
  2	(uphawu lweRS232)
  3	(uphawu lweRS232)
  4	(uphawu lweRS232)
  5	(uphawu lweRS232)
  6	Umqondiso B (-)

• Iintambo zeprogram eziqhelekileyo aziboneleli ngamanqaku okudibanisa kwiikhonkwane ze-1 kunye ne-6.
• Xa izibuko lilungelelaniswe ne-RS485, iPin 1 (DTR) isetyenziselwa umqondiso A, kunye nePin 6 (DSR) isignali isetyenziselwa umqondiso B.

I-RS232 ukuya kwi-RS485: Ukutshintsha Izicwangciso zoTshintsho lwe-DIP
Amazibuko amiselwe kwi-RS232 ngokwendalo yasefektri. Ukutshintsha useto, qala ngokususa i-Snap-in I/O Modyuli, ukuba ifakelwe, uze usete izitshixo ngokwale theyibhile ilandelayo.

I-RS232/RS485: Izicwangciso zoTshintsho lwe-DIP
Izicwangciso ezingezantsi zezobuchwephesha beCOM nganye.

	Sigqwirha Izicwangciso
	1	2	3	4	5	6
RS232*	ON	ON	ON	CIMA	ON	CIMA
RS485	CIMA	CIMA	CIMA	ON	CIMA	ON
RS485 ngokupheliswa **	ON	ON	CIMA	ON	CIMA	ON

Useto lwasefektri oluhlala lukhona
Ibangela ukuba iyunithi isebenze njengeyunithi yokugqibela kuthungelwano lweRS485

Ukufakela i-Snap-in I/O Modyuli

• Phambi kokufaka i-Snap-In Modyuli, qinisekisa ukuba i-Cover yeModyuli yoNxibelelwano ivaliwe.
  1.  Susa ikhonkco ye-I/O eboniswe kwiPhepha lesi-6.
  2. Layisha isikhokelo sesetyhula kwi-Snap-in I/O Module eneendawo zokubeka kwisilawuli njengoko kubonisiwe ngezantsi.
  3. Faka uxinzelelo olulinganayo kuzo zonke iikona ezi-4 de uve 'cofa' eyahlukileyo. Imodyuli ifakiwe ngoku. Khangela ukuba onke amacala kunye neekona zilungelelaniswe ngokuchanekileyo.

Ukususa i-Snap-in I/O Modyuli

1. Khangela amaqhosha amane kumacala omlawuli, amabini macala omabini.
2. Cinezela amaqhosha kwaye uwabambe phantsi ukuze uvule indlela yokutshixa.
3. Gcoba ngobunono imodyuli ukusuka kwelinye icala ukuya kwelinye, ulula imodyuli ukusuka kumlawuli.

 

Ibhasi ye-CAN
Aba balawuli baquka izibuko le-CANbus. Sebenzisa oku ukwenza uthungelwano lolawulo olunatyisiweyo usebenzisa enye yezi protocols ze-CAN zilandelayo:

• CANopen: 127 abalawuli okanye izixhobo zangaphandle
• I-CANLayer 2
• Ubunini be-UniCAN ye-UniCAN: abalawuli abangama-60, (i-512 data bytes kwiskeni ngasinye)

Izibuko le-CANbus libekwe lodwa ngokwahlukileyo.

I-CANbus Wiring

• Sebenzisa intambo ephothiweyo. I-DeviceNet® etyebileyo ekhuselwe intambo ejijekileyo iyacetyiswa.
• Izithinteli zothungelwano: Ezi zibonelelwa nomlawuli. Beka izithinteli kwisiphelo ngasinye sothungelwano lwe-CANbus.
• Ukuchasa kufuneka kumiselwe kwi-1%, 121Ω, 1/4W.
• Qhagamshela umqondiso wasemhlabeni kwindawo enye kuphela, kufutshane nombane.
• Unikezelo lwamandla othungelwano akufuneki lube sekupheleni kwenethiwekhi.

I-CANbus Connector

IiNgcaciso zobuGcisa

Ukunikezwa Amandla

• Igalelo voltage:  12 okanye 24VDC
• Uluhlu oluvumelekileyo: 10.2-28.8VDC
• Max. ukusetyenziswa kwangoku:  1A@12V 0.5A@24V

Ibhetri

• NONE Iminyaka eyi-7 eqhelekileyo kwi-25 ° C, i-backup yebhetri ye-RTC kunye nedatha yenkqubo, kubandakanywa idatha eguquguqukayo.
• Inokubuyiselwa:  Ewe, ngaphandle kokuvula isilawuli.

Umzobo wokuBonisa iSkrini
Jonga iNqaku loku-1

• Uhlobo lweLCD  : TFT
• Isibane sokukhanyisa : I-LED emhlophe
• Bonisa isisombululo, pixels :00×600 (SVGA)
• Viewindawo yokulala: 12.1″
• Imibala : 65,536 (16-bit)
• Isikrini esibanjwayo: Ukuxhathisa, i-analog
• ‘Ukubonisa ': Nge-buzzer
• Ukukhanya kwesikrini : Nge-software (Ixabiso leGcina kwi-SI 9).
• Iphedi yamaqhosha: Ibonisa ikhibhodi enenyani xa usetyenziso lufuna ukungena kwedatha.
  Amanqaku: 1 Qaphela ukuba isikrini se-LCD sinokuba nepixel enye ehlala imnyama okanye imhlophe ngokusisigxina.

InkquboInkumbulo ekhutshwayo
Ikhadi le-Micro-SD Iyahambelana namakhadi e-micro-SD akhawulezayo; datalogs yokugcina, Alarms, Trends, Data Tables, Ileli yokugcina, HMI, kunye OS. Jonga iNqaku lesi-2
Amanqaku: 2. Umsebenzisi kufuneka afomethe ngeUnitronics SD izixhobo eziluncedo.

Unxibelelwano

Amanqaku:

• 3. Umgangatho wezibuko ngalinye umiselwe nokuba yi-RS232/RS485 ngokwezicwangciso zokutshintsha kweDIP. Jonga kwiSikhokelo soFakelo.
• 4. Izibuko le-USB lingasetyenziselwa inkqubo, ukhuphelo lwe-OS, kunye nofikelelo lwePC. Qaphela ukuba umsebenzi wezibuko we-COM unqunyanyisiwe xa eli zibuko liqhagamshelwe ngokwasemzimbeni kwiPC.
• 5. Ixhasa zombini i-12 kunye ne-24VDC umbane we-CANbus, (±4%), ubuninzi be-40mA kwiyunithi nganye. Qaphela ukuba ukuba i-12 VDC isetyenzisiwe, ubude bekhebula eliphezulu buziimitha ezili-150.

Mna / Os
Inani le-I/Os kunye neentlobo ziyahluka ngokwemodyuli. Ixhasa ukuya kuthi ga kwi-1024 yedijithali, isantya esiphezulu, kunye ne-analog I/Os.
Iimodyuli ze-Snap-in I/O : Iiplagi kwizibuko elingasemva ukwenza i-PLC ezimeleyo ukuya kuthi ga kwi-62 I/Os.
Ukwandiswa kweemodyuli : I-adapter yendawo (PN EX-A1), nge-I/O Expansion Port. Hlanganisa ukuya kuthi ga kwi-8 I/O yeeModyuli zoKwandiswa ezibandakanya ukuya kuthi ga kwi-128 ezongezelelweyo ze-I/O.
I-adapter ekude (PN EX-RC1), nge-CANbus port. Qhagamshela ukuya kuthi ga kwiiadaptha ezingama-60; qhagamshela ukuya kwi-8 I / O iimodyuli zokwandisa kwi-adapter nganye.
Exp. Ukwahlulwa kwezibuko : IGalvanic

Imilinganiselo

• UbungakananiL: 313.1X244.6X59.1mm “12.32 ) X “9.62 X2.32”). Jonga inqaku lesi-6
• Ubunzima : 1.7kg (60 oz)
  Amanqaku: 6. Ngemilinganiselo echanekileyo, jonga kwiSikhokelo soFakelo semveliso.

Ukunyuka

• Ukufakwa kwePaneli:  Ngezibiyeli

Okusingqongileyo

• Ngaphakathi kwiKhabhinethi:  IP20 / NEMA1 (ityala)
• Iphaneli inyusiwe : IP65/66/NEMA4X (iphaneli yangaphambili)
• Ubushushu bokusebenza : 0 ukuya ku-50ºC (32 ukuya ku-122ºF)
• Ubushushu bokugcina :-20 ukuya ku-60ºC (-4 ukuya ku-140ºF)
• Ubuntu bezizalwane:  (RH) 5% ukuya kuma-95% (ayi-condensing)

Ulwazi olukolu xwebhu lubonisa iimveliso ngomhla wokushicilela. I-Unitronics inelungelo, ngokuxhomekeke kuyo yonke imithetho esebenzayo, nangaliphi na ixesha, ekukuphela kwayo
ngokwengqiqo, kwaye ngaphandle kwesaziso, ukuyeka okanye ukutshintsha iimpawu, uyilo, imathiriyeli kunye nezinye iinkcukacha zeemveliso zayo, nokuba ngokusisigxina okanye
ukurhoxisa okwethutyana nayiphi na into eshiyiweyo kwimarike. Lonke ulwazi kolu xwebhu lunikelwe “njengoko lunjalo” ngaphandle kwewaranti yalo naluphi na uhlobo, nokuba ichaziwe okanye ichaziwe, kuquka kodwa ingaphelelanga kuzo naziphi na iziqinisekiso ezichaziweyo zokurhwebelana, ukufaneleka kwenjongo ethile, okanye ukungonaki. I-Unitronics ayithathi xanduva ngeempazamo okanye ukushiyeka kulwazi olunikwe kolu xwebhu. Akukho siganeko siya kuba noxanduva lwawo nawuphi na umonakalo okhethekileyo, ongalindelekanga, ongathanga ngqo okanye olandelelweyo walo naluphi na uhlobo, okanye nawuphina umonakalo onokuthi uvele ngenxa okanye ngokunxulumene nokusetyenziswa okanye ukwenziwa kolu lwazi. Amagama orhwebo, iimpawu zorhwebelwano, iilogo kunye neempawu zenkonzo ezithiwe thaca kolu xwebhu, kubandakanywa noyilo lwazo, ziyipropathi ye-Unitronics (1989) (R”G) Ltd. okanye amanye amaqela esithathu kwaye akuvumelekanga ukuzisebenzisa ngaphandle kokubhaliweyo kwangaphambili. imvume yeUnitronics okanye umntu wesithathu onokuba ngabanini bazo.

Amaxwebhu / Izibonelelo

I-UNITRONICS V1210-T20BJ Abalawuli beNgqiqo kunye nePhaneli yeHMI eEmbedded [pdf] Isikhokelo somsebenzisi I-V1210-T20BJ Abalawuli beNgcaciso kunye nePhaneli ye-HMI eEmbedded, i-V1210-T20BJ, i-Logic Controllers kunye nePhaneli ye-HMI eEmbedded

Iimbekiselo

• Incwadi yokusebenzisa