UNITRONICS V1210-T20BJ Masu Gudanar da dabaru tare da Haɗin HMI Panel
Babban Bayani
V1210 OPLCs masu kula da dabaru ne masu shirye-shirye waɗanda suka ƙunshi ginannen ginin aiki wanda ke ɗauke da allon taɓawa mai launi 12.1.
Sadarwa
- 2 keɓaɓɓen tashar jiragen ruwa RS232/RS485
- Kebul na shirye-shiryen tashar jiragen ruwa (Mini-B)
- Tashar tashar CANbus keɓe
- Mai amfani zai iya yin oda da shigar da ƙarin tashar jiragen ruwa. Wannan na iya zama ko dai Ethernet ko serial.
- Tubalan Ayyukan Sadarwa sun haɗa da: SMS, GPRS, MODBUS serial/IP; Protocol FB yana bawa PLC damar sadarwa tare da kusan kowace na'ura ta waje, ta hanyar sadarwar serial ko Ethernet
Zaɓuɓɓukan I/O
V1210 tana goyan bayan dijital, babban sauri, analog, nauyi da ma'aunin zafin jiki I/Os ta:
- Modulolin I/O Snap-in
Toshe cikin bayan mai sarrafawa don samar da saitin I/O akan jirgin
I/O Expansion Modules
Za a iya ƙara I/O na gida ko na nesa ta hanyar fadada tashar jiragen ruwa ko CANbus.
Ana iya samun umarnin shigarwa da sauran bayanai a cikin takardar ƙayyadaddun fasaha na ƙirar.
Yanayin Bayani Wannan yanayin yana ba ku damar:
- Daidaita allon taɓawa
- View & Shirya dabi'u na operand, saitunan tashar tashar COM, RTC da bambancin allo/ saitunan haske
- Tsaya, fara, kuma sake saita PLC
Don shigar da Yanayin Bayani, danna allon taɓawa kuma kula da lamba na daƙiƙa da yawa.
Shirye-shiryen Software, & Utilities
Saitin CD ɗin Unitronics ya ƙunshi software na VisiLogic da sauran abubuwan amfani
- VisiLogic
Sauƙaƙe daidaita kayan aiki da rubuta duka HMI da aikace-aikacen sarrafa tsani; Laburaren Ayyukan Block yana sauƙaƙe ayyuka masu rikitarwa kamar PID. Rubuta aikace-aikacen ku, sannan zazzage shi zuwa ga mai sarrafawa ta hanyar kebul na shirye-shirye da ke cikin kit ɗin. - Abubuwan amfani
Waɗannan sun haɗa da uwar garken UniOPC, Samun Nesa don shirye-shiryen nesa da bincike, da DataXport don shigar da bayanai na lokaci.
Don koyon yadda ake amfani da tsara mai sarrafawa, da kuma amfani da abubuwan amfani kamar Nesa Dama, koma zuwa tsarin Taimakon VisiLogic.
Mai cirewa Ma'ajiyar Ƙwaƙwalwa
Katin Micro-SD: ɗakunan ajiya na bayanai, Ƙararrawa, Trends, Tables Data; fitarwa zuwa Excel; madadin Ladder, HMI & OS kuma amfani da wannan bayanan zuwa 'clone' PLCs.
Don ƙarin bayanai, koma zuwa batutuwan SD a cikin tsarin Taimakon VisiLogic.
Tables Data : Teburan bayanai suna ba ku damar saita sigogin girke-girke da ƙirƙirar rajistan bayanai.
Ƙarin takaddun samfurin yana cikin Laburaren Fasaha, wanda yake a www.unitronicsplc.com.
Akwai tallafin fasaha a wurin, kuma daga support@unitronics.com.
Daidaitaccen Abubuwan Abubuwan Kit
- Mai sarrafa hangen nesa: baka (x8)
- Mai haɗa wutar lantarki 3: Rubber hatimi
- 5 pin CANbus connector
- CANbus network termination resistor
- Baturi (ba a shigar da shi ba)
Alamomin Hatsari
Lokacin da ɗayan waɗannan alamomin suka bayyana, karanta bayanan haɗin gwiwa a hankali.
| Alama | Ma'ana | Bayani | |
 |
hadari | Hadarin da aka gano yana haifar da lalacewar jiki da ta dukiya. | |
Kaution |
Gargadi
Tsanaki |
Hatsarin da aka gano na iya haifar da asarar ta jiki da ta dukiya.
Yi amfani da hankali. |
- Kafin amfani da wannan samfurin, mai amfani dole ne ya karanta kuma ya fahimci wannan takarda.
- Duk examples da zane-zane an yi nufin su taimaka fahimta, kuma ba su da garantin aiki. Unitronics ba ta karɓar alhakin ainihin amfani da wannan samfurin bisa waɗannan tsoffinamples.
- Da fatan za a zubar da wannan samfurin bisa ga ƙa'idodi da ƙa'idodi na gida da na ƙasa.
- ƙwararrun ma'aikatan sabis ne kawai ya kamata su buɗe wannan na'urar ko su yi gyara.
Rashin bin ƙa'idodin tsaro masu dacewa na iya haifar da mummunan rauni ko lalacewar dukiya.
- Kada kayi ƙoƙarin amfani da wannan na'urar tare da sigogi waɗanda suka wuce matakan izini.
- Don guje wa lalata tsarin, kar a haɗa/ cire haɗin na'urar lokacin da wuta ke kunne.
La'akarin Muhalli
- Kada a sanyawa a cikin wuraren da: ƙura mai wuce kima ko mai ɗaurewa, iskar gas mai lalacewa ko mai ƙonewa, danshi ko ruwan sama, zafi mai yawa, girgiza ta yau da kullun ko girgiza mai wuce kima, daidai da ƙa'idodin da aka bayar a cikin takaddar ƙayyadaddun samfur.
- Samun iska: 10mm sarari da ake buƙata tsakanin saman mai sarrafawa / gefuna na ƙasa & bangon shinge.
- Kada a sanya a cikin ruwa ko barin ruwa ya zubo kan naúrar.
- Kada ka bari tarkace su fada cikin naúrar yayin shigarwa.
- Sanya a matsakaicin nisa daga babban-voltage igiyoyi da kayan wuta.
Farashin UL
Sashe mai zuwa ya dace da samfuran Unitronics waɗanda aka jera tare da UL.
- Samfurin: V1210-T20BJ UL ne da aka jera don wurare masu haɗari.
- Samfurin: V1210-T20BJ shine UL da aka jera don Wuri na Musamman.
UL Talakawa Wuri
Domin saduwa da daidaitaccen wurin UL na yau da kullun, panel-hana wannan na'urar akan shimfidar shimfidar nau'in 1 ko 4 X.
Ƙididdigar UL, Masu Gudanar da Shirye-shiryen don Amfani a Wurare masu Haɗari, Class I, Division 2, Rukunin A, B, C da D
Waɗannan Bayanan Bayanin Sakin suna da alaƙa da duk samfuran Unitronics waɗanda ke ɗauke da alamun UL da aka yi amfani da su don yiwa samfuran da aka yarda don amfani a wurare masu haɗari, Class I, Division 2, Rukunin A, B, C da D.
Tsanaki:
- Wannan kayan aikin ya dace don amfani a cikin Class I, Division 2, Rukunin A, B, C da D, ko wurare marasa haɗari kawai.
- Wayoyin shigarwa da fitarwa dole ne su kasance daidai da Class I, hanyoyin wayoyi na Division 2 kuma daidai da ikon da ke da iko.
- GARGADI-Hazarar fashewa-masanin abubuwan da aka gyara na iya lalata dacewa ga Class I, Division 2.
- GARGADI – HAZARAR FASHE – Kar a haɗa ko cire haɗin kayan aiki sai dai idan an kashe wuta ko kuma an san wurin ba shi da haɗari.
- GARGADI - Bayyanawa ga wasu sinadarai na iya lalata kaddarorin rufe kayan da ake amfani da su a Relays.
- Dole ne a shigar da wannan kayan aikin ta hanyar amfani da hanyoyin wayoyi kamar yadda ake buƙata don Class I, Division 2 kamar yadda NEC da/ko CEC ke buƙata.
Panel-Mounting
Don masu sarrafa shirye-shirye waɗanda za a iya saka su kuma a kan panel, don saduwa da ma'aunin UL Haz Loc, panel-hana wannan na'urar akan shimfidar shimfidar Nau'in 1 ko Nau'in 4X.
Sadarwa da Ma'ajiyar Ƙwaƙwalwar Cirewa
Lokacin da samfuran suka ƙunshi ko dai tashar sadarwar USB, Ramin katin SD, ko duka biyun, ba ramin katin SD ko tashar USB ba ana nufin haɗa su ta dindindin, yayin da tashar USB an yi niyya don shirye-shirye kawai.
Cire / Maye gurbin baturi
Lokacin da aka shigar da samfur tare da baturi, kar a cire ko musanya baturin sai dai idan an kashe wuta, ko kuma an san wurin ba shi da haɗari. Lura cewa ana ba da shawarar adana duk bayanan da ke cikin RAM, don guje wa asarar bayanai lokacin canza baturi yayin da aka kashe wuta. Hakanan ana buƙatar sake saita bayanan kwanan wata da lokaci bayan aikin.
Saka Batirin
Domin adana bayanai idan an kashe wuta, dole ne ka saka baturin.
Ana ba da baturin manne akan murfin baturin da ke bayan mai sarrafawa.
- Cire murfin baturin da aka nuna a shafi na 6. Alamar polarity (+) tana kan mariƙin baturi da kan baturin.
- Saka baturin, tabbatar da cewa alamar polarity akan baturin shine:
- fuskantar sama
- daidaita da alamar akan mariƙin
- Sauya murfin baturin.
Yin hawa
Girma
Lura cewa allon LCD yana iya samun pixel guda ɗaya wanda ke dindindin ko dai baki ko fari.
Ruwa na Panel
Kafin ka fara, lura cewa hawan panel ba zai iya zama fiye da 5 mm lokacin farin ciki ba.
- Yi yankan panel bisa ga ma'auni a cikin adadi zuwa dama.
- Zamar da mai sarrafawa a cikin yanke, tabbatar da cewa hatimin roba yana wurin.
- Tura madaidaicin hawa 8 a cikin ramummuka a gefen mai sarrafawa kamar yadda aka nuna a adadi zuwa dama.
- Matsa madaidaicin sukurori a kan panel. Riƙe madaidaicin amintacce akan naúrar yayin da kuke ƙara matsawa.
- Lokacin da aka ɗora shi da kyau, mai sarrafa yana nan daidai a cikin yanke panel kamar yadda aka nuna a ƙasa.
Lura: Domin UL da aka jera module, domin saduwa da UL508 misali, panel-hau wannan na'urar a kan lebur surface na Type 1 yadi.
Waya
- Kar a taɓa wayoyi masu rai.
- Shigar da na'urar kashewa ta waje. Kare gajeriyar kewayawa a cikin wayoyi na waje.
- Yi amfani da na'urorin kariya da suka dace.
- Kada a haɗa fil ɗin da ba a yi amfani da shi ba. Yin watsi da wannan umarnin na iya lalata na'urar.
- Bincika duk wayoyi sau biyu kafin kunna wutar lantarki.
- Tsanaki:
- Don guje wa lalata waya, kar a wuce iyakar ƙarfin 0.5 N·m (5 kgf·cm).
- Kada a yi amfani da gwano, solder, ko wani abu akan fitaccen waya wanda zai iya sa igiyar waya ta karye.
- Sanya a matsakaicin nisa daga babban-voltage igiyoyi da kayan wuta.
Tsarin Waya
Yi amfani da crimp tashoshi don wayoyi; amfani 26-12 AWG waya (0.13 mm 2 -3.31 mm2)
- Cire waya zuwa tsawon 7± 0.5 mm (0.250-0.300 inci).
- Cire tashar zuwa mafi girman matsayi kafin saka waya.
- Saka waya gaba daya a cikin tashar don tabbatar da haɗin kai mai kyau.
- Maƙarƙashiya don kiyaye waya daga ja kyauta.
Tushen wutan lantarki
Mai sarrafawa V1210-T20BJ yana buƙatar ko dai na waje 12 ko 24VDC samar da wutar lantarki. Izinin shigarwa voltage kewayon: 10.2-28.8VDC, tare da kasa da 10% ripple.
- Dole ne samar da wutar lantarki ya haɗa da rufin biyu. Dole ne a ƙididdige abubuwan da aka fitar azaman SELV/PELV/Class 2/Ikantaccen Ƙarfi.
- Kar a haɗa ko dai siginar 'Neutral ko' Layi' na 110/220VAC zuwa fil ɗin 0V na na'urar.
- Shigar da na'urar kashewa ta waje. Kare gajeriyar kewayawa a cikin wayoyi na waje.
- Bincika duk wayoyi sau biyu kafin kunna wutar lantarki.
- A cikin lamarin voltage sauye-sauye ko rashin daidaituwa ga voltage Ƙayyadaddun wutar lantarki, haɗa na'urar zuwa tsarin samar da wutar lantarki.
Farashin OPLC
Don haɓaka aikin tsarin, guje wa tsangwama ta hanyar:
- Hawan mai sarrafawa akan karfen karfe.
- Haɗa tashar tashar ƙasa mai aiki na OPLC, da gama gari da layin ƙasa na I/Os, kai tsaye zuwa ƙasan tsarin ku.
- Don yin wayoyi na ƙasa, yi amfani da waya mafi guntu kuma mafi kauri.
Tashoshin Sadarwa
Wannan jerin ya ƙunshi tashar USB, 2 RS232/RS485 serial port da tashar CANbus. Ana iya yin odar ƙarin tashar jiragen ruwa daban kuma a shigar. Wannan tashar jiragen ruwa na iya zama ko dai Ethernet, ko serial (COM 3). Don ƙarin cikakkun bayanai game da tashoshin jiragen ruwa da shigarwar su, da fatan za a duba Laburaren Fasaha a www.unitronics.com.
- Kashe wuta kafin yin haɗin sadarwa.
- Tsanaki: Yi amfani da adaftan tashar tashar jiragen ruwa koyaushe.
Ana iya amfani da tashar USB don shirye-shirye, zazzagewar OS, da samun damar PC. Lura cewa an dakatar da aikin COM tashar jiragen ruwa 1 lokacin da aka haɗa wannan tashar ta jiki zuwa PC. Serial tashoshin jiragen ruwa nau'in RJ-11 ne kuma ana iya saita su zuwa ko dai RS232 ko RS485 ta hanyar sauya DIP, daidai da tebur da aka nuna a ƙasa. Yi amfani da RS232 don zazzage shirye-shirye daga PC, da kuma sadarwa tare da na'urori da aikace-aikace, kamar SCADA. Yi amfani da RS485 don ƙirƙirar cibiyar sadarwa mai ɗimbin yawa mai ɗauke da na'urori 32.
Pinouts
- Abubuwan da ke ƙasa suna nuna alamun tashar tashar PLC.
- Don haɗa PC zuwa tashar jiragen ruwa da aka saita zuwa RS485, cire haɗin RS485, kuma haɗa PC zuwa PLC ta hanyar kebul na shirye-shirye. Lura cewa wannan yana yiwuwa ne kawai idan ba a yi amfani da siginar sarrafa kwarara ba (wanda shine daidaitaccen yanayin).
RS232 Pin # Descrabuwa 1* Farashin DTR 2 0V nuni 3 Alamar TXD 4 RXD sigina 5 0V nuni 6* Bayanin DSR RS485** Ctashar jiragen ruwa Pin # Descrabuwa 
1 Sigina (+) 2 (Siginar RS232) 3 (Siginar RS232) 4 (Siginar RS232) 5 (Siginar RS232) 6 Sigina B (-) - Madaidaitan igiyoyin shirye-shirye ba sa samar da wuraren haɗi don fil 1 da 6.
- Lokacin da aka daidaita tashar jiragen ruwa zuwa RS485, ana amfani da Pin 1 (DTR) don siginar A, kuma ana amfani da siginar Pin 6 (DSR) don siginar B.
RS232 zuwa RS485: Canja Saitunan Canja DIP
An saita tashoshin jiragen ruwa zuwa RS232 ta tsohuwar masana'anta. Don canza saitunan, fara cire Snap-in I/O Module, idan an shigar da ɗaya, sannan saita maɓalli bisa ga tebur mai zuwa.
RS232/RS485: Saitunan Sauya DIP
Saitunan da ke ƙasa suna don kowane tashar COM.
| SSaitunan mayya | ||||||
| 1 | 2 | 3 | 4 | 5 | 6 | |
| RS232* | ON | ON | ON | KASHE | ON | KASHE |
| RS485 | KASHE | KASHE | KASHE | ON | KASHE | ON |
| RS485 tare da ƙarewa *** | ON | ON | KASHE | ON | KASHE | ON |
Saitin masana'anta na asali
Yana sa naúrar yin aiki azaman naúrar ƙarshe a cibiyar sadarwar RS485
Sanya Module I/O Snap-in
- Kafin shigar da Module Snap-In, tabbatar cewa an rufe murfin Module na Sadarwa.
- Cire hular haɗin I/O da aka nuna akan shafi na 6.
- Yi layi da jagororin madauwari akan Module Snap-in I/O tare da ramummuka akan mai sarrafawa kamar yadda aka nuna a ƙasa.
- Aiwatar ko da matsi akan duk kusurwoyi 4 har sai kun ji wani takamaiman 'danna'. An shigar da tsarin yanzu. Bincika cewa duk bangarorin da sasanninta sun daidaita daidai.
Cire Module I/O Snap-in
- Nemo maɓallai huɗu a gefen mai sarrafawa, biyu a kowane gefe.
- Danna maɓallan kuma ka riƙe su ƙasa don buɗe hanyar kullewa.
- A hankali girgiza module ɗin daga gefe zuwa gefe, sauƙaƙe tsarin daga mai sarrafawa.
CANbus
Waɗannan masu sarrafa sun ƙunshi tashar CANbus. Yi amfani da wannan don ƙirƙirar cibiyar sadarwar sarrafawa ta hanyar amfani da ɗaya daga cikin ka'idojin CAN masu zuwa:
- CAN Buɗe: 127 masu sarrafawa ko na'urorin waje
- CANLayer 2
- UniCAN ta mallaka ta Unitronics: masu sarrafawa 60, (bayanin bayanan 512 a kowane scan)
Tashar jiragen ruwa ta CANbus ta keɓe.
CANbus Wiring
- Yi amfani da igiyar murɗaɗi-biyu. DeviceNet® mai kauri mai kauri mai kauri mai murɗaɗɗen kebul ana shawarar.
- Ƙarshen hanyar sadarwa: Ana kawo waɗannan tare da mai sarrafawa. Sanya masu ƙarewa a kowane ƙarshen hanyar sadarwar CANbus.
- Dole ne a saita juriya zuwa 1%, 121Ω, 1/4W.
- Haɗa siginar ƙasa zuwa ƙasa a wuri ɗaya kawai, kusa da wutar lantarki.
- Ba dole ba ne wutar lantarki ta hanyar sadarwa ta kasance a ƙarshen hanyar sadarwa.
CANbus Connector
Ƙididdiga na Fasaha
Tushen wutan lantarki
- Shigar da kunditage: 12 ko 24VDC
- Kewayon halatta: 10.2-28.8VDC
- Max. amfani na yanzu: 1A@12V 0.5A@24V
Baturi
- Ajiyayyen: Shekaru 7 na yau da kullun a 25°C, ajiyar baturi don RTC da bayanan tsarin, gami da bayanan canji.
- Mai maye gurbin: Ee, ba tare da buɗe mai sarrafawa ba.
Allon Nuni Zane
Duba bayanin kula 1
- Nau'in LCD Saukewa: TFT
- Hasken baya: Farin LED
- Nuni ƙuduri, pixels : 00×600 (SVGA)
- Viewyankin: 12.1"
- Launuka : 65,536 (16-bit)
- Kariyar tabawa: Resistive, analog
- ‘Alamar taɓawa: Ta hanyar buzzer
- Hasken allo: Ta hanyar software (Kimanin Store zuwa SI 9).
- Madanni: Yana nuna madanni na kama-da-wane lokacin da aikace-aikacen ke buƙatar shigarwar bayanai.
Bayanan kula: 1 Lura cewa allon LCD yana iya samun pixel guda ɗaya wanda ke dindindin ko dai baki ko fari.
Shirin
Memory mai cirewa
Katin Micro-SD Mai jituwa tare da katunan micro-SD masu sauri; adana bayanai, Ƙararrawa, Trends, Data Tables, madadin Tsani, HMI, da OS. Duba bayanin kula 2
Bayanan kula2. Dole ne mai amfani ya tsara ta hanyar amfani da kayan aikin Unitronics SD.
Sadarwa
Bayanan kula:
- 3. An saita ma'auni na kowane tashar jiragen ruwa zuwa ko dai RS232/RS485 bisa ga saitunan sauya DIP. Koma zuwa Jagoran Shigarwa.
- 4. Ana iya amfani da tashar USB don shirye-shirye, zazzagewar OS, da samun damar PC. Lura cewa an dakatar da aikin tashar tashar COM lokacin da aka haɗa wannan tashar ta jiki zuwa PC.
- 5. Yana goyan bayan duka 12 da 24VDC CANbus wutar lantarki, (± 4%), 40mA matsakaicin kowace naúrar. Lura cewa idan aka yi amfani da 12 VDC, matsakaicin tsayin kebul ɗin shine mita 150.
Ni / Os
Adadin I/Os da nau'ikan sun bambanta bisa ga tsarin. Yana goyan bayan har zuwa 1024 dijital, babban sauri, da I/Os na analog.
Snap-in I/O modules : Toshe cikin tashar jiragen ruwa na baya don ƙirƙirar PLC mai ƙunshe da har zuwa 62 I/Os.
Na'urorin haɓakawa: Adaftar gida (PN EX-A1), ta hanyar I/O Expansion Port. Haɗa har zuwa 8 I/O Expansion Modules wanda ya ƙunshi ƙarin ƙarin I/O 128.
Adafta mai nisa (PN EX-RC1), ta tashar CANbus. Haɗa har zuwa adaftan 60; haɗa har zuwa 8 I/O fadada kayayyaki zuwa kowane adaftan.
Exp. keɓewar tashar jiragen ruwa: Galvanic
Girma
- Girman L: 313.1X244.6X59.1mm “12.32) X “9.62 X2.32”). Duba bayanin kula 6
- Nauyi : 1.7kg (60 oz)
Bayanan kula: 6. Don ainihin ma'auni, koma zuwa Jagorar Shigarwa na samfur.
Yin hawa
- Hawan panel: Ta maƙarƙashiya
Muhalli
- Cikin majalisar ministoci: IP20 / NEMA1 (harka)
- An saka panel: IP65/66/NEMA4X (fashin gaba)
- Yanayin aiki: 0 zuwa 50ºC (32 zuwa 122ºF)
- Yanayin ajiya:-20 zuwa 60ºC (-4 zuwa 140ºF)
- Danshi na Dangi: (RH) 5% zuwa 95%
Bayanan da ke cikin wannan takarda yana nuna samfurori a ranar bugawa. Unitronics yana da haƙƙi, ƙarƙashin duk dokokin da suka dace, a kowane lokaci, a tafin sa
hankali, kuma ba tare da sanarwa ba, don dakatar ko canza fasali, ƙira, kayan aiki da sauran ƙayyadaddun samfuran sa, kuma zuwa ko dai na dindindin ko
cire duk wani abu na ɗan lokaci daga kasuwa. Duk bayanan da ke cikin wannan takarda an bayar da su “kamar yadda yake” ba tare da garanti na kowane iri ba, ko dai bayyanawa ko bayyananne, gami da amma ba'a iyakance ga kowane garanti na kasuwanci ba, dacewa don wata manufa, ko rashin cin zarafi. Unitronics ba shi da alhakin kurakurai ko rashi a cikin bayanan da aka gabatar a cikin wannan takaddar. Babu wani yanayi da Unitronics zai zama abin dogaro ga kowane na musamman, na bazata, kaikaice ko lahani na kowane iri, ko duk wani lahani da ya taso daga ko dangane da amfani ko aikin wannan bayanin. Sunayen kasuwanci, alamun kasuwanci, tambura da alamun sabis da aka gabatar a cikin wannan takaddar, gami da ƙirar su, mallakar Unitronics (1989) (R”G) Ltd. ko wasu ɓangarori na uku kuma ba a ba ku izinin amfani da su ba tare da rubutaccen izinin Unitronics ko wani ɓangare na uku wanda zai iya mallake su.
Takardu / Albarkatu
 |
UNITRONICS V1210-T20BJ Masu Gudanar da dabaru tare da Haɗin HMI Panel [pdf] Jagorar mai amfani V1210-T20BJ Masu kula da dabaru tare da Haɗin HMI Panel, V1210-T20BJ, Masu sarrafa dabaru tare da Haɗin HMI Panel |
