SP20 Series High Speed programmer
“
Litlhaloso:
- Lebitso la Sehlahisoa: SP20 Series Programmer
- Moetsi: SHENZHEN SFLY TECHNOLOGY CO.LTD.
- Letsatsi la Phatlalatso: May 7, 2024
- Phetolelo: A5
- E tšehetsa: SPI NOR FLASH, I2C, MicroWire EEPROMs
- Sehokelo sa Puisano: USB Type-C
- Phepelo ea Matla: Mokhoa oa USB - ha ho na matla a kantle a hlokahalang
Litaelo tsa Tšebeliso ea Sehlahisoa:
Khaolo ea 3: Ho Potlakela ho Sebelisa
3.1 Mosebetsi oa ho itokisa:
Netefatsa hore sebatli se hokahane le komporo ka USB
Sehokelo sa mofuta oa C. Ha ho na motlakase o hlokahalang kantle ho USB
mokgoa.
3.2 Ho hlophisa chip ea hau:
Latela litaelo tse fanoeng tsa software ho hlophisa chip ea hau
sebelisa SP20 Series Programmer.
3.3 Bala data ea chip le ho hlophisa chip e ncha:
U ka bala lintlha tse teng tsa chip le ho hlophisa chip e ncha ka
ho latela mehato e hlalositsoeng bukeng ea mosebelisi.
3.4 Boemo ba sesupo mokhoeng oa USB:
Sheba mabone a sesupo ho moetsi oa lenaneo ho utloisisa
boemo ba sesebelisoa ka mokhoa oa USB.
Khaolo ea 4: Lenaneo la Standalone
4.1 Khoasolla data e ikemetseng:
Khoasolla lintlha tse hlokahalang bakeng sa mananeo a ikemetseng ho
chip e hahelletsoeng ka har'a memori ea moetsi oa lenaneo.
4.2 Ts'ebetso ea mananeo a ikemetseng:
Etsa ts'ebetso ea mananeo a ikemetseng joalo ka ha ho hlalositsoe ho
tataiso. Sena se kenyelletsa mokhoa oa matsoho le mokhoa oa ho laola othomathike ka
Khokahano ea ATE.
4.3 Boemo ba sesupo ka mokhoa o ikemetseng:
Utloisisa boemo ba sesupo ha u ntse u sebetsa ka mokhoa o ikemetseng
mokhoa oa ho etsa mananeo a sebetsang hantle.
Khaolo ea 5: Lenaneo ka mokhoa oa ISP
Sheba buka ea mosebelisi bakeng sa litaelo tse qaqileng ka
lenaneo ka mokhoa oa ISP.
Khaolo ea 6: Lenaneo ka Mokhoa oa Multi-machine
Ithute ka likhokahano tsa Hardware le ts'ebetso ea ho etsa mananeo bakeng sa
lenaneo la mekhoa e mengata ea mechine.
LBH:
P: Ke mefuta efe ea li-memory chips e tšehetsoeng ke SP20
Series Programmer?
A: Lenaneo le tšehetsa SPI NOR FLASH, I2C,
MicroWire, le li-EEPROM tse ling tse tsoang ho bahlahisi ba fapaneng bakeng sa
lenaneo la tlhahiso ea bongata bo phahameng.
"`
+
SP20B/SP20F/SP20X/SP20P
Bukana ea Mosebelisi oa Lenaneo
Letsatsi la Phatlalatso: May 7, 2024 Revision A5
SHENZHEN SFLY TECHNOLOGY CO.LTD.
LIEKETSENG
SP20 Series Programmer
Bukana ea Mosebelisi
Khaolo ea 1 Selelekela
1.1 Litšobotsi tsa Tshebetso ————————————————————————————— 3 1.2 SP20 series programmer parameter table ——————————————————————— 4
Khaolo ea 2 Programmer Hardware
2.1 Sehlahisoa se Felletseview ————————————————————————————————— 5 2.2 Keketso ya Sehlahiswa ———————————————————————————————— 5
Khaolo ea 3 e Potlakile ho Sebelisa
3.1 Mosebetsi oa boitokisetso ———————————————————————————————————————————————————————————————–6 3.2 Bala chip data le lenaneo le lecha ————————————————————————-6 3.3 Boemo ba sesupo mokgweng wa USB—————————————————————————————8
Khaolo ea 4 Lenaneo le ikemetseng
4.1 Khoasolla data e ikemetseng
Manual mode———————————————————————————————————-12 Automatic control mode (control via ATE interface) ——————————————————–12 4.3 Boemo ba pontšo ka mokhoa o ikemetseng ———————————————————————————————————————————————————————————————————————————————
Khaolo ea 5 Lenaneo ka mokhoa oa ISP
5.1 Kgetha ISP programming mode ——————————————————————————–13 5.2 ISP interface definition ———————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————. ——————————————————————————————————————————————————————————————————————————————————————————————————————13
Khaolo ea 6 Programming ka Multi-machine Mode
6.1
Sehlomathiso 1
FAQ —————————————————————————————————————————- 17
Sehlomathiso 2
Boitlhotlhollo —————————————————————————————————————————
Sehlomathiso 3
Revision History —————————————————————————————————————20
- 2 -
SP20 Series Programmer
Bukana ea Mosebelisi
Khaolo ea 1 Selelekela
Li-program tsa SP20 (SP20B/SP20F/ SP20X/SP20P) ke baetsi ba morao-rao ba lebelo le phahameng la tlhahiso ea bongata bakeng sa SPI FLASH e thakhotsoeng ke Shenzhen SFLY Technology. E ts'ehetsa ka botlalo lenaneo la lebelo le phahameng la SPI NOR FLASH, I2C / MicroWire le li-EEPROM tse ling tse tsoang ho baetsi ba malapeng le ba kantle ho naha.
Litšobotsi tsa Ts'ebetso ea 1.1
Likarolo tsa Hardware
Sehokelo sa puisano sa USB Type-C, ha se hloke phepelo ea motlakase kantle ha se sebelisoa ka mokhoa oa USB; Ts'ehetsa USB le mokhoa o ikemetseng oa lenaneo la tlhahiso ea boima bo phahameng; Sesepa sa memori se nang le bokhoni bo boholo se boloka data ea boenjiniere bakeng sa mananeo a ikemetseng, le a mangata
Netefatso ea data ea CRC e netefatsa hore data ea lenaneo e nepahetse ka botlalo; Socket ea ZIF e ka nkeloang sebaka ea 28-pin, e ka tšehetsoang ke metheo e tloaelehileng ea mananeo a bokahohleng; Pontšo ea OLED, ka pono e bonts'a tlhaiso-leseling ea hajoale ea ts'ebetso ea moetsi oa lenaneo; RGB ea mebala e meraro ea LED e bontša boemo ba ho sebetsa, 'me buzzer e ka etsa hore ho atlehe le ho hlōleha ha
mananeo; Ts'ehetsa ho sibolloa ha li-pin tse fokolang, ho ntlafatsa ts'epahalo ea lenaneo ka nepo; Ts'ehetsa lenaneo la ISP mode, le ka ts'ehetsang mananeo a boto ea li-chips tse ling; Mekhoa e mengata ea ho qala mananeo: ho qala likonopo, ho beha li-chip (ho beoa ha chip ka bohlale
le ho tlosoa, lenaneo la ho qalisa ka mokhoa o itekanetseng), taolo ea ATE (sebopeho se ikemetseng sa taolo ea ATE, se fanang ka lipontšo tse nepahetseng le tse ka tšeptjoang tsa ho laola mochine oa mananeo a kang BUSY, OK, NG, START, tšehetso e pharaletseng ea lisebelisoa tsa ho iketsetsa mananeo a bahlahisi ba sa tšoaneng); Ts'ebetso e khuts'oane ea potoloho / ts'ireletso ea overcurrent e ka sireletsa moqapi kapa chip ka katleho tšenyo ea kotsi; E ka reroang voltage moralo, mefuta e ka fetolehang ho tloha 1.7V ho 5.0V, e ka tšehetsa li-chips tsa 1.8V/2.5V/3V/3.3V/5V; Fana ka lisebelisoa tsa ho itlhahloba mosebetsi; Boholo bo nyane (boholo: 108x76x21mm), mananeo a nako e le 'ngoe a mechine e mengata e nka feela sebaka se senyenyane sa mosebetsi;
Lisebelisoa tsa software
Tšehetsa Win7/Win8/Win10/Win11; Tšehetso ea ho fetola pakeng tsa Sechaena le Senyesemane; Ts'ehetso ea ntlafatso ea software ho eketsa lisebelisoa tse ncha; Morero oa ts'ehetso file tsamaiso (morero file e boloka likarolo tsohle tsa lenaneo, ho kenyelletsa: mohlala oa chip, data
file, litlhophiso tsa mananeo, joalo-joalo); Ts'ehetsa ho bala le ho ngola ha sebaka sa polokelo e eketsehileng (sebaka sa OTP) le sebaka sa tlhophiso (registeri ea maemo,
joalo-joalo) ea chip; Ts'ehetsa temoho ea othomathiki ea letoto la 25 la SPI FLASH; Ts'ebetso ea nomoro ea serial e ikemetseng (e ka sebelisoa ho hlahisa nomoro ea serial e ikhethang ea sehlahisoa, aterese ea MAC,
Bluetooth ID, joalo-joalo,); Ts'ehetsa khokahano ea li-programmer tse ngata: komporo e le 'ngoe e ka hokahanngoa le letoto la 8 SP20
baetsi ba mananeo bakeng sa mananeo a nako e le 'ngoe, Ts'ebetso ea nomoro ea othomathike ea serial e sebetsa ka mokhoa oa multiprogrammer; Lenane la tšehetso file ho boloka;
Tlhokomeliso: Mesebetsi e ka holimo e itšetlehile ka mofuta oa sehlahisoa. Bakeng sa lintlha, ka kopo sheba tafole ea paramente ea sehlahisoa karolong ea 1.2
- 3 -
SP20 Series Programmer
Bukana ea Mosebelisi
1.2 SP20 letoto la lenaneo paramethara tafole
Sehlahisoa parameter
SP20P SP20X SP20F SP20B
Ponahalo ea Sehlahisoa
Tšehetso ea chip voltage fapaneng
1.8-5V
1.8-5V
1.8-5V
1.8-5V
Khopolo e kholo ea li-chips tse tšehetsoeng (Note1)
Letoto la li-chip tsa tšehetso (mofuta oa sefahleho)
( I2C EEPROM Microwire EEPROM SPI Flash)
Khokahano e mengata
(Khomphutha e le 'ngoe e ka hokela li-program tsa 8)
Tlhahiso e kholo ka USB
(Ithute ka bohona ho kenya le ho tlosa chip, moqapi oa auto)
Automatic serial NO.
(Lenaneo la linomoro tsa serial)
Letšoao la mosebetsi la RGB LEDs
Molaetsa oa Buzzer
Lenaneo le ikemetseng
(programming ntle le komporo, e loketseng tlhahiso ea bongata)
Tšehetsa lisebelisoa tsa boiketsetso
(Laola lisebelisoa tsa othomathike ka ATE)
Lenaneo la ISP
(Tsehetsa mefuta e meng)
Ho sebelisa usb mode ka mokhoa o ikemetseng
Konopo ea ho qala bakeng sa ho etsa mananeo
Pontšo ea OLED
Lebelo la ho etsa mananeo
(Lenaneo + netefatso) Lintlha tse felletseng
GD25Q16(16Mb) W25Q64JV(64Mb) W25Q128FV(128Mb)
1Gb
Y
Y
YYYY
YYYYY 6s 25s 47s
1Gb
Y
Y
YYYY
YYNNN 6s 25s 47s
1Gb
Y
Y
YYYY
NYNNN 6s 25s 47s
1Gb
Y
Y
YYNN
NYNNN 7s 28s 52s
“Y” e bolela hore e na kapa e tshehetsa tshebetso, “N” e bolela hore ha e na kapa ha e tshehetse tshebetso
Hlokomela 1 E ts'ehetsa ho fihla ho 1Gb ka mokhoa oa usb le 512Mb ka mokhoa o ikemetseng.
- 4 -
SP20 Series Programmer
Bukana ea Mosebelisi
Khaolo ea 2 Lisebelisoa tsa Lenaneo
2.1 Sehlahisoa se Felletseview
Ntho
Lebitso
28P ZIF socket Pontšo ea mebala e meraro
Bontša konopo ea ho qala ea OLED
Sehokelo sa USB
ISP/ATE segokanyimmediamentsi sa sebolokigolo
Etsa mohlala
Kenya chip e pakiloeng ea DIP, socket ea programming (Hlokomela: Ha e tšehetse tlhophiso ea li-chips tse holim'a board ka ho hokela terata ho tsoa soketeng ea ZIF.)
Boputsoa: PHATHAHENG; Botala: Ho lokile(o atlehile); Khubelu: HLOKA
Hlahisa boemo ba hajoale ba ts'ebetso le liphetho (ke SP20P feela e nang le karolo ena) Qala ho etsa mananeo ka ho tobetsa konopo (ke SP20P feela e nang le karolo ena)
Sebopeho sa USB Type-C
Fana ka matšoao a taolo ea mochini oa mananeo (BUSY, OK, NG, START) (SP20P le SP20X feela tse nang le ts'ebetso ena) Lenaneo la ISP bakeng sa lichifi tse rekiselitsoeng libotong.
2.2 Lisebelisoa tsa Sehlahisoa
Cable ea data ea mofuta oa C
thapo ea ISP
5V/1A adaptara ea matla
Buka ea litaelo
'Mala / ponahalo ea lisebelisoa tsa lihlopha tse fapaneng li ka fapana, ka kopo sheba sehlahisoa sa sebele;
SP20B ha e kenyelle adaptara ea matla, sebelisa feela boema-kepe ba USB bakeng sa phepelo ea motlakase; Ka kopo, tlhophiso e tloaelehileng ea moetsi oa lenaneo ha e kenyeletse sokete ea ho etsa mananeo
khetha ho ea ka litlhoko tsa hau;
- 5 -
SP20 Series Programmer
Bukana ea Mosebelisi
Khaolo ea 3 e Potlakile ho Sebelisa
Khaolo ena e nka sengoathoana sa SOIC8 (208mil) se pakiloeng SPI FLASH chip W25Q32DW joalo ka ex.ample ho hlahisa mokhoa oa SP20P oa ho hlophisa chip ka mokhoa oa USB. Lenaneo le tloaelehileng le kenyelletsa mehato e 5 e latelang:
Mananeo a ho lokisa software le hardware
Khetha mohlala oa chip
Laela file Litlhophiso tsa khetho ea ts'ebetso
3.1 Mosebetsi oa boitokiso
1) Kenya "SFLY FlyPRO II" software programmer (e kenyelletsa mokhanni oa USB, mokhanni oa USB o tla kenngoa ka mokhoa o ikhethileng ha o kenya software), tšehetsa Win7/Win8/Win10/Win11, download software URL: http://www.sflytech.com; 2) Hokela sebatli ho koung ea USB ea komporo ka thapo ea USB, 'me leseli le letala la moqapi le tla ba teng ha khokahano e tloaelehile;
Hokela koung ea USB ea komporo
3) Qala software ea "SFLY FlyPRO II", software e tla ikamahanya le moqapi, 'me fensetere e nepahetseng ea software e tla bontša mohlala oa moqapi le nomoro ea serial ea sehlahisoa. Haeba kgokelo e hloleha: ka kopo sheba hore na thapo ya USB e hokilwe; lekola hore na mokhanni oa USB o kentsoe ka katleho ho mookameli oa sesebelisoa sa komporo (haeba mokhanni oa USB o sa kengoa ka nepo, ka kopo ntjhafatsa mokhanni oa USB ka letsoho: fumana "USB_DRIVER" bukeng ea ho kenya software ea software Folder, feela ntjhafatsa mokhanni);
Ka mor'a hore khokahanyo e atlehe, mokhoa oa hona joale oa lenaneo o hokahaneng
mme tatelano e tla bontshwa
3.2 Ho hlophisa chip ea hau
1Khetha mohlala oa chip:
Tobetsa konopo ea toolbar
, 'me u batle mofuta oa chip o tla hlophisoa ka har'a lebokose la puisano la pop-up
bakeng sa ho khetha mohlala oa chip: W25Q32DW. Khetha mofuta oa chip e ts'oanang, mofuta le mofuta oa sephutheloana (ho khetha mofuta o fosahetseng le moetso ho tla baka ho hloleha ha mananeo).
- 6 -
SP20 Series Programmer
Bukana ea Mosebelisi
2Moroalo file:
Tobetsa konopo ea toolbar
ho kenya data file, e ka tšehetsang liforomo tsa Bin le Hex.
3) Tlhophiso ea khetho ea ts'ebetso: Etsa litlhophiso tse lumellanang le leqephe la "Options Options" ha ho hlokahala. Keletso: Chip e se nang letho e tlameha ho hlakoloa.
Ho hlophisa sebaka sa C (Rejistara ea Boemo), o tlameha ho tobetsa konopo ena ho bula khetho ea "Config." ho etsa litlhophiso tse amehang.
4Beha chip:
Phahamisa letsoho la sokete ea ZIF, kenya mola o ka tlase oa sokete ea lenaneo e tsamaellanang le tlase ea ZIF Socket, tobetsa konopo, ebe u kenya chip ka har'a sokete ea lenaneo. Hlokomela hore tataiso ea pin 1 ea chip ha ea lokela ho behoa ka tsela e fosahetseng. Keletso: U ka khona view mokhoa o lumellanang oa sokete ea lenaneo le mokhoa oa ho kenya leqepheng la "chip information".
- 7 -
5 Ts'ebetso ea ho hlophisa: Tobetsa konopo ea thulupa
ho qala lenaneo:
SP20 Series Programmer
Bukana ea Mosebelisi
Ha lenaneo le phethiloe, letšoao la boemo le fetohela ho "OK" ho bontša hore lenaneo le atlehile:
3.3 Bala data ea chip le ho hlophisa chip e ncha
1Latela mehato e karolong ea 3.2 ho khetha mohlala oa chip, kenya sokete le chip hore li baloe;
Malebela:
U ka tseba ka bohona boholo ba li-chips tsa SPI Flash ka konopo ea "Check Model" Lithakhisa tsa chip e senyehileng li hloka ho hloekisoa ho qoba ho kopana hampe;
ka har'a toolbar;
2) Tobetsa konopo ea ho bala
ka har'a toolbar, 'me lebokose la puisano la "Read Options" le tla hlaha;
3) Tobetsa konopo ea "OK", moqapi oa lenaneo o tla bula "Data Buffer" ka mor'a ho bala data ea chip, ebe o tobetsa konopo ea "Save Data" ho boloka boitsebiso bo baloang khomphuteng bakeng sa tšebeliso e latelang;
- 8 -
SP20 Series Programmer
Bukana ea Mosebelisi
4) Tobetsa konopo ea "Save Data" ea "Data Buffer", lebokose la lebokose la Save Data le hlaha, ho boloka sebaka sohle sa polokelo, o ka khetha sebaka sa memori ha ho hlokahala, joalo ka sebaka sa memori sa Flash, boloka file e ka sebelisoa hamorao;
5) Koala "data buffer" 'me u kenye chip e ncha ea mohlala o tšoanang;
6) Tobetsa konopo
ho ngola litaba tse baloang ka har'a chip e ncha.
Keletso: Khetha libaka tsohle tsa mananeo likhethong tsa Setupo, ho seng joalo data ea pramming e kanna ea ba e sa fellang.
master chip e ka sebetsa ka mokhoa o tloaelehileng, empa chip e kopilitsoeng e kanna ea se sebetse ka mokhoa o tloaelehileng;
Ka mor'a ho beha li-parameter tsa lenaneo kapa ho bala ka katleho datha ea chip ea 'mè, u ka e boloka
joalo ka morero file (tobetsa konopo ea lisebelisoa
konopo, kapa tobetsa konopo ea menu: File-> Boloka Project), ebe uena feela
hloka ho kenya morero o bolokiloeng file, 'me ha ho hlokahale hore u sete li-parameter hape e le hore u hlophise e ncha
chip.
3.4 Boemo ba sesupo mokgweng wa USB
Boemo ba sesupo
Boputsoa bo sa fetoheng bo benyang bo botala bo tsitsitseng
Bofubelu bo tsitsitseng
Tlhaloso ea naha
Boemong bo maphathaphathe, moetsi oa lenaneo o etsa mesebetsi e kang ho hlakola, ho etsa mananeo, ho netefatsa, joalo-joalo. Emela hore chip e kenngoe.
Hajoale e maemong a standby, kapa chip ea hajoale e hlophisoa ka katleho Lenaneo la Chip le hlotsoe (o ka sheba lebaka la ho hloleha ho fensetere ea tlhaiso-leseling ea software)
Ha e tšehetse lenaneo la li-chips tse ka holim'a boto ka ho hokahanya terata ho tloha soketeng ea ZIF, ka lebaka la ho kena-kenana le potoloho e ka ntle ho tla lebisa ho hloleheng ha lenaneo, 'me tabeng ea boto ea potoloho e ka ntle e nang le motlakase, e ka boela ea senya thepa ea moqapi, haeba moqapi a senyehile ka lebaka la tšebeliso ena e fosahetseng, e ke ke ea fumana tšebeletso ea tiisetso. Ka kopo sebelisa sokete e tloaelehileng ea lenaneo ho hlophisa chip, Kapa sebelisa sehokelo sa ISP sa sebatli ho hlophisa chip (sheba Khaolo ea 5 Lenaneo ka mokhoa oa ISP)
- 9 -
SP20 Series Programmer
Bukana ea Mosebelisi
Khaolo ea 4 Lenaneo le ikemetseng
SP20F,SP20X,SP20P tšehetso e ikemetseng (ntle le komporo ea hau), e loketseng tlhahiso ea bongata. Ts'ebetso ea mantlha ea ts'ebetso ke e latelang:
Khoasolla data e ikemetseng Hakolla thapo ea USB ebe u hokela ho phepelo ea motlakase ea 5V
Qala mananeo a ikemetseng
4.1 Khoasolla data e ikemetseng
1) Hokela moqapi ho koung ea USB ea komporo ka thapo ea USB, 'me u qale software ea "SFLY FlyPRO II"; 2) Latela mehato e karolong ea 3.2 ho khetha mohlala oa chip, laela data file, 'me u behe mekhoa e hlokahalang ea ts'ebetso; 3) E le ho etsa bonnete ba hore data e ikemetseng e nepahetse, u ka qala ka ho hlophisa lisebelisoa tse 'maloa' me u etse bonnete ba sehlahisoa;
4) Tobetsa konopo
ho boloka morero oa hajoale (Keletso: projeke e bolokiloeng file e ka jarolloa le ho sebelisoa hamorao ho
qoba bothata ba litlhophiso tse pheta-phetoang);
5) Tobetsa konopo
ho jarolla data e ikemetseng, 'me lebokose la puisano la "Download Project" le tla hlaha;
Tlhokomeliso: Ha u etsa lenaneo ka letsoho, khetha "Chip Insert" kapa "KEY Sart" (SP20P feela e tšehetsa KEY start). Ha u sebelisa mochini oa ho etsa li-program, ka kopo khetha "ATE control (mokhoa oa mochini)"
6) Tobetsa OK ho jarolla data e ikemetseng ho memori e hahelletsoeng ka har'a mohlophisi: data e ikemetseng e ke ke ea lahleha ka mor'a hore moetsi oa lenaneo a tima, 'me u ka tsoela pele ho e sebelisa.
nako.
- 10 -
SP20 Series Programmer
Bukana ea Mosebelisi
4.2 Ts'ebetso ea mananeo a ikemetseng
Mokhoa oa matsoho
Mokhoa oa ho khetha le ho beha li-chips ka letsoho. Mehato ea ts'ebetso ea letsoho ka mokhoa o ikemetseng ke e latelang: 1) Khoasolla data e ikemetseng ho latela mokhoa o karolong ea 4.1. Hlokomela hore ha u khoasolla data e ikemetseng, khetha mokhoa oa ho laola ho qala e le "Chip Placement" (SP20P e ka boela ea khetha "Key Start"); 2) Ntša thapo ea USB khomphuteng 'me u e hokele ho adaptara ea matla ea 5V. Ka mor'a hore moetsi oa lenaneo a khannoe, e tla qala ka ho hlahloba lintlha tsa ka hare tse ikemetseng ho netefatsa botšepehi le ho nepahala ha data. Sena se nka metsotsoana e 3-25. Haeba tlhahlobo e fetisitsoe, leseli la sesupo le khantša boputsoa, ho bontša hore moqapi o kene ka mokhoa o ikemetseng oa lenaneo. Haeba tlhahlobo e hlōleha, letšoao le bontša boemo bo bofubelu bo khanyang, bo bontšang hore ha ho na data e ikemetseng e ikemetseng ho moqapi oa lenaneo, mme lenaneo le ikemetseng le ke ke la qalisoa;
Hokela ho adaptara ea matla ea 5V bakeng sa mananeo a Standalone
Tlhokomeliso: Ke SP20P feela e ka bonts'ang boemo ba ts'ebetso ea moqapi ka mokhoa o hlakileng haholoanyane skrineng sa OLED, joalo ka ha ho bonts'itsoe setšoantšong se kaholimo, e khothaletsa ho emela hore chip e kenngoe. 3) Beha chip hore e hlophisoe holim'a sokete ea ZIF, leseli le fetoha ho tloha ho boputsoa bo khanyang ho ea ho boputsoa bo tsitsitseng, e leng se bontšang hore moqapi oa lenaneo o hlokometse chip mme o ntse a etsa lenaneo; 4) Ha leseli la sesupo le fetoha botala bo tsitsitseng, ho bolela hore lenaneo la chip le phethiloe mme lenaneo le atlehile. Haeba leseli le fetoha le khubelu, ho bolela hore lenaneo la hona joale la chip le hlōlehile. Ka nako e ts'oanang, moqapi oa lenaneo o emetse hore chip ea hona joale e tlosoe soketeng ea ZIF. Haeba ts'ebetso ea buzzer prompt e buletsoe, moetsi oa lenaneo o tla lla ha lenaneo le phethiloe; 5) Ntša chip ebe u e kenya ka har'a chip e latelang, pheta mohato ona ho fihlela lenaneo le phethoa.
- 11 -
SP20 Series Programmer
Bukana ea Mosebelisi
Mokhoa oa ho laola o iketsang (taolo ka sebopeho sa ATE)
SP20X/SP20P e na le ISP/ATE multiplexing segokanyimmediamentsi sa sebolokigolo sa ISP/ATE, se ka sebediswang ka metjhini e itirisang ya mananeo le disebediswa tse ding tsa othomathike ho phethahatsa lenaneo la othomathike (ho ikgethela ka bohona le ho beha chips, ho iketsetsa mananeo). Tsoela pele ka tsela e latelang: 1) Khoasolla data e ikemetseng ho latela mokhoa o karolong ea 4.1. Hlokomela hore ha u khoasolla data e ikemetseng, khetha mokhoa oa ho laola ho qala e le "taolo ea ATE (mokhoa oa mochini)". Ka mokhoa ona oa ho sebetsa, sebopeho sa ATE sa moqapi se ka fana ka letšoao la letšoao la START/OK/NG/BUSY; 2) Etella pele mohala oa pin pin ho tloha soketeng ea ZIF ho ea mochine oa lenaneo; 3) Kopanya mohala oa ho laola mochine ho "ISP / ATE interface" ea "ISP / ATE", li-interface pins li hlalosoa ka tsela e latelang;
ISP/ATE segokanyimmediamentsi sa sebolokigolo 4) Qala lenaneo.
3–BUSY 5–OK 9–NG 7–START 2–VCC 4/6/8/10–GND
4.3 Boemo ba pontšo ka mokhoa o ikemetseng
Boemo ba sesupo
Tlhaloso ea naha (mokhoa oa matsoho)
Bofubedu bo benyang
Sebapali ha sea khoasolla data e ikemetseng
Botala bo boputsoa bo benyang
Khubedu
Emela ho beoa ha chip Thepa ea ho etsa chip Lenaneo la chip le phethetsoe 'me lenaneo le atlehile (E emetse ho tlosoa ha chip) Lenaneo la chip le hlōlehile (E emetse ho tlosoa ha chip)
Tlhaloso ea naha (mokhoa oa ho laola othomathike, SP20X, SP20P feela)
Sebapali ha sea khoasolla data e ikemetseng Lenaneo la chip Lenaneo la chip le phethetsoe mme lenaneo le atlehile
Lenaneo la chip le hlolehile
- 12 -
SP20 Series Programmer
Bukana ea Mosebelisi
Khaolo ea 5 Lenaneo ka mokhoa oa ISP
Lebitso le felletseng la ISP ke In System Program. Ka mokhoa oa lenaneo la ISP, o hloka feela ho hokela mela e 'maloa ea matšoao ho lithakhisa tse amehang tsa onboard chip ho hlokomela ts'ebetso ea ho bala le ho ngola ea chip, e ka qobang bothata ba ho senya chip. SP20 letoto le na le 10P ISP/ATE multiplexing segokanyimmediamentsi sa sebolokigolo, lichifi boto ea potoloho li ka hlophisoa ka sebopeho sena.
5.1 Kgetha ISP programming mode
Baetsi ba li-program tsa SP20 ba ka tšehetsa lenaneo la ISP la lichifi tse ling. Tobetsa konopo ea "chip model" ho software ho batla mofuta oa chip o lokelang ho hlophisoa, ebe u khetha "ISP mode programming in the "Adapter/Programming Mode" kholomo "(Haeba ho se na ISP mode programming ka mokhoa o batlisisitsoeng oa chip programming, ho bolela hore chip e ka hlophisoa feela ka sokete ea lenaneo). Sheba setšoantšo se ka tlase:
5.2 Tlhaloso ea sebopeho sa ISP
Tlhaloso ea ISP interface ea SP20 series programmer ke e latelang:
97531 10 8 6 4 2
ISP/ATE interface
Mohala oa ISP oa mebala oa 10P o ajoa ka mokhoa o sa reroang ho hokahanya sebopeho sa ISP le chip ea boto e shebiloeng. Polaka ea 5x2P e hokahane le sebopeho sa ISP sa moetsi oa lenaneo, 'me pheletso e 'ngoe e hokahane le phini e tsamaisanang ea chip e hlakisitsoeng ka theminale ea hlooho ea DuPont.
Hokela chip e shebiloeng ka hlooho ea DuPont
Kamano e tsamaellanang lipakeng tsa 'mala oa thapo ea ISP le lithakhisa tsa ISP interface e tjena:
Mmala
Brown Red Orange (kapa pinki) Yellow Green
E tsamaellanang le ISP interface pins
1 2 3 4 5
Mmala
Blue Purple Gray White Black
E tsamaellanang le ISP interface pins
6 7 8 9 10
- 13 -
SP20 Series Programmer
Bukana ea Mosebelisi
5.3 Hokela chip e shebiloeng
Tobetsa "chip information" leqepheng la ka sehloohong segokanyimmediamentsi sa sebolokigolo ho view Setšoantšo sa moralo oa khokahano oa sebopeho sa ISP le chip ea sepheo. Sheba setšoantšo se ka tlase:
Li-chips tse fapaneng li na le mekhoa e fapaneng ea khokahano. Ka kopo, tobetsa leqephe la "chip information" ho software ho view mekhoa e qaqileng ea khokahanyo ea chip.
5.4 Kgetha mokgwa wa phepelo ya matla wa ISP
Nakong ea lenaneo la ISP, chip e lebisitsoeng e na le likhetho tse peli tsa matla: e tsamaisoang ke moqapi le ho iketsetsa matla ke boto e reretsoeng. Iketsetse hore na u hlahlobe "Fana ka matla a ho shebisa boto" leqepheng la "Project Settings" ea software:
Sheba "Fana ka matla bakeng sa boto e shebiloeng", moetsi oa lenaneo o tla fana ka matla bakeng sa chip ea boto e shebiloeng, ka kopo khetha matla a phepelo ea motlakase.tage ho ea ka chip's rated working voltage. Lenaneo le ka fana ka mojaro o mongata oa 250mA. Haeba mojaro oa hona joale o le moholo haholo, moetsi oa lenaneo o tla fana ka ts'ireletso ea hona joale e fetelletseng. Ka kopo, hlakola "Fana ka matla bakeng sa boto e shebiloeng" 'me u fetohele ho "SP20 programmer" e ka tšehetsa 1.65 V ~ 5.5V target boardtage range, ISP signal driving voltage tla ikamahanya le maemo a VCC ea boto e tobanengtagle).
5.5 Ts'ebetso ea ho etsa mananeo
Sheba hore na khokahano ea hardware le litlhophiso tsa software li nepahetse, ebe u tobetsa konopo ea ISP programming ea chip.
ho phethela
Lenaneo la ISP le batla le rarahane, mme o tlameha ho tloaelana le potoloho haholo; Lithapo tse hokahanyang li ka hlahisa tšitiso le tšitiso ea lipotoloho tse ling ho
boto ea potoloho, e ka lebisang ho hloleheng ha mananeo a ISP. Ka kopo, tlosa chip
le ho sebelisa sokete e tloaelehileng ea chip ho etsa lenaneo;
- 14 -
SP20 Series Programmer
Bukana ea Mosebelisi
Khaolo ea 6 Programming ka Multi-machine Mode
Lenaneo la software le ts'ehetsa ts'ebetso e ts'oanang ea li-program tsa 8 tse hokahaneng le komporo e le 'ngoe (tlhahiso e kholo kapa ho jarolla data e ikemetseng).
6.1 Khokahano ea lisebelisoa tsa software
1) Sebelisa USB HUB ho hokela li-program tse ngata koung ea USB ea komporo (Hub ea USB e tlameha ho ba le adaptara ea motlakase e kantle, 'me ho hlokeha matla a kantle). Hlokomela hore ka mokhoa oa mechine e mengata, ke baetsi ba mananeo a mofuta o le mong feela ba ka sebelisoang hammoho, 'me mefuta e fapaneng e ke ke ea tsoakoa.
2) Qala software ea SP20 programmer, software e tla hokela ka bo eona ho bohle ba hokahaneng ba mananeo le
kenya mokhoa oa mechine e mengata. Haeba software e se e ntse e sebetsa, u ka tobetsa Menu Programmer Reconnect, 'me software e tla hlahisa lebokose la lebokose la "Connect to the programmer":
- 15 -
SP20 Series Programmer
Bukana ea Mosebelisi
Khetha moetsi oa lenaneo hore a hokahane ebe o tobetsa OK. Kamora hore khokahano e atlehe, software e kena ka har'a mochini oa mochini o mongata, 'me sebopeho se tjena:
6.2 Ts'ebetso ea ho etsa mananeo
1) Ts'ebetso ea lenaneo e tšoana le ts'ebetso ea lenaneo karolong ea 3.2: khetha mojaro oa mohlala oa chip file seta likhetho tsa ts'ebetso kenya sokete ea mananeo;
2) Tobetsa konopo
konopo (Hlokomela: SP20P e ka khetha mekhoa e 'meli ea mananeo a mangata: "Chip
Insert” le “Key Start” Ho example, khetha "Chip Insert" mode), 'me moqapi o tla emela chip
ho behoa;
3) Kenya li-chips tse hlophisitsoeng ka har'a sokete ea lenaneo ka bonngoe, 'me moqapi o tla qala ka bohona
lenaneo ka mor'a ho lemoha hore li-chips li kentsoe. Moetsi e mong le e mong o sebetsa a le mong, a etsa lenaneo ka botlalo
Asynchronous mode, ha ho na tlhoko ea ho emela khokahano. The segokanyimmediamentsi sa sebolokigolo mananeo ke ka tsela e latelang;
4) Khetha 'me u behe li-chip ho latela tlhaloso ea boemo ba sesupo ho Karolo ea 3.4 kapa litlhahiso tse skrineng ho phethela bongata bohle ba lenaneo la chip. Malebela: SP20F,SP20X,SP20P tšehetso ea mananeo a ikemetseng. U ka sebelisa boema-kepe ba USB bo teng komporong ho hokela baetsi ba mananeo a le mong kapa ho feta ho khoasolla data e ikemetseng, ebe u sebelisa mokhoa o ikemetseng oa ho etsa mananeo a mangata. Ha e bapisoa le mokhoa oa USB, e bonolo ebile e sebetsa hantle. SP20B ha e tšehetse e ikemetseng 'me e ka hokeloa feela komporong bakeng sa mananeo a mangata.
- 16 -
SP20 Series Programmer
Bukana ea Mosebelisi
Sehlomathiso 1 FAQ
Na moetsi oa lenaneo a ka tšehetsa img files?
Lenaneo la software le tšehetsa binary le hexadecimal file lifomate tsa khouto. Sehlongoa se tloaelehileng sa binary files ke *.bin, le suffix e tloaelehileng ea hexadecimal files ke *.hex;
img ke feela a file suffix, mme ha e emele file sebopeho sa khouto. Ka tloaelo (ka holimo ho 90%) joalo files are binary encoded. Feela laela ka ho toba ka software, software tla ka tsela e iketsang hlokomela hore na file ke binary code, 'me e jare ka mokhoa o tsebahalang;
Ho etsa bonnete ba ho nepahala ha file loading, re khothaletsa hore basebelisi ba hlahlobe buffer checksum le file Checksum le moenjiniere (kapa file bafani ba khoutu / bareki) kamora ho kenya joalo files. (Lintlha tsena li tla hlahisoa botlaaseng ba fensetere e kholo ea software ea mongoli.)
Ke mabaka afe a tloaelehileng a ho hloleha ha mananeo (ho kenyeletsoa ho hloleha ho hlakola / ho hloleha ha lenaneo / ho hloleha ha netefatso / phoso ea ID, joalo-joalo)?
Moetsi oa chip / mohlala o khethiloeng ho software ha o lumellane le chip ea sebele; The chip e behoa ka tsela e fosahetseng, kapa sokete ea lenaneo e kenngoa sebakeng se fosahetseng.
Ka kopo sheba mokhoa o nepahetseng oa ho beha ka fensetere ea "Chip Information" ea software; Khokahano e mpe pakeng tsa li-chip pins le socket ea lenaneo; Hokela li-chips tse rekisitsoeng libotong tse ling tsa potoloho ka lithapo kapa likotoana tsa lenaneo la IC, tse ka bang teng.
baka ho hloleha ha mananeo ka baka la tshitiso ya potoloho. Ka kopo, khutlisetsa li-chips ka har'a sokete ea mananeo bakeng sa ho etsa mananeo; The chip e ka 'na ea senyeha, e nkeloa sebaka ke chip e ncha bakeng sa tlhahlobo.
Litlhokomelo bakeng sa lenaneo la ISP ke life?
Lenaneo la ISP le batla le rarahane ho elelloa, le loketse batho ba nang le tsebo e itseng ea setsebi, o hloka ho tseba ho bala schematic ea potoloho le ho tseba setšoantšo sa potoloho sa boto e shebiloeng. Software e tšehetsa lenaneo la ISP la FLASH le EEPROM tse sebelisoang ka tloaelo, pele ho tsohle, o hloka ho khetha mokhoa oa lenaneo la ISP oa chip ea hona joale ho software. Ha u sebelisa mokhoa oa ho etsa lenaneo la ISP, u lokela ho ela hloko lintlha tse latelang: Netefatsa hore molaoli oa sehlooho (mohlala, MCU/CPU) o hoketsoeng ho sepheo sa Flash ha a fihle moo a batlang.
chip, le likou tsohle tse hokahaneng tsa IO tsa molaoli oa mian li lokela ho beoa ho hanyetsa haholo (o ka leka ho beha molaoli oa mian ho RESET boemo). Likou tse ling tsa taolo ea IO tsa chip e hlophisitsoeng li tlameha ho fihlela maemo a tloaelehileng a ts'ebetso ea chip, mohlalaample: Lithako tsa HOLD le WP tsa SPI FLASH li tlameha ho huleloa ho ea holimo. SDA le SCL tsa I2C EEPROM li tlameha ho ba le lihanyetsi tse hulang, 'me WP pin e tlameha ho huleloa ho ea boemong bo tlaase. Boloka lithapo tse hokelang li le khutšoane kamoo ho ka khonehang. Li-chips tse ling li hloleha ho sebetsa ka thapo ea ISP e kenyellelitsoeng Beha molumo o nepahetsengtage / clock parameters bakeng sa lenaneo la ISP likhethong tsa Setup: Ho ka sebelisoa e le 'ngoe feela ea likhetho tse peli: ho matlafatsa boto ea sepheo ka boeona kapa ho matlafatsa boto e lebisitsoeng ho tswa ho moqapi oa lenaneo. Ho sa tsotellehe hore na ho sebelisoa mokhoa ofe oa phepelo ea motlakase, VCC e tlameha ho hokelloa. Mokhoa oa ISP o angoa ke potoloho ea potoloho ea boto e shebiloeng kapa lithapo tse hokahanyang, ka hona ha ho tiisetsoe hore lichifi tsohle li ka chesoa ka katleho. Haeba khokahanyo le litlhophiso li hlahlojoa khafetsa 'me li ntse li sa khone ho etsoa ka katleho, ho kgothaletswa ho tlosa chip le ho e hlophisa ka Socket e tloaelehileng ea chip. Tlhahisong ea bongata, leka ho sebelisa lenaneo la pele ebe mokhoa oa SMT.
Hobaneng ha 24 series chip e sena mosebetsi oa ho hlakola?
The chip e itšetlehile ka theknoloji ea EEPROM, data ea chip e ka ngoloa hape ka ho toba ntle le ho hlakola pele, kahoo ha ho na ts'ebetso ea ho hlakola e fumanehang;
Haeba o hloka ho hlakola data ea chip, ka kopo ngola lintlha tsa FFH ka kotloloho ho chip.
- 17 -
SP20 Series Programmer
Bukana ea Mosebelisi
Joang ho ntlafatsa software ea software le firmware?
Tobetsa lenane la mananeo a mananeo: Thusa-Sheba bakeng sa lintlafatso. Haeba ho na le ntlafatso, wizate ea ntlafatso e tla hlaha. Ka kopo latela litlhahiso tsa ho khoasolla sephutheloana sa ntlafatso le ho se kenya;
Kenya setsi sa ho jarolla sa semmuso sa Sfly websebaka (http://www.sflytech.com), khoasolla software ea morao-rao ea li-program ebe u e kenya;
U hloka feela ho ntlafatsa software ea software, ha ho hlokahale hore u ntlafatse firmware ea lenaneo.
Ke lokela ho etsa eng haeba ho se na mohlala oa chip ho software ea software?
Qala ka ho ntlafatsa software ea moetsi ho ea mofuta oa morao-rao; Haeba ho se na mofuta oa chip o lokelang ho hlophisoa mofuta oa morao-rao oa software, ka kopo romella lengolo-tsoibila ho
etsa kopo ya tlatsetso. Hlahisa lintlha tse latelang: mohlala oa moqapi, mofuta oa chip o tla eketsoa, mohlala o qaqileng oa chip, sephutheloana (khopotso: Baetsi ba li-program tsa SP20 ba ka tšehetsa SPI NOR FLASH, EEPROM feela, mefuta e meng ea li-chips e ke ke ea tšehetsoa).
- 18 -
SP20 Series Programmer
Bukana ea Mosebelisi
Sehlomathiso sa 2 Boitlhotlhollo
Shenzhen Sfly Technology Co., Ltd. e etsa sohle se matleng a eona ho netefatsa ho nepahala ha sehlahisoa le software le thepa e amanang le eona. Bakeng sa lihlahisoa tse ka khonehang (ho kenyeletsoa lisebelisoa le lisebelisoa tse amanang) le liphoso le liphoso, k'hamphani e tla etsa sohle se matleng a eona ho rarolla bothata ka bokhoni ba eona ba khoebo le botekgeniki. Khampani ha e ikarabelle bakeng sa mefuta eohle ea tšenyo ea tšohanyetso, e ke keng ea qojoa, e tobileng, e sa tobang, e khethehileng, e atolositsoeng kapa ea kotlo e bakoang ke tšebeliso kapa thekiso ea sehlahisoa sena, ho kenyeletsoa, empa ho sa felle feela ka tahlehelo ea phaello, kamohelo, ho fumaneha, ho sitisoa ha khoebo, tahlehelo ea data, joalo-joalo, e ke ke ea ikarabella bakeng sa ts'enyehelo e tobileng, e sa tobang, ea tšohanyetso, e khethehileng, e tsoang ho karolo ea boraro.
- 19 -
Litokomane / Lisebelisoa
 |
SFLY SP20 Series High Speed programmer [pdf] Bukana ea Mosebelisi SP20B, SP20F, SP20X, SP20P, SP20 Series High Speed programmer, SP20 Series, High Speed programmer, Speed programmer, Programmer |
