SP20 Series High Speed Programmer
“
Zvinodiwa:
- Zita reChigadzirwa: SP20 Series Programmer
- Mugadziri: SHENZHEN SFLY TECHNOLOGY CO.LTD.
- Zuva Rekuburitswa: Chivabvu 7, 2024
- Kudzokorora: A5
- Inotsigira: SPI NOR FLASH, I2C, MicroWire EEPROMs
- Kukurukurirana Interface: USB Type-C
- Simba rekupa: USB modhi - hapana ekunze magetsi anodiwa
Mirayiridzo Yekushandisa Chigadzirwa:
Chitsauko 3: Kukurumidza Kushandisa
3.1 Basa rekugadzirira:
Ita shuwa kuti programmer yakabatana pakombuta kuburikidza ne USB
Type-C interface. Hapana magetsi ekunze anodiwa mu USB
mode.
3.2 Kugadzira chip yako:
Tevedza mirairo yesoftware yakapihwa kuronga chip yako
uchishandisa SP20 Series Programmer.
3.3 Verenga chip data uye kuronga chip nyowani:
Iwe unogona kuverenga iripo chip data uye kuronga chip nyowani kuburikidza
uchitevera matanho anotsanangurwa mubhuku rekushandisa.
3.4 Chiratidzo chimiro mu USB modhi:
Tarisa kune zviratidzi mwenje pane programmer kuti unzwisise
chimiro chemudziyo mu USB mode.
Chitsauko 4: Standalone Programming
4.1 Dhawunirodha data yakazvimirira:
Dhawunirodha iyo inodiwa data kune yakamira programming mu
yakavakirwa-mukati mememory chip yemugadziri.
4.2 Standalone programming operation:
Ita mashandiro akazvimirira ega sekutsanangurwa kwazvino mu
manual. Izvi zvinosanganisira manyorero maitiro uye otomatiki control mode kuburikidza
ATE interface.
4.3 Chimiro chechiratidzo mune yakamira modhi:
Nzwisisa chimiro chechiratidzo paunenge uchishanda mune yakamira
maitiro ekugadzirisa zvirongwa.
Chitsauko 5: Kuronga muISP modhi
Tarisa kubhuku rekushandisa kuti uwane mirairo yakazara pamusoro
chirongwa mu ISP mode.
Chitsauko 6: Chirongwa muMulti-muchina Mode
Dzidza nezve Hardware yekubatanidza uye zvirongwa zvekugadzira zve
multi-machine mode programming.
FAQ:
Q: Ndeapi marudzi emamemory chips anotsigirwa neSP20
Series Programmer?
A: Iyo programmer inotsigira SPI NOR FLASH, I2C,
MicroWire, uye mamwe maEEPROM kubva kune vakasiyana vagadziri ve
high-speed mass production programming.
"`
+
SP20B/SP20F/SP20X/SP20P
Programmer User Manual
Zuva Rekuburitswa: Chivabvu 7, 2024 Revision A5
SHENZHEN SFLY TECHNOLOGY CO.LTD.
ZVIRI MUKATI
SP20 Series Programmer
User Manual
Chitsauko1 Nhanganyaya
1.1 Performance Characteristics ————————————————————————————— 3 1.2 SP20 series programmer parameter table ——————————————————————— 4
Chapter2 Programmer Hardware
2.1 Chigadzirwa Pamusoroview ————————————————————————————————— 5 2.2 Product Add-ons ——————————————————————————————— 5
Chitsauko 3 Kurumidza Kushandisa
3.1 Kugadzirira basa ————————————————————————————————————————————————————————————————————————————– 6 3.2 ———————————————————————-6 3.3 Indicator status in USB mode——————————————————————————————
Chitsauko 4 Standalone Programming
4.1 Dhaunirodha data yakazvimirira —————————————————————————————10 4.2 Standalone programming operation —————————————————————————-
Manual mode————————————————————————————————————-12 Automatic control mode (control via ATE interface) ———————————————————12 4.3 Indicator status in standalone mode—————————————————————————————————————
Chitsauko 5 Kuronga muISP modhi
5.1 Sarudza ISP programming modhi ———————————————————————————————————————————————————————————————————————————————————————————————————13
Chitsauko 6 Kuronga muMulti-muchina Mode
6.1 Hardware connection of programmer —————————————————————————15 6.2 Programming operation —————————————————————————————16
Appendikisi 1
FAQ —————————————————————————————————————————- 17
Appendikisi 2
Disclaimer ———————————————————————————————————————– 19
Appendikisi 3
Revision History ——————————————————————————————————————20
- 2 -
SP20 Series Programmer
User Manual
Chitsauko 1 Nhanganyaya
SP20 nhevedzano (SP20B/SP20F/ SP20X/SP20P) vagadziri vezvirongwa ndivo vachangoburwa vanomhanyisa madhizaini ekugadzira mapurogiramu eSPI FLASH yakatangwa neShenzhen SFLY Technology. Iyo inotsigira zvizere iyo yakakwirira-kumhanya hurongwa hweSPI NOR FLASH, I2C / MicroWire uye mamwe maEEPROM kubva kune vanogadzira epamba nekunze.
1.1 Maitiro Ekuita
Hardware features
USB Type-C communication interface, no need for external power supply when used in USB mode; Support USB and standalone mode high-speed mass production programming; The built-in large-capacity memory chip saves the engineering data for standalone programming, and multiple
CRC data verification ensures that the programming data is absolutely accurate; Replaceable 28-pin ZIF socket, which can be supported by conventional universal programming bases; OLED display, visually display the current operating information of the programmer; RGB three-color LED indicates the working status, and the buzzer can prompt the success and failure of the
programming; Support poor pin contact detection, effectively improve programming reliability; Support ISP mode programming, which can support on-board programming of some chips; Multiple programming startup methods: button startup, chip placement (intelligent detection chip placement
and removal, automatic startup programming), ATE control (independent ATE control interface, providing accurate and reliable programming machine control signals such as BUSY, OK, NG, START, extensively support automatic programming equipment of various manufacturers); Short circuit / overcurrent protection function can effectively protect the programmer or chip from accidental damage; Programmable voltage design, adjustable range from 1.7V to 5.0V, can support 1.8V/2.5V/3V/3.3V/5V chips; Provide equipment self-check function; Small size (size: 108x76x21mm), simultaneous programming of multiple machines only takes up a very small work surface;
Software features
Support Win7/Win8/Win10/Win11; Support switching between Chinese and English; Support software upgrade to add new devices; Support project file manejimendi (project file inochengetedza ese maparamita ehurongwa, kusanganisira: chip modhi, data
file, programming settings, etc.); Support the reading and writing of additional storage area (OTP area) and configuration area (status register,
etc.) of the chip; Support automatic recognition of 25 series SPI FLASH; Automatic serial number function (can be used to generate product unique serial number, MAC address,
Bluetooth ID, etc.,); Support multi-programmer mode connection: one computer can be connected with 8 SP20 series
programmers for simultaneous programming,The automatic serial number function is active in multiprogrammer mode; Support log file saving;
Cherechedza: Mabasa ari pamusoro anoenderana nemhando yechigadzirwa. Kuti uwane ruzivo, ndapota tarisa kune chigadzirwa parameter tafura muchikamu 1.2
- 3 -
SP20 Series Programmer
User Manual
1.2 SP20 akatevedzana programmer parameter tafura
Product parameter
SP20P SP20X SP20F SP20B
Chigadzirwa Chitarisiko
Inotsigirwa chip voltage range
1.8-5V
1.8-5V
1.8-5V
1.8-5V
Yakanyanya ndangariro yemachipi anotsigirwa (Cherechedza1)
Tsigira chip series (interface type)
( I2C EEPROM Microwire EEPROM SPI Flash)
Kubatana kwakawanda
(Kombiyuta imwe inogona kubatanidza 8 programmers)
Kugadzirwa kwakawanda ne USB
(Otomati ona chip pinza uye bvisa, auto programmer)
Automatic serial NO.
(Serial nhamba kuronga)
RGB LEDs basa chiratidzo
Buzzer kukurumidza
Standalone programming
(programming isina komputa, yakakodzera kugadzirwa kwakawanda)
Tsigira otomatiki michina
(Dzora iyo otomatiki michina neATE)
ISP programming
(Tsigira mamwe mamodheru)
Kushandisa usb modhi mune yakamira-yega modhi
Bhatani rekutanga rekugadzirisa
OLED kuratidza
Programming speed
(Programming + verification) Yakazara data
GD25Q16(16Mb) W25Q64JV(64Mb) W25Q128FV(128Mb)
1Gb
Y
Y
YYYY
YYYYY 6s 25s 47s
1Gb
Y
Y
YYYY
YYNNN 6s 25s 47s
1Gb
Y
Y
YYYY
NYNNN 6s 25s 47s
1Gb
Y
Y
YYNN
NYNNN 7s 28s 52s
“Y” zvinoreva kuti ine kana inotsigira basa racho, “N” zvinoreva kuti haina kana kuti haitsigire basa racho
Cherechedza 1 Inotsigira kusvika ku1Gb muusb mode uye 512Mb mune yakamira mode.
- 4 -
SP20 Series Programmer
User Manual
Chitsauko 2 Programmer Hardware
2.1 Chigadzirwa Pamusoroview
Item
Zita
28P ZIF socket Matatu mavara chiratidzo
OLED kuratidza Programming kutanga bhatani
USB interface
ISP/ATE multiplexing interface
Enzanisirai
Isa DIP yakarongedzwa chip, programming socket (Cherechedza: Haitsigire hurongwa hwepa-bhodhi machipisi nekubatanidza waya kubva pachisoketi cheZIF.)
Bhuruu: BUSY; Green: OK (zvakabudirira); Tsvuku: FAIL
Ratidza chimiro chekushanda uye zvabuda (SP20P chete ine chikamu ichi) Tanga kuronga nekudzvanya bhatani (SP20P chete ine chikamu ichi)
USB Type-C interface
Provide programming machine control signals (BUSY, OK, NG, START) (only SP20P and SP20X have this function) ISP programming for chips soldered on boards
2.2 Zvigadzirwa zvekuwedzera
Type-C data tambo
ISP cable
5V/1A gadziriso yemagetsi
Chinyorwa chemirayiridzo
Rudzi / kutaridzika kwezvishongedzo zvemabheji akasiyana anogona kunge akasiyana, ndapota tarisa kune chaiyo chigadzirwa;
SP20B does not include a power adapter, just use the USB port for power supply; The standard configuration of the programmer does not include a programming socket, please
sarudza maererano nezvido zvako;
- 5 -
SP20 Series Programmer
User Manual
Chitsauko 3 Kurumidza Kushandisa
Chitsauko ichi chinotora chidimbu cheSOIC8 (208mil) chakaiswa SPI FLASH chip W25Q32DW se ex.ample kusuma iyo SP20P programmer nzira yekuronga chip mu USB mode. Iyo yakajairwa hurongwa inosanganisira anotevera 5 matanho:
Software uye hardware kugadzirira programming
Sarudza chip modhi
Load file Operation sarudzo marongero
3.1 Kugadzirira basa
1) Isa "SFLY FlyPRO II" yakatevedzana programmer software (inosanganisira USB mutyairi, iyo USB mutyairi anozoiswa nekusarudzika kana uchiisa software), tsigira Win7/Win8/Win10/Win11, software yacho kurodha. URL: http://www.sflytech.com; 2) Batanidza programmer kuchiteshi che USB chekombuta netambo ye USB, uye mwenje wegirini wemugadziri uchange uripo kana kubatana kwakajairika;
Batanidza kune komputa USB port
3) Tanga iyo programmer software "SFLY FlyPRO II", software yacho inozobatana neiyo programmer, uye hwindo rekurudyi resoftware rinoratidza iyo programmer modhi uye chigadzirwa serial nhamba. Kana kubatana kukatadza: ndapota tarisa kana tambo ye USB yakavharirwa mukati; tarisa kana mutyairi we USB akanyatso kuisirwa mudhiraivha yekombuta (kana mutyairi we USB asina kuisirwa nenzira kwayo, ndapota gadzirisa nemaoko mutyairi we USB: tsvaga iyo "USB_DRIVER" mune programmer software yekuisa dhairekitori Folder, ingovandudza mutyairi);
Mushure mekunge kubatana kwabudirira, iyo parizvino yakabatana programmer modhi
uye kutevedzana kucharatidzwa
3.2 Kugadzira chip yako
1Sarudza iyo chip modhi:
Dzvanya bhatani rebhatani
, uye tsvaga iyo chip modhi kuti igadziriswe mupop-up dialog box
yekusarudza chip modhi: W25Q32DW. Sarudza inoenderana chip brand, modhi uye pasuru mhando (kusarudza isiriyo mhando uye modhi zvinokonzeresa kutadza kwechirongwa).
- 6 -
SP20 Series Programmer
User Manual
2Mutoro file:
Dzvanya bhatani rebhatani
kurodha data file, iyo inogona kutsigira Bin uye Hex mafomati.
3) Operation sarudzo setup: Ita zvigadziriso zvinoenderana pane "Operation Options" peji sezvinodiwa. Zano: Chipi chisina chinhu chinofanira kudzimwa.
Kuronga nzvimbo yeC (Status Register), unofanira kubaya bhatani iri kuti uvhure "Config. sarudzo" kuti uite zvigadziriso zvakakodzera.
4Isa chip:
Simudza mubato weZIF socket, isa mutsara wepasi wesoketi yepurogiramu yakabatana nechepazasi peZIF Socket, dzvanya pasi mubato, wobva waisa chip muchirongwa chechirongwa. Ziva kuti kutungamira kwepini 1 yechip hakufanirwe kuiswa munzira isiriyo. Zano: Unogona view iyo inoenderana programming socket modhi uye nzira yekuisa pane "chip ruzivo" peji.
- 7 -
5Programming operation: Dzvanya bhatani returusi
kutanga programming:
SP20 Series Programmer
User Manual
Kana chirongwa chapera, chiratidzo chechimiro chinoshanduka kuita "OK" kuratidza kuti chirongwa chabudirira:
3.3 Verenga chip data uye kuronga chip chitsva
1Tevedza nhanho dziri muchikamu 3.2 kusarudza chip modhi, isa socket uye chip kuti iverengerwe;
Mazano:
You can automatically identify most SPI Flash chips through the “Check Model” button The pins of the desoldered chip need to be cleaned up to avoid poor contact;
mutoolbar;
2) Dzvanya bhatani rekuverenga
mubhara rekushandisa, uye bhokisi re "Verenga Sarudzo" richabuda;
3) Dzvanya bhatani rekuti "OK", mugadziri anozovhura otomatiki "Data Buffer" mushure mekuverenga chip data, uye baya bhatani re "Save Data" kuchengetedza data rakaverengwa pakombuta kuti rizoshandiswa;
- 8 -
SP20 Series Programmer
User Manual
4) Dzvanya bhatani re "Chengetedza Dhata" re "Data Buffer", iyo Save Data dialog box inobuda, iyo yakasarudzika chengetedza nzvimbo yese yekuchengetedza, unogona kusarudza nzvimbo yekurangarira sezvinodiwa, senge main memory area Flash, chengetedza file inogona kushandiswa gare gare;
5) Vhara iyo "data buffer" uye isa mune chip nyowani yemhando imwechete;
6) Dzvanya bhatani
kunyora zvinyorwa zvekuverenga muchip chip chitsva.
Tip: Select all programming areas in the Setup options, otherwise the pramming data may be incomplete and the
master chip inogona kushanda zvakajairika, asi iyo chip yakakopwa inogona kusashanda zvakajairika;
Mushure mekugadzirisa zvirongwa zvekugadzirisa kana kubudirira kuverenga data yeamai chip, unogona kuichengeta
sechirongwa file (baya toolbar
bhatani, kana kudzvanya bhatani remenyu: File-> Sevha Project), uye ipapo iwe chete
inoda kurodha purojekiti yakachengetwa file, uye haufanire kuseta zvakare ma parameter kuti ugadzirise itsva
chip.
3.4 Chiratidzo chimiro mu USB mode
Chimiro chechiratidzo
Yakatsiga yebhuruu Inopenya bhuruu Yakatsiga yegirini
Yakatsiga mutsvuku
Tsananguro yenyika
Nyika yakabatikana, mugadziri wepurogiramu ari kuita mabasa akadai sekudzima, kuronga, kuongorora, nezvimwe. Mirira kuti chip ipiswe.
Parizvino mune yekumira modhi, kana yazvino chip yakanyatso kurongwa Chip programming yakundikana (unogona kutarisa chikonzero chekutadza muhwindo reruzivo rwesoftware)
Haitsigire hurongwa hwe-on-board machipisi nekubatanidza waya kubva kuZIF socket, nekuda kwekukanganiswa kwedunhu rekunze kuchaita kuti kukundikana kwechirongwa, uye kana iri yekunze redunhu bhodhi nemagetsi, inogona zvakare kukuvadza kune Hardware yemugadziri, kana iyo programmer yakakuvadzwa nekuda kwekushandiswa kusiri iko, haizowana sevhisi yewaranti. Ndapota shandisa yakajairwa programming socket kuronga chip, Kana shandisa ISP interface yemugadziri kuprogrammer the on-board chip (ona Chitsauko 5 Chirongwa muISP mode)
- 9 -
SP20 Series Programmer
User Manual
Chitsauko 4 Standalone Programming
SP20F, SP20X, SP20P inotsigira yakamira (isina komputa) hurongwa, inokodzera kugadzirwa kwakawanda. The basic operation process ndeiyi inotevera:
Dhawunirodha yakamira data Bvisa tambo ye USB uye ubatanidze kune 5V magetsi
Tanga standalone programming
4.1 Dhawunirodha yakamira data
1) Batanidza programmer pakombuta USB port ne USB tambo, uye tanga iyo "SFLY FlyPRO II" software; 2) Tevedza matanho ari muchikamu 3.2 kusarudza iyo chip modhi, takura iyo data file, uye isa sarudzo dzinodiwa dzekushanda; 3) Kuti uone kuti iyo yakamira data ndeyechokwadi, unogona kutanga wagadzira mashoma machipi uye kuita iyo chaiyo verification yechigadzirwa;
4) Dzvanya bhatani
kuchengetedza purojekiti iripo (Zano: iro rakachengetwa purojekiti file inogona kuiswa uye kushandiswa gare gare
dzivisa dambudziko rezvirongwa zvinodzokororwa);
5) Dzvanya bhatani
kudhawunirodha data yakamira, uye iyo "Download Project" dialog box ichabuda;
Cherechedza: Paunenge uchigadzira nemaoko, sarudza "Chip Insert" kana "KEY Sart" (SP20P chete inotsigira KEY kutanga). Paunenge uchishandisa otomatiki programming muchina, ndapota sarudza "ATE control (muchina modhi)"
6) Dzvanya OK kuti utore iyo yakamira data kune yakavakirwa-mukati ndangariro Mazano: yakamira data haizorasikike mushure mekunge mugadziri adzimwa, uye unogona kuramba uchiishandisa inotevera.
nguva.
- 10 -
SP20 Series Programmer
User Manual
4.2 Standalone programming operation
Manual mode
Programming nzira yekutora nekuisa machipisi nemaoko. Iwo manyorero ekushandisa matanho mune yakamira modhi ndeaya anotevera: 1) Dhawunirodha data rakazvimirira zvinoenderana nenzira iri muchikamu 4.1. Ziva kuti kana uchidhawunirodha data yakamira, sarudza yekutanga kutonga modhi se "Chip Kuiswa" (SP20P inogona zvakare kusarudza "Kiyi Kutanga"); 2) Bvisa tambo ye USB kubva pakombuta woibatanidza kune 5V simba adapta. Mushure mekunge programmer yabatidzwa, inotanga yatarisa iyo yemukati yakamira data kuti ione kutendeseka uye kurongeka kwedata. Izvi zvinotora 3-25 seconds. Kana bvunzo ikapfuura, chiratidzo chemwenje chinopenya bhuruu, zvichiratidza kuti mugadziri apinda mune yakamira programming mode. Kana iyo bvunzo ikakundikana, chiratidzo chinoratidza dzvuku kupenya mamiriro, zvichiratidza kuti hapana yakakodzera yakamira data mune iyo programmer, uye standalone programming haigone kutangwa;
Batanidza kune 5V magetsi adapta yeStandalone programming
Ongorora: SP20P chete ndiyo inogona kuratidza chimiro chekushanda chemugadziri zvakanyanya intuitive kuburikidza neOLED skrini, sezvakaratidzwa pamufananidzo uri pamusoro, inokurudzira kumirira kuti chip iiswe. 3) Isa iyo chip kuti igadziriswe pachigadziko cheZIF, chiratidzo chechiedza chinoshanduka kubva pakupenya kwebhuruu kusvika pakadzikama bhuruu, zvichiratidza kuti mugadziri aona chip uye ari programming; 4) Kana mwenje wechiratidzo ukashanduka wakasvibira, zvinoreva kuti chip programming yapera uye chirongwa chinobudirira. Kana mwenje wechiratidzo ukatsvuka, zvinoreva kuti ikozvino chip programming yatadza. Panguva imwecheteyo, mugadziri anomirira kuti chip chazvino chibviswe kubva paZIF socket. Kana buzzer prompt function ikabatidzwa, programmer inorira kana chirongwa chapera; 5) Bvisa chip uye uiise mune inotevera chip, dzokorora danho iri kusvika chirongwa chapera.
- 11 -
SP20 Series Programmer
User Manual
Otomatiki kudzora maitiro (kutonga kuburikidza neATE interface)
SP20X/SP20P ine ISP/ATE multiplexing interface, inogona kushandiswa neotomatiki programming michina uye mimwe michina otomatiki kuona otomatiki hurongwa (sarudza otomatiki uye isa machipisi, otomatiki hurongwa). Enderera sezvinotevera: 1) Dhawunirodha data yakamira zvinoenderana nenzira iri muchikamu 4.1. Ziva kuti kana uchirodha data yakamira, sarudza yekutanga kutonga modhi se "ATE control (muchina modhi)". Mune iyi nzira yekushanda, iyo ATE interface yemugadziri anogona kupa START/OK/NG/BUSY chiratidzo chechiratidzo; 2) Tungamira iyo chip pin line kubva kuZIF socket kuenda kumushini wekugadzira; 3) Batanidza mutsara wekutonga wemuchina kune programmer "ISP / ATE interface", mapini ekubatanidza anotsanangurwa sezvizvi;
ISP/ATE interface 4) Tanga kuronga.
3–BUSY 5–OK 9–NG 7–START 2–VCC 4/6/8/10–GND
4.3 Chimiro chechiratidzo mune yakamira modhi
Chimiro chechiratidzo
State tsananguro (manual nzira)
Kupenya kutsvuku
Mugadziri wepurogiramu haana kudhawunirodha data rakazvimirira
Inopenya yebhuruu yeBlue Green
Tsvuku
Mirira kuisirwa chip Kuronga chip Kugadziriswa kwechip kwapera uye chirongwa chinobudirira (Kumirira kubviswa kwechip) Chip programming yakundikana (Kumirira kubviswa kwechip)
Tsanangudzo yenyika (otomatiki kudzora maitiro, chete SP20X, SP20P)
Mugadziri wepurogiramu haana kudhawunirodha data rakazvimirira Programming chip Iyo chip programming inopedzwa uye chirongwa chinobudirira
Chip programming yakundikana
- 12 -
SP20 Series Programmer
User Manual
Chitsauko 5 Kuronga muISP modhi
Iro zita rakazara reISP riri MuSystem Chirongwa. Mune ISP programming modhi, iwe unongoda kubatanidza mashoma masaini mitsara kune akakodzera mapini eiyo onboard chip kuti uone kuverenga nekunyora mashandiro eiyo chip, iyo inogona kudzivirira dambudziko rekuparadza chip. SP20 yakatevedzana ine 10P ISP/ATE multiplexing interface, machipi ari pabhodhi redunhu anogona kurongwa kuburikidza neiyi interface.
5.1 Sarudza ISP programming mode
SP20 series programmers inogona kutsigira ISP mode programming yemamwe machipisi. Dzvanya bhatani re "chip modhi" musoftware kutsvaga iyo chip modhi kuti igadziriswe, uye sarudza "ISP modhi hurongwa mu "Adapter/Programming Mode" column "(Kana pasina ISP mode programming mune yakatsvaga chip programming nzira, zvinoreva kuti chip inogona kurongwa chete nesoketi yepurogiramu). Tarisa pamufananidzo uri pazasi:
5.2 ISP interface tsanangudzo
Iyo ISP interface tsananguro yeSP20 yakatevedzana programmer yakaita seiyi:
97531 10 8 6 4 2
ISP/ATE interface
A 10P color ISP tambo inogovaniswa zvisina tsarukano kuti ibatanidze ISP interface uye inonangwa bhodhi chip. Iyo 5x2P plug yakabatana neISP interface yemugadziri, uye imwe magumo yakabatana nepini inoenderana yechinangwa chip kuburikidza neDuPont header terminal.
Batanidza chip chipfuro kuburikidza nemusoro weDuPont
Hukama hunoenderana pakati peruvara rweISP tambo nemapini eiyo ISP interface ndeiyi:
Color
Brown Red Orange (kana pink) Yellow Green
Inoenderana neISP interface pini
1 2 3 4 5
Color
Bhuruu Yepepuru Gray White Dema
Inoenderana neISP interface pini
6 7 8 9 10
- 13 -
SP20 Series Programmer
User Manual
5.3 Batanidza chinonangwa chip
Dzvanya iyo "chip ruzivo" peji pane huru software interface kuti view iyo yekubatanidza schematic dhizaini yeISP interface uye chinangwa chip. Tarisa pamufananidzo uri pazasi:
Machipisi akasiyana ane nzira dzakasiyana dzekubatanidza. Ndokumbira tinya iyo "chip ruzivo" peji mune software kuti view iyo yakadzama yekubatanidza nzira dzeiyo chip.
5.4 Sarudza ISP magetsi ekupa maitiro
Munguva yeISP programming, iyo yakananga chip ine mbiri sarudzo dzemagetsi: inofambiswa neiyo programmer uye inozvifambisa yega nebhodhi inonangwa. Gadzirisa kana kutarisa "Ipa simba rekunongedza bhodhi" pane "Project Settings" peji yesoftware:
Tarisa "Ipa simba rechinangwa chebhodhi", iyo programmer ichapa simba kune yakanangwa bhodhi chip, ndapota sarudza simba rekupa vol.tage zvinoenderana neiyo chip yakayerwa kushanda voltage. Iyo programmer inogona kupa yakanyanya kuremerwa ikozvino ye250mA. Kana mutoro wazvino wakakurisa, mugadziri achaita kuti kuchengetedzwa kwepamusoro-ikozvino. Ndokumbirawo usatarise "Ipa simba rebhodhi rinonangwa" uye shandura kune iyo yakananga bhodhi's self-powered (SP20 programmer inogona kutsigira 1.65 V ~ 5.5V target board inoshanda voltage range, ISP chiratidzo chekutyaira voltage inozogadzirisa otomatiki neVCC voltaguye).
5.5 Kuronga kushanda
Tarisa kuti hardware yekubatanidza uye zvigadziriso zvesoftware ndezvechokwadi, uye tinya bhatani ISP programming yechip.
kupedzisa
ISP programming is relatively complicated, and you must be very familiar with the circuit; The connecting wires may introduce interference and the interference of other circuits on
bhodhi redunhu, izvo zvinogona kutungamira mukukundikana kweISP programming. Ndapota bvisa chip
uye shandisa yakajairwa chip socket kuronga;
- 14 -
SP20 Series Programmer
User Manual
Chitsauko 6 Kuronga muMulti-muchina Mode
Iyo programmer software inotsigira panguva imwe chete kushanda kweanosvika masere programmer akabatana nekombuta imwe (kugadzirwa kwehuwandu kana kudhawunirodha standalone data).
6.1 Hardware yekubatanidza yepurogiramu
1) Shandisa USB HUB kubatanidza akawanda programmer pakombuta USB port (USB hub inofanirwa kunge iine kunze kwemagetsi adapta, uye kunze kwemagetsi kunodiwa). Ziva kuti mune akawanda-machine mode, chete programmers yemhando imwechete inogona kushandiswa pamwechete, uye mhando dzakasiyana hadzigone kusanganiswa.
2) Tanga iyo SP20 programmer software, software yacho inongobatana kune ese akabatana programmers uye
enter the multi-machine mode. If the programmer software is already running, you can click Menu Programmer Reconnect, and the software will pop up the “Connect to the programmer” dialog box:
- 15 -
SP20 Series Programmer
User Manual
Sarudza programmer kuti abatanidzwe uye tinya OK. Mushure mekunge kubatana kwabudirira, software inopinda mu-multi-machine mode, uye iyo interface ndeyekutevera:
6.2 Kuronga kushanda
1) The programming operation is the same as the programming procedure in section 3.2: select chip model load file set operation options install programming socket;
2) Dzvanya iyo
bhatani (Cherechedza: SP20P inogona kusarudza miviri miviri yekuronga modhi: "Chip
Insert” uye “Kiyi Kutanga” Mumuenzaniso uyuampuye, sarudza iyo "Chip Insert" modhi), uye mugadziri anomirira chip
kuiswa;
3) Isa machipisi akarongwa musoketi yepurogiramu imwe neimwe, uye mugadziri achangotanga
programming mushure mekuona kuti machipisi akaiswa mukati. Imwe neimwe programmer inoshanda yakazvimirira, programming yakazara
asynchronous mode, hapana chikonzero chekumirira kuwiriranisa. Iyo software programming interface ndeyekutevera;
4) Tora uye isa machipisi zvinoenderana nerondedzero yemamiriro echiratidzo muChikamu 3.4 kana zvinokurudzira pachiratidziro kuti upedze huwandu hwese hwechip programming. Mazano: SP20F, SP20X, SP20P inotsigira yakamira hurongwa. Iwe unogona kushandisa iripo USB port pakombuta kubatanidza imwe kana akawanda programmer kurodha yakamira data, wobva washandisa yakamira nzira yekuronga misa. Kuenzaniswa ne USB nzira, iri nyore uye inoshanda zvakanyanya. SP20B haitsigire yakamira uye inogona chete kubatana nekombuta kuitira hurongwa hwehuwandu.
- 16 -
SP20 Series Programmer
User Manual
Appendix 1 FAQ
Ko iyo programmer inogona kutsigira img files?
Iyo programmer software inotsigira binary uye hexadecimal file encoding mafomati. The common suffix of binary files ndiye *.bin, uye chivakashure chehexadecimal files is *.hex;
img ari a file suffix, uye haimiriri iyo file encoding format. Kazhinji (pamusoro pe90%) yakadaro files are binary encoded. Ingoiisa iyo yakananga musoftware, software yacho inozoona otomatiki kana iyo file ibhinari kodhi, uye itakure mune inozivikanwa fomati;
Kuti ave nechokwadi chekururama kwe file kurodha, tinokurudzira kuti vashandisi vatarise buffer checksum uye file checksum neinjiniya (kana file kodhi vanopa / vatengi) mushure mekurodha zvakadaro files. (Idzi ruzivo rucharatidzwa pazasi pehwindo guru remunyori software.)
Ndezvipi zvikonzero zvinowanzoitika zvekutadza kwechirongwa (kusanganisira kudzima kutadza/ kutadza kwechirongwa/kutadza kuona/kutadza kweID, nezvimwewo)?
The chip manufacturer/model selected in the software does not match the actual chip; The chip is placed in the wrong direction, or the programming socket is inserted in the wrong position.
Please check the correct placement method through the “Chip Information” window of the software; Poor contact between the chip pins and the programming socket; Connect chips that have been soldered on other circuit boards by wires or IC programming clips, which may
cause programming failure due to circuit interference. Please put the chips back into the programming socket for programming; The chip may be damaged, replace with a new chip for testing.
Ndedzipi dziviriro dzeISP programming?
ISP programming relatively complex to realize, suitable for people with certain professional knowledge, you need to know how to read the circuit schematic and know the circuit diagram of the target board. The software supports ISP programming of some commonly used FLASH and EEPROM, first of all, you need to select the ISP programming method of the current chip in the software. When using the ISP programming method, you need to pay attention to the following matters: Ensure that the main controller (e.g. MCU/CPU) connected to the target Flash does not access the target
chip, and all the connected IO ports of the mian controller should be set to high resistance (you can try to set the mian controller to RESET state). Some control IO ports of the programmed chip must meet the normal working conditions of the chip, for example: The HOLD and WP pins of SPI FLASH must be pulled up to a high level. SDA and SCL of I2C EEPROM must have pull-up resistors, and WP pin must be pulled down to low level. Keep the connect wires as short as possible. Some chips fail to program with the included ISP cable Set the appropriate voltage/clock parameters for ISP programming in the Setup options: Only one of the two options can be used: powering the target board itself or powering the target board from the programmer. No matter which power supply method is used, the VCC must be connected. The ISP method is affected by the peripheral circuitry of the target board or the connecting wires, so it is not guaranteed that all chips can be burned successfully. If the connection and settings are repeatedly checked and still cannot be progrmmed successfully, it is recommended to remove the chip and programming it with a standard chip Socket. In mass production, try to use the first programming and then SMT method.
Sei iyo 24 yakatevedzana chip isina basa rekudzima?
Iyo chip yakavakirwa paEEPROM tekinoroji, iyo chip data inogona kunyorwa zvakananga pasina pre-kudzima, saka hapana erasing operation iripo;
Kana iwe uchida kudzima chip data, ndapota nyora FFH data zvakananga kune chip.
- 17 -
SP20 Series Programmer
User Manual
Nzira yekusimudzira sei programmer software uye firmware?
Dzvanya iyo programmer software menyu: Batsira-Tarisa kuti uwane zvigadziriso. Kana paine update, imwe update wizard ichabuda. Ndokumbira uteedzere zvinokurudzira kurodha pasuru yekusimudzira uye kuimisa;
Pinda nzvimbo yekurodha yeSfly official websaiti (http://www.sflytech.com), dhawunirodha yazvino programmer software uye uiise;
Inongoda kukwidziridza programmer software, hapana chikonzero chekusimudzira iyo programmer firmware.
Chii chandinofanira kuita kana pasina chip modhi muchirongwa chesoftware?
First upgrade the programmer software to the latest version; If there is no chip model to be programmed in the latest version of the software, please send an email to
nyorera kuti uwedzere. Ratidza ruzivo runotevera: programmer modhi, chip brand ichawedzerwa, yakadzama chip modhi, package (chiyeuchidzo: SP20 series programmers inogona chete kutsigira SPI NOR FLASH, EEPROM, mamwe marudzi emachipisi haagone kutsigirwa).
- 18 -
SP20 Series Programmer
User Manual
Appendix 2 Disclaimer
Shenzhen Sfly Technology Co, Ltd inoita nepainogona napo kuti ive nechokwadi chekurongeka kwechigadzirwa uye chine chekuita nesoftware uye zvinhu. Kune zvinogoneka chigadzirwa (kusanganisira software nezvimwe zvine hukama) hurema uye zvikanganiso, kambani ichaita nepainogona napo kugadzirisa dambudziko nekugona kwayo kwekutengesa uye kwehunyanzvi. Iyo kambani haina mhosva kune ese marudzi ezvinoitika, asingadzivisike, akananga, asina kunanga, akakosha, akawedzerwa kana chirango kukuvadza kunobva mukushandiswa kana kutengeswa kwechigadzirwa ichi, kusanganisira asi isina kuganhurirwa pakurasikirwa kwepurofiti, kufarira, kuwanikwa, kukanganiswa kwebhizinesi, kurasikirwa kwedata, nezvimwewo, haizove nemhosva kune chero yakananga, isina kunanga, inongoitika, yakakosha, inobvisa kukuvara uye chechitatu-inokuvadza.
- 19 -
Zvinyorwa / Zvishandiso
 |
SFLY SP20 Series High Speed Programmer [pdf] User Manual SP20B, SP20F, SP20X, SP20P, SP20 Series High Speed Programmer, SP20 Series, High Speed Programmer, Speed Programmer, Programmer |
