orolia SecureSync Nako le Sistimi ea Kamahanyo ea Maqhubu

Selelekela

Sistimi ea khokahano ea nako ea SecureSync le khafetsa e fana ka mokhoa oa ho itloaetsa le ho atoloha ka ho eketsoa ha likarete tse ngata tsa khetho ea modular.
Ho fihlela likarete tse 6 li ka amoheloa ho fana ka khokahano ho mefuta e mengata e fapaneng ea litšupiso le lisebelisoa. Palo e pharalletseng ea liprothokholo tsa setso le tsa sejoale-joale le mefuta ea matšoao e tšehetsoa ho kenyelletsa:

• matshwao a nako a dijithale le analoge le maqhubu (1PPS, 1MHz / 5MHz / 10 MHz)
• nako (IRIG, STANAG, ASCII)
• ho nepahala ho phahameng le nako e nepahetseng ea netweke (NTP, PTP)
• telecom nako (T1/E1), le tse ling.

Mabapi le Tokomane ena

Tataiso ena ea ho kenya karete e na le tlhaiso-leseling le litaelo tsa ho kenya likarete tsa mojule oa khetho yuniti ea Spectracom SecureSync.

HLOKOMELA: Mokhoa oa ho kenya o fapana, ho latela mofuta oa karete ea khetho e tla kenngoa.

Kemiso ea Mokhoa oa ho Kenya

Mehato e akaretsang e hlokahalang bakeng sa ho kenya likarete tsa khetho ea SecureSync ke tse latelang:

• Haeba u eketsa kapa u tlosa likarete tsa khetho tse fanang ka litšupiso, ka boikhethelo boloka tlhophiso ea hau ea SecureSync (sheba Karolo: "Tsela ea 2: Ho Boloka Tlhophiso ea Bohlokoa ba Reference", haeba ho sebetsa boemong ba hau kapa tikolohong ea hau.)
• Theola yuniti ea SecureSync ka mokhoa o sireletsehileng 'me u tlose sekoaelo sa chassis.
• TLHOKOMELISO: LE KA mohla u se ke ua kenya karete ea khetho ho tloha ka morao ho yuniti, KA TSOHLE ho tloha holimo. Ka hona hoa hlokahala ho tlosa sekoahelo se ka holimo sa chassis e kholo (ntlo).
• Etsa qeto ea hore na karete ea khetho e tla kenngoa ho eng.
• Lokisetsa sekotjana (haeba ho hlokahala), 'me u hokele karete ka har'a sekotjana.
• Hokela lithapo life kapa life tse hlokahalang le karete e sireletsehileng ea khetho sebakeng sa eona.
• Tlosa sekoaelo sa chassis, matla holim'a yuniti.
• Kena ho SecureSync web segokahanyi; netefatsa hore karete e kentsoeng e khethiloe.
• Khutlisa tlhophiso ea SecureSync (haeba e kile ea tšehelitsoe ka mehato ea pele).Tshireletso

Pele o qala mofuta ofe kapa ofe oa ho kenya karete ea khetho, ka kopo bala ka hloko lipolelo le litemoso tse latelang tsa ts'ireletso ho etsa bonnete ba hore yuniti ea SecureSync e theotsoe ka mokhoa o sireletsehileng le ka nepo (ka lithapo tsohle tsa motlakase tsa AC le DC li khaotsoe). Litaelo tsohle tsa ho kenya tse hlalositsoeng ho tloha joale tokomaneng ena li nka hore SecureSync yuniti e theotsoe ka mokhoa ona.
Kamehla etsa bonnete ba hore o latela litemoso, litataiso, kapa litemoso tse sebetsang nakong ea ho kenya, ho sebetsa le ho hlokomela sehlahisoa sa hau.

Ho phutha

Ha u fumana thepa, phutholla le ho hlahloba tse ka hare le lisebelisoa (boloka liphutheloana tsohle tsa mantlha bakeng sa ho li sebelisa ha ho hlokahala).
Lintlha tse ling tse latelang li kenyelelitsoe le khiti ea tlatsetso bakeng sa (li)karete tsa khetho 'me li ka hlokoa.

Ntho	Bongata	Nomoro ea Karolo
Thapo ea lithapo tse 50	1	CA20R-R200-0R21
Washer, flat, alum., #4, .125 tenya	2	H032-0440-0002
Screw, M3-5, 18-8SS, 4 mm, lock lock	5	HM11R-03R5-0004
Standoff, M3 x 18 mm, hex, MF, Zinc-pl. koporo	2	HM50R-03R5-0018
Standoff, M3 x 12 mm, hex, MF, Zinc-pl. koporo	1	HM50R-03R5-0012
Thae ea mohala	2	MP00000

Thepa e Eketsehileng e Hlokahalang Bakeng sa ho Hloma

Ntle le likarolo tse fanoeng le karete ea hau ea khetho, lintho tse latelang lia hlokahala bakeng sa ho kenya:

• Screwdriver ea hlooho ea # 1 ea Philips
• Cable tie clipper
• 6mm hex wrench.

Ho boloka Tlhophiso ea Bohlokoa ba Reference (boikhethelo)

Ha o eketsa kapa o tlosa likarete tsa mojule tsa khetho tse bonts'ang lintlha tse kang IRIG Input, ASCII Timecode Input, E-BA LE POTLAKO, 1-PPS Input, Frequency Input, joalo-joalo, tlhophiso efe kapa efe e hlalositsoeng ke mosebelisi ea Reference Priority Input e tla khutlisetsoa morao ho boemo ba kamehla ba feme bakeng sa tlhophiso ea Hardware ea SecureSync, 'me mosebelisi/mosebeletsi o tla hloka ho hlophisa bocha Tafole ea Bohlokoa ba Reference.

Haeba u ka rata ho tsoela pele ho sebelisa tlhophiso ea hau ea hajoale ea Reference Priority Input ntle le ho tlameha ho e kenya hape, Spectracom e khothaletsa ho boloka tlhophiso ea hajoale ea SecureSync pele o qala ka ho kenya hardware. Ka kopo sheba SecureSync Instruction Manual bakeng sa tlhahisoleseling e eketsehileng ("Backing Up the System Configuration Files”). Ka mor'a hore ho phethoe ho kenngoa ha hardware, SecureSync configuration e ka tsosolosoa (sheba PROCEDURE 12).

Ho Khetha Mokhoa o Nepahetseng oa ho Kenya

Mokhoa oa ho kenya karete ea khetho oa fapana, ho latela mofuta oa karete ea khetho, sebaka se khethiloeng sa ho kenya, le hore na sekotjana se ka tlase se sebelisoa kapa che (bakeng sa li-slots tse holimo feela).

• Hlalosa linomoro tse peli tsa ho qetela tsa nomoro ea karolo ea karete ea khetho ea hau (sheba leibole mokotleng).
• Lekola bokamorao ba ntlo ea SecureSync, 'me u khethe sebaka se se nang letho bakeng sa karete e ncha.
  Haeba karete e lokela ho kenngoa ho e 'ngoe ea li-slots tse ka holimo, ela hloko haeba slot e tlaase e tsamaisanang le eona e lutse.
• Sheba Lethathamo la 1: MEHATO EA HO INSTALLATION ka tlase:
  1. Fumana nomoro ea hau karolong e ka letsohong le letšehali
  2. Khetha sebaka sa hau sa ho kenya (joalo ka ha ho boletsoe ka holimo)
  3. Ha o sebelisa sekotjana se kaholimo, khetha "se na letho" kapa "populated"
  4. Tsoela pele ka ho kenya ka ho latela MEKHOA e thathamisitsoeng moleng o lumellanang ka letsohong le letona.

Tlase Slot Tlhophiso

Karolo ena e fana ka litaelo tsa ho kenya karete ea khetho sebakeng se tlase (1, 3, kapa 5) sa yuniti ea SecureSync.

• Theola yuniti ea SecureSync ka mokhoa o sireletsehileng 'me u tlose sekoaelo sa chassis.
  TLHOKOMELISO: LE KA mohla u se ke ua kenya karete ea khetho ho tloha ka morao ho yuniti, KA TSOHLE ho tloha holimo. Ka hona hoa hlokahala ho tlosa sekoahelo se ka holimo sa chassis e kholo (ntlo).
• Tlosa phanele e se nang letho kapa karete ea khetho e teng sebakeng sa slot.
  Haeba karete e kenya sekotjana ka holimo ho sekotjana se ka tlase karete eo u tla kengoa ho eona, e tlose.
• Kenya karete ka har'a sekotjana se ka tlase ka ho tobetsa sehokelo sa eona ka hloko sehokelong sa boardboard (sheba Setšoantšo sa 2), 'me u thehe masoba a screw kareteng ka chese.
• U sebelisa likurufu tse fanoeng tsa M3, phunya boto le poleiti ea khetho ka har'a chassis, u sebelisa torque ea 0.9 Nm/8.9 in-lbs.

TLHOKOMELISO: Netefatsa hore masoba a screw a kentsoeng kareteng a hlophisitsoe hantle 'me a sirelelitsoe ho chassis pele o matlafatsa unit, ho seng joalo ho ka baka tšenyo ea thepa.

Ho Kenyelletsoa ha Slot ho holimo, sekotjana se ka tlase ha se na letho

Karolo ena e fana ka litaelo tsa ho kenya karete ea khetho ka har'a slot e ka holimo (2, 4, kapa 6) ea yuniti ea SecureSync, e se nang karete e nang le slot e tlase.

• Theola yuniti ea SecureSync ka mokhoa o sireletsehileng 'me u tlose sekoaelo sa chassis.
• Tlosa phanele e se nang letho kapa karete ea khetho e teng.
• Beha e 'ngoe ea li-washer tse fanoeng holim'a lesoba le leng le le leng la chassis screw lesoba (bona setšoantšo sa 4), ebe u fafatsa li-standoffs tsa 18 mm (= li-standoffs tse telele) ka har'a chassis (sheba setšoantšo sa 3), u sebelisa torque ea 0.9 Nm/8.9 in -lbs.
• Kenya khetho ea karete ka har'a sekotjana, u kenye masoba a screw kareteng e nang le li-standoffs.
• U sebelisa li-screws tse fanoeng tsa M3, fafatsa boto ka har'a li-standoffs, le poleiti ea khetho ka har'a chas-sis, u sebelisa torque ea 0.9 Nm/8.9 in-lbs.
• Nka thapo ea ribone ea lipini tse 50 'me u e tobetse ka hloko sehokelong se lebotong le leholo (o ala ntlha e khubelu ea thapo e nang le PIN 1 leboteng le leholo), ebe u kenya sehokelo kareteng ea khetho (sheba setšoantšo sa 5 leqepheng le latelang. ).

TLHOKOMELISO: Netefatsa hore thapo ya ribone e hokahane mme e tlameletswe ka nepo ho diphini tsohle tse sehokelong sa karete.
Ho seng joalo, ho ka baka tšenyo ea lisebelisoa nakong ea matla a motlakase.

Ho Kenyelletsoa ha Slot e Phahameng, Setulo se Tlase se tšoaretsoe

Karolo ena e fana ka litaelo tsa ho kenya karete ea khetho ka har'a slot e ka holimo (2, 4, kapa 6) ea SecureSync unit, ka holim'a slot e tlaase e nang le batho ba bangata.

• Theola yuniti ea SecureSync ka mokhoa o sireletsehileng 'me u tlose sekoaelo sa chassis.
  TLHOKOMELISO: LE KA mohla u se ke ua kenya karete ea khetho ho tloha ka morao ho yuniti, KA TSOHLE ho tloha holimo. Ka hona hoa hlokahala ho tlosa sekoahelo se ka holimo sa chassis e kholo (ntlo).
• Tlosa phanele e se nang letho kapa karete ea khetho e teng.
• Tlosa li-screws tse sireletsang karete e seng e ntse e tlatsa slot e ka tlase.
• Hlakola li-standoffs tsa 18-mm kareteng ea khetho e nang le sekotjana se ka tlase (sheba setšoantšo sa 6) , u sebelisa torque ea 0.9 Nm/8.9 in-lbs.
• Kenya khetho ea karete ka har'a slot ka holim'a karete e teng, u ala likoti tse nang le li-standoffs.
• U sebelisa li-screws tse fanoeng tsa M3, fafatsa boto ka har'a li-standoffs, le poleiti ea khetho ka har'a chas-sis, u sebelisa torque ea 0.9 Nm/8.9 in-lbs.
• Nka thapo ea ribone ea lipini tse 50 'me u e tobetse ka hloko sehokelong se lebotong le leholo (o ala ntlha e khubelu ea thapo e nang le PIN 1 leboteng le leholo), ebe u kenya sehokelo kareteng ea khetho (sheba setšoantšo sa 7 leqepheng le latelang. ).

TLHOKOMELISO: Netefatsa hore thapo ya ribone e hokahane mme e tlameletswe ka nepo ho diphini tsohle tse sehokelong sa karete. Ho seng joalo, ho ka baka tšenyo ea lisebelisoa nakong ea matla a motlakase.

Likarete tsa Module tsa Output Frequency: Wiring

Mokhoa ona o kenyelletsa litaelo tse eketsehileng tsa ho kenya mefuta e latelang ea likarete:

• Likarete tsa mojule oa ho tsoa khafetsa:
  • 1 MHz (PN 1204-26)
  • 5 MHz (PN 1204-08)
  • 10 MHz (PN 1204-0C)
  • 10 MHz (PN 1204-1C)

Bakeng sa ho kenya cable, latela mehato e hlalositsoeng ka tlase:

• Kenya lithapo tsa coax ho PCB e kholo, u li hokela ho likhokahanyo tsa pele tse bulehileng tse fumanehang, ho tloha J1 - J4. Sheba setšoantšo se ka tlase:
  HLOKOMELA: Bakeng sa likarete tsa khetho tsa 10 MHz tse nang le likhoele tse 3 tsa coax: Ho tloha ka morao ho karete ea khetho, liphetho li ngotsoe J1, J2, J3. Qala ka ho hokela thapo e hoketsoeng ho J1 kareteng ho sehokelo sa pele se bulehileng se fumanehang ho Secure-Sync mainboard, ebe o hokela thapo e hoketsoeng ho J2, ebe J3 joalo-joalo.
• U sebelisa maqhama a lithapo tse fanoeng, sireletsa thapo ea coax ho tloha kareteng ea khetho ho ea ho litšepe tsa lithae tsa nylon tse tšoeu tse tlameletsoeng leboteng le leholo.

Ho kenya karete ea Gigabit Ethernet Module Card, Slot 1 Empty

Mokhoa ona o hlalosa ho kenngoa ha karete ea module ea Gigabit Ethernet (PN 1204-06), haeba slot 1 e se na letho.

HLOKOMELA: Karete ea khetho ea Gigabit Ethernet e tlameha ho kenngoa ho Slot 2. Haeba ho na le karete e seng e kentsoe Slot 2, e tlameha ho fallisetsoa sebakeng se fapaneng.

• Theola yuniti ea SecureSync ka mokhoa o sireletsehileng 'me u tlose sekoaelo sa chassis.

TLHOKOMELISO: LE KA mohla u se ke ua kenya karete ea khetho ho tloha ka morao ho yuniti, KA TSOHLE ho tloha holimo. Ka hona hoa hlokahala ho tlosa sekoahelo se ka holimo sa chassis e kholo (ntlo).

• Nka li-washer tse fanoeng 'me u li behe holim'a masoba a screw ea chassis.
• Sireletsa li-standoffs tse fanoeng tsa 18-mm sebakeng sa li-washer (sheba setšoantšo sa 10), u sebelisa torque ea 0.9 Nm/8.9 in-lbs.
• Ka lebokoseng le ka sehloohong la SecureSync, tlosa screw e ka tlas'a sehokelo sa J11 'me u nke sebaka ka sebaka sa 12-mm se fanoeng (bona Setšoantšo sa 10).
• Kenya karete ea khetho ea Gigabit Ethernet ho Slot 2, 'me u tobetse fatše ka hloko ho lekana lihokelo tse tlase ho karete ea Gigabit Ethernet ho lihokelo tse ho mainboard.
• Sireletsa karete ea khetho ka ho phunya li-screw tsa M3 tse fanoeng ho:
  • li-standoffs ka bobeli holim'a chassis
  • ho ema ho eketsoa holim'a lebokose le leholo
  • le ka har'a chassis e ka morao. Kenya torque ea 0.9 Nm/8.9 in-lbs.

Kenyelletso ea Karete ea Gigabit Ethernet Module, Slot 1 e tšoaretsoe

Ts'ebetso ena e hlalosa ho kenya karete ea module ea Gigabit Ethernet (PN 1204-06), haeba ho na le karete ea khetho e kentsoeng ho slot 1.

HLOKOMELA: Karete ea khetho ea Gigabit Ethernet e tlameha ho kenngoa ho Slot 2. Haeba ho na le karete e seng e kentsoe Slot 2, e tlameha ho fallisetsoa sebakeng se fapaneng.

• Theola yuniti ea SecureSync ka mokhoa o sireletsehileng 'me u tlose sekoaelo sa chassis.
   TLHOKOMELISO: LE KA mohla u se ke ua kenya karete ea khetho ho tloha ka morao ho yuniti, KA TSOHLE ho tloha holimo. Ka hona hoa hlokahala ho tlosa sekoahelo se ka holimo sa chassis e kholo (ntlo).
• Tlosa phanele e se nang letho kapa karete ea khetho e teng.
• Tlosa li-screws tse peli tse sireletsang karete e ka tlaase (eseng li-panels).
• Sekelletsa li-standoffs tse fanoeng tsa 18-mm sebakeng, o sebelisa torque ea 0.9 Nm/8.9 in-lbs.
• Ka lebokoseng le ka sehloohong la SecureSync, tlosa screw e ka tlas'a sehokelo sa J11 'me u nke sebaka ka sebaka sa 12-mm se fanoeng (bona Setšoantšo sa 11).
• Kenya karete ea khetho ea Gigabit Ethernet ho Slot 2, 'me u tobetse fatše ka hloko ho lekana lihokelo tse tlase ho karete ho sehokelo se ho mainboard.
• Sireletsa karete ea khetho ka ho phunya li-screw tsa M3 tse fanoeng ho:
  • li-standoffs ka bobeli holim'a chassis
  • ho ema ho eketsoa holim'a lebokose le leholo
  • le ka har'a chassis e ka morao. Kenya torque ea 0.9 Nm/8.9 in-lbs.

Alarm Relay Module Card, Ho kenya Cable

Mokhoa ona o hlalosa mehato e meng ea ho kenya karete ea mojule oa Alarm Relay Output (PN 1204-0F).

• Hokela mohala o fanoeng, karolo ea karolo ea 8195-0000-5000, ho sehokelo sa mainboard J19 "RE-LAYS".
• U sebelisa maqhama a lithapo a fanoeng, sireletsa thapo, karolo ea nomoro 8195-0000-5000, ho tloha kareteng ea khetho ho ea ho litšepe tsa lithae tsa nylon tse tšoeu tse tlameletsoeng leboteng le leholo (sheba setšoantšo sa 12).

Ho netefatsa ho fumanoa ha HW le SW Update

Pele o qala ho laola likarolo kapa ts'ebetso efe kapa efe e fanoeng ke karete e ncha, ho bohlokoa ho netefatsa ts'ebetso e atlehileng ka ho netefatsa hore karete e ncha ea khetho e fumanoe ke yuniti ea SecureSync.

• Kenya hape sekoaelo se ka holimo sa chassis ea yuniti (ntlo), u sebelisa li-screw tse bolokiloeng.
  TLHOKOMELISO: Netefatsa hore masoba a screw a kentsoeng kareteng a hlophisitsoe hantle 'me a sirelelitsoe ho chassis pele o matlafatsa unit, ho seng joalo ho ka baka tšenyo ea thepa.
• Matla ho yuniti.
• Netefatsa ho instola tse atlehileng ka ho etsa bonnete ba hore karete e fumanwe

Khokahano e sireletsehileng Web UI, ≤ Mofuta oa 4.x

Bula a web sebatli, 'me u kene ho SecureSync web segokahanyi. E ea leqepheng la STATUS/INPUTS le/kapa STATUS/OUTPUTS. Lintlha tse hlahang maqepheng ana li tla fapana ho ipapisitsoe le karete ea mojule ea khetho ea hau/SecureSync tlhophiso (bakeng sa mohlalaample, Multi-Gigabit Ethernet khetho ea karete ea mojule e na le ts'ebetso ea ho kenya le ho tsoa, ​​'me e bonts'oa maqepheng ka bobeli).
HLOKOMELA: Haeba ka mor'a ho kenya karete e bonahala e sa tsejoe hantle, ho ka 'na ha hlokahala hore u ntlafatse SecureSync system software ho mofuta oa morao-rao o fumanehang.

SecureSync Web UI, ≥ Mofuta oa 5.0

Bula a web sebatli, kena ho SecureSync Web UI, ebe u ea ho INTERFACES > KHETHO CARDS: Karete e ncha e tla hlahisoa lenaneng.

• Haeba karete e bonahala e sa tsejoe hantle, tsoela pele ka ntlafatso ea Sisteme Software joalo ka ha ho hlalositsoe ka tlase, ebe u ea ho INTERFACES > KGETHO CARDS hape ho netefatsa hore karete e fumanwe.
• Haeba karete e fumanoe hantle, tsoela pele ka ntlafatso ea Software joalo ka ha ho hlalositsoe ka tlase ho netefatsa SecureSync le karete e sa tsoa kenngoa e sebelisa mofuta o tšoanang, oa morao-rao o fumanehang.

Ho ntlafatsa Software ea Sisteme

Leha karete ea khetho e sa tsoa kenngoa e se e fumanoe, mme leha mofuta oa morao-rao oa System Software o kentsoe yuniti ea hau ea SecureSync, o tlameha (botjha) kenya software ho netefatsa hore SecureSync ka bobeli, mme karete ea khetho e sebelisa software ea morao-rao:

• Latela mokhoa oa ntlafatso oa Software Software, joalo ka ha ho hlalositsoe ho Bukana ea mantlha ea mosebelisi tlasa Lintlafatso tsa Software.
  E 'NGOE: Khutlisetsa tlhophiso ea hau ea pele ea litšupiso, joalo ka ha ho hlalositsoe sehloohong se latelang, 'me u hlophise litlhophiso tse ling tse ikhethileng tsa karete, joalo ka ha ho hlalositsoe ho Bukana ea Mosebelisi.

Ho Khutlisa Litlhophiso tsa Reference Priority Configuration (boikhethelo)

Pele o hlophisa karete e ncha ho web sehokelo sa mosebelisi, Sebopeho sa Sistimi Files li hloka ho tsosolosoa, haeba u li bolokile tlas'a PROCEDURE 2.
Ka kopo sheba SecureSync Instruction Manual tlas'a "Ho Khutlisa Sebopeho sa Sistimi Files” bakeng sa boitsebiso bo eketsehileng.
SecureSync Instruction Manual e boetse e hlalosa tlhophiso le ts'ebetso ea mefuta e fapaneng ea likarete tsa khetho.

Tšehetso ea Theknoloji le Bareki

Haeba u ka hloka thuso e eketsehileng mabapi le tlhophiso kapa ts'ebetso ea sehlahisoa sa hau, kapa u na le lipotso kapa litaba tse ke keng tsa rarolloa ho sebelisoa lintlha tse tokomaneng ena, ka kopo ikopanye le Oroli-aTechnical/Customer Support ho litsi tsa rona tsa Amerika Leboea kapa Europe, kapa etela Orolia website at www.orolia.com

HLOKOMELA: Bareki ba Tšehetso ea Premium ba ka bua ka likonteraka tsa bona tsa litšebeletso bakeng sa ts'ehetso ea lihora tse 24 tsa tšohanyetso.

Litokomane / Lisebelisoa

orolia SecureSync Nako le Sistimi ea Kamahanyo ea Maqhubu [pdf] Tlhophiso Tataiso SecureSync Sistimi ea Kamahanyo ea Nako le Maqhubu, Sisteme e Sireletsehileng, Sistimi ea Kamahanyo ea Nako le Khafetsa, Sistimi ea Kamahanyo ea khafetsa, Sistimi ea Kamahanyo.

Litšupiso

• Bukana ea Mosebelisi