LIGHTRONICS SR616D Molaoli oa Mehaho

TLHALOSO

• SR616 e fana ka taolo e nolofalitsoeng ea hole bakeng sa lisebelisoa tsa mabone tsa DMX512. Yuniti e ka boloka lits'oants'o tse 16 tse felletseng tsa mabone 'me ea li kenya tšebetsong ka ho tobetsa konopo. Litšoantšo li hlophisitsoe ka libanka tse peli tsa litšoantšo tse robeli e 'ngoe le e 'ngoe. Lits'oants'o tse ho SR616 li ka sebetsa ka mokhoa o "khethehileng" (setšoantšo se le seng se sebetsang ka nako e le 'ngoe) kapa ka mokhoa oa "qubu-on" o nolofalletsang liketsahalo tse ngata ho kenyelletsoa hammoho.
• Sehlopha se ka sebetsa le mefuta e meng ea li-remote tse bohlale tsa Lightronics le li-switches tse bonolo tse hole bakeng sa taolo libakeng tse ngata. Li-remoutu tsena ke li-unit tsa marako 'me li hokela ho SR616 ka matla a tlasetage ka bulela le ho tima litšoantšo tsa SR616.
• Sehlopha sena se ka boela sa sebelisoa bakeng sa ts'ebetso ea tsamaiso ea mabone ntle le tšebeliso ea motho ea koetlisitsoeng ho molaoli ea ka sehloohong oa mabone. SR616 e boloka liketsahalo tse bolokiloeng ha e tima. E ka sebelisoa khafetsa ntle le molaoli oa mabone oa DMX. Molaoli o hlokahala feela ho rekota liketsahalo ho tsoa.

LITLHAKISO MATLA

• SR616 e tsamaisoa ho tsoa ho molumo o tlase oa kantletagphepelo ea motlakase e fanang ka +12 Volts DC ho 2 Amps bonyane. Sena se kenyelelitsoe le SR616.

TLHOKOMELO SR616D

• SR616D ea nkeha 'me e reretsoe ho sebelisoa komporong kapa sebakeng se seng se nepahetseng se otlolohileng. Ho hlokahala motlakase oa 120 Volt AC bakeng sa phepelo ea motlakase.

MAKHOPO

• TIMA DICONSOLES TSOHLE, DIMMER PACKS LE MEHLODI YA MATLA PELE O ETSA DIKGOLAO TSA KA NTLE HO SR616D.
• SR616D e na le likhokahano pheletsong e ka morao ea yuniti bakeng sa khokahano ho tloha ho molaoli oa DMX ho ea ho lisebelisoa tsa DMX, liteishene tse hole le matla. Litafole le litšoantšo tsa likhokahanyo li kenyelelitsoe bukeng ena.

MATLA MATLA

• Sehokelo sa matla sa kantle se ka morao ho yuniti ke plug ea 2.1mm. Pini e bohareng ke lehlakore le nepahetseng (+) la sehokelo www.lightronics.com

DMX LIKELETSO

• Sehokelo sa Pin tse hlano MALE XLR se sebelisoa ho hokahanya selaoli sa mabone sa DMX (se hlokahalang ho etsa litšoantšo).
• Sehokelo sa li-pin tse hlano tsa FEMALE XLR se sebelisoa ho hokela ho sekhechana sa DMX kapa ketane ea lisebelisoa tsa DMX.
• Lipontšo tsa DMX li lokela ho nkoa ka mohala o sothehileng, o sirelelitsoeng, o tlaase (25pF / ft. kapa ka tlase).
• Boitsebiso ba lets'oao la DMX bo bontšoa tafoleng e ka tlase. E sebetsa ho lihokelo tsa MALE le FEMALE. Linomoro tsa phini lia bonahala sehokelong.

Khokahano Pin #	Lebitso la Letshwao
1	DMX Tloaelehileng
2	DMX DATA -
3	DMX DATA +
4	Ha e Sebediswe
5	Ha e Sebediswe

KHOKANE KHOLO

• SR616D e ka sebetsa ka mefuta e meraro ea liteishene tsa marako tse hole. Mofuta oa pele ke liteishene tse hole tsa Lightronics pushbutton. Li-remote tsena li kenyelletsa mohala oa Lightronics oa liteishene tse hole tsa AC, AK, le AI. SR616D e ka sebetsa le Lightronics
• Liteishene tsa AF tse hole. Mofuta oa boraro ke li-switches tse bonolo tsa nakoana. Mefuta eohle e hole e hokela ho SR616D ka sehokelo sa 9 pin (DB9) lehlakoreng le ka morao la yuniti. Likabelo tsa phini tsa sehokelo sa DB9 li bontšitsoe tafoleng e ka tlase. Linomoro tsa phini li bonahala sefahlehong sa sehokelo.

Khokahano Pin #	Lebitso la Letshwao
1	Switch e bonolo e tloaelehileng
2	Phetoho e bonolo #1
3	Phetoho e bonolo #2
4	Phetoho e bonolo #3
5	Switch e bonolo e tloaelehileng
6	Smart Remote Common
7	DATA e hole ya Smart -
8	Smart Remote DATA +
9	Smart Remote Voltage +

• Sheba litataiso tsa beng ba remoutu leboteng bakeng sa litaelo tse khethehileng tsa likhokahano tsa remoutu.

PUSHBUTTON/FADER SMART REMOTE Connections

• Puisano le liteishene tsena e mabapi le bese ea terata ea terata e 4 e nang le lithapo tsa data tse sothehileng tse peli. Sehlopha se le seng se na le data (Smart Remote DATA - le Smart Remote DATA +). Tsena li hokela ho pin 7 & 8 ea sehokelo sa DB9. Lipara tse ling li fana ka matla ho liteishene (Smart Remote Common le Smart Remote Voltage +). Tsena li hokela ho pin 6 & 9 ea sehokelo sa DB9.
• Li-remote tse ngata tse bohlale tsa mefuta e tsoakiloeng li ka hokela beseng ena.
• Mohlankanaample sebelisa Lightronics AC1109 le AF2104 liteishene tsa marako tse hole tse bohlale li bonts'itsoe ka tlase.

HLALE KA NAKO KHOLO

BONOLO FETOHA LITETEI

• Lithakhisa tse hlano tsa pele tsa sehokelo sa SR616D DB9 li sebelisoa ho hokahanya mats'oao a hole a switjha. Ke COM, SWITCH 1, SWITCH 2, SWITCH 3, COM. Li-terminals tse peli tsa SIMPLE COM li hokahane ka hare ho tse ling.
• Setšoantšo se latelang se bontša example sebelisa li-remoutu tse peli tse bonolo. Merero e meng e mengata e etselitsoeng basebelisi e ka sebelisoa ho hokahanya li-remote tsena.
• Example sebelisa seteishene sa switjha sa Lightronics APP01 le switch e tloaelehileng ea nakoana ea konopo.

BONOLO FETOHA REMOTE EXAMPLE

• Haeba lits'ebetso tse bonolo tsa SR616D li behiloe tšebetsong ea kamehla ea feme, li-switch li tla sebetsa ka tsela e latelang bakeng sa khokahano ea khale.ample bontšitsoeng ka holimo.

1. Scene #1 e tla buloa ha toggle switch e sutumelletsoa holimo.
2. Scene #1 e tla tingoa ha toggle switch e sutumetsoa fatše.
3. Scene #2 e tla buloa kapa HO TLOA nako le nako ha konopo ea nakoana e sutumetsoa.

TLHOKOMELO SR616W

• SR616W e kenya ka har'a lebokose le tloaelehileng la marako la lihlopha tse peli. Ho fanoa ka poleiti e se nang screwless.

MAKHOPO

• TIMA DICONSOLES TSOHLE, DIMMER PACKS LE METSOPO YA MATLA PELE O ETSA DIKHOKELO TSA KA NTLE HO SR616W.
  SR616W e na le likhokahano tsa plug-in screw terminal ka morao ho yuniti. Li-terminals tsa khokahano li tšoailoe mabapi le ts'ebetso ea tsona kapa lets'oao.
• Setšoantšo sa khokahano se kenyelelitsoe bukeng ena. Li-connectors li ka tlosoa ka ho li hula ka hloko ho tloha boto ea potoloho.

MATLA MATLA

• Ho fanoe ka sehokelo sa phini tse peli bakeng sa matla. Li-terminals tsa sehokelo li tšoailoe kareteng ea potoloho ho bontša polarity e hlokahalang. Polarity e nepahetseng e tlameha ho shejoa le ho bolokoa.

MAKHOPO KA NTLE

DMX LIKELETSO

• Ho sebelisoa li-terminals tse tharo ho hokahanya lebone la mabone la DMX (le hlokahalang ho etsa liketsahalo). Li tšoailoe joalo ka COM, DMX IN -, le DMX IN +.
• Letšoao la DMX le lokela ho fetisoa holim'a thapo e sothehileng, e sirelelitsoeng, e nang le matla a tlaase.

REOTES MAKHOPO

• SR616W e ka sebetsa ka mefuta e meraro ea liteishene tse hole. Mofuta oa pele ke liteishene tse hole tsa Lightronics pushbutton. Ea bobeli ke liteishene tse bohlale tse hole tsa Lightronics. Ea boraro ke ho koala li-switches tse bonolo tsa nakoana.

PUSHBUTTON/FADER SMART REMOTE Connections

• Li-remote tsena li kenyelletsa mohala oa Lightronics oa liteishene tse hole tsa AC, AK, AF le AI. Puisano le liteishene tsena e mabapi le libese tse 4 tsa wire daisy tse nang le lithapo tse peli tse sothehileng, tse sirelelitsoeng ka lithapo tsa data tse nang le matla a tlase. Sehlopha se le seng se na le data. Lipara tse ling li fana ka matla ho liteishene tse hole. Li-remote tse ngata tse bohlale tsa mefuta e tsoakiloeng li ka hokela beseng ena.
• Likhokelo tsa libese bakeng sa li-remoutu tse bohlale li ho www.lightronics.com liteishene tse tšoailoeng COM, REM-, REM+, le +12V.
• Sheba litataiso tsa beng ba remoutu leboteng bakeng sa litaelo tse khethehileng tsa likhokahano tsa remoutu.

LIKHOKELO TSE HLALELANG EXAMPLE

• Mohlankanaample sebelisa Lightronics AC1109 le AF2104 smart remote wall station e bontšitsoe ka tlase.

HLALE KA NAKO KHOLO

BONOLO FETOHA LITETEI

• Ho sebelisoa li-terminals tse hlano ho hokahanya mats'oao a hole a switjha. Li tšoailoe e le COM, SWITCH 1, SWITCH 2, SWITCH 3, COM. Li-terminals tsa SIMPLE REM COM li hokahane ho tse ling ho boto ea potoloho e hatisitsoeng.
• MohlankanaampLe e nang le li-remote tse peli tsa switjha e bontšitsoe ka tlase.

BONOLO FETOHA MAKHOPO

• Example sebelisa seteishene sa switjha sa Lightronics APP01 le konopo ea nakoana. Haeba lits'ebetso tse bonolo tsa SR616W li behiloe tšebetsong ea kamehla ea feme li-switch li tla sebetsa ka tsela e latelang.

1. Scene #1 e tla buloa ha toggle switch e sutumelletsoa holimo.
2. Scene #1 e tla tingoa ha toggle switch e sutumelletsoa tlase.
3. Scene #2 e tla BONAHALA kapa HO TLOA nako le nako ha konope ea nakoana e sutumetsoa.

TLHOKOMELISO EA SR616
Boitšoaro ba SR616 bo laoloa ke sehlopha sa likhoutu tsa ts'ebetso le litekanyetso tse amanang le tsona. Lenane le felletseng la likhoutu tsena le tlhaloso e khuts'oane li bonts'itsoe ka tlase. Litaelo tse tobileng tsa mosebetsi ka mong li fanoe bukeng ena.

1. Banka A, Scene 1 Fide Time
2. Banka A, Scene 2 Fide Time
3. Banka A, Scene 3 Fide Time
4. Banka A, Scene 4 Fide Time
5. Banka A, Scene 5 Fide Time
6. Banka A, Scene 6 Fide Time
7. Banka A, Scene 7 Fide Time
8. Banka A, Scene 8 Fide Time
9. Banka B, Scene 1 Fide Time
10. Banka B, Scene 2 Fide Time
11. Banka B, Scene 3 Fide Time
12. Banka B, Scene 4 Fide Time
13. Banka B, Scene 5 Fide Time
14. Banka B, Scene 6 Fide Time
15. Banka B, Scene 7 Fide Time
16. Banka B, Scene 8 Fide Time
17. Blackout (OFF) Fade Nako
18. Lits'oants'o TSOHLE le Nako ea Blackout e Fihla
19. Kenyelletso e Bonolo ea #1 Khetho
20. Kenyelletso e Bonolo ea #2
21. Kenyelletso e Bonolo ea #3
22. Ha e Sebediswe
23. Likhetho tsa Tlhophiso ea Sistimi 1
24. Likhetho tsa Tlhophiso ea Sistimi 2
25. Lihlopha tse Ikhethang tsa Sehlopha sa Pele
26. Lihlopha tse Ikhethang tsa Sehlopha sa Pele
27. Lihlopha tse Ikhethang tsa Sehlopha sa Pele
28. Lihlopha tse Ikhethang tsa Sehlopha sa Pele
29. Fader ID #00 Ho qala Scene
30. Fader ID #01 Ho qala Scene
31. Fader ID #02 Ho qala Scene
32. Fader ID #03 Ho qala Scene

Setšoantšo se ka morao bukeng ena se fana ka tataiso e potlakileng ea ho hlophisa yuniti.

REKOTO LETLOTLO

• Ena ke konopo e nyane haholo e kentsoeng ka har'a lesoba le lenyane ho faceplate. E ka tlase hanyane ho RECORD LED (e ngotsoeng REC). O tla hloka thupa e nyane (jwalo ka pene kapa sekotwana sa pampiri) ho e sututsa.

HO FUMANA LE HO BEA MESEBETSI

1. Tšoara REC ho feta metsotsoana e 3. Leseli la REC le tla qala ho panya.
2. Sutumelletsa KHOPOTSO. Mabone a RECALL le REC a tla benya ka ho fapana.
3. Kenya khoutu ea tšebetso ea linomoro tse 2 u sebelisa likonopo tsa ketsahalo (1 – 8). Mabone a ketsahalo a tla khantša mokhoa o pheta-phetoang oa khoutu e kentsoeng. Yuniti e tla khutlela mokhoeng oa eona o tloaelehileng oa ts'ebetso kamora metsotsoana e ka bang 60 haeba ho se na khoutu e kentsoeng.
4. Sutumelletsa KHOPOTSO. Mabone a RECALL le REC a tla ON. Mabone a ketsahalo (maemong a mang a kenyelletsang OFF (0) le mabone a BANK (9)) a tla bonts'a maemo a hajoale a ts'ebetso kapa boleng.

• Ketso ea hau joale e itšetlehile ka hore na ke mosebetsi ofe o kentsoeng. Sheba litaelo tsa mosebetsi oo. U ka kenya litekanyetso tse ncha 'me u sutumelletsa REC ho li boloka kapa ho sutumelletsa RECALL ho tsoa ntle le ho fetola litekanyetso.

HO BEA LINAKO TSA FEELA (Mekhoutu ya Tshebetso 11 – 32)

• Nako ea ho fifala ke metsotso kapa metsotsoana ea ho tsamaea lipakeng tsa liketsahalo kapa hore liketsahalo li BULE kapa HO TLOA. Nako ea ho nyamela bakeng sa ketsahalo ka 'ngoe e ka behoa ka bonngoe. Sebaka se lumelletsoeng ke ho tloha metsotsoana e 0 ho isa ho metsotso e 99.
• Nako ea Fade e kenngoa e le linomoro tse 4 'me e ka ba metsotso kapa metsotsoana.
• Linomoro tse kentsoeng ho tloha ho 0000 - 0099 li tla ngoloa e le metsotsoana.
• Nomoro 0100 ho ea holimo e tla ngoloa e le metsotso e lekanang 'me linomoro tse peli tsa ho qetela li ke ke tsa sebelisoa. Ka mantsoe a mang, metsotsoana e tla hlokomolohuoa.
• Kamora ho fihlella tšebetso (11 - 32) joalo ka ha e hlalositsoe ho HO FUMANA LE HO BEA MESEBETSI:

1. Mabone a ketsahalo + OFF (0) le mabone a BANK (9) a tla benya mokhoa o pheta-phetoang oa tlhophiso ea nako ea hona joale ea fade.
2. Sebelisa likonopo tsa ketsahalo ho kenya nako e ncha ea fade (litlhaloso tse 4). Sebelisa OFF bakeng sa 0 le BANK bakeng sa 9 ha ho hlokahala.
3. Sututsa REC ho boloka tlhophiso e ncha ea ts'ebetso.

• Function Code 32 ke ts'ebetso e kholo ea nako ea fade e tla beha linako TSOHLE tsa ho fifala ho boleng bo kentsoeng. U ka sebelisa sena bakeng sa maemo a motheo bakeng sa linako tse nyamelang ebe u beha liketsahalo tsa motho ka mong ka linako tse ling kamoo ho hlokahalang.

BONOLO REMOTE PHETOA MAIKUTLO

• SR616 e na le mekhoa e mengata haholo ea hore na e ka arabela joang ho lisebelisoa tse bonolo tsa hole. Mongolo o mong le o mong oa switjha o ka hlophisoa hore o sebetse ho latela litlhophiso tsa ona.
• Litlhophiso tse ngata li amana le ho koaloa ha nakoana. Boemo ba MAINTAIN bo lumella ho sebelisa sesebelisoa sa kamehla sa ON/OFF. Ha e sebelisoa ka tsela ena, sebaka (s) se sebetsang se tla buloa ha sesebelisoa se ntse se koetsoe 'me se TIMA ha sesebelisoa se butsoe.
• Liketsahalo tse ling li ntse li ka kengoa tšebetsong 'me konopo ea OFF e tla tima MAINTAIN scene.

HO HLOMELA LIKHETHO TSA HO FIHLELA HO SEBETSA

(Likhoutu tsa Ts'ebetso 33 - 35)

Kamora ho fihlella ts'ebetso joalo ka ha e hlalositsoe ho HO FIHLELA LE HO BEA MESEBETSI:

1. Mabone a ketsahalo a kenyeletsang OFF (0) le BANK (9) a tla khantša mokhoa o pheta-phetoang oa boemo ba hona joale.
2. Sebelisa likonopo tsa ketsahalo ho kenya boleng (litlhaloso tse 4). Sebelisa OFF bakeng sa 0 le BANK A/B bakeng sa 9 ha ho hlokahala.
3. Sututsa REC ho boloka boleng bo bocha ba ts'ebetso.

• Lintlha tsa tšebetso le tlhaloso li tjena:

KETSAHALO ON/OFF TAOLI

• 0101 - 0116 Bulela Scene (1-16)
• 0201 - 0216 Tima Scene (1-16)
• 0301 - 0316 Toggle ON/OFF Scene (1-16)
• 0401 - 0416 PHETHA Pono (1-16)

MOLAOLI TŠEBELE

• 0001 Hlokomoloha tlhahiso ena ea switjha
• 0002 Blackout - tima litšoantšo tsohle
• 0003 Hopola liketsahalo tsa ho qetela

DIKGETHO TSA TLHOKOMELO TSA HO PETA 1 (Khoutu ya Tshebetso 37)

• Likhetho tsa tlhophiso ea sistimi ke boits'oaro bo ikhethileng bo ka buloang kapa ba TIMA.
• Kamora ho fihlella khoutu ea tšebetso (37) joalo ka ha ho hlalositsoe ho HO FIHLELA LE HO BEA MESEBETSI:

1. Mabone a sebaka (1 - 8) a tla bontša hore na ke likhetho life tse khantšitsoeng. Leseli la ON le bolela hore khetho e sebetsa.
2. Sebelisa likonopo tsa ketsahalo ho fetola khetho e amanang le eona HO ON le HO TLOA.
3. Sututsa REC ho boloka tlhophiso e ncha ea ts'ebetso.

• Likhetho tsa tlhophiso ke tse latelang:

MOKHOA OA SENE 1 SENE REKHOTO HO KOETELOA

• E thibela ho rekota ketsahalo. E sebetsa lits'ebetsong TSOHLE.

SCENE 2 THIBELA BANK

• E tima konopo ea Banka. Lits'oants'o tsohle li ntse li fumaneha ho tsoa ho li-remote tse bohlale haeba li hlophiselitsoe ho li sebelisa.

SCENE 3 LOCKOUT E SMART REMOTE KA DMX

• E tima Smart Remotes haeba lets'oao la ho kenya la DMX le le teng.

SCENE 4 LOCUTANE YA LEHAE HO LOCKOUT KA DMX

• E tima likonopo tsa ketsahalo ea SR616 haeba lets'oao la ho kenya la DMX le le teng.

SCENE 5 LOCKOUT E BONOLO REMOTE KA DMX

• E tima li-switches tse bonolo tsa remoutu haeba lets'oao la ho kenya la DMX le le teng.

SCENE 6 BULELA SENE E BOFELONG TSA POWERUP

• Haeba ketsahalo e ne e sebetsa ha SR616 e tima e tla bulela ketsahalo eo ha matla a khutlisoa.

SCENE 7 EXCLUSIVE GROUP TOGGLE DISable

• E thibela bokhoni ba ho tima litšoantšo tsohle sehlopheng se ikhethileng. E qobella litšoantšiso tsa ho qetela tsa sehlopha hore li lule li le teng ntle le haeba u sutumelletsa OFF.

KETSAHALO EA 8 HLOKA POTSO EA HO FALA

• E thibela mabone a ketsahalo ho panya ha nako ea ketsahalo.

DIKGETHO TSA TLHOKOMELO TSA HO PETA 2 (Khoutu ya Tshebetso 38)

• KETSAHALO 1-5 E BOLOKETSOE HO SEBELISA KAMONG

MOKHOA OA 6 MASTER/MAKHOBA

• E fetola SR616 ho tloha ho mokhoa oa ho fetisa hore o amohele mokhoa oa ho amohela ha master dimmer (ID 00), SC kapa SR unit e se e le tsamaisong.

MOSEBETSI OA 7 TŠEBELETSO EA TŠEBELETSO EA DMX

• SR616 e tla tsoelapele ho romella likhoele tsa DMX ho boleng ba 0 ntle le kenyelletso ea DMX kapa ho se na litšoantšo tse sebetsang ho fapana le ho se be le tlhahiso ea lets'oao la DMX.

TŠEBELETSO EA 8 DMX TŠEBELETSO EA POTLAKO

• E fokotsa nako ea DMX interslot ho eketsa sekhahla sa phetisetso ea DMX.

HO LAOA KETSAHALO E KHETHEHILENG

• Nakong ea ts'ebetso e tloaelehileng, litšoantšo tse ngata li ka sebetsa ka nako e le 'ngoe. Matla a kanale bakeng sa liketsahalo tse ngata a tla kopana ka mokhoa o "boholo ka ho fetisisa".
• U ka etsa hore ketsahalo kapa liketsahalo tse ngata li sebetse ka mokhoa o ikhethileng ka ho li etsa karolo ea sehlopha se ikhethileng.
• Ho na le lihlopha tse 'ne tse ka hlophisoang. Haeba litšoantšo e le karolo ea sehlopha, ke ketsahalo e le 'ngoe feela sehlopheng e ka bang teng ka nako efe kapa efe.
• Liketsahalo tse ling (eseng karolo ea sehlopha seo) li ka ba teng ka nako e le 'ngoe le lihlopha tsa sehlopha.
• Ntle le haeba u tla beha sehlopha se le seng kapa tse peli tse bonolo tsa liketsahalo tse sa feteng u ka batla ho leka litlhophiso ho fumana litlamorao tse fapaneng.

HO BEA LIKETSAHALO HO BA KAROLO EA SEHLOPHA SE IKHETHENG KA THUTO (Mekhoutu ea Tshebetso 41 – 44)

• Kamora ho fihlella tšebetso (41 - 44) joalo ka ha e hlalositsoe ho HO FUMANA LE HO BEA MESEBETSI:

1. Mabone a liketsahalo a tla bontša hore na ke liketsahalo life tseo e leng karolo ea sehlopha. Sebelisa konopo ea BANK A/B ha ho hlokahala ho hlahloba libanka ka bobeli.
2. Sebelisa likonopo tsa ketsahalo ho fetola liketsahalo ho bula/ho tima sehlopha.
3. Sututsa REC ho boloka sehlopha se secha.

HO HLOMELA FADER ID (Mekhou ya Tshebetso 51-54)

• Ho ka sebelisoa liteishene tse 'maloa tsa fader ho fihlella li-block tsa liketsahalo tse fapaneng ho SR616. Sena se lumella ts'ebeliso ea liteishene tse fapaneng tse hole tse behiloeng ho linomoro tse fapaneng tsa ID tsa Architectural Unit, tseo hape li bitsoang "Fader ID" bukeng ena, ho laola libaka tse fapaneng tsa liketsahalo. Li-blocks tsa ketsahalo li entsoe ho sebelisoa mesebetsi ea Fader ID # le ho khetha sebaka sa pele sa block.
• Ka mor'a ho fumana mosebetsi oa Fader ID # (51-54) u sebelisa mehato e hlalositsoeng "HO FUMANA LE HO BEA MESEBETSI", matšoao a sebaka sa hona joale a tla khanya morao e le khoutu ea linomoro tse 'nè. Mehato e latelang e tla u lumella ho fetola maemo a hajoale.

1. Kenya nomoro ea ketsahalo eo u lakatsang ho e abela ho fader 1 seteisheneng sa AF e le nomoro ea linomoro tse 'ne.
2. Tobetsa konopo ea 'Record' ho boloka khetho ea hau

• Bakeng sa examptlase leqepheng la 4 le la 5, o ka ba le AF2104 e behiloeng ho Fader ID # 0. U ka seta AF2104 ho sebetsa liketsahalo 9-12 ka ho tobetsa REC, RECALL, 5, 1, RECALL, 0, 0, 0, 9 REC ho SR616. AC1109 e tla sebelisa lits'oants'o tsa 1-8 ho qala le ho tima, AF2104 e tla hopola le ho fifala setšoantšo sa 9-12.

TLHOKOMELISO TSOSOA TŠEBELETSO

• U SE KE UA etsa mosebetsi oa ho Seta Fektheri ho tsoa ho SR616 kaha o tla felisa mesebetsi e ikhethileng ho SR616.

TS'EBETSO

• SR616 e ikemela ka bo eona ha motlakase o sebelisoa ho tsoa phepelong ea motlakase ea kantle. Ha ho na konopo ea ON/OFF kapa konopo.
• Ha SR616 e sa sebetse, lets'oao la DMX le feptjoang sehokelong sa DMX IN (haeba le hokahane) le tsamaisoa ka kotloloho ho sehokelo sa DMX OUT.

DMX MOTS'EBI LESENYA

• Letšoao lena le fana ka lintlha tse latelang mabapi le kenyelletso ea DMX le matšoao a tlhahiso ea DMX.

1. OFF DMX HA E amoheloe. DMX HA E fetisoe. (Ha ho litšoantšo tse hlahang).
2. BLINKING DMX HA E amoheloe. DMX E ntse e fetisoa. (Ponahalo e le 'ngoe kapa tse ngata lia sebetsa).
3. HO DMX e ntse e amoheloa. DMX e ntse e fetisoa.

LEBAKA LEBAKA

SR616 e ka boloka lits'oants'o tse 16 tse entsoeng 'me ea li kenya tšebetsong ka ho tobetsa konopo. Litšoantšo li hlophisitsoe ka libanka tse peli (A le B). Ho fanoe ka konopo ea banka le letšoao bakeng sa ho fetola pakeng tsa libanka. Banka "B" e sebetsa ha lebone la BANK A/B le butswe.

TLALEHANG LETSATSI

• Sesebediswa sa taolo sa DMX se tlameha ho hokelwa le ho sebediswa ho bopa sebaka se tla bolokwa ho SR616.
• Sheba hore Scene Record Lockout e TIMA.

1. Theha ketsahalo u sebelisa li-fader tsa control console ho beha liteishene tse dimmer ho maemo a batloang.
2.  Khetha banka moo u batlang ho boloka ketsahalo.
3. Tšoara REC ho SR616 ho fihlela LED ea eona le mabone a sebaka a qala ho bonesa (hoo e ka bang 2 sec.).
4. Tobetsa konopo bakeng sa ketsahalo eo o batlang hore e rekotwe.
   • REC le mabone a liketsahalo li tla tima e leng se bontšang hore ho rekota ho phethiloe.
   • REC le mabone a ketsahalo a tla emisa ho benya kamora metsotsoana e ka bang 20 haeba u sa khethe ketsahalo.
5. Pheta mehato ea 1 ho isa ho 4 ho hatisa liketsahalo tse ling.

TS'EBETSO LEBAKA

• Ho bapala ha liketsahalo tse bolokiloeng ho SR616 ho tla etsahala ho sa tsotelehe ts'ebetso ea taolo kapa boemo. Sena se bolela hore lits'oants'o tse kentsoeng yuniting li tla eketsa kapa li "kopane" ho data ea seteishene ho tsoa ho khomphutha ea DMX.

TS'ELISO LEBAKA

1. Beha SR616 bankeng eo u e batlang.
2. Tobetsa konopo e amanang le sebaka seo u se batlang. Sebaka se tla nyamela ho latela litlhophiso tsa ts'ebetso ea nako ea fade.

• Leseli la sebaka le tla panya ho fihlela ketsahalo e fihla boemong ba eona bo felletseng. E tla be e ON. Ketso ea ho panya e ka emisoa ka khetho ea tlhophiso.
• Likonopo tse kenyang ketsahalo ke li-toggles. Ho tima ketsahalo e sebetsang - tobetsa konopo e amanang le eona.
• Ts'ebetso ea "scene" e ka ba "e ikhethang" (setšoantšo se le seng feela se ka bang teng ka nako) kapa "qubu ka" (litšoantšo tse ngata ka nako e le 'ngoe) ho latela khetho ea ts'ebetso ea ho seta. Nakong ea ts'ebetso ea "pile on" - litšoantšo tse ngata tse sebetsang li tla kopana ka mokhoa o "moholo ka ho fetisisa" mabapi le matla a mocha.

KONYANE TSAMA

• Konopo ea OFF e tima kapa e tima litšoantšo tsohle tse sebetsang. Lesupa la eona le sebetsa ha le sebetsa.

HOPOLANG QETELA

1. Konopo ea RECALL e ka sebelisoa ho nchafatsa ketsahalo kapa liketsahalo tse neng li le teng pele ho boemo ba OFF. Letšoao la RECALL le tla khanya ha memori e sebetsa. E ke ke ea khutlela morao letotong la liketsahalo tse fetileng.

TS'OANELO LE TOKA

HO BATLE PHOSO

1. Letšoao le nepahetseng la taolo la DMX le tlameha ho ba teng ho rekota ketsahalo.
2. Haeba ketsahalo e sa sebetse hantle - e kanna ea ngoloa ntle le tsebo ea hau.
3. Haeba o sa khone ho rekota liketsahalo - etsa bonnete ba hore khetho ea ho notlela rekoto ha e so butsoe.
4. Etsa bonnete ba hore lithapo tsa DMX le/kapa lithapo tsa remoutu ha li na phoso. E TLOAELEHANG BOTHATA MOHLOLI.
5. Etsa bonnete ba hore liaterese tsa fixture kapa dimmer li setiloe ho likanale tse lakatsehang.
6. Hlahloba hore na softpatch ea molaoli (haeba e sebetsa) e behiloe ka nepo.

TS'ELISO MOHAPI

• Mokhoa o motle oa ho lelefatsa bophelo ba SR616 ea hau ke ho e boloka e omme, e pholile, 'me e hloekile.
• KHAOTSA yuniti ka ho felletseng pele o hloekisoa 'me u netefatse hore e omme ka ho felletseng pele o kopana hape.
• Karolo e kantle e ka hloekisoa ka lesela le bonolo dampe kentsoeng ka motsoako o bobebe oa sesepa / metsi kapa mochini o hloekisang oa mofuta o bobebe. U SE KE U TLOSA AEROSOL KAPA MOLELEKI O EFE KAPENG yuniti ka kotloloho. U SE KE UA NOA yuniti ka har'a mokelikeli ofe kapa ofe kapa ho lumella mokelikeli ho kena taolong. U SE KE UA SEBELISA lihloekisi life kapa life tse thehiloeng ho solvent kapa abrasive yuniti.

LITS'ELISITSOE

• Ha ho na likarolo tse sebelisoang ke basebelisi yuniti. Ts'ebeletso e etsoang ke ba bang ntle le baemeli ba lumelletsoeng ba Lightronics e tla hlakola waranti ea hau.

THUSO EA HO SEBELISA LE TLOBELO

• Basebeletsi ba feme ea barekisi le ba Lightronics ba ka u thusa ka mathata a ts'ebetso kapa a tlhokomelo. Ka kopo bala likarolo tse sebetsang tsa bukana ena pele u kopa thuso.
• Haeba tšebeletso e hlokahala - ikopanye le morekisi eo u rekileng unit ho eena kapa ikopanye le Lightronics, Service Dept., 509 Central Drive, Virginia Beach, VA 23454 TEL: 757-486-3588.

TSEBISO EA TIISETSO LE HO INGOLISA - TLANYA LINK KA KA tlase

• www.lightronics.com/warranty.html

SR616 TŠEBELETSO EA THUTO

www.lightronics.com

Litokomane / Lisebelisoa

LIGHTRONICS SR616D Molaoli oa Mehaho [pdf] Buka ea Mong'a SR616D, SR616W, SR616D Taolo ea Meralo, Molaoli oa Mehaho, Molaoli

Litšupiso

• Bukana ea Mosebelisi