Setsebi sa Alchemist
FLUX:: Ka ho teba
2023-02-06

Alchemist - Khopolo ea Alchemist

Leqephe la Sehlahisoa | Leqephe la Lebenkele

Qalong, lets'oao la wideband le arotsoe ka lihlopha tsa maqhubu ka moseho o feto-fetohang oa letsoapo.
Sehlopha se seng le se seng se sebetsoa ka bonngoe bakeng sa matla. Bakeng sa sehlopha se seng le se seng sa frequency, karolo e 'ngoe le e' ngoe ea ts'ebetso e matla, compressor, de-compressor, expander le de-expander e na le jenereithara ea eona ea envelop ho kenyelletsa Dynamic Ratio, Peak amount parameters, LID (Level independent Detector) le tokiso ea eona ea moeli. Bakeng sa sehlopha se seng le se seng sa frequency, mookameli oa nakoana a ka kenngoa pre or post dynamic processing. Ho fihlella taolo e felletseng ho lets'oao la molumo, taolo ea MS e fumaneha sehlopheng se seng le se seng sa frequency.
Ebe lihlopha tsohle tsa maqhubu li akaretsoa ho aha lets'oao le sebetsitsoeng le pharaletseng. Sekoti se bonolo se nang le monyako bakeng sa lengole le bonolo, le taolo ea motsoako o omileng lia fumaneha.
Alchemist e bokella ka har'a plug-in ea mahlale ohle a Flux mabapi le ho sefa le ho sebetsa ka matla.

Litlhophiso tse Akaretsang le Pontšo

Karolo ena e laola boitšoaro ba sehlopha se pharaletseng sa plug-in ea Alchemist. E boetse e laola palo ea sehlopha sa ts'ebetso (27) le khetho ea sehlopha sa ho beha sehlopha (22).

2 Litlhophiso tse akaretsang
2.1 Kenyeletso (1)
yuniti: dB
Boleng Range: -48 / +48
Mohato: 0.
Boleng ba kamehla: 0 dB
E beha phaello e kentsoeng tšebetsong e matla.
2.2 Dry Mix (2)
Boleng ba kamehla: -144 dB
Selaete sena se laola palo ea lets'oao la mantlha le ka eketsoang molumong o hlophisitsoeng.
Karolo ena e nehetsoe ho tseba mesebetsi e hlokang ts'ebetso e boima le taolo e poteletseng.
Motsoako o etsoa pele tlhahiso e fumana.
2.3 Phaello (3)
yuniti: dB
Boleng Range: -48 / +48
Mohato: 0.
Boleng ba kamehla: 0 dB
E beha phaello ea lefats'e e sebelisoang ho tlhahiso e matla ea ts'ebetso pele ho clipper e bonolo.
2.4 Mokhahlelo oa ho Fetolela (4)
Boleng ba kamehla: Koala
Ha konopo ena e kentsoe, mohato oa lets'oao le sebetsitsoeng oa khelosoa.
2.5 Numella Clipper (5)
Clipper ke s ea ho qetela haholotage ea ketane ea ho sebetsa.
2.6 Clipper Knee (6)
yuniti: dB
Boleng bo fapaneng: 0 / +3
Mohato: 0.
Boleng ba kamehla: 1 dB
E beha boreleli ba phetiso ea phetiso.
2.7 Clipper Ceiling (7)
2.8 Bypass (8)
Ke tsela ea lefatše ka bophara.
2.9 Sekhetho sa Ts'ebetso ea Channel (9)
Ha o sebetsa libese tse nang le likanale tse ngata (tse pota-potileng), liteishene tsohle li sebetsoa ka mokhoa o ikhethileng, empa ho ka ba molemo ho tlosa liteishene tse ling ts'ebetsong ka mabaka a itseng. Mokhethi ona o lumella ho boloka likanale tse sa hlahlojoang li sa angoa. Karolo ena e ka sebelisoa haeba ho hlokahala litlhophiso tse fapaneng. Mehato e mengata ea plug-in e ka sebelisoa ka lihlopha, e 'ngoe le e' ngoe e sebetsana le mocha o itseng ka litlhophiso tsa eona.
2.10 Channel Side Chain Routing (10)
Ha o sebetsa ka libese tse nang le likanale tse ngata, likanale kaofela li fepa ketane ea mahlakoreng ka mokhoa o ikhethileng, empa ho ka ba molemo ho thibela likanale tse ling ho fepa ketane ea mahlakore ka mabaka a mang.
2.11 Mokhethi oa Sehlopha (11)
Khetho ea sehlopha sa maqhubu e etsoa mona.
E ka boela ea etsoa ho tloha sebakeng se seholo sa pontšo.
2.12 Palo ea Taolo ea Sehlopha (12)
Likonopo tsa Minus le Plus li lumella ho hlakisa palo ea lihlopha tsa khafetsa tsa Alchemist ho tloha ho 1 ho isa ho 5.
2.13 Khutlisa Solo (13)
Konopo ena e tima 'mino o le mong oa 'mino o le mong.

Pontsho e Akaretsang

Windows:
Tobetsa ka ho le letona sehlopheng se khethiloeng ho fihlella lenane le itseng la maemo le lumellang ho seta li-band bocha kapa ho kopitsa liparamente tsa sehlopha ho sehlopha se seng. Karolo ea Auto Solo e ka fumaneha ha u tobetsa konopo ea Ctrl + Tobetsa ho sehlopha seo u se batlang.
MacOS:
Tobetsa ka ho le letona kapa Ctrl + Tobetsa ho sehlopha se khethiloeng se fihlella lethathamong le ikhethileng le lumellang ho seta li-band kapa ho kopitsa liparamente tsa sehlopha ho sehlopha se seng. Karolo ea Auto Solo e ka fumaneha ha u tobetsa konopo ea Taelo (Apple) + Tobetsa ho sehlopha seo u se batlang.
3.1 Input Peak Meter (14)
3.2 Output Peak Meter (15)
3.3 Khokahanyo ea ponts'o (16)
Lihlopha li ka kopanngoa le li-parameter tsa tsona. Tobetsa ka ho le letona skrineng e kholo e u lumella ho fihlella lenane la maemo. Ho fetola litlhophiso tsa sehlopha se hoketsoeng ho boetse ho fetola litlhophiso tsena bakeng sa lihlopha tsohle tse hokahaneng.
3.4 Band Gain Handle (17)
Pontšo ea sehlopha e bonts'a melemo ea ho kenya le ho tsoa.
Motsoako o fokotsa phaello ea tlhahiso.
Shift + Click e fokotsa phaello ea ho kenya.
Penya habeli ho khutlisetsa phaello ho boleng ba kamehla.
3.5 Band Frequency Handle (18)
Shift + Click e thusa ho fokotsa hantle
Tlanya ka ho le letona e fetola moepa oa sefe
Penya habeli e seta bocha maqhubu ho ea ho boleng ba kamehla.
3.6 Global Band Handle (19)
Penya habeli e seta bocha maqhubu ho ea ho boleng ba kamehla.
Ctrl + Tobetsa auto-solos sehlopha se khethiloeng.
3.7 Ketsahalo ea Sehlopha (20)
E bonts'a phaello e sebelisitsoeng empa hape e ela hloko phetoho ea phaello e hlahisitsoeng ke karolo ea Bitter Sweet.
3.8 Maqhubu a Sefe ea Low Pass (21)
Boleng bo ka kenngoa ho sebelisoa keyboard kapa taolo ea li-slider.
Ho hula li-hand handles hoa khoneha hape ho tsoa ponts'ong e kholo.
3.9 Moepa oa Sefe ea Tlase (22)
Boleng bo ka kenngoa ho sebelisoa keyboard kapa taolo ea li-slider.
Shift + Ho hula maqhama a sehlopha ho ka khoneha hape ho tsoa ponts'ong ea mantlha.
3.10 Hi Pass Filter Slope (23)
Boleng bo ka kenngoa ho sebelisoa keyboard kapa taolo ea li-slider.
Shift + Ho hula maqhama a sehlopha ho ka khoneha hape ho tsoa ponts'ong ea mantlha.
3.11 Maqhubu a Sefe ea Hi Pass (24)
Boleng bo ka kenngoa ho sebelisoa keyboard kapa taolo ea li-slider.
Ho hula li-hand handles hoa khoneha hape ho tsoa ponts'ong e kholo.
3.12 Phihlello ea Motsamaisi oa Pele (25)
Ho fihlella fensetere ea mookameli ea seng a setiloe.
3.13 Pontšo e kentsoeng esale pele (26)
Naleli e bontša setaele se fetotsoeng.
3.14 Boloka (27)
Save e nka sebaka sa e seng e khethiloe ka e ncha tlasa lebitso le tšoanang le nang le li-setting tsa hajoale. Haeba u batla ho boloka setaele se seng se ntse se le teng ntle le liphetoho tsa hau tse ncha, khetha feela sebaka se se nang letho lethathamong le seng le setiloe, kenya lebitso le lecha bakeng sa setaele sena se fetotsoeng se nang le li-setting tsa hajoale ebe o tobetsa Boloka.
3.15 Hopola (28)
Hang ha setlhophiso e se e khethiloe lethathamong le behiloeng esale pele e tlameha ho kenngoa ka ho hlaka karolong ea A kapa karolo ea B ka ho sebelisa konopo ea ho hopola. Seta esale pele se sebetsa feela ka mor'a hore se hopolehe.
3.16 Kopitsa A / Kopitsa B (29)
Litekanyetso tsa hona joale tsa karolo li kopitsoa ho e 'ngoe. Karolo ea A kapa B e qalisoa bocha ka boleng ba hona joale 'me morphing slider e emisitsoe ho 100% ea karolo e lumellanang.
3.17 Morphing Slider (30)
Selaete sena se otlolohileng ha se na bonngoe kapa pontšo ea boleng bo khethehileng. E lumella ho fetola litlhophiso tsa hajoale lipakeng tsa li-presets tse peli tse jarollotsoeng. Tobetsa habeli ka lehlakoreng le leng la sebaka sa slider se fetoha lipakeng tsa A le litlhophiso tse felletseng tsa B.
Liphetho tsa li-setting tse lipakeng li ka bolokoa joalo ka seta e ncha.
Tlhophiso ea lefatše ka bophara e kenyelletsang li-preset tse peli tse jarollotsoeng le boemo ba morphing slider le tsona li ka bolokoa ho tsoa fensetereng ea taolo e seng e setiloe.
3.18 Taolo ea Boiketsetso ea Morphing Slider (31)
Boleng ba kamehla: Koala
Ha konopo ena e holofetse, litekanyetso tsohle tsa plug-in li ngotsoe ha u ngola othomathike. The morphing slider e hlokomolohuoa.
Ha u bala li-automation, haeba konopo ena e koetsoe, li-parameter tsohle tsa plug-in li laoloa ke mochine o sebetsang ntle le morphing slider.
Ha konopo ena e kentsoe, liparamente tsohle lia rekota ha ho ngoloa othomathike ho sa kenyeletsoe morphing slider.
Ha konopo ena e sebetsa, FEELA boleng ba morphing slider bo sebelisoa ha u bala othomathike.
Konopo ea Automation e tlameha ho sebelisoa haeba morphing slide e tlameha ho etsoa 'mapa sebakeng sa taolo.

Litlhophiso tsa Bands le Pontšo

Likarolo tse kholo tsa sehlopha li bokelloa holim'a phanele ena. Alt + Tobetsa ho tlosa taolo ka nakoana ha sehlopha se hokahane.

4 Li-setting tsa sehlopha
4.1 Sehlopha Sa Solo (32)
Solo sehlopha kapa lihlopha tse khethiloeng
4.2 Khopotso ea Sehlopha se Khethiloeng (33)
4.3 Band Bypass (34)
Fetola sehlopha se khethiloeng.
4.4 Khokahanyo (35)
Kamehla: E lumelletsoe
Ka nako e sa lekanyetsoang boleng bo phahameng bo fanoeng ho tsoa likanaleng tsohle tse fepang ketane ea mahlakoreng bo bolokoa e le mohloli oa ho sebetsa. Ka tsela ena, tlhahisoleseling ea sebaka e bolokiloe bakeng sa mats'oao a likanale tse ngata tse sebelitsoeng.
Ha e holofalitsoe, mocha o mong le o mong o sebelisa boleng ba ona bakeng sa ts'ebetso ea motho ka mong. Tlhophiso ena e ka sebelisoa hammoho le karolo ea bophara ba MS e kenyang lets'oao ho MS pele e sebetsa, 'me e lekola tlhahiso. Ka tsela ena, lets'oao la M le ka sebetsoa ha le ntse le boloka mocha oa S o sa angoa.
4.5 Kenyeletso (36)
yuniti: dB
Boleng Range: -12 / +12
Mohato: 0.01
Boleng ba kamehla: 0 dB
E beha phaello e sebelisitsoeng molemong oa ts'ebetso e matla ea sehlopha se khethiloeng.
4.6 Phaello (37)
yuniti: dB
Boleng Range: -12 / +12
Mohato: 0.01
Boleng ba kamehla: 0 dB
E beha phaello ea lefats'e e sebelisoang ho tlhahiso e matla ea ts'ebetso ea sehlopha se khethiloeng.
4.7 Bitter Sweet On/Off (38)
Ha ba lebeletsane, Bitter Sweet process e sebetsa.
4.8 Chelete ea Nakoana (39)
Yuniti:%
Boleng Range: -100 ho +100
Boleng ba kamehla: 0
Ka lehlakoreng la Monate (ka ho le letšehali), li-transients lia fokotseha. Hangata e fokotsa liletsa tsa percussive motsoakong.
Ka lehlakoreng la Bitter (ka ho le letona), li-transients lia holisoa. Hangata e eketsa liletsa tsa percussive motsoakong.
4.9 Post Band Processing (40)
Ha ho kopanetsoe, Bitter Sweet process e etsoa kamora ts'ebetso e matla. Ho seng joalo, e etsoa pele ho likarolo tse ling tsa ts'ebetso tse sebetsang ka ho tšoana.
4.10 Puseletso ea Boiketsetso (41)
Ha motho a kopanela, phaello ea lihlahisoa e lefshoa ho itšetlehile ka chelete ea nakoana ho hlahisa phaello e batlang e lekana.
4.11 Bitter Sweet Sustain Release (42)
Taolo ena e beha nako ea tokollo bakeng sa enfelopo ea nakoana.
4.12 Sekhethi sa Mokhoa oa Ts'ebetso (43)
Mekhoa ea mantlha e sebelisang sekema sa lets'oao le tloaelehileng la stereo mme ke eona feela mokhoa o fumanehang bakeng sa ts'ebetso ea li-multichannel. Setsi se sebelisa encoder ea kahare ea MS mme se sebetsa feela mocha oa Mid. Kamora ho sebetsa, molumo o khutlisetsoa ho stereo. Kaha mocha oa M hangata o na le enregy ho feta mocha oa S, mokhoa ona o lumella ho laola habonolo tšusumetso ea molumo.
Stereo e kenya encoder ea ka hare ea MS mme e sebetsa feela mocha oa Side. Kamora ho sebetsa, molumo o khutlisetsoa ho stereo. Kaha mocha oa S o na le tlhahisoleseding ea sebaka, mokhoa ona o lumella ho laola habonolo litšoantšo tsa stereo.
4.13 Bitter Monate Nako (44)
Yuniti: ms
Phaello ea Boleng: 3 ho 450 ms
Boleng ba kamehla: 42 ms
Taolo ena e beha sebaka sa fensetere ea nako e sebelisoang ho bona nako ea nakoana e tla sebetsoa.
4.14 MS Width Control (45)
yuniti: dB
Boleng Range: -6 / +6
Mohato: 0.01
Boleng ba kamehla: 0
E beha bophara ba stereo ea lets'oao le sebetsitsoeng. Boleng ba A -6 dB bo fokotsa bophara ba stereo. Boleng ba +6 dB bo eketsa bophara ba motsoako oa stereo empa bo ka hlahisa taba ea mohato.
4.15 MS Mode On/Off (46)
Boleng ba kamehla: Koala
E nolofalletsa matrix a khouto ea MS ho kenyeletsoa le matrix a decoding a le mong tlhahisong ea tšebetso e matla molemong oa ho laola bophara ba stereo ea motsoako. Ha ho kopanetsoe, ketane ea mahlakoreng e fepeloa ke lets'oao le kentsoeng la MS le hlahang karolong ea ponts'o. Kanale ea M e tsamaisana le kanale e tloaelehileng e ka letsohong le letšehali. 'Me mocha oa S o lumellana le mocha o tloaelehileng o nepahetseng Tšobotsi ena e fumaneha feela ha likanale tse peli (ha ho sa le joalo, ha ho tlase) li sebetsoa.

5 Litlhophiso tse Amanang le Nako
5.1 Tieha (47)
Yuniti: ms
Phaello ea Boleng: 0 ho 50.0 ms
Boleng ba kamehla: 0 ms
Ho lieha ho bonahatsa nako ea tlhaselo ho ka kenngoa tseleng ea matšoao e le ho hlahisa nako ea tlhaselo ea zero bakeng sa ts'ebetso e matla. Ho fetola boleng ba ho lieha ho tloha nakong ea tlhaselo ho lumella ho laola nako e khutšoanyane. Theko ea ho lieha e ka tlase ho boleng ba tlhaselo e etsa hore litlhoro li se ke tsa angoa ke ts'ebetso.
Hlokomela
Hlokomela hore litheko tse fapaneng tsa tieho tsa sehlopha se seng le se seng li lefshoa ka bo eona. Solera e ke ke ea sebelisoa ho hlahisa litlamorao tse khethehileng tsa tieho.
Tlhokomediso
Tlhokomeliso: Morphing lipakeng tsa li-presets tse nang le boleng bo fapaneng ba tieho e hlahisa li-arefacts tsa molumo.
Ehlile tieho ena e hlahisa latency ts'ebetsong.
5.2 Ho lieha ha Auto (48)
Boleng ba kamehla: Koala
Ha e lumelletsoe, boleng ba tieho bo hokahanngoa le boleng ba tlhaselo. Hlokomela hore latency e hlahisitsoeng ke ts'ebetso ena e se e lekana le nako ea hau ea tlhaselo e qoelitsoeng ke 2.
5.3 Mokhoa (49)
Boleng ba kamehla: Solera
Ho na le mekhoa e 8 e fapaneng ea ho lemoha: - Solera: The Attack setting e boetse e laola nako ea ho kopanya bakeng sa ho lemoha RMS. Ha "Auto" e sebetsa bakeng sa boleng ba ho lieha, nako ea tlhaselo e hlahisoang ke zero. - Solera Feed Backward: Setlhophiso sa Attack se boetse se laola nako ea ho kopanya bakeng sa tlhahlobo ea RMS e etsoang ka tlhahiso ea processor. Mokhoa ona o tima tšobotsi ea Delay. Hape hlokomela hore Solera Feed Backward e thibela ho sebelisa ketane e ka ntle ea lehlakore hobane ke lets'oao le sebetsitsoeng le fepang ketane ea lehlakore. - Ka potlako ea khale: Nako ea ho kopanya bakeng sa ho fumanoa ha RMS ke 10 ms ntle le kamano e tobileng le maemo a Attack. Empa ha "Auto" e sebetsa bakeng sa boleng ba ho lieha, nako ea tlhaselo e hlahisoang ke zero. - Classic Medium: Nako ea ho kopanya bakeng sa ho fumanoa ha RMS ke 40 ms ntle le kamano e tobileng le boemo ba Attack. Empa ha "Auto" e sebetsa bakeng sa boleng ba ho lieha, nako ea tlhaselo e hlahisoang ke zero. - Classic Butle-butle: Nako ea ho kopanya bakeng sa ho fumanoa ha RMS ke 80 ms ntle le kamano e tobileng le maemo a Attack. Empa ha "Auto" e sebetsa bakeng sa boleng ba ho lieha, nako ea tlhaselo e hlahisoang ke zero. Classic Feed Back Back Fast: Nako ea ho kopanya ke 10 ms bakeng sa ho lemoha RMS e etsoang ka tlhahiso ea processor. Mokhoa ona o tima tšobotsi ea Delay. Hape hlokomela hore mokhoa oa Feed Backward o thibela ho sebelisa ketane e ka ntle hobane ke lets'oao le sebetsitsoeng le fepang ketane ea lehlakore. - Classic Feed Backward Medium: Nako ea ho kopanya ke 40 ms bakeng sa tlhahlobo ea RMS e etsoang ka tlhahiso ea processor. Hape hlokomela hore mokhoa oa Feed Backward o thibela ho sebelisa ketane e ka ntle hobane ke lets'oao le sebetsitsoeng le fepang ketane ea lehlakore. - Classic Feed Backward Butle: Nako ea ho kopanya ke 80 ms bakeng sa ho lemoha RMS e etsoang ho tsoa ho processor. Hape hlokomela hore mokhoa oa Feed Backward o thibela ho sebelisa ketane e ka ntle hobane ke lets'oao le sebetsitsoeng le fepang ketane ea lehlakore. Mekhoa ena ea Fepa Backward e bululetsoe ke vintage hardware meralo. ba theha mofuta oa taolo ea koloi ea ts'ebetso e hlahisang molumo o monate oa tlhaho.
5.4 Tlhaselo (50)
Yuniti: ms
Boleng bo fapaneng: 0 ms ho 100 ms
Boleng ba kamehla: 0.0 ms
E beha nako ea tlhaselo ea enfelopo ea ts'ebetso. E boetse e laola tsela eo boleng ba RMS bo baloang ka eona ho tsoa ho lets'oao le kenang.
Tlhokomediso
Tlhokomediso : Boemo ba Tlhaselo bo boetse bo laola nako ea ho kopanya bakeng sa ho lemoha RMS.
5.5 Tšoara (51)
Yuniti: ms
Boleng bo fapaneng: 0 ms / 500 ms.
Boleng ba kamehla: 0 ms
Paramethara ena ke eona feela maemong a amanang le nako, e ikemetseng ka processor e matla. Compressor le expander li ka ba le nako e fapaneng ea ho ts'oara.
E sebelisoa karolong ea Expander, boemo bona bo lumella lipina tsa meropa tse nepahetseng haholo. E ka boela ea sebelisoa molemong oa boiqapelo likarolong tse ling tse matla.
5.6 Mokhoa oa ho lokolla (52)
Boleng ba mantlha: Auto
Mekhoa e meraro ea tokollo e fumaneha bakeng sa envelop ea ts'ebetso e matla. - Bukana e tsamaisana le boleng boo u bo behileng. - Auto e thusa algorithm ea rona e ikhethileng ho hlahisa boleng bo itšetlehileng ka lets'oao ho qoba litlamorao tse tloaelehileng tsa ho pompa. - E tsoetseng pele e fana ka phihlello ea litekanyetso tse peli tse fapaneng bakeng sa tokollo le taolong ea lebelo la liphapang lipakeng tsa boholo le boleng bo tlase ba tokollo.
5.7 Phatlalatso (53)
Yuniti: ms
Boleng bo fapaneng: 0.67 ms / 10000.00 ms
Boleng ba kamehla: 500.00 ms
E beha boleng ba tokollo ka letsoho le boleng bo holimo ba tokollo ha o le Moeeng o Tsoetseng Pele.
5.8 Bonyane Bonyane (54)
Yuniti: ms
Phaello ea Boleng: 0.67ms / 5000.00
Mohato: 0.01
Boleng ba kamehla: 1.30 ms
E beha bonyane ba boleng ba tokollo ha o le Moeeng o Tsoetseng Pele.
5.9 Ntho e Matla (55)
Yuniti: x
Boleng bo fapaneng: 0 / 3.0
Mohato: feto-fetoha.
Boleng ba kamehla: 1
Amphlakisa kapa ho fokotsa tlhahisoleseling e matla ea nako ea nnete.
5.10 Lebelo le Matla (56)
Yuniti:%
Boleng bo fapaneng: 10 / 1000
Mohato: 1
Boleng ba kamehla: 50%
E beha lebelo la phapano ho litaba tse matla.

6 Band Display
6.1 Metara wa Boemo ba ho Kena (57)
Vu-meter ha se peak-meter, e lebisitsoeng ho -16 dB Fs ka ho sa feleng, ka sekala sa auto ho ipapisitsoe le litekanyetso tsa moeli. Ha karolo ea MS Width e sebetsa, boemo ba M (Bohareng) bo bonts'oa methareng e letšehali. S (Lehlakore) e bonts'oa methareng e nepahetseng.
Lenane le letala le bonts'a boleng ba moeli.
6.2 Output Level Meter (58)
Vu-meter ha se peak-meter, e lebisitsoeng ho -16 dB Fs ka ho sa feleng, ka sekala sa auto ho ipapisitsoe le litekanyetso tsa moeli. Ha karolo ea MS Width e sebetsa, boemo ba M (Bohareng) bo bonts'oa methareng e letšehali. S (Lehlakore) e bonts'oa methareng e nepahetseng.
6.3 Enfelopo ea Sephetho (59)
Vu-metara eseng peak-meter, e supang -16 dB Fs ka ho sa feleng.
Sekala ke +/- 12 dB.
Ena ke enfelopo ea kakaretso ea compression, decompression, expander le de-expander.
Pontšo ena ha e bontše ka kotloloho liphetoho tsa phaello tse hlahisitsoeng ke karolo ea Bitter Sweet e ka beoang li-processor tsa pele kapa tsa poso tse tšoanang.
6.4 Phapano e matla lipakeng tsa ho kena le ho tsoa (60)
Vu-metara eseng peak-meter, e supang -16 dB Fs ka ho sa feleng.
Sekala ke +/- 12 dB.
Pontšo ena ha e bontše ka kotloloho liphetoho tsa phaello tse hlahisitsoeng ke karolo ea Bitter Sweet e ka beoang li-processor tsa pele kapa tsa poso tse tšoanang.
6.5 Phapang ea maemo lipakeng tsa ho kena le ho tsoa (61)
Vu-metara eseng peak-meter, e supang -16 dB Fs ka ho sa feleng.
Sekala ke +/- 12 dB.
Ena ke khanyetso, decompression, expander le de-expander summing envelop eo hape e nkang tlaleho ea ho kenya letsoho le phaello ea sehlopha.
Pontšo ena ha e bontše liphetoho tsa phaello tse hlahisitsoeng ke karolo ea Bitter Sweet.
Ketso ea Bitter Sweet e ka bonoa skrineng e kholo.
6.6 Pontšo ea Ts'ebetso e Matla (62)
Ha ho sekala
Boleng ba hona joale ba LID Threshold bo bonahala ka mela e 'meli e tala ho ponts'o ea Dynamic Activity.
Bakeng sa likarolo tsa Compressor le DCompressor, ketso ea LID e sebetsa feela ha orange Dynamic Activity e feta sebaka se pakeng tsa mela e 'meli e tala.
Bakeng sa likarolo tsa Expander le DExpander, ketso ea LID e sebetsa ha feela orange Dynamic Activity e lula ka hare ho sebaka se pakeng tsa mela e 'meli e tala.
6.7 Boleng ba Tokollo ea Hang-hang (63)
Auto Scale ho latela boleng ba tokollo
6.8 Sephetho sa Phetisetso Curve (64)
Auto Scale ho ipapisitsoe le litheolelo

Litlhophiso le Pontšo ea Likarolo tse Matla

Sehlopha se seng le se seng se na le likarolo tse 'ne tse sebetsang li tsamaisana.
Alt + Tobetsa ho tlosa taolo ka nakoana ha sehlopha se hokahane.

7 Litlhophiso tsa Likarolo tse Matla
7.1 Tlhōrō ea Tlhōrō ea Chelete (62)
Yuniti:%
Boleng bo fapaneng: 0 / 100
Mohato: 1
Boleng ba kamehla: 0 %
Peresentetage ea boleng ba tlhōrō ea hang-hang e sebelisetsoang ho fepa karolo ea sethuthuthu, ho etsa hore ts'ebetso e matla e amehe haholoanyane ho li-audio transients.
0 % e bolela 100 % letshwao la RMS le fepa karolo ya sesupa; 100 % e bolela hore ke lets'oao le phahameng feela le fepang karolo ea detector. 50 %= mashome a mahlano - mashome a mahlano
7.2 Dynamic Ratio (63)
Yuniti:%
Boleng bo fapaneng: 0 / 100
Mohato: 1
Boleng ba kamehla: 0 %
Tlhophiso ena e khutlisa karo-karolelano e sebelisoang karolong ea processor ha lets'oao le bonoeng le phahama.
Tlhophiso ena e bula molumo ka mokhoa o hlakileng, e eketsa ts'ebetso e ts'oanelang 'me e boloka moea o itseng ka ho fetola ka nako ea nnete karo-karolelano ea karolo e' ngoe le e 'ngoe ea ts'ebetso e matla mabapi le litlhophiso tsa bona tsa hajoale mabapi le karolelano le dikahare tsa lets'oao (haholo-holo mefuta e fapaneng). Ho qala ho utloisisa tlhophiso ena le ho e utloa habonolo, nka moqomo o kopantsoeng ka botlalo kapa motsoako o felletseng le meropa ea punchy, beha moeli oa khatello, karo-karolelano ea ho fumana ntho e haufi le ho pompa kapa khatello e matla.
Ebe o eketsa phaello ho lefella phaello e lahlehileng ebe o fetola pakeng tsa 0 le 100% ea Dynamic Ratio. Ho 100 % o lokela ho utloa moea o mongata molumong, oa nakoana le oa khatello e fokolang; haholo mabapi le tlhaselo.
7.3 Dynamic Ratio Inverter (63)
Ha ba kopanela, boitšoaro ba Dynamic Ratio boa khelosoa. Boleng ba karo-karolelano bo ea eketseha ho ipapisitsoe le matla a lets'oao le bonoeng.
7.4 LID. (Mohloli o Ikemetseng oa boemo) (64)
Yuniti:%
Boleng bo fapaneng: 0 / 100
Mohato: 1
Boleng ba kamehla: 0 %
E lumella ho sebetsana le lets'oao la molumo ntle le boemo ba molumo empa mabapi le mefuta e fapaneng ea matla. E kopantsoe le mokhoa o tloaelehileng oa compression.
Nka sengoathoana sa 'mino o tsoakiloeng ka botlalo, beha karo-karolelano ho 3-4 mme khatello e tla qala ho sebetsa. Joale beha monyako oa compressor ho boleng bo phahameng, compressor e tla emisa ho sebetsa hobane molumo oa molumo o ke ke oa fihla monyako. Ebe o eketsa LID. 'me u tla bona (le ho utloa) compression e sebetsa hape !!! Joale fokotsa kapa eketsa phaello ea ho kenya (ho Solera kapa pele, kamoo u batlang) 'me u tla bona hore khatello e tla tsoela pele ho sebetsa ka ho lekana; e ikemetse ka botlalo, e ikemetse ka botlalo holima boemo ba molumo mme e its'etleha feela ka Karolelano, Knee le litaba tsa molumo. See se ka sebelisoa joang? Ha o na le molumo o matla haholo, ho ea mohlala ho tloha ho -3, -6 dB Vu (kapa ka tlase) ho ea ho +12 dB; Haeba u batla ho hatella maemo a tlaase u tla utloa molumo oa "pumping" ha molumo o fihla Maemo a Phahameng 'me ntho e le' ngoe feela e lokelang ho etsoa ka compressor e tloaelehileng e tla ba ho eketsa monyako ho pholosa moea o itseng oa molumo. Empa ha o etsa joalo, compressor e ke ke ea hlola e sebetsa maemong a tlase, 'me u tla utloa liphapang tsa molumo (ka nako e telele, sebaka se phelang, lijo-thollo joalo-joalo ...) haholo-holo ha konpresser e qala ho sebetsa. Ka Solera LID., fetola moeli le karo-karolelano maemong a Phahameng ho ea ho seo u nahanang hore se lokile, ebe u eketsa LID. (ho tloha ho 20 ho ea ho 50%) 'me u mamele hona joale maemo a tlaase' me haholo-holo phetoho pakeng tsa maemo a tlaase le a Phahameng. U ka boela ua qala ho eketsa karo-karolelano ho eketsa phello. U tla hlokomela hore compression e tla lula e sebetsa empa e ntse e khona ho hlokomela maemo a Phahameng, a lerata (ntle le haeba u seta 100% LID.) 'me e etse hore compression e be boreleli haholo 'me e se hlole e pompa ... Ho phaella ka ts'ebetso ea Dynamic Ratio, o tla khona ho beha enfelopo ea kamehla le ea tlhaho haholo e lumellang ho eketsa maemo a tlase, maqhubu a tlase le ho boloka li-transients tsa bohlokoa.
7.5 LID. Moeko (65)
E beha sebaka sa phaello ea parameter ea LID. - Holimo: Keketseho ea ts'ebetso ea LID - Ho theoha: Ho fokotseha ha ketso ea LID
Boleng ba hona joale ba LID Threshold bo bonahala ka mela e 'meli e tala ho ponts'o ea Dynamic Activity.
Hlokomela
Bakeng sa likarolo tsa Compressor le DCompressor, ketso ea LID e sebetsa feela ha orange Dynamic Activity (18) e feta sebaka se pakeng tsa mela e 'meli e tala. Bakeng sa likarolo tsa Expander le DExpander, ketso ea LID e sebetsa ha feela orange Dynamic Activity (18) e lula ka hare ho sebaka se pakeng tsa mela e 'meli e tala.
7.6 LID Maximum (66)
Ha e kopanetsoe, moeli oa ts'ebetso o khethoa ke litekanyetso tse phahameng ho tloha ho RMS / tlhōrō ea tlhōrō OR ho tloha ho lemoha ka matla. LID Threshold e ntse e sebetsa, empa konopo ea LID mix e koetsoe. Karolo ena e lumella ts'ebetso eohle hore e sebetse haholoanyane ho litaba tsa matšoao. Ho bohlokoa ho lekoa lipina tsa meropa.
7.7 Moeko (67)
yuniti: dB
Boleng bo fapaneng: -32 ho +16 (Compressor/DCompressor) -80 ho +16 (Expander/DExpander)
Boleng ba kamehla: 0
E beha moeli oa karolo e itseng ea ts'ebetso e matla. Sekala sena sa dB se bolela boleng ba RMS.
Boleng bo sebetsang ba monyako bo fetotsoe ke LID, LID Threshold le, li-setting tsa LID Maximum.
7.8 Karolelano (68)
yuniti: dB
Phaello ea Boleng: 1 ho isa ho 10
Mohato: 0.01
Boleng ba kamehla: 1
E beha karo-karolelano ea karolo e itseng ea ts'ebetso e matla.
Karolelano ea boleng bo sebetsang e fetotsoe ke palo ea Dynamic Ratio.
7.9 E sa feleng (69)
E beha karo-karolelano ho boleng ba eona bo ka khonehang.
7.10 Range (70)
yuniti: dB
Boleng bo fapaneng: 0 ho 48/140/24/16 (Compressor/Expander/DCompressor/DExpander)
Boleng ba kamehla: 24/96/12/
E beha phapang e kholo e lumelletsoeng ea phaello bakeng sa karolo e itseng ea ts'ebetso e matla.
7.11 Mangole (71)
yuniti: dB
Boleng bo fapaneng: 0 / +24
Boleng ba kamehla: 0
E beha boreleli ba phetisetso curve bakeng sa karolo e itseng ea ts'ebetso e matla. Mokokotlo o boreleli ho potoloha boleng ba dB e behiloeng ka boleng ba lengole.
7.12 Karolo e Matla e On/Oma (72)
E kenya tshebetsong karolo e itseng.
7.13 Sekhethi sa Karolo ea Compressor (73)
7.14 Mokhethi oa Karolo ea DCompressor (74)
7.15 Mokhethi oa Karolo ea Expander (75)
7.16 DEExpander Section Selector (76)

Pontšo ea likarolo tse 8 tse matla
8.1 Mosebetsi oa Karolo e Matla (77)
12 dB sekala
Phaello e bontšoa ho tloha ho le letšehali ho ea ho le letona bakeng sa keketseho ea phaello, phaello e bontšoa ho tloha ho le letona ho ea ho le letšehali bakeng sa ho fokotseha ha phaello.

Litlhaloso

Litlhaloso tsa Ts'ebetso - Alchemist

• Ho fihla ho likanale tse 16 Input/Output for Essential version.
• 64-bits ka hare ho phaphametseng ntlha e sebetsa.
• Sampsekhahla sa ho fihla ho 384 kHz DXD (Pyramix le Ovation MassCore/Native).
• Samplebelo la ling ho fihla ho 192 kHz bakeng sa Native (AU/VST/VST3/AAX/AAX AudioSuite).

Litlhaloso tsa Ts'ebetso - Seboka sa Alchemist

• Mono/Stereo Input/Output.
• 64-bits ka hare floating-point process.
• Samplebelo le phahameng ho fihlela ho 96 kHz.

Ho lumellana
BitterSweet Pro

• Windows - 10 64 bits.
  - VST (2.4) ka 64 bit
  - VST (3.1) ka 64 bit
  - AAX Native / DSP * ka 64 bit
  - AAX AudioSuite * ka 64-bit
  - Waves WPAPI Native / Soundgrid ka 64 bit
  - VS3** Pyramix 10 le ho feta ka 64 bit le Oover 6 le ho feta
  - Avid Venue Systems
• macOS (Intel le ARM) - 10.12 le ho feta, 11 le 12.
  - VST (2.4) ka 64 bit
  - VST3 (3.1) ka 64 bit
  - AU ka 64-bit
  - AAX Native / DSP * ka 64 bit
  - AAX AudioSuite * ka 64-bit
  - Waves WPAPI Native / Soundgrid ka 64 bit
  - Avid Venue Systems

** VS3 bakeng sa Pyramix& Ovation Native/MassCore e rekisoa feela ka Merging Technologies le barekisi ba lumelletsoeng.
Litlhoko tsa License
E le hore u sebelise Alchemist kapa Alchemist Session, ho hlokahala akhaonto ea mosebedisi ea iLok.com (iLok USB Smart Key ha e hlokehe).

Lisebelisoa

Lintlha tsa Phatlalatso
A.1 Haha 23.07.50310 - Tsohle plugins
A.1.1 Likarolo tse ncha

• Tšehetsa Pro Tools lifomate tse ncha tsa pina

A.1.2 Ho lokisa liphoso

• Tsohle plugins - Nuendo - VST3 - e senyeha ha stereo plugins li kenyellelitsoe lipina tsa li-multichannel (StereoTools, ...)
• Tsohle plugins – Lebelo sireletsoa plugins hloleha ho skena ho Da Vinci Resolve mac
• Tsohle plugins - Ho hlahisa metrics e fosahetseng ha u fetola skrini
• Tsohle plugins – Li-presets ha lia romelloa kantle ho naha
• Tsohle plugins - VST3 - Nuendo - WIN (UHD360) - Init ea boholo ba fensetere e fosahetseng
• Tsohle plugins - VST3 - WIN (UHD630) - REAPER - Khatiso e nchafatsang ea GUI ha e le ka fensetere e le 'ngoe.
• Tsohle plugins - Khatiso ea GUI e nang le lits'oants'o tsa AMD lifensetereng - bothata bo fokolang
• Tsohle plugins – AU – Plugins paramethara e setwa bocha ha e tlokoma ho Reaper
• Tsohle plugins - VST2 - ha ho na li-multichannel tse nang le plugins 23.X ho Reaper
• Tsohle plugins - VST - Ho fetola GUI ha ho ntlafatse boholo ba fensetere e phaphametseng ho Nuendo ho Windows ka litšoantšo tsa UHD630.
• Bittersweet - VST3 - e oela Pyramix hang hang
• StereoTool / EVO Channel - VST3 - Ha ho na goniometer / analyzer ho Wavelab
• Elixir - Ha e fumanehe e le liteishene tse 32 ho Reaper
• Letoto la EVO - AAX - Mokhoa o Lefifi oa GUI init e fosahetseng
• Letoto la EVO - tlosa li-presets tse sa sebelisoeng le tse kopitsoang
• EVO Channel - VST3 - spectrum smoothing slider e senya Studio e 'ngoe
• EVO Channel / EVO Eq - VST3 - Analyzer ha e sebetse ho Ableton Live
• EVO Channel / EVO Eq - taolo ea eq e lula e kenya hape ka mokhoa oa auto
• EVO Eq - tokollo e makatsang ka methareng
• EVO In - Khatiso ea GUI ea ho khatholla ha u fetola mokhoa oa bosiu / oa letsatsi
• EVO Touch - Leibole ea Zero Crossing Threshold e sieo phanele ea geek
• EVO Touch - khetho ea frequency band ha se kamehla e hopolang litlhophiso tse ntle mabapi le ho kenya seshene hape
• EVO Touch/ EVO Channel - Ho thata ho sebetsana le slider ea mefuta ea maqhubu
• Pure Serie - VST3 - Boleng ba tlhaselo ea max 80ms
• Pure Comp - Crash ha o kenya "Bass guitar" preset
• Pure Limiter - VST3 - mokhoa o tsoetseng pele ha o bulele litlhophiso tse tsoetseng pele
• StereoTool - VST3 - sebaka sa vector ha se sebetse ho Ableton Live ho Windows
• StereoTool - Ha e sebetse ho Final Cut Pro
• TRAX - Ho senyeha ho sebelisoa li-oversamplula ka linako tse behiloeng ho 2FS kapa ho feta
• TRAX Tr - ha e sa sebelisoa ho Protools (haha 50123)

A.1.3 Litaba tse tsejoang

• Tsohle plugins - VST - Khatiso ea GUI ho Izotope Ozone le RX
• Tsohle plugins - AAX - Motsamaisi oa Preset - Preset ea kamehla ha e sebelisoe ho li-parameter hang-hang ka plugin
• Elixir - Latency ha e lefelloe hantle ka mor'a ho fetola stage bohlokoa ho VST le AudioUnit
• TRAX tr - Ithute ts'ebetso ea ho khutlisa boleng bo fosahetseng
• VerbV3 - Taelo ea boraro ea HOA ha e sebetse hantle

A.2 Haha 23.1.0.50251 - Tsohle plugins
A.2.1 Likarolo tse ncha

• E ncha plugins Evo Compressor, Evo Touch le Evo EQ.
• Ts'ehetso ea VST3
• Tšehetso ea ARM bakeng sa AAX, AU le VST3
• Plugins joale li ka nchafatsoa
• Hona joale Elixir e tšehetsa liteishene tse 32
• Alchemist, BitterSweet, Epure, Pure Compressor, Pure DCompressor, Pure Expander, Pure DExpander, PureLimiter, Solera, Syrah hona joale e tšehetsa mechine ea 16

A.2.2 Ho lokisa liphoso

• Tsohle plugins - Motsamaisi oa Preset - Ntlafatsa setaele sa mosebelisi ha se sebetse
• Tsohle plugins - Motsamaisi oa Preset - Senya kapa u hatsele ha u boloka setaele
• Tsohle plugins - UI e kanna ea ba ntšo ho likarete tsa litšoantšo tsa Intel UHD 630
• Tsohle plugins - AU/VST3 - Motsamaisi oa Preset - Preset ea kamehla ha e sebelisoe ho li-parameter hang-hang ha ho etsoa plugin
• Tsohle plugins - AAX - Ho senyeha ha OSC ha u fetola fx slot ho Pro Tools
• Tsohle plugins - AU - Logic Pro - Boiketsetso ba li-parameter tsa boolean/integer bo robehile
• Tsohle plugins – AU – Plugins ho senyeha ha Da Vinci Resolve
• Tsohle plugins - DaVinci Resolve - VST - UI e fokotsehile
• Tsohle plugins - Streamlabs - Plugins se sebetse
• Tsohle plugins - Taba ea laesense ho DaVinci Resolve le GarageBand
• Alchemist - Paramethara ea mefuta e sebetsa feela bakeng sa sehlopha sa pele
• BitterSweet - Ha ho khonehe ho fokotsa phaello ea Output ka mor'a ho e hlakola
• BitterSweet - Phaello e hlahisoang ha e e-so behoe hape ka nepo ha sehokelo se holofetse
• BSPro - mekhoa e meng ha e fumanehe ka lebaka la bothata ba GUI
• Epure - macOS - Kemiso e mpe ea graphic scale ho 2 & 4FS
• Evo Channel - Referense ea mitha ha e bolokehe
• Syrah - Crash ha u khetha "Static compression e potlakileng" e behiloeng esale pele
• TRAX Tr - Ha sehokelo se kentsoe tšebetsong, slide ea Formant ha e na phello e lebelletsoeng ea molumo.
• TRAX Tr - ProTools - Phatlalatsa ho AudioStudio ha modulation e nolofalitsoe
• VerbSession/VerbSession Studio Session le BSPro StudioSession - Pyramix - VST ea senyeha ha e kentsoe
• Session ea Verb/Verb Studio - Ho senyeha ha lenaneo le kenya hape le na le maemo a 2

A.2.3 Litaba tse tsejoang

• Tsohle plugins - VST - Khatiso ea GUI ho Izotope Ozone le RX
• Tsohle plugins - AAX - Motsamaisi oa Preset - Preset ea kamehla ha e sebelisoe ho li-parameter hang-hang ka plugin
• Elixir - Latency ha e lefelloe hantle ka mor'a ho fetola stage bohlokoa ho VST le AudioUnit
• TRAX tr - Ithute ts'ebetso ea ho khutlisa boleng bo fosahetseng
• VerbV3 - Taelo ea boraro ea HOA ha e sebetse hantle

A.3 Haha 21.12.0.50123 - Tsohle plugins ntle le TRAX le StudioSession
Litokiso tsa liphoso

• Tsohle plugins AudioUnit - Khatiso ea GUI e nang le lipontšo tsa Hdpi ho macOS Monterey
• Tsohle plugins VST - Sesebelisoa sa plugin se hoama ho Wavelab 11 mochining oa Mac M1
• Tsohle plugins VST - Ho senyeha ha Adobe Audition ho macOS
• Tsohle plugins VST macOS - Lokisa likotsi ka Ableton live
• Elixir - Automation ha e baloe bakeng sa toggle parameters.
• Elixir - Crash ha o tobetsa konopo ea litlhophiso ho mofuta oa Session
• Elixir - Litokiso tse 'maloa ho UI
• Elixir - Windows AAX - Khatiso e nchafatsa ka maemo a mabeli ho ProTools
• HEar - Bypass e sebetsa ho AAX
• Utloa AAX - Ho senyeha ha u etsa bounce ntle le marang-rang ho macOS
• Utloa AAX - Ho senyeha ha u hlophisa matrix ho macOS
• Utloa AAX - Stereo - Phetoho ho Matrix ha e sebelisoe ho fihlela re fetola setaele
• HEar AudioUnit - Ableton ea senyeha ha e kenya mohlala oa bobeli

A.4 Build 21.11.0.50107 (Utloa, Leetsi la IRCAM)
HLOKOMELA: HONA joale ha e tsamaellane le ABLETON LIVE MACOS
Ntlafatso

• HEar - 5.1.4 & 5.0.4 e fumaneha hona joale

Litokiso tsa liphoso

• HEar - Lokisa taba ea ho khatholla ea limithara
• HEAR - Ha ho leetsi ho li-presets tse ling
• HEar - Li-Protools lia senyeha ha li etsa bounce ntle le marang-rang ho macOS

A.5 FLUX:: Ka botebo - Plugins (ho kenyeletsoa Lisebelisoa tsa IRCAM) 21.09
Tokollo ena e kenyelletsa lintlafatso bakeng sa lihlahisoa tsohle tsa FLUX::Immersive plugin processing ntle le EVO Channel, Epure, IRCAM Trax, Studio Session.
HLOKOMELA: HONA joale ha e tsamaellane le ABLETON LIVE MACOS
Lintlafatso tse kholo

• Apple likhomphutha Big Sur (li-chips tse ncha tsa M1) netefatso ea AU
• Lintlafatso tsa bohlokoa ho Ircam Verb + Session
• Ts'ebetso e ntle ka ho fetesisa ea li-setups tsa lipina tse ngata tse kang Atmos. (Irccam Hear, Verb le tse ling)
• Ho fumanoa ka mokhoa o ikhethileng oa sebopeho sa pina / tatellano ea kanane bakeng sa li-DAW ha ho khonahala.

A.5.1 Haha 21.9.0.50083
Litokiso tsa liphoso

• Apple komporo ea Big Sur (li-chips tse ncha tsa M1) AU e hlolehile
• GUI e se nang letho ha u koala/ bula hape plugin - Windows 10 - Grafiken ea UHD630
• AudioUnit in Reaper - se ke oa sebetsa molumo ha o ntse o lla ka ntle ho marang-rang
• Tlhophiso ea kamehla ha ea kengoa ka nepo ha ho etsoa Session ea Leetsi + Leetsi
• Evo.Channel on Retina – Input and Output Slider e senyehile hampe
• Taba ea AudioUnit e sa lumellaneng ho Apple Final Cut Pro
• Plugins: Hopola Lifolakha Tse Setiloeng (mohlala, "All empa setup") hopola tsohle
• Motsamaisi oa Preset - Khatiso ea UI e nyane plugins ha preset e entsoe
• Ircam Verb Session e kenya hape ho VST ka tšitiso ea molumo
• VST Plugins Session ha e ntlafatsoe hape ka nepo haeba e kopanya phetoho ea tlhophiso ea IO
• Seboka sa leetsi - E omileng/e metsi ha e sebelisoe ho offline render
• Leetsi la v3 Atmos le oela ho AAX
• Leetsi: Netefatso ya AU e hlolehile ho Apple M1
• Leetsi: LFE ha e koalehe ka ho sa feleng ho ProTools
• Leetsi: Hopola Preset e kanna ea se nepahale ka ho tobetsa habeli ka har'a molaoli o hlophisitsoeng
• Leetsi: kanale e holofetseng ha e kenngoe hape ho latela paramethara e omileng/e metsi (100 % metsi e bolela ho khutsisoa)
• Leetsi: init taba le Nuendo
• AAX - Tse ling plugins - Crash ho Mac / Ha ho GUI ho Windows
• Kakaretso ea botšepehi / botsitso litokiso.
• Boholo ba plugin ha bo nepahale
• Monyetla plugins senya ha u bula UI

A.6 FLUX:: Ka botebo - Plugins (ho kenyeletsoa Lisebelisoa tsa IRCAM) 20.12
Tokollo ena e kholo e kenyelletsa lintlafatso bakeng sa FLUX eohle ::Lihlahisoa tse qoelisoang ntle le sehlahisoa sa lefa sa IRCAM Spat V3. Ka kopo, sheba likhetho tsa Spat V3 - Spat Revolution.
Lintlafatso tse kholo

• Tšehetso ea HiDPI / Retina + lintlafatso le litokiso
• Kopano ea Letlapa la Leqephe bakeng sa Avid Control, S1, S3, S4, S6 le S6L.
• Taolo ea OSC bakeng sa plugins.
• Tšehetso ea Verb ea IRCAM bakeng sa Dolby Atmos, Multichannel e tšehetsa liteishene tse fihlang ho tse 16
• IRCAM Utloa - ntlafatso ea botsitso ba li-multichannel, Hona joale liteishene tse fihlang ho tse 10. (Dolby Atmos 7.1.2)
• Lisebelisoa tsa IRCAM - Audio I/O Matrix le ntlafatso ea Multichannel
• Boholo plugins tšehetso ea 8 kanale.
• Ts'ehetso ea liteishene tse 16 bakeng sa Bittersweet Pro, Evo In le Evo Channel

A.6.1 Haha 20.12.0.49880
Litokiso tsa liphoso
Koko:

• BSPro - Taba ea tlaleho ea morao-rao (AAX)
• IRCAM TRAX Tr - Taba ea tlaleho ea morao-rao
• Leetsi la IRCAM - Boleng ba ho qala bo fosahetseng bakeng sa boima ba leetsi
• IRCAM Verb - Letšoao le omileng le ntse le tsoela pele ka likanale tse holofetseng ha metsi a le 100%.
• All Pure Dynamics PI + Alchemist - Litekanyetso tse Fosahetseng tsa ho qala
• AAX "monolithic" e robehile joalo ka Hear, TRAX joalo-joalo ...
• Hoo e ka bang tsohle AAX plugins u se ke oa kenya li-parameter hape ho tsoa lenaneong la mofuta oa 47856.
• Pure Limiter - Karolo ea Diff e fetisitse phaello ea ho kenya.
• Pure Limiter - Lifilimi tse kentsoeng tsa sidechain.
• Plugin leha e le efe ntle le Evo Channel - Research Presets e tsosolosa ha o tobetsa ho seta esale pele.
• Seteishene sa Evo - Maemo a fosahetseng ha o kenya karolo ea ho ama hape.

UI:

• Lebitso la hajoale le tla nyamela ha ho buloa GUI kapa seshene hape

A.7 Litaba Tse Tsejoang

• Wavelab “Sample rate ha e tshehetswe” ha plugin e kenngwa sekotwana, pina kapa karolo ya tlhahiso.
• TRAX Tr - Ithute maqhubu a bonts'a boleng bo fosahetseng (AAX feela).
• Utloa - Li-label tsa configure ea ka hare lia fetoha ha u fetola configure ea LFE ho tloha matrix a routing.
• Ha o sebelisa OSC ho plugin ho Pro Tools, ho tla ba le khrash haeba o fetola / o tsamaisa li-slots tsa FX.

Copyright (c) 2023 FLUX:: SE,
Litokelo tsohle li sirelelitsoe.

Litokomane / Lisebelisoa

FLUX Alchemist V3 Dynamic Processor [pdf] Bukana ea Mosebelisi Alchemist V3 Dynamic Processor, Alchemist, V3 Dynamic Processor, Dynamic Processor, processor

Litšupiso

• Bukana ea Mosebelisi