Alchemist
FLUX :: Kunyura
2023-02-06

Alchemist - Iyo Alchemist pfungwa

Product Peji | Shop Page

Pakutanga, iyo wideband siginecha yakakamurwa kuita frequency mabhendi nemutsetse unogadziriswa muchinjiko.
Bandi rega rega rinogadziriswa kuti rive dynamic. Kune yega yega frequency bhendi, chikamu chese chine simba chekugadzirisa, iyo compressor, de- compressor, yekuwedzera uye de-expander inoratidzira yayo envelope jenareta inosanganisira Dynamic Ratio, Peak chiyero maparamita, LID (Level yakazvimirira Detector) uye chikumbaridzo chayo kugadzirisa. Kune yega frequency bhendi, maneja wenguva pfupi anogona kuiswa pre kana post dynamic process. Kuti uwane hutongi hwese pachiratidzo chekuteerera, manejimendi yeMS inowanikwa pane yega frequency band.
Ipapo ese ma frequency mabhendi anopfupikiswa kuvakazve wideband yakagadziriswa chiratidzo. Iyo yakapfava clipper ine chikumbaridzo chebvi rakapfava, uye yakaoma musanganiswa control iripo.
Alchemist inounganidza mune imwechete plug-in yese Flux sainzi nezve kusefa uye kusimba kugadzirisa.

General Settings uye Display

Ichi chikamu chinogadzirisa yakafara bhendi maitiro eAlchemist plug-in. Iyo zvakare inodzora nhamba yebhendi yekugadziriswa (27) uye kusarudzwa kwebhendi yekumisikidza bhendi (22).

2 General Zvirongwa
2.1 Kuwana Kupinza (1)
Chikamu: dB
Kukosha Kwemhando: -48 / +48
Nhanho: 0.
Default Kukosha: 0 dB
Inoseta kuwana kunoshandiswa kune inochinja-chinja yekuisa.
2.2 Dry Mix (2)
Default Kukosha: -144 dB
Iyi inotsvedza inodzora huwandu hwechiratidzo chepakutanga chinogona kuwedzerwa kune yakagadziriswa odhiyo.
Iyi ficha yakatsaurirwa ku mastering mabasa anoda ese anorema kugadzirisa uye akajeka kutonga.
Iko kusanganiswa kunoitwa kusati kwabuda kuwana.
2.3 Kuwana Kubuda (3)
Chikamu: dB
Kukosha Kwemhando: -48 / +48
Nhanho: 0.
Default Kukosha: 0 dB
Inoseta kuwana kwepasirese kunoshandiswa kune inosimba kugadzirisa inobuda pamberi peiyo nyoro clipper.
2.4 Invert Phase (4)
Default Value: Off
Kana bhatani iri rabatirwa, chikamu chechiratidzo chakagadziriswa chinodzoserwa.
2.5 Gonesa Clipper (5)
Clipper ndiyo yekupedzisira stage yeketani yekugadzirisa.
2.6 Clipper Knee (6)
Chikamu: dB
Kukosha Kwemhando: 0 / +3
Nhanho: 0.
Default Kukosha: 1 dB
Inogadzirisa kutsvedzerera kweiyo curve yekutumira.
2.7 Clipper Ceiling (7)
2.8 Bypass (8)
Kudarika kwepasi rose.
2.9 Chisarudzo Chekugadzirisa Chanji (9)
Paunenge uchishanda pa-multi-channel (yakapoteredza) bhazi, nzira dzose dzinogadziriswa nekukasira, asi zvinogona kubatsira kubvisa dzimwe nzira kubva pakugadzirisa kune zvimwe zvikonzero. Iyi sarudzo inobvumira kuchengetedza nzira dzisina kuvharwa dzisina kubatwa. Iyi ficha inogona kushandiswa kana akasiyana marongero achidikanwa. Mamiriro akati wandei eplug-in anogona kushandiswa munhevedzano, imwe neimwe ichigadzira imwe chiteshi ine zvigadziriso zvayo.
2.10 Channel Side Chain Routing (10)
Paunenge uchishanda pane akawanda-channel bhazi, ese machani ari kudyisa cheni yepadivi nekukasira, asi zvinogona kubatsira kudzivirira mamwe machani kudyisa cheni yepadivi nekuda kwezvimwe zvikonzero.
2.11 Band Selector (11)
Iyo frequency band kusarudzwa kunoitwa pano.
Inogonawo kuitwa kubva kunzvimbo huru yekuratidzira.
2.12 Nhamba yeBand Control (12)
Iyo Minus uye Plus mabhatani anobvumira kutsanangura huwandu hwema frequency mabhendi eAlchemist kubva pa1 kusvika ku5.
2.13 Reset Solo (13)
Bhatani iri rinodzima ese arikubatanidzwa bhendi rega.

General Display

Windows:
Tinya-kurudyi pane bhendi rakasarudzwa rinowana yakasarudzika menyu inobvumira kuseta zvakare bhendi (ma) kana kukopa bhendi paramita kune rimwe bhendi. Iyo Auto Solo ficha inogona kuwanikwa kana uchidzvanya kiyi yeCtrl + Dzvanya pabhendi raunoda.
MacOS:
Kurudyi-Tinya kana Ctrl + Dzvanya pane yakasarudzwa bhendi inowana yakatarwa mamiriro menyu inobvumira kuseta zvakare bhendi (s) kana kukopa bhendi paramita kune rimwe bhendi. An Auto Solo ficha inogona kuwanikwa kana uchidzvanya Command (Apple) Kiyi + Dzvanya pabhendi raunoda.
3.1 Input Peak Meter (14)
3.2 Output Peak Meter (15)
3.3 Link kuratidza (16)
Iwo mabhendi anogona kuve neawo ma parameter akabatanidzwa. Tinya-kurudyi pachiratidziro chikuru chinobvumira kupinda kune yemamiriro ezvinhu. Kugadzirisa kuseta kwebhendi rakabatanidzwa zvakare kunogadzirisa iyi seti yemabhendi ese akabatana.
3.4 Band Kuwana Mubato (17)
Iyo bhendi inoratidzira inoratidza zvese zvekupinza uye kunze zvakawanikwa.
Mubato unochekerera kuburitsa.
Shift + Dzvanya inoderedza kuwana kwekuisa.
Dzvanya kaviri gadziridza iyo inobuda kune iyo yekutanga kukosha.
3.5 Band Frequency Handle (18)
Shift + Dzvanya inogonesa kucheka kwakanaka
Kudzvanya-kurudyi kunoshandura kutsetseka kwesefa
Dzvanya-kaviri gadziridza mafrequency kune iyo default value.
3.6 Global Band Mubato (19)
Dzvanya-kaviri gadziridza mafrequency kune iyo default value.
Ctrl + Dzvanya auto-solos bhendi rakasarudzwa.
3.7 Band Chiitiko (20)
Iyo inoratidza iyo yakashandiswa kuwana asi zvakare tora iyo nhoroondo yekuwana shanduko yakaunzwa neiyo Bitter Sweet chikamu.
3.8 Low Pass Sefa Frequency (21)
Kukosha kunogona kuiswa uchishandisa keyboard kana slider control.
Kukweva zvibatiso zvebhendi zvinogonekawo kubva pachiratidziro chikuru.
3.9 Low Pass Sefa yakatsetseka (22)
Kukosha kunogona kuiswa uchishandisa keyboard kana slider control.
Shift + Kukweva bhendi zvibato zvinogoneka zvakare kubva kune chikuru chiratidziro.
3.10 Hi Pass Filter Slope (23)
Kukosha kunogona kuiswa uchishandisa keyboard kana slider control.
Shift + Kukweva bhendi zvibato zvinogoneka zvakare kubva kune chikuru chiratidziro.
3.11 Hi Pass Filter Frequency (24)
Kukosha kunogona kuiswa uchishandisa keyboard kana slider control.
Kukweva zvibatiso zvebhendi zvinogonekawo kubva pachiratidziro chikuru.
3.12 Preset Maneja Kuwana (25)
Kusvika kune preset maneja hwindo.
3.13 Yakarodha Preset Display (26)
Nyeredzi inoratidza gadziriso yakagadziridzwa.
3.14 Sevha (27)
Sevha inotsiva yakasarudzwa preset neitsva pasi pezita rimwechete rine zvigadziriso zvazvino. Kana iwe uchida kuchengetedza iripo preset isina yako magadzirirwo matsva, ingosarudza nzvimbo isina chinhu mune preset rondedzero, isa zita idzva reiyi yakagadziridzwa preset ine zvigadziriso zvazvino wodzvanya Save.
3.15 Rangarira (28)
Kana preset yasarudzwa kubva pane yakafanorongwa rondedzero inofanirwa kuiswa pachena muchikamu A kana chikamu B nekushandisa bhatani rekurangarira. Preset inoshanda chete mushure mekunge yayeukwa.
3.16 Kopi A / Kopi B (29)
Izvo zvino zvimiro zvechikamu zvinoteedzerwa kune imwe. Chikamu A kana B chinotangwa zvakare nemaitiro emazuva ano uye morphing slider yakamira pa100% yechikamu chinoenderana.
3.17 Morphing Slider (30)
Iyi horizontal slider haina kubatana kana kukosha chaiko kuratidza. Inobvumira morph yazvino marongero pakati peaviri akaremerwa preset. Tinya kaviri kune rimwe divi renzvimbo inotsvedza inochinja pakati pese A uye yakazara B marongero.
Mhedzisiro yepakati-yepakati peseting inogona kuchengetwa seyakagadzikwa nyowani.
Yepasirese preset inosanganisira maviri akaremerwa presets uye morphing inotsvedza chinzvimbo inogona zvakare kuchengetwa kubva preset manejimendi hwindo.
3.18 Kudzora otomatiki kweMorphing Slider (31)
Default Value: Off
Kana bhatani iri ravharwa, ese ma plug-in parameters anorekodhwa kana achinyora otomatiki. Iyo morphing slider haina kufuratirwa.
Paunenge uchiverenga otomatiki, kana bhatani iri rakadzimwa, ese ma plug-in ma paramita anodzorwa neanogamuchira otomatiki kunze kweiyo morphing slider.
Kana bhatani iri rabatirwa, ese ma paramita anorekodhwa paanenge achinyora otomatiki kusanganisa iyo morphing slider.
Kana bhatani iri rabatirwa, CHETE iyo morphing slider kukosha ndiyo inoshandiswa paunenge uchiverenga otomatiki.
Bhatani reAutomation rinofanirwa kubatanidzwa kana morphing inotsvedza ichifanirwa kumepurwa pane yekudzora nzvimbo.

Mabhendi Settings uye Display

Iwo makuru ma paramita ebhendi akaunganidzwa pane iyi pani. Alt + Dzvanya kwechinguva unlink yekutonga kana bhendi rabatanidzwa.

4 Band Settings
4.1 Band Solo (32)
Solo bhendi rakasarudzwa
4.2 Yakasarudzwa Band Chiyeuchidzo (33)
4.3 Band Bypass (34)
Bvisa bhendi rakasarudzwa.
4.4 Link (35)
Default: Yakagoneswa
Nekusagadzika kukosha kwepamusoro kwakapihwa kubva kune ese machani ekudyisa cheni yepadivi inochengetwa senzvimbo yekugadzirisa. Nenzira iyi, ruzivo rwemuchadenga runochengeterwa masaini akagadziridzwa akawanda.
Kana yakaremara, chiteshi chega chega chinoshandisa kukosha kwayo pakugadzirisa kwega. Iyi gadziriso inogona kushandiswa pamwe chete neiyo MS hupamhi chikamu chinoisa chiratidzo muMS isati yagadziriswa, uye decode pane inobuda. Nenzira iyi, chiratidzo cheM chinogona kugadziriswa uchichengeta chiteshi cheS chisina kubatwa.
4.5 Kuwana Kupinza (36)
Chikamu: dB
Kukosha Kwemhando: -12 / +12
Nhanho: 0.01
Default Kukosha: 0 dB
Inoseta kuwana kunoshandiswa kune inochinja-chinja yekuisa yebhendi rakasarudzwa.
4.6 Kuwana Kubuda (37)
Chikamu: dB
Kukosha Kwemhando: -12 / +12
Nhanho: 0.01
Default Kukosha: 0 dB
Inoseta kuwana kwepasirese kunoshandiswa kune dynamic processing kubuda kwebhendi rakasarudzwa.
4.7 Inovava Inonaka Pa/Kudzima (38)
Kana vakabatikana, iyo Bitter Sweet processing inoshanda.
4.8 Mari Yenguva pfupi (39)
Chikamu:%
Kukosha Kwemhando: -100 kusvika +100
Default kukosha: 0
Kudivi Rinotapira (kuruboshwe), zvipfupi zvinoderedzwa. Iyo inowanzo dzikisa zviridzwa zvepercussive mumusanganiswa.
Kudivi Rinovava (kurudyi), zvinopfuudza zvinokudzwa. Inowanzowedzera zviridzwa zvinoputika mumusanganiswa.
4.9 Post Band Processing (40)
Kana wabatikana, iyo Bitter Sweet process inoitwa mushure meiyo simba kugadzirisa. Zvikasadaro, zvinoitwa pamberi pezvimwe zvikamu zvekugadzirisa zviri kushanda zvakafanana.
4.10 Auto Gain Muripo (41)
Kana wabatiswa, mubairo wekubuda unobhadharwa zvichienderana nehuwandu hwenguva pfupi kuti ubudise inenge yekubatana kuwana.
4.11 Bitter Sweet Sustain Release (42)
Kudzora uku kunoseta nguva yekuburitsa yevhovhoropu inopfuura.
4.12 Operation Mode Selector (43)
Maitiro makuru uchishandisa yakajairwa stereo siginecha uye ndiyo chete inowanikwa maitiro e multichannels mashandiro. Center inobata yemukati MS encoder uye inongogadzirisa iyo Mid chiteshi. Mushure mekugadzirisa ruzha runodzoserwa kumashure kune stereo. Sezvo iyo M chiteshi inowanzoisa yakawanda enregy kupfuura S chiteshi, iyi modhi inobvumira kudzora zviri nyore kukanganisa kwekurira.
Stereo inobata yemukati MS encoder uye inongogadzirisa iyo Side chiteshi. Mushure mekugadzirisa ruzha runodzoserwa kumashure kune stereo. Sezvo iyo S chiteshi ine ruzivo rwenzvimbo, iyi modhi inobvumira kudzora zviri nyore stereo imaging.
4.13 Inovava Nguva Inotapira (44)
Chikamu: ms
Kukosha Range: 3 kusvika 450 ms
Default Kukosha: 42 ms
Kudzora uku kunoseta huwandu hwehwindo renguva rinoshandiswa kuona mapfupi anozogadziriswa.
4.14 MS Width Control (45)
Chikamu: dB
Kukosha Kwemhando: -6 / +6
Nhanho: 0.01
Default kukosha: 0
Inoseta hupamhi hwestereo yechiratidzo chakagadziriswa. A -6 dB kukosha kunobvisa upamhi hwe stereo. A +6 dB kukosha inowedzera kuwanda kweiyo stereo musanganiswa asi inogona kuburitsa chikamu nyaya.
4.15 MS Mode Pa/Kudzima (46)
Default Value: Off
Inogonesa imwe MS encoding matrix pane yekuisa uye imwe MS decoding matrix pakubuda kweiyo simba kugadzirisa kuitira kudzora stereo upamhi hwemusanganiswa. Kana yabatikana, ketani yepadivi inodyiswa neMS encoded siginecha inoratidzwa muchikamu chekuratidzira. Iyo M chiteshi inoenderana neyakajairika kuruboshwe chiteshi. Uye iyo S chiteshi inoenderana neyakajairwa yekurudyi chiteshi Ichi chimiro chinowanikwa chete kana maviri chiteshi (hapana, kana mashoma) akagadziriswa.

5 Nguva Dzinoenderana Nenguva
5.1 Kunonoka (47)
Chikamu: ms
Kukosha Range: 0 kusvika 50.0 ms
Default Kukosha: 0 ms
Kunonoka kunoratidza nguva yekurwisa kunogona kuunzwa munzira yechiratidzo kuitira kuti ibudise zero yekurwisa nguva yesimba rekugadzirisa. Kuchinjisa kukosha kwekunonoka kubva panguva yekurwisa kunobvumira kudzora mapfupi. Iko kunonoka kukosha kwakaderera kune kukosha kwekurwisa kunoita kuti mapeaks asina kubatwa nekugadzirisa.
Cherechedza
Ziva kuti kunonoka kwakasiyana kwebhendi rega rega kunobhadharwa. Solera haigone kushandiswa kugadzira kunonoka kwakavakirwa yakakosha mhedzisiro.
Yambiro
Yambiro: Morphing pakati pe preset ine akasiyana kunonoka kukosha kunogadzira inonzwika artefacts.
Ehe kunonoka uku kunosuma latency mukugadzirisa.
5.2 Kunonoka Pamotokari (48)
Default Value: Off
Kana yagoneswa, kukosha kwekunonoka kunobatanidzwa nehuwandu hwekurwisa. Ziva kuti latency yakaunzwa nebasa iri ikozvino yakaenzana nenguva yako yekurwisa yakanyudzwa ne2.
5.3 Modhi (49)
Default Value: Solera
8 nzira dzekuona dzakasiyana dziripo: - Solera: Iyo Attack kuseta zvakare inodzora nguva yekubatanidza yekuonekwa kweRMS. Kana "Auto" yabatirwa kukosha kwekunonoka, iyo inogadzirwa nguva yekurwisa i zero. - Solera Feed Backward: Iyo Attack kuseta zvakare inodzora nguva yekubatanidza yeRMS yekuona iyo inoitwa pakubuda kwe processor. Iyi modhi inodzima iyo Delay chimiro. Ziva zvakare kuti Solera Feed Backward inodzivirira kushandisa cheni yekunze nekuti ndiyo chiratidzo chakagadziriswa chinodyisa cheni yepadivi. - Yechinyakare Nekukurumidza: Iyo yekubatanidza nguva yekuonekwa kweRMS ndeye gumi ms isina hukama hwakananga neiyo Attack kuseta. Asi kana "Auto" yabatirwa kukosha kwekunonoka, iyo inogadzirwa nguva yekurwisa i zero. - Classic Medium: Iyo yekubatanidza nguva yekuonekwa kweRMS ndeye 10 ms isina hukama hwakananga neAtack set. Asi kana "Auto" yabatirwa kukosha kwekunonoka, iyo inogadzirwa nguva yekurwisa i zero. - Classic Inononoka: Nguva yekubatanidza yekuonekwa kweRMS ndeye 40 ms isina hukama hwakananga neAtack set. Asi kana "Auto" yabatirwa kukosha kwekunonoka, iyo inogadzirwa nguva yekurwisa i zero. Classic Feed Kumashure Nekukurumidza: Nguva yekubatanidza ndeye gumi ms yeRMS yekuona iyo inoitwa pane inobuda processor. Iyi modhi inodzima iyo Delay chimiro. Ziva zvakare kuti iyo Feed Backward modhi inodzivirira kushandisa yekunze parutivi cheni nekuti ndiyo yakagadziriswa siginecha inodyisa ketani yepadivi. - Classic Feed Backward Medium: Nguva yekubatanidza ndeye 80 ms yeRMS yekuona iyo inoitwa pane inobuda processor. Ziva zvakare kuti iyo Feed Backward modhi inodzivirira kushandisa yekunze parutivi cheni nekuti ndiyo yakagadziriswa siginecha inodyisa ketani yepadivi. - Classic Feed Kumashure Inononoka: Iyo nguva yekubatanidza ndeye 10 ms yeRMS yekuona iyo inoitwa pane inobuda processor. Ziva zvakare kuti iyo Feed Backward modhi inodzivirira kushandisa yekunze parutivi cheni nekuti ndiyo yakagadziriswa siginecha inodyisa ketani yepadivi. Aya Feed Backward modes akafemerwa nevintage Hardware architectures. ivo vanogadzira mhando ye auto regulation yekugadziriswa iyo inoburitsa yakasikwa befy ruzha.
5.4 Kurwiswa (50)
Chikamu: ms
Value Range: 0 ms kusvika 100 ms
Default Kukosha: 0.0 ms
Inoisa nguva yekurwisa yehamvuropu yekugadzirisa. Iyo zvakare inodzora nzira iyo kukosha kweRMS inoverengerwa kubva kune iri kuuya chiratidzo.
Yambiro
Yambiro : The Attack setting zvakare inodzora nguva yekubatanidza yeRMS yekuona.
5.5 Bata (51)
Chikamu: ms
Kukosha Kwemhando: 0 ms / 500 ms.
Default Kukosha: 0 ms
Iyi parameter ndiyo yega mune yakabatana nguva marongero, ayo akazvimirira pane ane simba processor. Iyo compressor uye yekuwedzeredza inogona kunge iine dzakasiyana kubata nguva.
Inoshandiswa muchikamu cheExpander, iyi gadziriro inobvumira kunyatsoita gating yengoma dzengoma. Inogona zvakare kushandiswa kugadzira chinangwa pane zvimwe zvikamu zvine simba.
5.6 Release Mode (52)
Default Kukosha: Auto
Matatu ekuburitsa modhi anowanikwa kune envelopu yeiyo dynamic process. -Bhuku rinoenderana nekukosha kwawakaseta. -Otomatiki inogonesa yedu chaiyo algorithm kuburitsa chiratidzo chinotsamira kukosha kudzivirira yakajairika kupomba mhedzisiro. - Yepamberi inopa mukana kune maviri akasiyana maitiro ekusunungura uye kune kutonga kweiyo velocity yekusiyana pakati pehupamhi uye hudiki hwekuburitsa kukosha.
5.7 Kuburitswa (53)
Chikamu: ms
Kukosha Kwemhando: 0.67 ms / 10000.00 ms
Default Kukosha: 500.00 ms
Inoisa kukosha kwekuburitsa kwebhuku uye kukosha kwepamusoro kwekuburitsa kana uri muAdvanced Mode.
5.8 Kuburitsa Zvishoma (54)
Chikamu: ms
Kukosha Kwemhando: 0.67ms / 5000.00
Nhanho: 0.01
Default Kukosha: 1.30 ms
Inoseta iyo shoma yekuburitsa kukosha kana iri muAdvanced Mode.
5.9 Dynamic Factor (55)
Chikamu: x
Kukosha Kwemhando: 0 / 3.0
Danho: chinja.
Default kukosha: 1
Ampgadzirisa kana kudzima iyo yakatorwa chaiyo nguva yeruzivo ruzivo.
5.10 Dynamic Velocity (56)
Chikamu:%
Kukosha Kwemhando: 10 / 1000
Nhanho: 1
Default kukosha: 50%
Inoseta kumhanya kwekusiyana pamashoko ane simba.

6 Band Display
6.1 Input Level Meter (57)
Vu-mita kwete peak-metres, inonongedzwa ku -16 dB Fs nekukasira, ine auto size zvinoenderana nehukuru hwechikumbaridzo. Kana iyo MS Width chikamu chabatanidzwa, iyo M (Mid) nhanho inoratidzwa kuruboshwe mita. S (Side) inoratidzwa pamamita ekurudyi.
Indekisi yegirini inoratidza kukosha kwechikumbaridzo.
6.2 Kubuda Level Meter (58)
Vu-mita kwete peak-metres, inonongedzwa ku -16 dB Fs nekukasira, ine auto size zvinoenderana nehukuru hwechikumbaridzo. Kana iyo MS Width chikamu chabatanidzwa, iyo M (Mid) nhanho inoratidzwa kuruboshwe mita. S (Side) inoratidzwa pamamita ekurudyi.
6.3 Chinobuda Envelopu (59)
Vu-mita kwete peak-mita, inonongedzwa kune -16 dB Fs nekusarudzika.
Chikero chiri +/- 12 dB.
Iyi ndiyo compression, decompression, expander uye de-expander summing envelope.
Ichi chiratidziro hachiratidzi zvakananga shanduko yekuwana yakaunzwa neBitter Sweet chikamu chinogona kuiswa pre kana post parallel dynamic processors.
6.4 Musiyano une simba pakati pemukati nekunze (60)
Vu-mita kwete peak-mita, inonongedzwa kune -16 dB Fs nekusarudzika.
Chikero chiri +/- 12 dB.
Ichi chiratidziro hachiratidzi zvakananga shanduko yekuwana yakaunzwa neBitter Sweet chikamu chinogona kuiswa pre kana post parallel dynamic processors.
6.5 Level musiyano pakati nekunze (61)
Vu-mita kwete peak-mita, inonongedzwa kune -16 dB Fs nekusarudzika.
Chikero chiri +/- 12 dB.
Uku ndiko kudzvanya, decompression, expander uye de-expander summing envelope iyo inotorawo nhoroondo yekupinza uye kuburitsa zvakawanikwa zvebhendi.
Ichi chiratidziro hachiratidzi shanduko yekuwana yakaunzwa nechikamu Inovava Inonaka.
Iyo Bitter Sweet chiito inogona kucherechedzwa pane chikuru chiratidziro.
6.6 Dynamic Chiitiko Chiratidziro (62)
Hapana chikero
Ikozvino LID Threshold value inoratidzwa nemitsetse miviri yakasvibira paDynamic Activity display.
KuCompressor uye DCompressor zvikamu, iyo LID chiito chinoshanda chete kana orenji Dynamic Chiitiko ichipfuura nzvimbo iri pakati pemitsetse miviri yegirinhi.
Kune zvikamu zveExpander neDExpander, iyo LID chiito chinoshanda chete kana orenji Dynamic Activity yagara mukati menzvimbo pakati pemitsetse miviri yegirinhi.
6.7 Instant Release Value (63)
Auto Scale zvinoenderana nehuwandu hwekuburitsa (s)
6.8 Zvinokonzera Transfer Curve (64)
Auto Scale zvinoenderana nehukoshi hwechikumbaridzo (s)

Dynamic Sections Settings uye Display

Bhendi rega rega rine zvikamu zvina zvine simba zvinoshanda zvakafanana.
Alt + Dzvanya kwechinguva unlink yekutonga kana bhendi rabatanidzwa.

7 Dynamic Sections Settings
7.1 Peak Detection Mari (62)
Chikamu:%
Kukosha Kwemhando: 0 / 100
Nhanho: 1
Default kukosha: 0 %
Percentage yehukoshi hwepamusoro hunoshandiswa kudyisa chikamu che detector, zvichiita kuti dhizaini yekushandura iwedzere kunzwisiswa kune zvinonzwika.
0 % zvinoreva 100 % RMS chiratidzo chekudyisa chikamu che detector; 100 % zvinoreva chete chiratidzo chepamusoro chiri kupa chikamu che detector. 50% = makumi mashanu - makumi mashanu
7.2 Dynamic Ratio (63)
Chikamu:%
Kukosha Kwemhando: 0 / 100
Nhanho: 1
Default kukosha: 0 %
Uku kugadzika kunodzoreredza reshiyo yakashandiswa kuchikamu che processor kana iyo yakaonekwa siginecha inosimuka.
Kugadzika uku kunovhura ruzha, kunowedzera fungidziro uye inochengeta imwe crest nekugadzirisa munguva chaiyo chiyero chese chikamu chesimba chekugadzirisa zvine chekuita nezvese zvazvino zvigadziriso nezve reshiyo uye chiratidzo chemukati (kunyanya simba renji). Kuti utange kunzwisisa marongero aya uye nekuanzwa zviri nyore, tora chigubhu chizere chakasanganiswa kana musanganiswa wakazara nemadhiramu ane punchy, isa chikumbaridzo chekumanikidza, reshiyo yekuwana chimwe chinhu pedyo nekupomba kana kudzvanyirira zvine hasha.
Wobva wawedzera iyo inobuda mubairo kutsiva iyo yakarasika wobva wachinja pakati pe0 ne100% yeDynamic Ratio. Pa100% iwe unofanirwa kunzwa wakawanda mhepo muruzha, inopfuura uye isinganyanyi kudzvanya maratidziro; kunyanya panyaya yekurwisa.
7.3 Dynamic Ratio Inverter (63)
Paunenge wabatikana, maitiro eiyo Dynamic Ratio anopindurwa. Hukoshi hwereshiyo hunowedzerwa zvichienderana neiyo yaonekwa chiratidzo chekuchinja.
7.4 LID. (Level Yakazvimirira Detector) (64)
Chikamu:%
Kukosha Kwemhando: 0 / 100
Nhanho: 1
Default kukosha: 0 %
Inobvumira kugadzirisa iyo odhiyo siginecha yakazvimiririra yeyero yekurira asi maererano nechiratidzo chekuchinja. Inosanganiswa neyakajairwa compression scheme.
Tora chidimbu chemimhanzi yakazara yakasanganiswa, isa chiyero kune 3-4 uye kudzvanya kuchatanga kushanda. Iye zvino isa chikumbaridzo checompressor kune iyo yakanyanya kukosha, iyo compressor ichamira kushanda nekuti iyo inzwi nhanho haizombosviki pachikumbaridzo. Wobva wawedzera LID. uye iwe uchaona (uye kunzwa) iko kumanikidza kushanda zvakare !!! Zvino deredza kana kuwedzera kupinza kuwana (muSolera kana pamberi, sezvaunoda) uye iwe uchaona kuti compression icharamba ichishanda zvakaenzana; yakanyatsozvimiririra, yakazvimirira padanho rekurira uye zvinoenderana chete neRatio, Knee uye zvemukati. Izvi zvingashandiswa sei? Kana iwe uine yakawandisa dynamic muruzha, kuenda eg kubva -3, -6 dB Vu (kana zvishoma) kusvika +12 dB; Kana iwe uchida kudzvanya mazinga akaderera iwe uchanzwa ruzha "kupomba" kana ruzha rwasvika paPamusoro mazinga uye chinhu chimwe chete chekuita neyakajairwa compressor ichave yekuwedzera chikumbaridzo kununura imwe airiness mukunzwika. Asi kana uchiita izvozvo compressor haichashande pamazinga akaderera uye iwe unonzwa mimwe misiyano yekurira (mune temu density, nzvimbo yekugara, zviyo etc…) kunyanya kana compressor yatanga kushanda. NeSolera LID., gadzirisa chikumbaridzo uye reshiyo paMatanho epamusoro kune zvaunofunga kuti OK, wobva wawedzera LID. (kubva pa20 kusvika ku50%) uye teerera ikozvino mazinga akaderera uye kunyanya kushanduka pakati peKudzika neKumusoro. Iwe unogona zvakare kutanga kuwedzera reshiyo kuti uwedzere mhedzisiro. Iwe unobva waona kuti kudzvanya kuchagara kuchishanda asi kuchiri kukwanisa kutarisira Yepamusoro, mazinga eruzha (kunze kwekunge waisa 100% LID.) uye ita kuti compression inyatso kutsvedzerera uye kusazopomba… Pamusoro peiyo Dynamic Ratio basa, iwe unozokwanisa kuseta inogara uye yakasarudzika envelopu inobvumira kuwedzera yakaderera mazinga, yakaderera frequency uye kuchengetedza yakakosha inotenderera.
7.5 LID. Chikumbaridzo (65)
Inoisa iyo yekuwana huwandu hweLID parameter. -Kumusoro: Kuwedzera kweLID chiito - Pasi: Kuderera kweLID chiito
Ikozvino LID Threshold value inoratidzwa nemitsetse miviri yakasvibira paDynamic Activity display.
Cherechedza
KuCompressor uye DCompressor zvikamu, iyo LID chiito inoshanda chete kana orenji Dynamic Chiitiko (18) ichipfuura nzvimbo iri pakati pemitsetse miviri yegirinhi. Kune zvikamu zveExpander neDExpander, iyo LID chiito chinoshanda chete kana orenji Dynamic Activity (18) yagara mukati menzvimbo iri pakati pemitsetse miviri yegirinhi.
7.6 LID Maximum (66)
Kana uchinge wabatikana, chikumbaridzo chekugadzirisa chinotarirwa nehupamhi hwepamusoro kubva kuRMS / peak yekuona OR kubva pakuonekwa kwechiratidzo. Iyo L.I.D. Threshold ichiri kushanda, asi iyo L.I.D. bhatani rekusanganisa radzimwa. Iyi ficha inobvumira maitiro ese kuti awedzere kuita kune iyo chiratidzo chemukati. Zvakakodzera kuyedzwa pangoma dzengoma.
7.7 Chikumbaridzo (67)
Chikamu: dB
Value Range: -32 kusvika +16 (Compressor/DCompressor) -80 kusvika +16 (Expander/DExpander)
Default kukosha: 0
Inoisa chikumbaridzo cheiyo chaiyo dynamic process chikamu. Ichi dB chiyero chinoreva kukosha kweRMS.
Chikumbaridzo chinoshanda kukosha chinogadziriswa neLID, iyo LID Threshold uye, iyo LID Maximum marongero.
7.8 Chiyero (68)
Chikamu: dB
Kukosha Range: 1 kusvika 10
Nhanho: 0.01
Default kukosha: 1
Inoisa chiyero cheiyo chaiyo dynamic process chikamu.
Hukoshi hunoshanda hunogadziriswa nehuwandu hweDynamic Ratio.
7.9 Zvisingaperi (69)
Inoisa reshiyo kune inogoneka kukosha kwayo.
7.10 Range (70)
Chikamu: dB
Value Range: 0 kusvika 48/140/24/16 (Compressor/Expander/DCompressor/DExpander)
Default kukosha: 24/96/12/
Inoseta iyo yakanyanya kubvumidzwa kuwana mutsauko kune chaiyo dynamic processing chikamu.
7.11 Mabvi (71)
Chikamu: dB
Kukosha Kwemhando: 0 / +24
Default kukosha: 0
Inoisa kutsetseka kweiyo curve yekutumira kune chaiyo dynamic processing chikamu. Iyo curve inokwenenzverwa kutenderedza kukosha kwechikumbaridzo cheiyo dB huwandu hwakaiswa nehukoshi hwebvi.
7.12 Dynamic Chikamu Pa/Kudzima (72)
Inomutsa chikamu chaicho.
7.13 Compressor Section Selector (73)
7.14 DCompressor Chikamu Sarudzo (74)
7.15 Expander Section Selector (75)
7.16 Dexpander Chikamu Sarudzo (76)

8 Dynamic Sections Ratidza
8.1 Dynamic Chikamu Chiitiko (77)
12 dB chiyero
Kuwana kunoratidzwa kubva kuruboshwe kuenda kurudyi kuti uwane kuwedzera, iyo pfuma inoratidzwa kubva kurudyi kuenda kuruboshwe kuti uwane kuderera.

Zvinotsanangurwa

Kugadzirisa Zvinotsanangurwa - Alchemist

• Kusvikira ku16 chiteshi Input/Output for Essential version.
• 64-bits yemukati inoyangarara poindi kugadzirisa.
• Sampling rate inosvika 384 kHz DXD (Pyramix uye Ovation MassCore/Native).
• Sampling rate inosvika 192 kHz yeNative (AU/VST/VST3/AAX/AAX AudioSuite).

Kugadzirisa Zvinotsanangurwa - Alchemist Session

• Mono/Stereo Input/Output.
• 64-bits yemukati inoyangarara-point kugadzirisa.
• SampLing rate inosvika 96 kHz.

Kugarisana
BitterSweet Pro

• Windows - 10 64 bits.
  - VST (2.4) mu64 bit
  - VST (3.1) mu64 bit
  - AAX Native/DSP* mu64 bit
  - AAX AudioSuite * mu64 bit
  -Waves WPAPI Native / Soundgrid mu64 bit
  - VS3** Pyramix 10 uye zvimwe mu64 bit uye Oover 6 nezvimwe
  - Avid Nzvimbo Systems
• macOS (Intel uye ARM) - 10.12 uye nezvimwe, 11 uye 12.
  - VST (2.4) mu64 bit
  - VST3 (3.1) mu64 bit
  - AU mu64 bit
  - AAX Native/DSP* mu64 bit
  - AAX AudioSuite * mu64 bit
  -Waves WPAPI Native / Soundgrid mu64 bit
  - Avid Nzvimbo Systems

** VS3 yePyramix&Ovation Native/MassCore inotengeswa chete kuburikidza neMerging Technologies uye vatengesi vane mvumo.
Rezinesi Zvinodiwa
Kuti ushandise Alchemist kana Alchemist Session, iLok.com mushandisi account inodiwa (iyo iLok USB Smart Key haidiwi).

Appendies

A Release Notes
A.1 Vaka 23.07.50310 - Zvose plugins
A.1.1 Zvitsva zvitsva

• Tsigira Pro Zvishandiso mafomu matsva

A.1.2 Kugadziriswa kweBugs

• Zvose plugins - Nuendo - VST3 - kuparara kana stereo plugins anomisikidzwa pamultichannel tracks (StereoTools, ...)
• Zvose plugins -Kumhanya kwakadzivirirwa plugins kutadza kuongorora paDa Vinci Resolve mac
• Zvose plugins -Popups zvisizvo metrics kana uchichinja skrini
• Zvose plugins - Presets haina kutorwa kunze kwenyika
• Zvose plugins - VST3 - Nuendo - WIN (UHD360) - Yakashata saizi yehwindo init
• Zvose plugins - VST3 - WIN (UHD630) - REAPER - GUI inozorodza nyaya kana iri mune imwe hwindo modhi.
• Zvose plugins - GUI nyaya ine AMD magiraidhi pamahwindo - flickering nyaya
• Zvose plugins - AU - Plugins maparameter anogadzikwa patsva kana achibhowekana muReaper
• Zvose plugins - VST2 - hapana multichannel ine plugins 23.X muna Reaper
• Zvose plugins - VST - Kudzoreredza iyo GUI haigadzirise iyo inoyangarara hwindo saizi muNuendo paWindows ine UHD630 mifananidzo.
• Bittersweet - VST3 - kubondera paPyramix nekukasira
• StereoTool / EVO Channel - VST3 - Hapana goniometer / analyzer muWavelab
• Elixir - Haisi kuwanikwa se32 chiteshi muReaper
• EVO yakatevedzana - AAX - Yakasviba Mode isiriyo GUI init
• EVO yakatevedzana - bvisa zvisina kushandiswa uye zvakadzokororwa presets
• EVO Channel - VST3 - spectrum smoothing slider inorovera Studio yekutanga
• EVO Channel / EVO Eq - VST3 - Analyzer isiri kushanda muAbleton Live
• EVO Channel / EVO Eq - chiyero eq control inogara ichirodha pa auto modhi
• EVO Eq - zvinoshamisa kuburitswa pamamita
• EVO In - GUI inozorodza nyaya kana uchichinja husiku / zuva modhi
• EVO Kubata - Zero Kuyambuka Threshold label isipo mugeek panel
• EVO Kubata - frequency bhendi yekusarudza haigaro yeuka zvigadziriso zvakanaka pakurodha zvakare
• EVO Kubata / EVO Channel - Frequency renji inotsvedza yakaoma kubata
• Yakachena Serie - VST3 - Attack kukosha max 80ms
• Pure Comp - Kuparara kana uchirodha "Bass gitare" preset
• Yakachena Limiter - VST3 - yepamberi modhi haibatire magadzirirwo epamberi
• StereoTool - VST3 - vector scope isiri kushanda muAbleton Live paWindows
• StereoTool - Haisi kushanda muFinal Cheka Pro
• TRAX - Kupaza uchishandisa oversampkugara nezvikamu zvakaiswa pa2FS kana kupfuura
• TRAX Tr - isingashandiswe muProtools zvakare (vaka 50123)

A.1.3 Nyaya dzinozivikanwa

• Zvose plugins - VST - GUI nyaya muIzotope Ozone uye RX
• Zvose plugins - AAX - Preset maneja - Default preset haina kuiswa kune parameter panguva yeplugin instantiation
• Elixir - Latency haina kubhadharwa zvakanaka mushure mekuchinja stage paramita kukosha muVST uye AudioUnit
• TRAX tr - Dzidza basa rekudzorera maitiro asina kunaka
• VerbV3 - HOA 3rd kurongeka kusashanda nemazvo

A.2 Vaka 23.1.0.50251 - Zvose plugins
A.2.1 Zvitsva zvitsva

• New plugins Evo Compressor, Evo Touch uye Evo EQ.
• VST3 rutsigiro
• ARM rutsigiro rweAAX, AU uye VST3
• Plugins zvino anogona resize
• Elixir ikozvino inotsigira 32 chiteshi
• Alchemist, BitterSweet, Epure, Pure Compressor, Pure DCompressor, Pure Expander, Pure DExpander, PureLimiter, Solera, Syrah ikozvino inotsigira 16 nzira.

A.2.2 Kugadziriswa kweBugs

• Zvose plugins - Preset Maneja - Gadziridza mushandisi preset haishande
• Zvose plugins - Preset maneja - Kupwanya kana kuomesa kana uchichengetedza preset
• Zvose plugins - UI inogona kunge yakasviba paIntel UHD 630 makadhi emifananidzo
• Zvose plugins - AU/VST3 - Preset maneja - Default preset haina kuiswa kune parameter panguva yeplugin instantiation.
• Zvose plugins - AAX - Kupaza neOSC paunenge uchichinja fx slot muPro Zvishandiso
• Zvose plugins - AU - Logic Pro - otomatiki ye boolean / integer paramita yakaputswa
• Zvose plugins - AU - Plugins tsaona muDa Vinci Resolve
• Zvose plugins - DaVinci Resolve - VST - UI yakaderedzwa
• Zvose plugins - Streamlabs - Plugins usashande
• Zvose plugins - Rezinesi nyaya muDaVinci Resolve uye GarageBand
• Alchemist - Iyo parameter yemhando inoshanda chete kune yekutanga bhendi
• BitterSweet - Hazvigoneke kugadzirisa iyo Output kuwana mushure mekuisunungura
• BitterSweet -Kubuda kwekuwana hakuna kurodha zvakare nemazvo kana chinongedzo chakadzimwa
• BSPro - mamwe modhi haawanikwe nekuda kweGUI nyaya
• Epure - macOS - Yakashata graphic scale kutanga pa 2 & 4FS
• Evo Channel - Meter referensi haina kuchengetwa
• Syrah - Kuparara kana uchisarudza preset "Static kukurumidza compression"
• TRAX Tr - Kana chinongedzo chaitwa, iyo Formant inotsvedza haina inotarisirwa mhedzisiro.
• TRAX Tr - ProTools - Nyaya muAudioStudio kana iyo modulation yakagoneswa
• VerbSession/VerbSession Studio Session uye BSPro StudioSession - Pyramix - VST tsaona kana yasimbiswa.
• Verb / Verb Studio Session - Kuparara kana uchirodha zvakare chikamu chine maviri zviitiko

A.2.3 Nyaya dzinozivikanwa

• Zvose plugins - VST - GUI nyaya muIzotope Ozone uye RX
• Zvose plugins - AAX - Preset maneja - Default preset haina kuiswa kune parameter panguva yeplugin instantiation
• Elixir - Latency haina kubhadharwa zvakanaka mushure mekuchinja stage paramita kukosha muVST uye AudioUnit
• TRAX tr - Dzidza basa rekudzorera maitiro asina kunaka
• VerbV3 - HOA 3rd kurongeka kusashanda nemazvo

A.3 Vaka 21.12.0.50123 - Zvose plugins kunze kweTRAX uye StudioSession
Bug kugadzirisa

• Zvose plugins AudioUnit - GUI nyaya ine Hdpi inoratidza pane macOS Monterey
• Zvose plugins VST - Plugin scan inomisa muWavelab 11 paMac M1 michina
• Zvose plugins VST - Kuparara muAdobe Audition pane macOS
• Zvose plugins VST macOS - Gadzirisa tsaona neAbleton rarama
• Elixir - otomatiki haina kuverengerwa yekushandura ma paramita.
• Elixir - Crash kana uchidzvanya pane bhatani rezvigadziriso paSession vhezheni
• Elixir - Zvizhinji zvinogadzirisa paUI
• Elixir - Windows AAX - Nyoresa nyaya ine zviitiko zviviri muProTools
• Inzwa - Bypass iri kushanda muAAX
• Inzwa AAX - Kupaza paunenge uchiita bhiza pasina pamhepo pa macOS
• Inzwa AAX - Kupaza paunenge uchigadzirisa matrix pane macOS
• Inzwa AAX - Stereo - Shanduko paMatrix haishandiswe kudzamara tachinja preset
• Inzwa AudioUnit - Ableton inorovera pakuisa yechipiri chiitiko

A.4 Vaka 21.11.0.50107 (Hear, IRCAM Verb)
CHERECHEDZA: Parizvino HAZVISIRI KUTEVERA NEABLETON LIVE MACOS
Kuvandudza

• Inzwa - 5.1.4 & 5.0.4 ikozvino iripo

Bug kugadzirisa

• INZWA - Gadzirisa mita yekuzorodza nyaya
• Inzwa - Hapana chiito pane mamwe presets
• Inzwa - MaProtools anopunzika kana uchiita offline bounce pa macOS

A.5 FLUX:: Kunyura - Plugins (kusanganisira IRCAM Zvishandiso) 21.09
Kuburitswa uku kunosanganisira zvigadziriso zveese FLUX ::Immersive plugin processing products kunze kweEVO Channel, Epure, IRCAM Trax, Studio Session.
CHERECHEDZA: Parizvino HAZVISIRI KUTEVERA NEABLETON LIVE MACOS
Major optimizations

• Apple makomputa Big Sur (nyowani M1 chips) AU kusimbiswa
• Yakakosha zvigadziriso kuIrcam Verb + Session
• Pakazara zvirinani kubata kwemultichannel track setups seAtmos. (Ircam Inzwa, Verb uye nezvimwe)
• Kuzvionera otomatiki kwefomati / chiteshi kurongeka kweDAWs pazvinogoneka.

A.5.1 Vaka 21.9.0.50083
Bug kugadzirisa

• Apple makomputa Big Sur (nyowani M1 machipi) AU kusimbiswa kwatadza
• Empty GUI kana yavhara/vhurazve plugin - Windows 10 - UHD630 mifananidzo
• AudioUnit muReaper - usaite odhiyo kana isina kubhuroka
• Default preset haina kurodha nemazvo pakumisikidzwa kweVerb + Verb Session
• Evo.Channel paRetina – Input and Output Sliders yakashata
• Isingaenderani AudioUnit nyaya muApple Final Cheka Pro
• Plugins: Rangarira Preset Mireza (semuenzaniso "Zvese asi setup") rangarira nguva dzose zvese
• Preset Maneja - UI nyaya ine diki plugins kana preset yagadzirwa
• Ircam Verb Session kurodhazve muVST nekukanganiswa kwekuteerera
• VST Plugins Session haina kurodha zvakare kana ikabatanidza shanduko yeIO
• Chikamu chechiito - Yakaoma / yakanyorova haina kuiswa mumhepo yekupa
• Verb v3 Atmos kuparara paAAX
• Verb: Kusimbiswa kweAU kwakundikana paApple M1
• Verb: LFE haina kuremara nekusarudzika paProTools
• Verb: Recall Preset inogona kunge isiri iyo nekudzvanya kaviri mukati me preset maneja
• Verb: chiteshi chakaremara hachina kubaiwazve zvichienderana nekuoma / kunyorova parameter (100% wet zvinoreva kubviswa)
• Verb: init nyaya naNuendo
• AAX - Zvimwe plugins -Kuparara paMac / Hapana GUI paWindows
• Kuvimbika kwese / kugadzikana kunogadzirisa.
• Saizi yeplugin haina kunaka
• Potential plugins kuparara pakuvhura UI

A.6 FLUX:: Kunyura - Plugins (kusanganisira IRCAM Zvishandiso) 20.12
Uku kuburitswa kukuru kunosanganisira zvigadziriso zveese FLUX ::Immersive zvigadzirwa kunze kwe IRCAM Spat V3 legacy chigadzirwa. Ndokumbira utarise kune Spat V3 - Spat Revolution crossgrade sarudzo.
Major optimizations

• HiDPI / Retina tsigiro + ratidza kusimudzira uye kugadzirisa
• Peji Tafura yekubatana yeAvid Kudzora, S1, S3, S4, S6 uye S6L.
• OSC Kudzora kwe plugins.
• IRCAM Verb rutsigiro rweDolby Atmos, Multichannel inotsigira anosvika gumi nematanhatu chiteshi
• IRCAM Inzwa - Multichannel kugadzikana kuvandudzwa, Zvino anosvika gumi chiteshi. (Dolby Atmos 10)
• IRCAM Zvishandiso - Audio I/O Matrix uye Multichannel kusimudzira
• Zvizhinji plugins rutsigiro rwe8 chiteshi.
• 16 chiteshi rutsigiro rweBittersweet Pro, Evo In uye Evo Channel

A.6.1 Vaka 20.12.0.49880
Bug kugadzirisa
Core:

• BSPro - Latency report nyaya (AAX)
• IRCAM TRAX Tr - Latency report nyaya
• IRCAM Verb - Kutadza kwekutanga kukosha kweReverb density
• IRCAM Verb -Dry sign ichiri kubuda mumatanho akaremara kana yakanyorova 100%
• Yese Pure Dynamics PI + Alchemist - Yakashata Thresholds yekutanga kukosha
• AAX "monolithic" yakaputsika seInzwa, TRAX nezvimwe…
• Anenge ese AAX plugins usadzorerezve paramita kubva ku47856 shanduro chikamu.
• Pure Limiter - Diff ficha yakapfuura iyo yekupinza kuwana.
• Pure Limiter - Inverted sidechain mafirita.
• Chero plugin kunze kweEvo Channel - Tsvagiridzo Presets inogadziridza kana tinya pane preset.
• Evo chiteshi - Zvisizvo tsika kana uchirodha patsva chikamu chekubata.

UI:

• Zita razvino reset rinonyangarika pakuvhurazve GUI kana chikamu

A.7 Nyaya Dzinozivikanwa

• Wavelab “Sample rate haina kutsigirwa” kana plugin ikaiswa pane clip, track kana chikamu chekubuda.
• TRAX Tr - Dzidza mafambiro anoratidza maitiro asina kunaka (AAX chete).
• Inzwa - Yemukati config mabhii anochinja kana chinja LFE yekuisa config kubva routing matrix.
• Paunenge uchishandisa OSC pane plugin muPro Tools, kuparara kuchaitika kana ukachinja/kufambisa FX isa slots.

Copyright (c) 2023 FLUX:: SE,
All Rights Reserved.

Zvinyorwa / Zvishandiso

FLUX Alchemist V3 Dynamic Processor [pdf] Bhuku reMushandisi Alchemist V3 Dynamic processor, Alchemist, V3 Dynamic processor, Dynamic processor, processor

References

• User Manual