Tšimo SET LED Driver Programming Tool
Buka ea Tataiso

eldoLED Field SET LED Driver Programming Tool

Programming Tool bakeng sa
Bakhanni ba LED ba Field SET™ bakeng sa Tšebeliso ea Tšimo

Selelekela

The Field SET Driver Programming Tool ho tloha eldoLED® ke sesebelisoa se tšoaroang ka letsoho se etselitsoeng likonteraka tsa motlakase, li-installers le baphatlalatsi ho etsa lenaneo le ho lokisa mekhoa ea ho sebetsa ea FieldSET Replacement LED Drivers. Sesebelisoa se sebetsa ka betri mme ha se hloke hore laptop e sebetse, e nolofalletsang tšebeliso e bonolo libakeng tse thata.
FieldSET Driver Programming Tool e khona ho hlophisa maemo a mabeli a bohlokoa ka ho fetisisa a mokhanni: Output Current (mA) le Minimum Dim Level. Sesebelisoa se na le ts'ebetso ea lenaneo la batch, e le hore li-parameter tse tšoanang li ka sebelisoa ho bakhanni ba bangata. The FieldSET LED Driver Programming Tool e ka sebelisoa ho BALA litekanyetso ho tsoa ho mokhanni ea teng oa OPTOTRONIC ®,
'me u hlophise liparamente tse tšoanang ho FieldSET
Phetoho ea Mokhanni oa LED. Ka mor'a hore litlhophiso tse teng tsa mokhanni li BALA, li-parameter li hlaha skrineng sa LCD le matšoao a LED, 'me li ka fetoloa ka tsela e nepahetseng.
Haeba mokhanni ea seng a ntse a le teng e se mokhanni oa mofuta oa OPTOTRONIC, litlhophiso tsa mokhanni li ka hlophisoa ka har'a sesebelisoa sa lenaneo 'me tsa hlophisoa ho mokhanni oa sebaka sa FieldSET.

Tšireletso ea Bohlokoa
Temoso Kotsi ea Tšisinyeho ea Motlakase

• Tlosa kapa tima motlakase pele o lokisa / o sebeletsa.
• Netefatsa hore phepelo voltage e nepahetse ka ho e bapisa le lintlha tsa leibole ea mokhanni e kentsoeng sebaka.
• Etsa likhokahano tsohle tsa motlakase le tse theiloeng fatše ho latela Khoutu ea Naha ea Motlakase (NEC) le litlhoko life kapa life tse sebetsang tsa khoutu ea lehae.

Ho nkela bakhanni ba teng sebaka ka bakhanni ba FieldSET ho tlameha ho etsoa ke ramotlakase/ rakonteraka ea motlakase.
Tiisetso e Lekanyelitsoeng ea Sehlahisoa e tla ba lefeela haeba rakonteraka ea nang le laesense a sa sebelisoe.
Bakhanni ba FieldSET ba reretsoe ho lokisoa ha masimo a luminaire a seng a kentsoe le ho sebetsa tšimong. Bakhanni ba FieldSET ha baa rereloa ho lokisa mabone ka ntle ho sebaka joalokaha ho hlalositsoe ho Article 100 ea NFPA 70, National Electrical Code.
Ha o sebelisa lisebelisoa tsa motlakase, mehato ea ts'ireletso ea mantlha e lokela ho lateloa kamehla, ho kenyelletsa le tse latelang:

• Se ke oa hokela sesebelisoa ha mokhanni a le matla.
• Se ke oa hokela sesebelisoa lehlakoreng la AC la mokhanni ha mokhanni a le matla.
• Hokela feela sesebelisoa pakeng tsa PRG le LED- lithakhisa tsa mokhanni.
• Tlhokomeliso: FieldSET LED Driver Programming Tool ha e na bopaki ba ho qhalana kapa ho ba metsi.

Ho qoba kotsi ea tšenyo ea boto ea LED kapa karolo, bakhanni ba FieldSET ha baa lokela ho hlophisoa hore ba be le motlakase o phahameng ho feta mokhanni ea kentsoeng hona joale le ho nkeloa sebaka / ho lokisoa.
Bakhanni ba FieldSET ka eldoLED ba koaheloa ke waranti e lekanyelitsoeng ea lilemo tse 5. Ena ke eona feela tiisetso e fanoeng 'me ha ho lipolelo tse ling tse hlahisang waranti ea mofuta ofe kapa ofe. Litiisetso tse ling tsohle tse hlakileng le tse boletsoeng ha li na thuso. Mantsoe a felletseng a tiisetso a ka fumanoa ho www.acuitybrands.com/support/warranty/terms-and-conditions

BOLOKA LITAELO TSENA HO SEBELISA TŠEBELETSO EA KA MOSO
Etela www.acuitybrands.com/support/warranty/terms-and-conditions

Thepa e Hlokehang

Lethathamo la Bakhanni ba LED ba tšehetsoeng

The FieldSET LED Driver Programming Tool e ka hlophisa bakhanni ba LED ba sebaka sa FieldSET ka li-parameter tse lakatsehang bakeng sa ho nkela sebaka tšimong. Ka tlase lethathamo la FieldSET Replacement LED Drivers.

FieldSET Replacement LED Driver List

Mehlala ea Bakhanni	Tlhaloso ea Mokhanni	Kopo	UPC
OTi 30W UNV 1A0 1DIM DIM-1 FS	30W Linear 120-277V; 0-10V, 1% min dim	Ka hare	1.97589E+11
OTi 50W UNV 1A4 1DIM DIM-1 FS	50W Linear 120-277V; 0-10V, 1% min dim	Ka hare	1.97589E+11
OTi 85W UNV 2A3 1DIM DIM-1 FS	85W Linear 120-277V; 0-10V, 1% min dim	Ka hare	1.97589E+11
OTi 25W UNV 1A2 1DIM DIM-1 FS	25W Compact 120-277V; 0-10V, 1% min dim	Ka hare	1.97589E+11
OTi 25W UNV 1A2 1DIM DIM-1 J-HOUSING FS	25W Compact 120-277V; 0-10V, 1% min dim	Ka hare	1.97589E+11
OTi 40W UNV 1A4 1DIM DIM-1 FS	40W Compact 120-277V; 0-10V, 1% min dim	Ka hare	1.97589E+11
OTi 40W UNV 1A4 1DIM DIM-1 J-HOUSING FS	40W Compact 120-277V; 0-10V, 1% min dim	Ka hare	1.97589E+11
OTi 100W UNV 1250C 2DIM P6 FS	100W Ka ntle 120-277V; 0-10V, 10% min dim	Industrial/ Kantle	1.97589E+11
OTi 180W UNV 1250C 2DIM P6 FS	180W Ka ntle 120-277V; 0-10V, 10% min dim	Industrial/ Kantle	1.97589E+11

FieldSET™ LED Driver Programming Tool hang-hang

4.1 Konopo Mesebetsi

1	Lenaneo la Cable Port	a. E lumella khokahanyo ea thapo ea lenaneo ho FieldSET Driver Programmer Tool
2	Micro USB	a. E hokela ho laptop bakeng sa liapdeite tsa software
3	Pontšo ea LCD	a. Pontšo ea LCD e tla hlahisa: Litlhophiso tsa hona joale tsa tlhahiso le likhoutu tsa liphoso b. Pontšo ea flash e bontša ketsahalo e atlehileng ea BALA/PROGRAM
4	BALA/ MATLA	a. Ha sesebediswa se TIMA, tobetsa o hatelle konopo ena bakeng sa motsotswana o 1 ho bulela sesebediswa b. Ha sesebelisoa se BUTSE 'me se hokahane hantle le mokhanni oa LED, konopo ena e tla bala litlhophiso tsa mokhanni c. Kamora ts'ebetso ea BALA, litlhophiso tsa hona joale tse hlahisoang li tla hlahisoa ponts'o, 'me boemo bo tlase ba ho fifala bo tla hlahisoa ke Minimum Dimming Indicators. d. Beep e utloahalang e utloahala nakong ea BALA ts'ebetso 'me e bonts'a mahlaseli ha e felile e. BALA ts'ebetso ea fumaneha bakeng sa OPTOTRONIC efe kapa efe ka mokhanni oa eldoLED f. Ho tima sesebelisoa, tobetsa 'me u tšoare konopo motsotsoana o le mong
5	MIN DIMMING Lipontšo	a. Letšoao la LED le bonesitsoeng le bonts'a boemo bo fokolang bo khethiloeng ba dim b. Lits'oants'o tse khanyang tsa LED li bonts'a hore Dim-to-Off e nolofalitsoe mme mokhanni o tla kena boemong ba standby, a tima phallo ea LED ha e fifala ka tlase ho boemo bo fokolang ba ho fifala. c. LED e tiileng e bonts'a hore Dim-to-Off e koetsoe. Mokhanni a ke ke a tima (0%) ka li-control tsa 0-10V; ke AC Mains feela e ka timang mokhanni.
6	MIN DIMMING Sekhethi	a. Mosebelisi a ka khetha Boemo bo fokolang ba ho fifala ho isa ho 1% (e putsoa), 5% (e mosehla), le 10% (lamunu) -e lekanyelitsoeng ke mefuta ea mokhanni ea teng ea lokelang ho nkeloa sebaka. b. 0% bonyane ba boemo ba dimming, bo tsejoang hape e le Dim-to-Off, bo ka khethoa ka ho sututsa le ho tšoara konopo ea Min Dimming metsotsoana e 3.
7	LENANEO	a. Mosebetsi oa PROGRAM o tla sebelisa li-parameter tse bontšitsoeng ho mokhanni ea hokahaneng b. Beep e utloahalang e utluoa nakong ea ts'ebetso ea PROGRAM le mahlaseli a pontšo ha a atleha c. Mosebetsi oa PROGRAM oa fumaneha bakeng sa bakhanni ba FieldSET LED (sheba tafole FieldSET Replacement LED Driver List)
8/9	NTHAKOANE SEBAKA	a. Mosebelisi a ka beha maemo a hona joale a tlhahiso a sebelisa likonopo tsa ho nyolla holimo / tlase kahare ho 150-3000mA.

Lisebelisoa tsa Hardware

HLOKOMELA: Ho khothaletsoa ka matla hore u tlose mokhanni eo u mo nkelang sebaka pele u latela mehato e ka tlase. Mokhanni o tlameha ho khaoloa ho Mains Power pele a tlosa kapa a etsa likhokahano.

Mohato oa 1
Hokela thapo ea lenaneo ho FieldSET Driver Programming Tool

Mohato oa 2
Hokela cable ea programming ho driver'

Mohato oa 3
Hokela thapo ea lenaneo ho mokhanni PRG le LED Red POS (+) le Black NEG (-) litheminale ho mokhanni.

Linear	Compact	Kantle
Tlhokomeliso: Kopano ea phini e tlameha ho hatelloa hanyenyane bakeng sa mefuta ea mela ho lumellana le molumo oa terminal.
Linear/Compact: PRG = LED e sootho- = Boputsoa		Kantle: PRG = Orange LED- = Boputsoa

Tlhophiso le Ts'ebetso ea Bakhanni

6.1 Bulela/tima sesebelisoa

1. Tobetsa 'me u tšoare konopo ea BALA / MATLA metsotsoana ea 3 ho bulela Sesebelisoa sa Lenaneo la Driver la FieldSET.
   a. Pontšo e tla benya 'me beep e utloahaleng e bontša hore e BUTSOE.
   b. Pontšo e tla bonts'a li-zero tse habeli (00) ha ho qala (ntle ho lebokose) ho qala. Kamora ts'ebeliso ea pele, ponts'o le matšoao a LED li tla bonts'a litlhophiso tse kentsoeng nakong e fetileng ha moetsi oa lenaneo a buletsoe.
   c. Haeba sesebediswa se sa BULE, hlahloba hore na dibetri di kentswe hantle le ho tjhajiwa. Sesebelisoa se sebelisa (1) 9V betri.
2. Sesebelisoa se se se loketse ho sebelisoa.
3. Ho tima sesebelisoa, tobetsa 'me u tšoare BALA/MATLA ka metsotsoana e 5.

6.2 BALA litekanyetso ho tsoa ho mokhanni oa pele oa OPTOTRONIC (hlokomela: mehato ea 6.2 e sebetsa feela ho bakhanni ba OPTOTRONIC)

1. Etsa bonnete ba hore mokhanni ea teng ha a na matla.
2. Tobetsa konopo ea BALA ho kenya Read Mode 1.
3. Hokela thapo ea lenaneo ho mokhanni oa mantlha oa PRG le liteishene tsa LED(-).
   a. Beep e utloahalang le flash flash li bontša hore BALA e atlehile.
4. Litlhophiso tsa mokhanni li tla kengoa sesebelisoa sa lenaneo ebe li hlahisoa ho LCD le matšoao a LED.
5. Tobetsa konopo ea BALA hape ho tsoa molemong oa BALA. Litlhophiso li tla bolokoa.
   HLOKOMELA: Mokhoa oa 1 o lumella mosebelisi ho iketsetsa mokhanni ka litlhophiso tseo a li ratang.
   FieldSET Programming Tool e fetotsoe ho Mode 1.
   Ho sebelisa FieldSET Programming Tool ho Mode 2 ho lumella mosebedisi ho kopitsa le ho beha litlhophiso tsa pele tsa mokhanni empa ha a lumelle mosebedisi ho fetola maemo a mokhanni. Bakeng sa litaelo tsa lenaneo la Mode 2, sheba Sehlomathiso sa Bukana ea Mosebelisi ea FieldSET.

6.3 Fetola liparamente

1. Sebelisa CURRENT SET ho fetola tlhahiso ea hona joale.
2. Sebelisa khetho ea MIN DIMMING ho fetola boemo ba bonyane ba ho fifala.
3. Haeba mokhanni a hloka ho khutsufatsoa (mokhoa oa standby) ka sistimi ea taolo ea 0-10V, Dim-to-Off e ka lumelloa ka ho sututsa le ho ts'oara MIN DIMMING.
   TLHOKOMELISO: Ho eketsa boemo ba koloi ea hona joale (mA) ea mokhanni e mong ho tla tlōla litlhoko tsa ho fapanyetsana ha bakhanni ba nkoang e le Sehlopha sa P ke Underwriters Laboratories.

6.4 LENANEO la mokhanni oa sebaka sa FieldSET

1. Etsa bonnete ba hore mokhanni ha a na matla.
2. Hang ha litlhophiso tse nepahetseng li kentsoe ho Sesebelisoa sa Lenaneo, tobetsa konopo ea PROGRAM ho kenya mokhoa oa lenaneo.
   a. Sesebelisoa se tla lla ebe se emela ho hokela mokhanni
3. Hokela thapo ea lenaneo ho li-terminals tsa FieldSET driver PRG le LED(-).
   a. Beep e utloahalang le flash flash li bontša PROGRAM e atlehileng
4. Tobetsa konopo ea PROGRAM hape ho tsoa ho mokhoa oa ho etsa mananeo.
5. FieldSET Driver e se e loketse ho kenya. Sheba litaelo tsa mohala oa mokhanni.

Lenaneo la ho khanna

Ho na le maemo a mararo ha u nkela mokhanni ea kentsoeng sebakeng sa pele. Ka kopo sheba litaelo tse latelang bakeng sa boemo ba lenaneo bo sebetsang sebakeng sa hau:

Boemo ba 1
Mokhanni oa pele ke mokhanni o hlophisitsoeng oa OPTOTRONIC LED
Mohato oa 1
Hokela Cable ea Programming ho FieldSET Programmer ebe o tobetsa le ho tšoara konopo ea POWER ho bulela.
Screen e tla kenya li-setting ka bo eona ho tloha ha e sebelisoa pele.
Mohato oa 2
Ho bala litlhophiso ho tsoa ho Mokhanni oa Pele, tobetsa konopo ea BALA ebe o hokela Cable ea Programming ho Mokhanni oa Pele (etsa bonnete ba hore mokhanni ha a na matla). Haeba Read e atlehile, skrine e tla benya, molumo o utloahalang o tla utloahala, 'me litlhophiso tse hlophisitsoeng tsa mokhanni li tla hlahisoa skrineng le matšoao a LED.
Mohato oa 3
Etsa liphetoho tse hlokahalang ho litlhophiso tsa lenaneo (haeba ho hlokahala). Sebelisa likonopo tsa CURRENT SET ho lokisa boemo ba hona joale mme u sebelise konopo ea MIN DIMMING ho lokisa boemo bo tlase ba ho fifala. Haeba FieldSET Replacement Driver e lokela ho lumellana hantle le tshebetso ea Mokhanni oa Pele, u se ke ua etsa liphetoho leha e le life ho litlhophiso.
TLHOKOMELISO: Ho eketsa boemo ba koloi ea hona joale (mA) ea mokhanni e mong ho tla tlōla litlhokahalo tsa UL Class P tsa phetoho.
Mohato oa 4
Ho kenya litlhophiso ho FieldSET Replacement Driver, tobetsa pele konopo ea PROGRAM ebe o hokela Cable ea Programming ho FieldSET Replacement Driver. Haeba li-setting li kentsoe ka katleho, skrineng se tla bonesa HO QETILE 'me molumo o utloahalang o tla utluoa. Tobetsa konopo ea PROGRAM hape ho tsoa ho mokhoa oa ho etsa mananeo.
Boemo ba 2
Mokhanni oa mantlha ke lets'oao ntle le OPTOTRONIC 'me o na le leibole e kenyelletsang tlhahiso ea hajoale (mA kapa A) le/kapa maemo a dim
Mohato oa 1
Hokela Cable ea Programming ho FieldSET Driver Programmer Tool ebe o tobetsa le ho tšoara konopo ea POWER ho bulela. Screen e tla kenya litlhophiso ka bo eona ho tloha ha e sebelisoa pele.
Mohato oa 2
Sebelisa likonopo tsa CURRENT SET ho lokisa boemo ba hajoale skrineng le ho sebelisa konopo ea MIN DIMMING ho lokisa boemo bo tlase ba ho fifala hore bo tsamaisane le litlhophiso tse thathamisitsoeng leiboleng ea Mokhanni oa Pele.
Mohato oa 3
Ho kenya litlhophiso ho FieldSET Replacement Driver, tobetsa pele konopo ea PROGRAM ebe o hokela Cable ea Programming ho FieldSET Replacement Driver. Haeba li-setting li kentsoe ka katleho, skrineng se tla bonesa HO QETILE 'me molumo o utloahalang o tla utluoa. Tobetsa konopo ea PROGRAM hape ho tsoa ho mokhoa oa ho etsa mananeo.
Boemo ba 3
Mokhanni oa mantlha ke lets'oao ntle le OPTOTRONIC 'me ha a na leibole e kenyelletsang tlhahiso ea hajoale (mA kapa A) le/kapa maemo a dim

Ikopanye le moetsi oa thepa 'me u botse litlhophiso tsa mokhanni tse sebelisoang leboneng. Ka tloaelo, ba tla khona ho sheba tlhahisoleseling ena ka nomoro ea karolo / tlhaloso. Haeba moetsi oa thepa a le sieo, kapa a sa khone ho fana ka litlhophiso tsa mokhanni, khetho e le 'ngoe feela ke ho lekanya tlhahiso ea mokhanni hona joale le boemo bo fokolang tsamaisong ea ho sebetsa. Litekanyo li lokela ho etsoa feela ke basebetsi ba nang le tsebo ba nang le phihlelo ea motlakase kapa koetliso ea motheo. Etela sebaka se ts'oanang sa mabone a sebetsang (nomoro e ts'oanang ea karolo) ho etsa litekanyo (ho hlokahala multimeter.)

Mehato ea Tekanyo – Output Current (mA):

• Tlosa sesebelisoa 'me u kene ho Driver.
• Hakolla lithapo life kapa life tse hoketsoeng ho DIM(+) PURPLE ea Driver le DIM(-) GRAY kapa PINK terminals/lithapo. DIM(+) le DIM(-) e lokela ho ba potoloho e bulehileng e le hore Driver e hlahise 100% ha e matlafalitsoe.
• Beha Multimeter ho lekanya DC hajoale (mA).
• Hokela Multimeter ho lekanya tlhahiso ea Mokhanni ho LED.
• Haeba u sebelisa Cl ea Hona joaleamp Batla, clamp ho potoloha terata ea LED(+) RED e hlahisoang ke Mokhanni.
• Haeba u sebelisa Test Leads, u tla hloka ho senya kamano pakeng tsa Mokhanni oa LED(+) RED output le ea LED (+).
  Hokela Test Leads ka letoto ho koala potoloho.
• Matlafatsa sesebelisoa ka mokhoa o sireletsehileng 'me u lekanye tlhahiso ea hona joale (mA). Ela hloko boleng bona ho sebelisoa hamorao. Fokotsa sebopeho sa motlakase.
  Tlohela Multimeter e hokahane bakeng sa tekanyo e fokolang ea boemo ba dim.

Mehato ea Tekanyo - Boemo bo fokolang ba Dim:

• Ho metha bonyane ba dim level, boloka Multimeter e kentsoe ka tsela e tšoanang le ea pele, 'me u khutsufatse DIM(+) PURPLE ea Driver le DIM(-) GRAY kapa PINK terminals/lithapo. Ho khutsufatsa DIM(+) le DIM(-) ho tla qobella Mokhanni ho fokotsa tlhahiso ea eona ho isa boemong bo tlase. Ka kopo hlokomela, bonyane boemo ba dimming e ka ba 0% (theoha).
• Sena se ka finyelloa ka ho kenya jumper ea terata, koporo e tiileng 16-22 AWG, pakeng tsa DIM(+) PURPLE le DIM(-) GRAY kapa PINK.
• Haeba mokhanni a e-na le lisebelisoa tse fofang, feela kopanya DIM(+) le DIM(-) hammoho u sebelisa mokhoa oa WAGO Quick Connect kapa tse ling tse tšoanang.
• Matlafatsa sesebelisoa ka mokhoa o sireletsehileng 'me u lekanye tlhahiso ea hona joale (mA) nakong ea boemo bo lefifi ka Multimeter.
• Bala bonyane ba boemo ba dimming: Arola tlhahiso ea hona joale nakong ea boemo bo fifalang bo felletseng ka tlhahiso ea hona joale nakong ea boemo bo felletseng ba 100%. Mohlomong e tla ba 1%, 5%, kapa 10%. Ela hloko boleng bona ho sebelisoa hamorao.
• Fokotsa sebopeho sa motlakase. Tlosa Multimeter 'me u boele u kenye sesebelisoa.

Mohato oa 1
Hokela Cable ea Programming ho FieldSET Programmer ebe o tobetsa le ho tšoara konopo ea POWER ho bulela. Screen e tla kenya litlhophiso ka bo eona ho tloha ha e sebelisoa pele.
Mohato oa 2
Sebelisa likonopo tsa CURRENT SET ho lokisa boemo ba hajoale skrineng 'me u sebelise konopo ea MIN DIMMING ho lokisa boemo bo tlase ba ho fifala ho tsamaisana le litlhophiso tse lekantsoeng ho tsoa ho sesebelisoa se ts'oanang.
Mohato oa 3
Ho kenya litlhophiso ho FieldSET Replacement Driver, tobetsa pele konopo ea PROGRAM ebe o hokela Cable ea Programming ho FieldSET Replacement Driver. Haeba li-setting li kentsoe ka katleho, skrineng se tla bonesa HO QETILE 'me molumo o utloahalang o tla utluoa. Tobetsa konopo ea PROGRAM hape ho tsoa ho mokhoa oa ho etsa mananeo.

Likhoutu tsa Phoso

Likhoutu tse fapaneng tsa liphoso li tla hlahisoa skrineng sa LCD maemong afe kapa afe a boletsoeng tafoleng e ka tlase:

Molaetsa oa Phoso	Tlhaloso ea Phoso
Er:01 HLOKA	Phoso ea puisano nakong ea ho bala. Sheba khokahano ho mokhanni.
Er:02 HLOKA	Phoso ea puisano nakong ea lenaneo. Sheba khokahano le mokhanni.
Er:03 NoRd	Mokhanni ha a tsejoe ke sesebelisoa sa lenaneo.
Er:04 Ke HI	Sebaka sa hajoale se phahame haholo bakeng sa mokhanni o hokahaneng.
Er:05 Ke Lo	Sebaka sa hajoale se tlase haholo bakeng sa mokhanni ea hoketsoeng.
Er:06 likhama	Boemo bo fokolang ba dim ha bo tšehetsoe ke mokhanni o hokahaneng.
Er:07 Notec	Tšireletso e fosahetseng ea mocheso e nyenyefatsang boleng ba data.
Er:08 CLO	Lintlha tse fosahetseng tsa tlhahiso ea lumen kamehla.
Er: 09 ho joalo	Lintlha tse fosahetseng tsa 0-10V tsa moeli o fokolang.
Er:10 C Id	Ho leka mokhanni oa lenaneo ha ho lumellane le data e bolokiloeng.
Er:11 Nap	Tool ha e tšehetse ho hlophisa mokhanni o hokahaneng.
bat	Betri e tlase; fetola betri.
Laela	Lithapo ho mokhanni li khutsufalitsoe kapa li-programming pins li kenngoa morao.

Phetoho ea Battery

a. Sesebelisoa sa Lenaneo se tsamaisoa ke 1 x betri (9V)
b. Bula karolo ea betri ho fihlella betri

Litlhaloso

Matla

Keletso Voltage (DC)	9V (Betri e ea sebetsa)
Sesebelisoa sa USB	USB 1.1 kapa 2.0
Mofuta oa Port Port ea USB	Micro-B
Bolelele ba Cable ea USB	3 maoto
Lenaneo la Cable	2-Conductor (22AWG) - Ka hare / Ka ntle
Programming Cable Bolelele	3 maoto

10.1 Litlhaloso tsa Tikoloho

Ambient Operating themes	0°C ho ea ho +50°C
Max. Mocheso oa polokelo. Melao ea Taolo	0°C ho ea ho +50°C
Maemo a Tikoloho	RoHS, FIHLELA
Boemo ba IP	IP20
EMI Compliance	FCC Karolo ea 15 Sehlopha sa A

10.2 Litlhaloso tsa Mechini
Matlo

Bolelele	6.5" (165mm)
Bophara	3.1" (80mm)
Bophahamo	1.1" (28mm)

Tlatsetso

Mokhoa oa 2 - Litaelo tsa Lenaneo la Mokhanni oa OPTOTRONIC

1. Etsa bonnete ba hore mokhanni ea teng ha a na matla.
2. Kopanya Programmer ho mokhanni oa LED
3. Bulela Programmer 'me u e boloke e tsitsitse (mabone a BALA LE A PROGRAM a timiloe - ha ho na molumo o hlabang)
4. Tobetsa konopo ea BALA & Current(-) ka nako e le 'ngoe ho kenya Mokhoa oa ho Bala 2 (bakeng sa metsotsoana e 3.)
   Skrine se tla bonts'a "OP_2" le ho benya ka tlhahiso e kopilitsoeng hona joale le dim profile.
   a. Sesebelisoa se tla lla ebe se emela ho hokela mokhanni.
5. Hokela thapo ea lenaneo ho mokhanni oa mantlha oa PRG le liteishene tsa LED(-).
   a. Beep e utloahalang le flash flash li bontša hore BALA e atlehile.
6. Litlhophiso tsa mokhanni li tla kengoa ho sesebelisoa sa lenaneo. Pontšo e tla bonts'a feela tlhahiso ea hajoale, boemo ba dimming le boemo ba D2O (ts'ebetso efe kapa efe e kang CLO haeba e kopitsoe e ke ke ea bonahala.)
7. Tobetsa konopo ea BALA hape ho tsoa molemong oa BALA. Litlhophiso li tla bolokoa. Ho Read Mode 2, li-parameter ha li khone ho fetoloa.

ELA HLOKO: Litlhophiso lia bolokoa le ha sebatli se tingoa (sena se bonahala ha "OT_2" e benya ho LCD.
HO TLOSA LITEBISO TSE BOLOKILENG: Beha yuniti sebakeng se tsitsitseng (BALA LE MAbone a LENANEO a tingoe) 'me u bale mokhanni. U ke ke ua bona "OT_2" flash ho LCD.

https://qrs.ly/h6ed5w8
Fumana lisebelisoa tse ling ho
www.acuitybrands.com/FieldSET
Bakeng sa Tšehetso ea Tekheniki, ikopanye le 1-800-241-4754
or eldoLEDtechsupport@acuitybrands.com
www.acuitybrands.comLitlhaloso li ka fetoha ntle le tsebiso. Ts'ebetso ea 'nete e ka
e fapane ka lebaka la tikoloho le ts'ebeliso ea basebelisi ba ho qetela. One Lithonia Way, Conyers, GA 30012 | Fono: 877.353.6533 | www.acuitybrands.com
© 2023 Acuity Brands Lighting, Inc. Litokelo tsohle li sirelelitsoe. | EL_1554355.03_0723

Litokomane / Lisebelisoa

FieldSET eldoLED FieldSET LED Driver Programming Tool [pdf] Buka ea Taelo eldoLED FieldSET LED Driver Programming Tool, eldoLED, FieldSET LED Driver Programming Tool, LED Driver Programming Tool, Driver Programming Tool, Programming Tool

Litšupiso

• Bukana ea Mosebelisi