Munda SET LED Driver Programming Tool
Bhuku reMirayiridzo

eldoLED Munda SET LED Driver Programming Tool

Chirongwa Chekushandisa che
Munda SET™ Madhiraivha e LED ekutsiva Munda

Nhanganyaya

The Field SET Driver Programming Tool kubva ku eldoLED® chigadziro chemaoko chakagadzirirwa vashandi vemagetsi, vanoisa uye vanogovera kuti vagadzirise uye vagadzirise maitiro ekushanda eFieldSET Replacement LED Drivers. Chishandiso chacho chinoshanda nebhatiri uye hachidi kuti laptop ishande, ichigonesa kushandiswa kunoshanduka munzvimbo dzakasimba.
Iyo FieldSET Driver Programming Tool inokwanisa kuronga maviri akanyanya kukosha marongero emutyairi: Output Current (mA) uye Minimum Dim Level. Chishandiso chacho chakashongedzerwa nebatch programming mashandiro, kuitira kuti maparamita akafanana agone kushandiswa kune akawanda madhiraivha. Iyo FieldSET LED Driver Programming Tool inogona kushandiswa KUVERENGA paramita kubva kune iripo OPTOTRONIC ® mutyairi,
uye ronga iwo maparamita akafanana kune FieldSET
Kutsiva LED Driver. Mushure mezvirongwa zvemutyairi zviripo VERENGA, maparameter anoonekwa paLCD skrini uye zviratidzo zve LED, uye zvinogona kugadziriswa maererano.
Kana mutyairi aripo asiri OPTOTRONIC mhando mutyairi, marongero emutyairi anogona kugadzirwa mukati mechirongwa chekushandisa uye akarongwa mukutsiva FieldSET mutyairi.

Dziviriro Dzakakosha
Yambiro Ngozi yeMagetsi Shock

• Dimbura kana kudzima magetsi usati wagadzirisa/sevhisi.
• Wona kuti voltage ndeyechokwadi nekuienzanisa neyakatsiviwa mutyairi label ruzivo.
• Gadzira zvese zvinongedzo zvemagetsi uye zvepasi zvinoenderana neNational Electrical Code (NEC) uye chero inoshanda yekodhi kodhi zvinodiwa.

Kutsiviwa kwevatyairi varipo nevatyairi veFieldSET kunofanirwa kuitwa neane rezinesi wemagetsi / wemagetsi kondirakiti.
Iyo Product Limited Warranty ichave isina kana kontrakta ane rezinesi akasashandiswa.
Madhiraivha eFieldSET anoitirwa kugadzirisa-mumunda kwezvivheneko zvakatoiswa uye kushanda mumunda. Madhiraivha eFieldSET haana kuitirwa kugadziridzwa kunze kwesaiti yezvivheneko sezvinotsanangurwa muChinyorwa 100 cheNFPA 70, iyo National Electrical Code.
Paunenge uchishandisa zvigadzirwa zvemagetsi, ekutanga ekuchengetedza ekuchengetedza anofanirwa kuteedzerwa nguva dzose kusanganisira zvinotevera:

• Usabatanidza chishandiso kana mutyairi ane simba.
• Usa plug chishandiso kudivi re AC remutyairi kana mutyairi apihwa simba.
• Ingobatanidza chishandiso pakati pePRG neLED- mapini emutyairi.
• Yambiro: FieldSET LED Driver Programming Tool haisi yekudurura-uchapupu kana kunyorova yakayerwa.

Kuti udzivise njodzi yekukuvadzwa kubhodhi re LED kana chikamu, vatyairi veFieldSET havafanirwe kurongerwa kune yakakwira kubuda ikozvino kupfuura mutyairi akaiswa iye zvino uye achitsiviwa / kugadziriswa.
FieldSET vatyairi ne eldoLED vanofukidzwa ne5-year limited waranti. Iyi ndiyo chete waranti yakapihwa uye hapana zvimwe zvirevo zvinogadzira chero waranti yechero mhando. Mamwe ese anoratidza uye anoreva waranti anorambwa. Yakazara waranti mazwi anogona kuwanikwa pa www.acuitybrands.com/support/warranty/terms-and-conditions

CHENGESHA MIrairo IYI KUTI MUTE REFERENCE
Visit www.acuitybrands.com/support/warranty/terms-and-conditions

Chinodiwa Equipment

Inotsigirwa LED Driver List

Iyo FieldSET LED Driver Programming Tool inogona kuronga iyo FieldSET inotsiva madhiraivha e LED ine maparamita anodiwa ekutsiva mumunda. Pazasi pane rondedzero yeFieldSET Replacement LED Drivers.

FieldSET Replacement LED Driver List

Mutyairi Models	Tsanangudzo yemutyairi	Application	UPC
OTi 30W UNV 1A0 1DIM DIM-1 FS	30W Linear 120-277V; 0-10V, 1% min dim	Indoor	1.97589E+11
OTi 50W UNV 1A4 1DIM DIM-1 FS	50W Linear 120-277V; 0-10V, 1% min dim	Indoor	1.97589E+11
OTi 85W UNV 2A3 1DIM DIM-1 FS	85W Linear 120-277V; 0-10V, 1% min dim	Indoor	1.97589E+11
OTi 25W UNV 1A2 1DIM DIM-1 FS	25W Compact 120-277V; 0-10V, 1% min dim	Indoor	1.97589E+11
OTi 25W UNV 1A2 1DIM DIM-1 J-HOUSING FS	25W Compact 120-277V; 0-10V, 1% min dim	Indoor	1.97589E+11
OTi 40W UNV 1A4 1DIM DIM-1 FS	40W Compact 120-277V; 0-10V, 1% min dim	Indoor	1.97589E+11
OTi 40W UNV 1A4 1DIM DIM-1 J-HOUSING FS	40W Compact 120-277V; 0-10V, 1% min dim	Indoor	1.97589E+11
OTi 100W UNV 1250C 2DIM P6 FS	100W Kunze 120-277V; 0-10V, 10% min dim	Industrial/ Kunze	1.97589E+11
OTi 180W UNV 1250C 2DIM P6 FS	180W Kunze 120-277V; 0-10V, 10% min dim	Industrial/ Kunze	1.97589E+11

FieldSET™ LED Driver Programming Tool pane Kutarisa

4.1 Bhatani Mabasa

1	Programming Cable Port	a. Inobvumira kubatana kwetambo yekugadzira kuFieldSET Driver Programmer Tool
2	Micro USB	a. Inobatana nelaptop yekuvandudza software
3	Chiratidziro cheLCD	a. LCD inoratidzira ichave iripo: Kuburitsa ikozvino kuseta uye kukanganisa makodhi b. Ratidza flash rinoratidza rakabudirira VERENGA/PROGRAM chiitiko
4	VERENGA/SIMBA	a. Kana mudziyo WAKZIMA, baya uye bata bhatani iri kwesekondi 1 kuti ubatidze mudziyo b. Kana mudziyo uri ON uye wakanyatsobatanidzwa kumutyairi we LED, bhatani iri rinoverenga marongero emutyairi c. Mushure meKUVERENGA basa, zvinobuda zvigadziriso zvazvino zvicharatidzwa pachiratidziro, uye diki dimming level icharatidzwa neMinimum Dimming Indicators. d. Beep inonzwika inonzwika panguva yeKUVERENGA basa uye kuratidza kupenya kana kwapera e. VERENGA basa rinowanikwa kune chero OPTOTRONIC nemutyairi eldoLED f. Kuti udzime mudziyo, pusha uye bata bhatani kwesekondi imwe
5	MIN DIMMING Indicators	a. Yakavhenekerwa LED chiratidzo inoratidza yakasarudzwa yakaderera dim level b. Kupenya kwe LED zviratidzo zvinoratidza kuti Dim-to-Off inogoneswa uye mutyairi anopinda mumodhi yekumira, achidzima kubuda kwe LED kana yakadzimwa pazasi peiyo dimming level. c. Solid LED inoratidza kuti Dim-to-Off yakadzimwa. Mutyairi haakwanisi kudzimwa (0%) ne0-10V zvidzoreso; chete AC Mains inogona kudzima mutyairi.
6	MIN DIMMING Selector	a. Mushandisi anogona kusarudza iyo Minimum Dimming Level kusvika 1% (blue), 5% (yero), uye 10% (orenji) -inoganhurwa nehuwandu hwemutyairi aripo kuti atsive. b. 0% yakaderera dimming level, inozivikanwawo seDim-to-Off, inogona kusarudzwa nekusundidzira uye kubata bhatani reMin Dimming kwemasekonzi matatu.
7	PROGRAM	a. PROGRAM basa richashandisa paramita dzakaratidzwa kumutyairi akabatana b. Beep inonzwika inonzwika panguva yePROGRAM basa uye kuratidza kupenya kana kwakabudirira c. PROGRAM basa rinowanikwa kune FieldSET LED vatyairi (ona tafura FieldSET Replacement LED Driver List)
8/9	CURRENT SET	a. Mushandisi anogona kuseta anobuda mazinga achishandisa kumusoro / pasi ekuwedzera mabhatani mukati meiyo 150-3000mA.

Hardware Kubatana

CHERECHEDZA: Zvinokurudzirwa kuti ubvise mutyairi wauri kutsiva kubva pachigadziriso usati watevera matanho ari pazasi. Mutyairi anofanira kubviswa kubva kuMains Power asati abvisa kana kugadzira zvinongedzo.

Danho 1
Batanidza programming tambo kuFieldSET Driver Programming Tool

Danho 2
Batanidza programming tambo kumutyairi'

Danho 3
Batanidza programming tambo kumutyairi PRG uye LED Red POS (+) uye Black NEG (-) zviteshi pamutyairi.

Linear	Compact	Kunze
Ongorora: Pini gungano rinofanirwa kudzvanywa zvishoma kune mutsara modhi kuti uenderane nekukwira kweiyo terminal.
Linear/Compact: PRG = Brown LED- = Bhuruu		Kunze: PRG = Orange LED- = Bhuruu

Driver Setup uye Operation

6.1 Batidza/VISA mudziyo

1. Sunda uye Bata bhatani reVERENGA / SIMBA kwemasekonzi matatu kuti ubatidze iyo FieldSET LED Driver Programming Tool.
   a. Chiratidziro chinopenya uye inonzwika beep inoratidza yakabatidzwa.
   b. Kuratidzwa kucharatidza kaviri zero (00) pakutanga (kunze kwebhokisi) kutanga-up. Mushure mekutanga kushandiswa, chiratidziro uye zviratidzo zve LED zvicharatidza zvakambopinda marongero kana programmer ikavhurwa.
   c. Kana mudziyo usingabatiki, tarisa kuti mabhatiri aiswa zvakanaka here uye akachajwa. Chishandiso chinoshandisa (1) 9V bhatiri.
2. Mudziyo wakagadzirira kushandiswa.
3. Kuti udzime mudziyo, sunda uye ubate VERENGA/SIMBA kwemasekonzi mashanu.

6.2 VERENGA parameters kubva kune yepakutanga OPTOTRONIC mutyairi (chinyorwa: nhanho 6.2 inoshanda chete kune OPTOTRONIC vatyairi)

1. Ita shuwa kuti mutyairi aripo haana simba.
2. Dzvanya bhatani reVER kuti upinde Read Mode 1.
3. Batanidza tambo yekuronga kune yekutanga mutyairi PRG uye LED (-) zviteshi.
   a. Beep inonzwika uye skrini inopenya inoratidza yakabudirira VERENGA.
4. Zvigadziriso zvemutyairi zvichange zvakatakurwa kuchirongwa chekugadzirisa uye kuratidzwa paLCD uye zviratidzo zve LED.
5. Dzvanya VERENGA bhatani zvakare kuti ubude VERENGA modhi. Zvirongwa zvichachengetwa.
   CHERECHEDZA: Mode 1 inobvumira mushandisi kugadzirisa mutyairi nemasetirwo aanofarira.
   Iyo FieldSET Programming Tool inogadziriswa kuMode 1.
   Kushandisa FieldSET Programming Tool muMode 2 inobvumira mushandisi kukopa nekuisa zvigadziriso zvemutyairi zvepakutanga asi hazvibvumiri mushandisi kugadzirisa zvirongwa zvemutyairi. Kune Mode 2 programming mirayiridzo, tarisa iyo Addendum yeiyi FieldSET User Guide.

6.3 Gadzirisa ma parameter

1. Shandisa CURRENT SET kugadzirisa zvinobuda.
2. Shandisa iyo MIN DIMMING yekusarudza kugadzirisa iyo diki dimming level.
3. Kana mutyairi achida kudzikiswa kuti adzime (standby mode) ne 0-10V control system, Dim-to-Off inogona kugoneswa nekusundidzira uye kubata iyo MIN DIMMING.
   YAMBIRO: Kuwedzera dhiraivha yazvino (mA) nhanho yemutyairi anotsiva kunotyora zvinodikanwa zvekuchinjana kune vatyairi zvakapihwa seKirasi P neUnderwriters Laboratories.

6.4 PROGRAM iyo FieldSET inotsiva mutyairi

1. Iva nechokwadi chokuti mutyairi haana simba.
2. Kana magadzirirwo akakodzera aiswa kuProgramming Tool, dzvanya bhatani rePROGRAM kuti uise purogiramu mode.
   a. Chishandiso chicharira uye kumirira kubatana kumutyairi
3. Batanidza tambo yekuronga kune FieldSET mutyairi PRG uye LED (-) zviteshi
   a. Beep inonzwika uye skrini inopenya inoratidza yakabudirira PROGRAM
4. Dzvanya bhatani rePROGRAM zvakare kuti usiye purogiramu yekugadzira.
5. Iyo FieldSET Driver ikozvino yagadzirira kuisa. Tarisa kune mutyairi wiring mirayiridzo.

Driver Programming

Zvinhu zvitatu zviripo kana uchitsiva mutyairi wepakutanga-akaiswa. Ndokumbira utarise kune inotevera mirairo yechirongwa chechirongwa chinoshanda pakutsiva kwako:

Scenario 1
Yekutanga mutyairi ndeye programmable OPTOTRONIC LED mutyairi
Danho 1
Batanidza Programming Cable kuFieldSET Programmer wodzvanya uye bata bhatani reMOWER kuti ubatidze.
Screen inozorodha marongero kubva kusati yashandiswa.
Danho 2
Kuti uverenge zvigadziriso kubva kuMutyairi Wekutanga, dzvanya bhatani VERENGA uye wozobatanidza Chirongwa Chekuita kune Yekutanga Driver (ita shuwa kuti mutyairi haana simba). Kana iyo Kuverenga ikabudirira, skrini inopenya, inonzwika inonzwika, uye marongero akarongwa emutyairi acharatidzwa pachiratidziri uye zviratidzo zve LED.
Danho 3
Ita chero zvigadziriso zvinodikanwa kune zvirongwa zvechirongwa (kana zvichidikanwa). Shandisa CURRENT SET mabhatani kugadzirisa yazvino nhanho uye shandisa iyo MIN DIMMING bhatani kugadzirisa kushoma dimming level. Kana iyo FieldSET Replacement Driver ichifanira kuenderana nekuita chaiko kweChekutanga Driver, usaite chero shanduko kune zvigadziriso.
YAmbiro: kuwedzera dhiraivha yazvino (mA) nhanho yeanotsiva mutyairi kunotyora UL Kirasi P yekuchinjika zvinodiwa.
Danho 4
Kuti uise zvigadziriso kuFieldSET Replacement Driver, tanga wadzvanya bhatani rePROGRAM wozobatanidza iyo Programming Cable kune FieldSET Replacement Driver. Kana zvigadziriso zvakatakurwa zvakabudirira, skrini inopenya YAITA uye ruzha runonzwika rwunonzwika. Dzvanya bhatani rePROGRAM zvakare kuti usiye chirongwa chekugadzirisa.
Scenario 2
Mutyairi wepakutanga imhando isiri yeOPTOTRONIC uye ine label inosanganisira yazvino kubuda (mA kana A) uye/kana dim level marongero.
Danho 1
Batanidza Programming Cable kuFieldSET Driver Programmer Tool wobva wadzvanya uye bata bhatani reMOWER kuti ubatidze. Screen inozorodha marongero kubva kusati yashandiswa.
Danho 2
Shandisa mabhatani eCURRENT SET kugadzirisa yazvino nhanho pachiratidziri uye shandisa MIN DIMMING bhatani kugadzirisa diki diki nhanho kuti ienderane nemaseting akanyorwa pane Yekutanga Driver's label.
Danho 3
Kuti uise zvigadziriso kuFieldSET Replacement Driver, tanga wadzvanya bhatani rePROGRAM wozobatanidza iyo Programming Cable kune FieldSET Replacement Driver. Kana zvigadziriso zvakatakurwa zvakabudirira, skrini inopenya YAITA uye ruzha runonzwika rwunonzwika. Dzvanya bhatani rePROGRAM zvakare kuti usiye chirongwa chekugadzirisa.
Scenario 3
Mutyairi wepakutanga imhando isiri yeOPTOTRONIC uye haina label inosanganisira yazvino kubuda (mA kana A) uye/kana dim level marongero.

Bata mugadziri wekugadzirisa uye bvunza marongero emutyairi anoshandiswa mune mwenje mwenje. Kazhinji, ivo vachakwanisa kutarisa ruzivo urwu nekugadzirisa chikamu nhamba / tsananguro. Kana mugadziri wekugadzirisa asipo, kana asingakwanisi kupa zvigadziriso zvemutyairi, sarudzo chete ndeyekuyera kubuda kwemutyairi ikozvino uye dim level mukushanda system. Zviyero zvinofanirwa kuitwa chete nevashandi vanokwanisa vane ruzivo rwemagetsi kana kudzidziswa kwekutanga. Shanyira yakafanana inoshanda mwenje mwenje (chaiyo chaiyo chikamu nhamba) kuita kuyerwa (multimeter inodiwa.)

Kuyerwa Matanho – Kubuda Zvazvino (mA):

• De-energize the fixture uye uwane Mutyairi.
• Bvisa chero waya dzakabatanidzwa kuDriver's DIM(+) PURPLE uye DIM(-) GRAY kana PINK zviteshi/waya. DIM (+) uye DIM (-) inofanira kunge yakavhurika-dunhu saka Mutyairi anoburitsa 100% kana apihwa simba.
• Seta iyo Multimeter kuyera DC ikozvino (mA).
• Batanidza iyo Multimeter kuyera iyo Mutyairi inobuda ikozvino kune iyo LED.
• Kana uchishandisa Current Clamp Probe, clamp yakatenderedza iyo LED (+) RED yakabuda waya yeDriver.
• Kana uchishandisa Test Leads, unozofanirwa kutyora chinongedzo pakati peDriver's LED(+) RED kubuda neiyo LED (+) yekuisa.
  Batanidza Test Leads munhevedzano kuvhara dunhu.
• Nyatsosimbisa chigadziriso uye kuyera inobuda ikozvino (mA). Cherechedza kukosha uku kuti ushandise gare gare. De-energize the fixture.
  Siya iyo Multimeter yakabatana kune yakaderera dim level kuyerwa.

Matanho ekuyera - Minimum Dim Level:

• Kuyera iyo yakaderera dim nhanho, chengeta iyo Multimeter yakaiswa nenzira imwe chete sepakutanga, uye kupfupisa iyo Driver's DIM (+) PURPLE uye DIM (-) GRAY kana PINK zviteshi/waya. Kupfupisa DIM (+) uye DIM (-) kunomanikidza Mutyairi kudzikisira kuburitsa kwayo kusvika padanho rediki. Ndokumbira utarise, diki dimming level inogona kunge iri 0% (off).
• Izvi zvinogona kuwanikwa nekuisa wire jumper, solid copper 16-22 AWG, pakati peDIM(+) PURPLE neDIM(-) GRAY kana PINK.
• Kana mutyairi aine magwara anobhururuka, ingobatanidza DIM(+) uye DIM(-) pamwechete uchishandisa WAGO style Quick Connect kana zvakafanana.
• Nyatsosimbisa chigadziriso uye kuyera inobuda ikozvino (mA) panguva yakadzikira mamiriro neMultimeter.
• Verenga iyo yakaderera dimming level: Govanisa inobuda ikozvino panguva yakazara dimmed mamiriro nekubuda ikozvino panguva yakazara 100% yenyika. Inogona kunge iri 1%, 5%, kana 10%. Cherechedza kukosha uku kuti ushandise gare gare.
• De-energize the fixture. Bvisa Multimeter uye zvakare-waya chigadziriso.

Danho 1
Batanidza Programming Cable kuFieldSET Programmer wodzvanya uye bata bhatani reMOWER kuti ubatidze. Screen inozorodha marongero kubva kusati yashandiswa.
Danho 2
Shandisa CURRENT SET mabhatani kugadzirisa yazvino nhanho pachiratidziro uye shandisa MIN DIMMING bhatani kugadzirisa diki diki nhanho kuti ienderane nemasetirwo akayerwa kubva kune yakafanana kushanda gadziriso.
Danho 3
Kuti uise zvigadziriso kuFieldSET Replacement Driver, tanga wadzvanya bhatani rePROGRAM wozobatanidza iyo Programming Cable kune FieldSET Replacement Driver. Kana zvigadziriso zvakatakurwa zvakabudirira, skrini inopenya YAITA uye ruzha runonzwika rwunonzwika. Dzvanya bhatani rePROGRAM zvakare kuti usiye chirongwa chekugadzirisa.

Error Codes

Makodhi akasiyana-siyana ekukanganisa acharatidzwa paLCD Screen mune chero mamiriro ataurwa patafura pazasi:

Error Message	Tsananguro yekukanganisa
Er:01 FAIF	Kukanganisa kwekutaura panguva yekuverenga. Tarisa kubatana nemutyairi.
Er:02 FAIF	Kukanganisa kwekukurukurirana panguva yekugadzira. Tarisa kubatana nemutyairi.
Er:03 NoRd	Mutyairi haazivikanwe nechirongwa chekushandisa.
Er:04 I HI	Ikozvino setpoint yakakwira zvakanyanya kumutyairi akabatana.
Er:05 Ini Tarirai	Ikozvino setpoint yakadzikira zvakanyanya kumutyairi akabatana.
Er:06 nondo	Minimum dim level haitsigirwe nemutyairi akabatana.
Er:07 Notec	Wrong thermal protection inoderedza kukosha kwedata.
Er:08 CLO	Data yenguva dzose yekubuda kwe lumen haisiyo.
Er:09 zvimwe	Haisiyo 0-10V dimming threshold data.
Er:10 C Id	Kuedza kumutyairi wepurogiramu haienderane nedata rakachengetwa.
Er:11 Nap	Tool haitsigire programming mutyairi akabatana.
bat	Bhatiri rakaderera; tsiva bhatiri.
Load	Waya kumutyairi ipfupi kana mapini epurogiramu anoiswa kumashure.

Kutsiviwa kwebhatiri

a. Programmer Turusi inofambiswa ne1 x bhatiri (9V)
b. Vhura mupanda webhatiri kuti uwane bhatiri

Zvinotsanangurwa

Simba

Chiyamuro Voltage (DC)	9V (Battery Inoshanda)
USB Interface	USB 1.1 kana 2.0
USB Port Rudzi	Micro-B
USB Cable Kureba	3 tsoka
Chirongwa Cable	2-Conductor (22AWG) - Indoor / Kunze
Programming Cable Length	3 tsoka

10.1 Mamiriro Ezvakatipoteredza

Ambient Operating Temperature	0°C kusvika +50°C
Max. Storage Temp. Regulatory Standards	0°C kusvika +50°C
Environmental Standards	RoHS, SVIKA
IP Rating	IP20
EMI Kutevedzera	FCC Chikamu 15 Kirasi A

10.2 Mechanical Zvinotsanangurwa
Housing

Urefu	6.5″ (165mm)
Upamhi	3.1″ (80mm)
Urefu	1.1″ (28mm)

Addendum

Mode 2 - OPTOTRONIC Driver Programming Instructions

1. Ita shuwa kuti mutyairi aripo haana simba.
2. Batanidza Programmer kune mutyairi we LED
3. Batidza Programmer uye uichengetedze yakadzikama (zvese VERENGA & PROGRAM mwenje yakadzimwa - hapana ruzha rwekurira)
4. Dzvanya VERENGA & Iyo Yazvino(-) panguva imwe chete bhatani kuti uise Read Mode 2 (kwemasekonzi matatu.)
   Iyo skrini icharatidza "OP_2" uye kupenya neyakakopwa yazvino uye dim profile.
   a. Chishandiso chicharira uye kumirira kubatana kumutyairi.
5. Batanidza tambo yekuronga kune yekutanga mutyairi PRG uye LED (-) zviteshi.
   a. Beep inonzwika uye skrini inopenya inoratidza yakabudirira VERENGA.
6. Zvigadziriso zvemutyairi zvichaiswa kuchirongwa chekugadzira. Iyo inoratidzira inongoratidza yazvino kubuda, dimming level uye D2O chimiro (chero chimwe chinhu chakadai seCLO kana pane chakakopwa chisingaonekwe.)
7. Dzvanya VERENGA bhatani zvakare kuti ubude VERENGA modhi. Zvirongwa zvichachengetwa. MuKuverenga Modhi 2, paramita haigone kugadziriswa.

CHERECHEDZA: Zvirongwa zvinochengetwa kunyangwe programmer yakadzimwa (izvi zvinoonekwa kana "OT_2" ichipenya paLCD.
KUBVISA RUZIVO RAKAPONESWA: Isa iyo unit munzvimbo yakatsiga (VERENGA & PROGRAM marambi akadzimwa) uye verenga mutyairi. Iwe hausi kuona "OT_2" kupenya paLCD.

https://qrs.ly/h6ed5w8
Tsvaga zvimwe zvekushandisa pa
www.acuitybrands.com/FieldSET
Kuti uwane Tsigiro yeTekinoroji, bata 1-800-241-4754
or eldoLEDtechsupport@acuitybrands.com
www.neworlds.comZvinyorwa zvinogona kuchinja pasina chiziviso. Kuita chaiko kunogona
zvinosiyana semhedzisiro yemagumo-mushandisi nharaunda uye mashandisiro. One Lithonia Way, Conyers, GA 30012 | Runhare: 877.353.6533 | www.neworlds.com
© 2023 Acuity Brands Lighting, Inc. Kodzero dzese dzakachengetwa. | EL_1554355.03_0723

Zvinyorwa / Zvishandiso

FieldSET eldoLED FieldSET LED Driver Programming Tool [pdf] Bhuku reMirayiridzo eldoLED FieldSET LED Driver Programming Tool, eldoLED, FieldSET LED Driver Programming Tool, LED Driver Programming Tool, Driver Programming Tool, Programming Tool

References

• User Manual