Tlholisano ea Architectural RDM Controller Updater
MOLAOLI E FETILENG
MOSEBETSI TS'ELISO
Netefatsa hore o fumana litaba tsa morao-rao le lintlha tse ncha mabapi le lihlahisoa tsa CONTEST® ho: www.architectural-lighting.eu
Lintlha tsa polokeho
Lintlha tsa bohlokoa tsa polokeho
Ts'ebetso efe kapa efe ea tokiso e tlameha ho etsoa ke ts'ebeletso e lumelletsoeng ea tekheniki ea CONTEST. Mesebetsi ea mantlha ea ho hloekisa e tlameha ho latela litaelo tsa rona tsa polokeho ka botlalo.
Matšoao a sebelisitsoeng
 |
Letšoao lena le bontša tšireletso ea bohlokoa. |
 |
Letšoao la TLHOKOMELISO le supa kotsi ho bots'epehi ba 'mele ba mosebelisi. Sehlahisoa se ka boela sa senyeha. |
 |
Letšoao la TLHOKOMELISO le bontša kotsi ea ho senyeha ha sehlahisoa. |
Litaelo le likhothaletso
- Ka kopo bala ka hloko :
Re khothaletsa ka matla ho bala ka hloko le ho utloisisa litaelo tsa polokeho pele o leka ho sebelisa yuniti ena. - Ka kopo, boloka bukana ena:
Re khothaletsa ka matla ho boloka bukana ena le yuniti bakeng sa tšebeliso ea nako e tlang. - Sebetsa ka hloko sehlahisoa sena :
Re khothaletsa ka matla ho ela hloko litaelo tsohle tsa polokeho. - Latela litaelo:
Ka kopo latela ka hloko taelo e 'ngoe le e 'ngoe ea polokeho ho qoba kotsi efe kapa efe 'meleng kapa tšenyo ea thepa. - Boemo ba mocheso :
Se ke oa pepesehela khanya ea letsatsi kapa mocheso nako e telele. - Phello ea motlakase:
Sehlahisoa sena se ka sebetsoa feela ho latela molumo o khethehileng haholotage. Lintlha tsena li hlalositsoe leiboleng e ka morao ea sehlahisoa. - Litlhokomelo tsa ho hloekisa :
Hlakola sehlahisoa pele u leka ho hloekisa. Sehlahisoa sena se lokela ho hloekisoa feela ka lisebelisoa tse khothalletsoang ke moetsi. Sebelisa papatsoamp lesela ho hloekisa bokahodimo. U se ke ua hlatsoa sehlahisoa sena. - Sehlahisoa sena se lokela ho sebetsoa ha:
Ka kopo ikopanye le basebetsi ba nang le litsebo haeba:
- Lintho li oele kapa metsi a tšolotsoe ka har'a sesebelisoa.
- Sehlahisoa ha se bonahale se sebetsa ka mokhoa o tloaelehileng.
– Sehlahisoa se senyehile. - Lipalangoang :
Sebelisa sephutheloana sa mantlha ho tsamaisa yuniti.
Ho tsosolosa sesebelisoa sa hau
- Kaha HITMUSIC e hlile e ameha molemong oa tikoloho, re rekisa feela lihlahisoa tse hloekileng, tse lumellanang le ROHS.
- Ha sehlahisoa sena se fihla pheletsong ea bophelo, se ise sebakeng sa pokello e khethiloeng ke ba boholong sebakeng seo. Pokello e arohaneng ea sehlahisoa sa hau le ho sebelisoa bocha ha sehlahisoa sa hau ka nako ea ho lahla ho tla thusa ho baballa mehloli ea tlhaho le ho netefatsa hore e sebelisoa hape ka mokhoa o sireletsang bophelo bo botle ba batho le tikoloho.
Sebopeho
VRDM-CONTROL ke lebokose la taolo la RDM le hole (VRDM-Control) le e nolofalletsang ho etsa litlhophiso tsohle tse fapaneng ho liprojeke:
- Eketsa sesebelisoa ho DMX
- Fetola mokhoa oa DMX
- Ho fihlella mokhoa oa Master Slave, ho felisa tlhoko ea molaoli oa DMX
- Ho fihlella ka kotloloho ho liteishene tse fapaneng tsa DMX ho fetola 'mala kapa ho qala color preset / CCT kapa macro e seng e hahiloe ka har'a sebopeho.
- Sheba mofuta oa fixture
- Etsa lintlafatso ho sesebelisoa
- Fetola mothinya oa dimmer
- Tekanyo e nepahetseng e tšoeu
- View lihora tsa sehlahisoa
Litaba tsa sephutheloana:
Pakete e lokela ho ba le tse latelang:
- Lebokose
- Tataiso ea mosebelisi
- 1 thapo ya USB-C
- 1 karete ea micro SD
Tlhaloso
Pontšo ea LCD
E u lumella ho hlahisa menu ea ka hare le view lintlha tse mabapi le projeke e 'ngoe le e 'ngoe e hokahaneng.- Senotlolo sa MODE
E sebelisoa ho qala molaoli le ho e tima (tobetsa metsotsoana e 3).
E ka boela ea sebelisoa ho khutlela morao ka har'a menyetla e fapaneng. - Linotlolo tsa ho tsamaea
E u lumella ho tsamaea ka har'a limmapa tse fapaneng, beha boleng ba karolo ka 'ngoe 'me u netefatse likhetho tsa hau ka konopo ea ENTER. - Tlhahiso / tlhahiso ea DMX ho 3-pin XLR
- USB input (USB C)
Ha thapo ea USB-C e hokahantsoe le komporong 'me VRDM-Control e buletsoe, lebokose le tsejoa e le thupa ea USB, 'me u ntlafatse. files ka fetisetsoa. Khokahano ea USB e boetse e nchafatsa betri ea VRDMControl. - Boema-kepe ba Micro SD
Kenya karete ea micro SD ho 'mali.
Karete ea Micro SD e na le ntlafatso ea firmware ea projector files. - Tlhahiso / tlhahiso ea DMX ho 5-pin XLR
- strap fastening notch
Bakeng sa ho hokela leqhoele la letsoho. Leqhoele lena ha le fanoe.
4.1 - Scene 1 : Lenane la mantlha
Tobetsa MODE ho kena skrineng sena.
Lenaneo lena le fana ka phihlello ea mesebetsi e fapaneng ea VRDM-CONTROL.
Mosebetsi o mong le o mong o hlalosoa ka botlalo ka tlase.
Ho khutlela skrineng sa lapeng, tobetsa MODE.
4.2 - Skrine sa 2: menu ea RDM
Lenaneo lena le fana ka phihlello ea litlhophiso tse fapaneng bakeng sa sesebelisoa se seng le se seng se hokahaneng le mohala oa DMX.
VRDM-CONTROL e lekola lenane la lisebelisoa tse hokahaneng.
Qetellong ea cheke u tla bona lethathamo la lisebelisoa.
- Sebelisa likonopo tsa UP le DOWN ho khetha sesebelisoa. Sesebelisoa se khethiloeng sea benya ho se khetholla ka har'a ketane ea projeke.
- Tobetsa ENTER ho fihlella litlhophiso tse fapaneng bakeng sa sebopeho se khethiloeng.
Hlokomela: Mofuta o mong le o mong oa projector o na le menu ea oona e khethehileng. Sheba litokomane tsa projeke ea hau ho fumana hore na ke mesebetsi efe e tobileng ho eona.
- Sebelisa linotlolo tsa UP le DOWN ho khetha tšebetso.
- Sebelisa likonopo tsa LETELE le LE LETANE ho fihlella likaroloana.
- Tobetsa ENTER ho kenya phetoho.
- Sebelisa linotlolo tsa UP le DOWN ho fetola boleng.
- Tobetsa ENTER ho netefatsa.
- Tobetsa MODE ho khutlela ho khutlela morao.
Hlokomela: ha u sebelisa splitter ea DMX e le karolo ea ho kenya, ho bohlokoa hore hardware e lumellane le RDM, e le hore lisebelisoa tsa Versatile li ka tsejoa ke VRDM-Control.
VRDM-Split H11546 e tla finyella tlhoko ena.
4.3 – Screen 3 : DMX Check Values menu
Mokhoa ona o bonts'a boleng ba likanale tsa DMX tse kenang ha sesebelisoa se ntšang lets'oao la DMX se hoketsoe joalo ka ho kenya letsoho.
Hlokomela: E le ho etsa opereishene ena, plug ea XLR ea monna/e motona e tlameha ho sebelisoa ha ho kenngoa VRDM-CONTROL.
- Pontšo e bonts'a mela e 103 ea likanale tse 5.
- Liteishene tse nang le boleng ba 000 li hlahisoa ka bosoeu, tse ling ka bofubelu.
- Sebelisa linotlolo tsa UP le DOWN ho tsamaisetsa meleng le view likanale tse fapaneng.
4.4 – Skrine sa 4: Lenane la ntlafatso la FW
Lenane lena le sebelisoa ho nchafatsa firmware ea sesebelisoa.
- Hokela VRDM-Control ho PC u sebelisa thapo ea USB-C e fanoeng.
- Fetolela VRDM-Control, leqephe le tla buleha ho PC ha lebokose le tsejoa e le thupa ea USB.
- Hula ntlafatso files ho bukana ea karete ea SD e bulehileng ho PC.
- Eya ho FW Updater mode.
- Hokela VRDM-CONTROL ho sesebelisoa u sebelisa thapo ea DMX.
- Khetha ea file ho romelwa ho porojeketara.
- Khetha lebelo la phetiso :
- Fast : Lebelo le tloaelehileng le lokelang ho sebelisoa maemong a mangata.
- Tlwaelehileng : Lebelo le sebediswang ha apdeite e hloleha kapa ha o ntse o ntjhafatsa disebediswa tse mmalwa. Leha ho le joalo, re u eletsa ka matla hore u ntlafatse projector e le 'ngoe feela ka nako.
- Tobetsa ENTER ho netefatsa. Pontšo e bonts'a START/RETURN.
- Khetha RETURN: Haeba ho na le phoso, ha ho letho le etsahalang.
- Khetha QALA ho qala ntlafatso.
- Tobetsa ENTER ho netefatsa: ponts'o e bonts'a «Fumana Sesebelisoa» ho bonts'a hore puisano le projeke e ntse e lokisoa. Hang ha sesebelisoa se se se lokile, ntlafatso e qala ka bo eona.
- Ha ntlafatso e felile, ponts'o e bonts'a CONTINUOUS/FINISH.
- Khetha TSOELA PELE haeba u hloka ho hlophisa sebopeho le se seng file. Khetha e latelang file 'me u qale ho etsa mananeo, ebe u pheta ts'ebetso ena bakeng sa bohle files ho hlophisoa.
- Kgetha FINISH haeba o qetile ho etsa mananeo. Puisano le projector e tla sitisoa 'me e tla tsosolosoa.
- Eya ho menu ea projector ho hlahloba hore na phetolelo e hlahang ke ea morao-rao.
Lintlha :
- Netefatsa hore karete ea hau ea Micro-SD e fomete ka FAT.
- Haeba ho hlokahala lintlafatso, li jarolle ho tsoa ho www.architectural-lighting.eu
- Hoa khoneha ho ntlafatsa firmware ea lebokose la VRDM-CONTROL ka ho latela mokhoa o tšoanang. Ts'ebetso ena e hloka ts'ebeliso ea mabokose a mabeli le adaptara ea banna ea XLR / XLR.
4.5 - Skrine sa 5: Menu ea li-setting
Lenane lena le sebelisetsoa ho seta liparamente tsa VRDM-CONTROL.
4.5.1 : Ho bala :
E khetha yuniti eo ho eona ho hlahisoang litekanyetso tsa DMX: Percentage / Decimal / Hexadecimal.
4.5.2 : Tseba ka ho Fetisisa :
E nolofalletsa kapa e tima boitsebahatso ba projector ha e le ho menu ea RDM (4.2): Haeba khetho ena e behiloe HO TIMA, li-projeke tse khethiloeng li ke ke tsa hlola li khanya.
4.5.3 : Sebali sa Nako ea Sesebediswa :
E nolofalletsa kapa e tima ho koala ha VRDM-CONTROL ka boiketsetso.
4.5.4: Bokhabane ba LCD:
E fetola khanya ea LCD.
4.5.4 : LCD Off Timer :
E u fa monyetla oa ho beha nako pele skrini sa LCD se tima ka bohona: ho tloha HO TIMA (ha ho tima) ho isa metsotsong e 30.
4.5.5 : Tšebeletso :
E u lumella ho khutlela ho litlhophiso tsa feme le ho kenya phasewete.
4.5.5.1 : Khutlisa fektheri :
E khutlela ho litlhophiso tsa feme: YES/CHE.
Netefatsa ka ENTER.
4.5.5.2 : Khutlisa fektheri :
Kenya password: ho tloha ho 0 ho isa ho 255.
Netefatsa ka ENTER.
4.6 - Screen 6 : Lenaneo la Boitsebiso ba Sesebelisoa
E bonts'a mofuta oa firmware oa VRDM-CONTROL le boemo ba betri.
Lintlha tsa tekheniki
- Phepelo ea matla: USB-C, 5 V, 500 mA
- Kenyelletso/ho tsoa DMX: XLR 3 le 5 pin
- Karete ea Micro SD: <2 Go, FAT e hlophisitsoeng
- Boima ba 'mele: 470 g
- Litekanyo : 154 x 76 x 49 limilimithara
Hobane CONTEST® e hlokolosi ka ho fetisisa lihlahisoa tsa eona ho etsa bonnete ba hore o fumana feela boleng ba boleng bo holimo, lihlahisoa tsa rona li ka fetoloa ntle le tsebiso pele. Ke ka lebaka leo litlhaloso tsa tekheniki le sebopeho sa lihlahisoa li ka fapanang le lipapiso.
Netefatsa hore o fumana litaba tsa morao-rao le lintlha tse ncha mabapi le lihlahisoa tsa CONTEST® ho www.architectural-lighting.eu CONTEST® ke lets'oao la khoebo la HITMUSIC SAS - 595
www.hitmusic.eu
Litokomane / Lisebelisoa
 |
Tlholisano ea H11883 Contectural Architectural RDM Controller [pdf] Bukana ea Mosebelisi H11383-1, H11883, H11883 Contest Architectural RDM Updater Controller, Contectural Architectural RDM Updater Controller, Architectural RDM Updater Controller, RDM Updater Controller, Updater Controller, Controller |