Beijer Electronics GT-3928 Analog Input Module
Litlhaloso
- Mohlala: GT-3928 Analog Input Module
- Litlhahiso tsa Analog: 8 phapang
- Moqtage Ranges: 0 – 5 V / -5 – 5 V / 0 – 10 V / -10 – 10 V
- Qeto: 12 hanyane
- Mofuta oa Terminal: Cage Clamp, 18 pt removable terminal
Litaelo tsa Tšebeliso ea Sehlahisoa
Ho kenya
- Netefatsa hore matla a sisteme a tingoe pele o kenya.
- Kenya GT-3928 Analog Input Module ka mokhoa o sireletsehileng sebakeng se loketseng.
- Hokela matšoao a ho kenya analoge ho li-terminals tse latelang ho latela molumo o boletsoengtage ranges.
- Lekola likhokahano tsohle habeli pele o kenya motlakase.
Tlhophiso
- Sheba litokomane tsa G-Series System bakeng sa ho hlophisa module ka har'a sistimi.
- Beha molumo o loketsengtage ipapisitse le litlhoko tsa hau tsa kopo.
- Lekanya mojule ha ho hlokahala ho netefatsa ho bala ho nepahetseng.
Tšebeliso
- Matla holim'a sisteme 'me u shebe matšoao a kenyelletso ea analog ho sehokelo se hokahaneng.
- Kamehla hlahloba boitšoaro leha e le bofe bo sa tloaelehang kapa ho feto-fetoha ha 'malo.
- Sheba letšoao la LED bakeng sa tlhahisoleseding ea boemo.
Mabapi le Bukana ena
Bukana ena e na le lintlha tse mabapi le software le likarolo tsa hardware tsa Beijer Electronics GT-3928 Analog Input Module. E fana ka litlhaloso tse tebileng, le tataiso mabapi le ho kenya, ho seta, le tšebeliso ea sehlahisoa.
Matshwao a Sebedisitsweng Bukaneng ena
Sengoliloeng sena se kenyelletsa Temoso, Tlhokomeliso, Tlhokomeliso le matšoao a Bohlokoa moo ho loketseng, ho supa lintlha tse amanang le polokeho, kapa lintlha tse ling tsa bohlokoa. Matšoao a tšoanang a lokela ho hlalosoa ka tsela e latelang:
TLHOKOMELO
Letšoao la Tlhokomeliso le bontša boemo bo ka bang kotsi boo, ha bo sa qojoe, bo ka bakang lefu kapa kotsi e mpe le tšenyo e kholo sehlahisoa.
TLHOKOMELO
Letšoao la Tlhokomeliso le bontša boemo bo ka bang kotsi boo, ha bo sa qojoe, bo ka bakang kotsi e nyane kapa e itekanetseng, le tšenyo e itekanetseng sehlahisoa.
HLOKOMELA
Letšoao la Note le hlokomelisa 'mali ka lintlha le maemo a amehang.
BOHLOKOA
Letšoao la Bohlokoa le totobatsa lintlha tsa bohlokoa.
Polokeho
- Pele o sebelisa sehlahisoa sena, ka kopo bala bukana ena le libuka tse ling tse amehang ka hloko. Ela hloko ka botlalo litaelo tsa polokeho!
- Na ha ho na ketsahalo na Beijer Electronics e tla ikarabella kapa ho ikarabella bakeng sa tšenyo e bakiloeng ke tšebeliso ea sehlahisoa see?
- Litšoantšo, mohlalaamples, le litšoantšo bukeng ena li kenyelelitsoe molemong oa ho etsa litšoantšo. Ka lebaka la mefuta e mengata e fapaneng le litlhoko tse amanang le ts'ebetso efe kapa efe e itseng, Beijer Electronics e ke ke ea nka boikarabello kapa boikarabello bakeng sa ts'ebeliso ea 'nete e ipapisitseng le maemo a khale.amples le litšoantšo.
Setifikeiti sa Sehlahisoa
Sehlahisoa se na le litifikeiti tse latelang tsa sehlahisoa.
Litlhoko tse akaretsang tsa polokeho
TLHOKOMELO
- U se ke ua kopanya lihlahisoa le lithapo ka matla a hokahaneng le sistimi. Ho etsa socausese "arc flash", e ka fellang ka liketsahalo tse kotsi tse sa lebelloang (ho chesa, mollo, lintho tse fofang, khatello ea ho phatloha, ho phatloha ha molumo, mocheso).
- Se ke oa ama li-terminal blocks kapa li-module tsa IO ha sistimi e sebetsa. Ho etsa joalo ho ka baka ts'okelo ea motlakase, potoloho e khuts'oane, kapa ho se sebetse hantle ha sesebelisoa.
- Le ka mohla u se ke ua lumella lintho tsa tšepe tse ka ntle ho ama sehlahisoa ha tsamaiso e ntse e sebetsa. Ho etsa joalo ho ka baka ts'okelo ea motlakase, circ,it, kapa ho se sebetse hantle ha sesebelisoa.
- U se ke ua beha sehlahisoa haufi le thepa e tukang. Ho etsa joalo ho ka baka mollo.
- Mosebetsi oohle oa lithapo o lokela ho etsoa ke moenjiniere oa motlakase.
- Ha u sebetsana le li-module, etsa bonnete ba hore batho bohle, sebaka sa mosebetsi le ho paka li thehiloe hantle. Qoba ho ama likarolo tsa conductive, li-module li na le likarolo tsa elektronike tse ka 'nang tsa senngoa ke ho tsoa ha electrostatic.
TLHOKOMELO
- Le ka mohla u se ke ua sebelisa sehlahisoa libakeng tse nang le mocheso oa mocheso o fetang 60 ℃. Qoba ho beha sehlahisoa letsatsing le tobileng.
- Le ka mohla u se ke ua sebelisa sehlahisoa libakeng tse nang le mongobo o fetang 90%.
- Kamehla sebelisa sehlahisoa libakeng tse nang le tekanyo ea 1 kapa 2 ea tšilafalo.
- Sebelisa likhoele tse tloaelehileng bakeng sa likhoele.
Mabapi le Sistimi ea letoto la G
Fetileview
- Network Adapter Module - Mojule oa adaptara ea marang-rang o theha sehokelo lipakeng tsa bese ea tšimo le lisebelisoa tsa masimong tse nang le li-module tsa katoloso. Khokahano ho litsamaiso tse fapaneng tsa libese tsa masimong e ka theoa ke e 'ngoe le e' ngoe ea li-adapter tsa marang-rang tse tsamaellanang, mohlala, bakeng sa MODBUS TCP, Ethernet IP, EtherCAT, PROFINET, CC-Link IE Field, PROFIBUS, CANopen, DeviceNet, CC-Link, MODBUS/Seria,l joalo-joalo.
- Katoloso Mojule - Mefuta ea li-module tsa katoloso: Digital IO, Analog IO, le li-module tse khethehileng.
- Melaetsa - Sistimi e sebelisa mefuta e 'meli ea melaetsa: Melaetsa ea litšebeletso le melaetsa ea IO.
IO Process Data Mapping
- Mojule oa katoloso o na le mefuta e meraro ea data: data ea IO, paramethara ea tlhophiso, le ngoliso ea memori. Phapanyetsano ea data pakeng tsa adaptara ea marang-rang le li-module tsa ho atolosa li etsoa ka data ea setšoantšo sa IO ka protocol ea ka hare.
- Phallo ea data lipakeng tsa adaptara ea marang-rang (li-slots tse 63) le li-module tsa katoloso
- Lintlha tsa setšoantšo le se hlahisoang li itšetlehile ka sebaka sa slot le mofuta oa data oa slot ea ho atolosa. Ho hlophisoa ha data ea setšoantšo sa ho kenya le ho tsoa ho ipapisitse le boemo ba sekotjana sa katoloso. Lipalo tsa tlhophiso ena li kenyelelitsoe libukeng tsa li-networadapterser le li-programmable IO modules.
- Lintlha tse sebetsang tsa parameter li ipapisitse le li-module tse sebelisoang. Bakeng sa mohlalaample, li-module tsa analoge li na le litlhophiso
ea 0-20 mA kapa 4-20 mA, 'me li-module tsa mocheso li na le li-setting tse kang PT100, PT200, le PT500. - Litokomane tsa mofuta o mong le o mong li hlalosa data ea parameter.
Litlhaloso
Litlhaloso tsa Tikoloho
| Mocheso oa ho sebetsa | -20°C – 60°C |
| UL mocheso | -20°C – 60°C |
| Mocheso oa polokelo | -40°C – 85°C |
| Mongobo o amanang | 5% - 90% e sa lumellaneng |
| Ho phahamisa | DIN seporo |
| Ts'ebetso ea ts'oenyeho | IEC 60068-2-27 (15G) |
| Khanyetso ea ho thothomela | IEC 60068-2-6 (4 g) |
| Likhase tsa indasteri | EN 61000-6-4: 2019 |
| Tšireletso ea indasteri | EN 61000-6-2: 2019 |
| Boemo ba ho kenya | E otlolohileng le e tshekaletseng |
| Setifikeiti sa lihlahisoa | CE, FCC, UL, cUL |
Litlhaloso Kakaretso
| Ho felloa ke matla | Max. 200 mA @ 5 VDC |
| Ho behwa ka thoko | I/O ho logic: Ho itšehla thajana ha Photocoupler
Matla a lebaleng: Ha a hokahane |
| UL matla a tšimo | Phepelo voltage: 24 VDC lebitso, sehlopha sa2 |
| Matla a tšimo | Ha e sebelisoe (karolo ea matla a lebaleng ho mojule o latelang oa katoloso) |
| Wiring e le 'ngoe | I/O cable max. 1.0mm2 (AWG 14) |
| Boima ba 'mele | 63 g |
| Boholo ba module | 12 mm x 109 mm x 70 mm |
Litekanyo
Litlhaloso tsa ho Kena
| Lintho tse kenang ka mojule | Likanale tse 8 tse fapaneng, tse sa arohaneng lipakeng tsa kanale |
| Lipontšo | 1 boemo ba G-bese bo botala |
| Qeto ka mekhahlelo | 12 bits: 2.44 mV/bit (0 - 10 V)
12 bits: 1.22 mV/bit (0 - 5 V) 12 bits: 4.88 mV/Bit (-10 - 10 V) 12 bits: 2.44 mV/bit (-5 - 5 V) |
| Input mefuta e fapaneng | 0 – 10 VDC, 0 – 5 VDC, -10 – 10 VDC, -5 – 5 VDC |
| Sebopeho sa data | 16 bits integer (2′ ea thoriso) |
| Phoso ea module | ±0.1 % sekala se felletseng @ 25 ℃ tikoloho
±0.3 % sekala se felletseng @ -40 ℃, 70 ℃ |
| Kenyelletso ea ho kenya | 667 lik'hilograma |
| Nako ea ho sokoloha | 2 ms / likanale tsohle |
| Tekanyetso | Ha ho hlokahale |
Setšoantšo sa Wiring
| Tšoaea no. | Tlhaloso ea lets'oao |
| 0 | Kenya mocha 0(+) |
| 1 | Kenya mocha 0(-) |
| 2 | Kenya mocha 1(+) |
| 3 | Kenya mocha 1(-) |
| 4 | Kenya mocha 2(+) |
| 5 | Kenya mocha 2(-) |
| 6 | Kenya mocha 3(+) |
| 7 | Kenya mocha 3(-) |
| 8 | Kenya mocha 4(+) |
| 9 | Kenya mocha 4(-) |
| 10 | Kenya mocha 5(+) |
| 11 | Kenya mocha 5(-) |
| 12 | Kenya mocha 6(+) |
| 13 | Kenya mocha 6(-) |
| 14 | Kenya mocha 7(+) |
| 15 | Kenya mocha 7(-) |
| 16 | Kenyelletso ea mocha (AGND) |
| 17 | Kenyelletso ea mocha (AGND) |
Letšoao la LED
| Nomoro ea LED. | LED mosebetsi/tlhaloso | Mmala oa LED |
| 0 | Boemo ba LED | Botala |
Boemo ba Channel ea LED
| Boemo | LED | E supa |
| Boemo ba G-Bus | TLOA
Botala |
Ho khaoha
Khokahano |
Boleng ba Lintlha / Moqtage
Moqtagmefuta e fapaneng: 0 - 10 V
| Moqtage | 0 V | 2.5 V | 5.0 V | 10.0 V |
| Lintlha(Hex) | H0000 | H03FF | H07FF | H0FFF |
Moqtagmefuta e fapaneng: 0 - 5 V
| Hona joale | 0 V | 1.25 V | 2.5 V | 5.0 V |
| Lintlha(Hex) | H0000 | H03FF | H07FF | H0FFF |
Moqtage fapaneng: -10 - 10 V
| Hona joale | -10 V | -5 V | 0 V | 5.0 V | 10.0 V |
| Lintlha(Hex) | HF800 | HFC00 | H0000 | H03FF | H07FF |
Moqtagmefuta e fapaneng: -5 - 5 V
| Hona joale | -5 V | -2.5 V | 0 V | 2.5 V | 5.0 V |
| Lintlha(Hex) | HF800 | HFC00 | H0000 | H03FF | H07FF |
Ho etsa 'mapa oa data ka har'a tafole ea litšoantšo
Kenya lintlha tsa mojule
| Kenyelletso ea Analog Ch 0 |
| Kenyelletso ea Analog Ch 1 |
| Kenyelletso ea Analog Ch 2 |
| Kenyelletso ea Analog Ch 3 |
| Kenyelletso ea Analog Ch 4 |
| Kenyelletso ea Analog Ch 5 |
| Kenyelletso ea Analog Ch 6 |
| Kenyelletso ea Analog Ch 7 |
Kenya boleng ba setšoantšo
| Empa che. | hanyane 7 | hanyane 6 | hanyane 5 | hanyane 4 | hanyane 3 | hanyane 2 | hanyane 1 | hanyane 0 |
| Byte 0 | Kenyelletso ea Analog Ch 0 low byte | |||||||
| Byte 1 | Kenyelletso ea Analog Ch 0 high byte | |||||||
| Byte 2 | Kenyelletso ea Analog Ch 1 low byte | |||||||
| Byte 3 | Kenyelletso ea Analog Ch 1 high byte | |||||||
| Byte 4 | Kenyelletso ea Analog Ch 2 low byte | |||||||
| Byte 5 | Kenyelletso ea Analog Ch 2 high byte | |||||||
| Byte 6 | Kenyelletso ea Analog Ch 3 low byte | |||||||
| Byte 7 | Kenyelletso ea Analog Ch 3 high byte | |||||||
| Byte 8 | Kenyelletso ea Analog Ch 4 low byte | |||||||
| Byte 9 | Kenyelletso ea Analog Ch 4 high byte | |||||||
| Byte 10 | Kenyelletso ea Analog Ch 5 low byte | |||||||
| Byte 11 | Kenyelletso ea Analog Ch 5 high byte | |||||||
| Byte 12 | Kenyelletso ea Analog Ch 6 low byte | |||||||
| Byte 13 | Kenyelletso ea Analog Ch 6 high byte | |||||||
| Byte 14 | Kenyelletso ea Analog Ch 7 low byte | |||||||
| Byte 15 | Kenyelletso ea Analog Ch 7 high byte | |||||||
Lintlha tsa parameter
Bolelele bo nepahetseng ba parametha: 6 li-byte
| Byte | hanyane 7 | hanyane 6 | hanyane 5 | hanyane 4 | hanyane 3 | hanyane 2 | hanyane 1 | hanyane 0 |
| 0 | Ch#0 Taelo (H00: 0 – 10 V, H01: 0 – 5 V, H02: -10 – 10 V, H03: -5 – 5 V) | |||||||
| 1 | Ch#1 Taelo (H00: 0 – 10 V, H01: 0 – 5 V, H02: -10 – 10 V, H03: -5 – 5 V) | |||||||
| 2 | Ch#2 Taelo (H00: 0 – 10 V, H01: 0 – 5 V, H02: -10 – 10 V, H03: -5 – 5 V) | |||||||
| 3 | Ch#3 Taelo (H00: 0 – 10 V, H01: 0 – 5 V, H02: -10 – 10 V, H03: -5 – 5 V) | |||||||
| 4 | Ch#4 Taelo (H00: 0 – 10 V, H01: 0 – 5 V, H02: -10 – 10 V, H03: -5 – 5 V) | |||||||
| 5 | Ch#5 Taelo (H00: 0 – 10 V, H01: 0 – 5 V, H02: -10 – 10 V, H03: -5 – 5 V) | |||||||
| 6 | Ch#6 Taelo (H00: 0 – 10 V, H01: 0 – 5 V, H02: -10 – 10 V, H03: -5 – 5 V) | |||||||
| 7 | Ch#7 Taelo (H00: 0 – 10 V, H01: 0 – 5 V, H02: -10 – 10 V, H03: -5 – 5 V) | |||||||
| 8 | Nako ea ho sefa (H00: Sefe ea kamehla (20), H01: E potlakile ka ho fetisisa – H3E: Butle ka ho Fetisisa) | |||||||
| 9 | Reserved | |||||||
Ho hlophisoa ha Hardware
TLHOKOMELO
- Bala khaolo ena kamehla pele o kenya module!
- Sebaka se chesang! Bokaholimo ba ntlo bo ka chesa nakong ea ts'ebetso. Haeba sesebelisoa se sebelisoa mochesong o phahameng oa tikoloho, kamehla tlohela sesebelisoa hore se phomole pele u se tšoara.
- Ho sebetsa ka lisebelisoa tse matlafalitsoeng ho ka senya thepa! Kamehla tima motlakase pele o sebetsa sesebelisoa.
Litlhoko tsa Sebaka
Litšoantšo tse latelang li bontša litlhoko tsa sebaka ha u kenya li-module tsa G-Series. Sekheo se theha sebaka sa moea le ho thibela tšitiso e etsoang ke electromagnetic ho susumetsa ts'ebetso. Boemo ba ho instola bo nepahetse bo otlolohile ebile bo tšekaletse. Litšoantšo li na le litšoantšo 'me li ka 'na tsa se ke tsa lekana.
TLHOKOMELO
HO SE latele ditlhoko tsa sebaka ho ka baka ho senya sehlahisoa.
Mount Module ho DIN Rail
Likhaolo tse latelang li hlalosa mokhoa oa ho kenya mojule seporong sa DIN.
TLHOKOMELO
Mojule o tlameha ho ts'oaroa ho seporo sa DIN ka lithapo tsa ho notlela.
Thaba ea GL-9XXX kapa GT-XXXX Module
Litaelo tse latelang li sebetsa mefuteng ena ea li-module:
- GL-9XXX
- GT-1XXX
- GT-2XXX
- GT-3XXX
- GT-4XXX
- GT-5XXX
- GT-7XXX
Li-module tsa GN-9XXX li na le lisebelisoa tse tharo tsa ho notlela, e 'ngoe e le ka tlase le tse peli ka lehlakoreng. Bakeng sa litaelo tsa ho holisa, sheba Mount GN-9XXX Module.
Thaba ea GN-9XXX Module
Ho kenya kapa ho theola adaptara ea netweke kapa mojule oa IO o ka sebelisoang ka lebitso la sehlahisoa GN-9XXX, bakeng sa mohlala.ample, GN-9251 kapa GN-9371, bona litaelo tse latelang:
Mount Removable Terminal Block
Ho hloma kapa ho theola "terminal block" (RTB), sheba litaelo tse ka tlase.
Hokela Lithapo ho Thibelo ea Removable Terminal Block
Ho hokela/ho hakolla lithapo ho/ho tloha borokhong bo ka ntshuwang (RTB), sheba ditaelo tse ka tlase.
TLHOKOMELO
Kamehla sebelisa tlhahiso e khothaletsoang voltage le makhetlo a mangata ho thibela tšenyo ea lisebelisoa le ho netefatsa ts'ebetso e nepahetseng.
Matla a Tšimo le Lithako tsa Lintlha
Puisano pakeng tsa adaptara ea marang-rang ea G-Series le module ea ho atolosa, hammoho le tsamaiso / matla a tšimo ea li-module tsa libese, e etsoa ka bese e ka hare. E na le 2 Field Power Pins le 6 Data Pins.
TLHOKOMELO
Se ke oa ama lintlha le lithakhisa tsa matla a tšimo! Ho ama ho ka fella ka ho silafatsoa le ho senyeha ka lerata la ESD.
| Tšoaea no. | Lebitso | Tlhaloso |
| P1 | Sistimi ea VCC | Phepelo ea sistimi voltage (5 VDC) |
| P2 | Sistimi ea GND | Sebaka sa tsamaiso |
| P3 | Sephetho sa token | Boema-kepe ba token ea module ea processor |
| P4 | Tlhahiso ea serial | Transmitter port port ea module ea processor |
| P5 | Tlhahiso ea serial | Boema-kepe ba ho amohela mojule oa processor |
| P6 | Reserved | E boloketsoe token ea bypass |
| P7 | Tšimong GND | Sebaka sa tšimo |
| P8 | Sebaka sa VCC | Phepelo ea masimong voltage (24 VDC) |
Copyright © 2025 Beijer Electronics AB. Litokelo tsohle li sirelelitsoe.
- Lintlha tse tokomaneng ena li ka fetoha ntle le tsebiso mme li fanoa joalo ka ha li fumaneha ka nako ea khatiso. Beijer Electronics AB e na le tokelo ea ho fetola tlhahisoleseding leha e le efe ntle le ho ntlafatsa khatiso ena. Beijing
- Electronics AB ha e nke boikarabello bakeng sa liphoso leha e le life tse ka hlahang tokomaneng ena. Tsohle exampLes tokomaneng ena e reretsoe feela ho ntlafatsa kutloisiso ea ts'ebetso le ts'ebetso ea lisebelisoa. Beijing
- Electronics AB e ke ke ea nka boikarabelo leha e le bofe haeba tsena ke tsa peleamples li sebelisoa lits'ebetsong tsa 'nete.
- Ka lebaka la mefuta e mengata ea lits'ebetso tsa software ena, basebelisi ba tlameha ho fumana tsebo e lekaneng ho netefatsa hore e sebelisoa ka nepo ts'ebelisong ea bona e ikhethileng. Batho ba ikarabellang bakeng sa kopo le lisebelisoa ba tlameha ho netefatsa hore kopo e 'ngoe le e 'ngoe e lumellana le litlhoko tsohle tse amehang, litekanyetso le molao mabapi le tlhophiso le polokeho. Beijer Electronics AB e ke ke ea amohela boikarabello bakeng sa tšenyo leha e le efe e etsahetseng nakong ea ho kenya kapa ho sebelisoa thepa e boletsoeng tokomaneng ena.
- Beijer Electronics AB e thibela liphetoho tsohle, liphetoho, kapa phetolo ea lisebelisoa.
Ntlo-kholo
- Beijer Electronics AB
- Lebokose la 426
- 201 24 Malmö, Sweden
- www.beijerelectronics.com
- +46 40 358600
Lipotso Tse Botsoang Hangata
- P: Ke lokela ho etsa eng haeba ke kopana le khoutu ea phoso ho letšoao la LED?
A: Haeba u bona khoutu ea phoso, sheba bukana ea mosebelisi bakeng sa mehato ea ho rarolla mathata. Lekola likhokahano le phepelo ea motlakase ho netefatsa hore li sebetsa hantle. - P: Na nka sebelisa mojule ona ka voltage ka ntle ho mekha e boletsoeng?
A: Ho khothalletsoa ho lula ka har'a molumo o boletsoengtage ho qoba tšenyo ea module le ho netefatsa ho bala ho nepahetseng.
Litokomane / Lisebelisoa
 |
Beijer Electronics GT-3928 Analog Input Module [pdf] Bukana ea Mosebelisi GT-3928 Analog Input Module, GT-3928, Analog Input Module, Input Module |
