NFA-T01CM Addressable Input Control Module

Product Information

Zvinotsanangurwa

• Model: NFA-T01CM
• Kutevedzera: EN54-18:2005
• Mugadziri: Norden Communication UK Ltd.
• Addressable Input/Output Control Module

Mirayiridzo Yekushandiswa Kwechigadzirwa

Installation

Tevedza matanho ari pazasi ekumisikidza kwakakodzera:

Kugadzirira Kuisa

Ita shuwa kuti maturusi ese anodiwa uye zvishandiso zviripo usati watanga kugadzika maitiro.

Installation uye Wiring

Tarisa kubhuku rekuisa kune yakadzama mirairo pane wiring module nemazvo kuti uve nechokwadi chekushanda kwakaringana.

Interface Module Configuration

Gadzirisa iyo interface module sekuenderana neanotevera nhungamiro:

Kugadzirira

Usati wagadziriswa, ita shuwa kuti unokwanisa kuwana zvinyorwa zvinodiwa uye software.

Nyora: Kunyorera

Seta maparameter ekutaura zvinoenderana nezvinodiwa zvinotsanangurwa mubhuku rekushandisa.

Feedback Mode

Gonesa maitiro emhinduro kuti ugamuchire zvigadziriso kubva kumidziyo yakabatana.

Input Check Mode

Activate input check mode kuti utarise masigning ekuisa zvakanaka.

Output Check Mode

Shandisa inobuda cheki modhi kuti uone kushanda kwemasaini ekubuda.

Verenga Kugadziridza

Review uye simbisa zvigadziriso zvakagadziriswa kuti uve nechokwadi chekushanda kwakakodzera.

General Maintenance

Gara uchiongorora uye kuchenesa module kudzivirira kuunganidzwa kweguruva uye kuve nechokwadi chekuita kwakakwana.

Dambudziko rekugadzirisa

Tarisa kuchikamu chekugadzirisa matambudziko chiri mubhuku kuti ubatsirwe mukugadzirisa chero nyaya dzekushanda.

Product Safety

• Kuti udzivise kukuvara kwakanyanya uye kurasikirwa kwehupenyu kana pfuma, verenga rairo nekungwarira usati waisa module kuti uve nechokwadi chekushanda kwakachengeteka uye kwakachengeteka kwehurongwa.
• European Union directive:2012/19/EU (WEEE rairo): Zvigadzirwa zvakaiswa chiratidzo ichi hazvigone kuraswa semarara emanisipala asina kurongedzwa muEuropean Union. Kuti udzokorore zvakare, dzorera chigadzirwa ichi kumutengesi weko kana watenga michina mitsva yakaenzana, kana kuirasa panzvimbo dzakatarwa dzekuunganidza.
• Kuti uwane rumwe ruzivo ndapota shanyira iyo website pa www.wvapeworld.info
• EN54 Chikamu 18 Kutevedzera
• NFA-T01CM Addressable Input/Output Control Module inoenderana nezvinodiwa zveEN 54-18:2005.

Nhanganyaya

Overview

• Iyo addressable Input Output Control Module inoshanda seyakasiyana-siyana yekupinda / kubuda relay uye control unit. Kazhinji, inoshandiswa kupfuudza mabasa akasiyana siyana emidziyo, anosanganisira anodzosa anodzosa, magonhi, mafeni ekubvisa utsi, mayuniti ekubata mhepo, uye auto-dialers kumoto brigade uye kuvaka man-agement system (BMS). Zvikuru, iyi module ine yakavakirwa-mukati mhinduro chiratidzo meshini. Kana pre-yakagadzirirwa interface module inoraira mamiriro emoto, iyo alarm controller inotumira yekutanga com-mand kumidziyo yakakodzera. Pakugamuchira uyu murairo, iyo inobuda module inomutsa relay yayo, zvichikonzera shanduko yemamiriro. Zvadaro, kana module yave pasi pekutonga uye kushanda, chiratidzo chekusimbisa chinodzoserwa kumashure kune alarm controller.
• Pamusoro pezvo, iyo unit inosanganisira yakangwara processor inongotarisa ese akavhurika uye mapfupi maseketi mumutsara wekuisa chiratidzo. Iyo unit inogadzirwa zvine hungwaru kuti isangane nezvinodiwa zve EN 54 Chikamu 18 European Standard. Dhizaini yaro haisi kungofadza chete asiwo inobtrusive, isina musono kusanganisa neyazvino kuvaka-ing architecture. Iyo plug-in gungano inorerutsa kuisa uye kugadzirisa, ichipa nyore kune vanoisa. Zvakakosha, iyi unit inoenderana zvizere neNFA-T04FP Analogue Intelligent Fire Alarm Control Panel uye kuenderana uku kunogonesa kutaurirana kusingagadzirike, kubvisa chero zvingangoitika nyaya.

Feature uye Benefits

• EN54-18 Kutevedza
• Yakavakirwa-mukati MCU processor uye dijitari kero
• 24VDC/2A Output relay kuonana uye Kudzora module
• Input Moto kana Supervisory chiratidzo chekugadzirisa
• Chiratidzo chemamiriro e LED
• Onsite Adjustable Parameter
• Loop kana simba rekunze rekuisa
• Aesthetically inofadza dhizaini
• Surface mounting ine fix base yekuisa nyore

Kutsanangurwa Kwehunyanzvi

• Yakanyorwa LPCB Certification
• Kutevedzera EN 54-18:2005
• Chiyamuro Voltage Loop Simba:24VDC [16V kusvika 28V] Yekunze PSU: 20 kusvika 28VDC
• Ikozvino Consumption Loop: Standby 0.6mA, Aramu: 1.6mA
• External PSU: Standby 0.6mA, Aramu: 45mA
• Kudzora kubuda voltage 24VDC / 2A chiyero
• Input Relay Kazhinji Vhura yakaoma kuonana
• Input Resistance 5.1Kohms/ ¼ W
• Protocol/Addressing Norden, Kukosha kunotangira pa1 kusvika ku254
• Chiratidzo Mamiriro Akajairika: Kubwaira kamwe/Kushanda: Yakatsiga/Kutadza: Blink yakapetwa kaviri
• Material / Rudzi ABS / White Glossy kupera
• Dimension / LWH 108 mm x 86 mm x38 mm
• Huremu 170g (neBase), 92g (pasina Chigadziko)
• Kushanda Tembiricha -10°C kusvika +50°C
• Ingress Dziviriro Rating IP30
• Humidity 0 kusvika 95% Relative Humidity, Non condensing

Installation

Kugadzirira Kuisa

• Iyi interface module inofanirwa kuiswa, kutumwa uye kuchengetedzwa neanokwanisa kana fekitori akadzidziswa sevhisi vashandi. Iko kuisirwa kunofanirwa kuiswa mukuteerana nemakodhi ese emunharaunda ane hutongi munharaunda yako kana BS 5839 Chikamu 1 uye EN54.
  Zvigadzirwa zveNorden zvine huwandu hwemainterfaces, yega yega interface module yakagadzirirwa chaiyo ap-plication, zvakakosha kuti titarise zvinodikanwa zvemativi ese eiyo interface kudzivirira kusashanda uye yakajairika kukanganisa mamiriro. Yambiro huru ndeyekuona kuti voltage chiyero chemidziyo uye interface module inowirirana.

Installation uye Wiring

1. Isa iyo interface module base pane yakajairwa imwe [1] gang remagetsi kumashure bhokisi. Tevera museve mucherechedzo wenzvimbo chaiyo. Usawedzere-kusimbisa screws zvikasadaro base ichamonyoroka. Shandisa maviri M4 akajairwa screws.
2. Batanidza waya muchiteshi maererano nezvinodiwa sezvakaratidzwa mumufananidzo wechipiri [2] kusvika shanu [5]. Tarisa kero yemudziyo uye mamwe ma parameter wobva wanamatira pane iyo label usati waisa module. Iwo anonamirwa mavara anowanikwa pane control panel. Rongedza iyo interface module uye ma tabo uye zvinyoro nyoro kusundira mudziyo kusvika wakiya panzvimbo.
3. Mufananidzo 1: I / O Control Module Structure

Tsananguro Yemagetsi

• Z1 Chiratidzo Mu (+) :D1 Ekunze Simba Rokupa Mu (+)
• Z1 Signal Out (+) :D2 Ekunze Simba Rekupa Mukati (-)
• Z2 Signal In (-) :D3 Ekunze Simba Rekupa Kunze (+)
• Z2 Signal Out (-) :D4 Ekunze Simba Rekupa Kunze (-)
• RET Input Cable:COM Inobuda Cable
• G Input Cable :HAPANA, NC Inoburitsa Cable
• Mufananidzo 2: Input Wiring Details
• Cherechedza: Shandura iyo parameter Input Check kuita 3Y (Loop Powered)
• Mufananidzo 3: Relay Output Wiring Details (Loop Powered) inonyanya kushandiswa

Signal	Monitoring	Kana Off(zvakajairika)	Kana Yakabatidzwa (kushanda)
Input	HONGU (Zvichida)	Kazhinji Open	Kazhinji Kuvhara
Relay Output	EHE	Kazhinji Open	Kazhinji Kuvhara
		Kazhinji Kuvhara	Kazhinji Open
Power Limited Output	EHE	+1.5-3Vdc	+ 24Vdc

Input/output Parameters

Signal	Feedback	Input Check	Output Check
Input	–	3Y (Hongu)- Yakwana neinopikisa - 4N (Kwete)- Hapana chinopikisa chinodiwa --Default setting	–
Relay Output	1Y (Hongu)- Nekuzvida 2N (Kwete)- NeZVEkunze - (Cherechedza: maererano neInput sign) Default setting	–	–
	1Y (Hongu)- Nekuzvida	–	5Y(Hongu)-Tarisa 24VDC
Power Limited	2N (Kwete)- NeZVEkunze -		kuenderera mberi - Default setting
Output	(Cherechedza: maererano ne Input chiratidzo) Default setting		6N(Kwete)- Hapana kutarisira

Interface Module Configuration

Kugadzirira

• Iyo NFA-T01PT Programming chishandiso inoshandiswa kugadzirisa interface module yakapfava kero uye parameter. Zvishandiso izvi hazvibatanidzwe, zvinofanirwa kutengwa zvakasiyana. Chishandiso chechirongwa chakazara nemapatya 1.5V AA bhatiri uye tambo, yakagadzirira kushandiswa kana yangogamuchirwa.
• Izvo zvinosungirwa kuti vashandi vekomisheni vave neprogramming tool kuitira kuti vagadzirise module inopa kune saiti mamiriro uye zvakatipoteredza zvinodiwa.
• Ronga nhamba yekero yakasarudzika yechishandiso chega chega zvinoenderana nemagadzirirwo eprojekiti usati waisa kubva kuTerminal Base.
• Yambiro: Bvisa loop yekubatanidza paunenge uchibatanidza kune chirongwa chekugadzira.

Nyora: Kunyorera

1. Batanidza tambo yekuronga kuZ1 uye Z2 terminals (Mufananidzo 6). Dzvanya "Simba" kuti uchinje pane unit.
2. Chinja-pane chirongwa chekugadzira, wobva wadzvanya bhatani "Nyora" kana nhamba "2" kuti uise Nyora Ad-dress mode (Mufananidzo 7).
3. Isai chishuwo kero kero kukosha kubva 1 kusvika 254, uye ipapo tinya "Nyora" kuchengetedza kero itsva (Figure 8).
   • Cherechedza: Kana kuratidza "Kubudirira", zvinoreva kuti kero yakapinda inosimbiswa. Kana kuratidza "Kukundikana", zvinoreva kukundikana kuronga kero (Mufananidzo 9).
4. Dzvanya "Buda" kiyi kuti udzokere Main Menu. Dzvanya "Simba" kiyi yekudzima-programming chishandiso.

Feedback Mode

1. Feedback mode ine marudzi maviri, SELF neEXTERNAL. Pasi peSELF-feedback mode, kana iyo inter-face module yakagamuchira murairo unoshanda kubva papaneti, module inotumira inotumira chiratidzo chemhinduro kune control panel, padivi peFeedback LED chiratidzo chinoenda kuvhura. Nepo iyo Ex-yemukati-yemhinduro modhi ichaita zvakafanana kana iyo interface module inoona chiratidzo chemhinduro kubva kuInput terminal. Default setting ndeye External-feedback mode.
2. Batanidza tambo yekuronga kuZ1 uye Z2 terminals (Mufananidzo 6). Dzvanya "Simba" kuti uchinje-pane iyo unit.
3. Shandura-pane chirongwa chekugadzira, wobva wadzvanya bhatani "3" kuti upinde kuKugadzirisa mode (Mufananidzo 10).
4. Isa "1" yeSelf-feedback mode kana "2" yeExternal-feedback mode wobva wadzvanya "Nyora" kuti uchinje marongero (Mufananidzo 11).
   • Cherechedza: Kana kuratidza "Kubudirira", zvinoreva kuti yakapinda mode inosimbiswa. Kana kuratidza "Kukundikana", zvinoreva kutadza kuronga maitiro.
5. Dzvanya "Buda" kiyi kuti udzokere Main Menu. Dzvanya "Simba" kudzima chishandiso chekugadzira.

Input Check Mode

1. Input Cheki modhi inoshandiswa kugonesa yekuisa tambo yekutarisa, iyi sarudzo inowanikwa kana parameter yaiswa ku3Y ine yakarongedzerwa magumo emutsetse anopikisa. Iyo module yekutarisa inoshuma kune pani kana chiitiko chakavhurika kana chipfupi chedunhu chikaitika mune wiring.
2. Kuseta kutarisa mode. Batanidza tambo yekuronga kuZ1 uye Z2 terminals (Mufananidzo 6). Dzvanya "Simba" kuti uchinje-pane iyo unit.
3. Shandura-pane chirongwa chekugadzira, wobva wadzvanya bhatani "3" kuti upinde kuKugadzirisa mode (Mufananidzo 12).
4. Isa "3" kiyi yeCheck mode wobva wadzvanya "Nyora" kuti uchinje marongero (Mufananidzo 13).
   • Cherechedza:Kana kuratidza "Kubudirira", zvinoreva kuti yakapinda mode inosimbiswa. Kana kuratidza "Kukundikana", zvinoreva kutadza kuronga maitiro.
5. Dzvanya "Buda" kiyi kuti udzokere Main Menu. Dzvanya "Simba" kudzima chishandiso chekugadzira.

Output Check Mode

1. Output Check mode inoshandiswa kugonesa voltage monitoring. Iyo module inozivisa kune pani kana yakadzikira voltage kubuda kunokonzerwa nekuvhurika uye kupfupika kunoitika mu wiring.
2. Batanidza tambo yekuronga kuZ1 uye Z2 terminals (Mufananidzo 6). Dzvanya "Simba" kuti uchinje-pane iyo unit.
3. Shandura-pane chirongwa chekugadzira, wobva wadzvanya bhatani "3" kuti upinde kuKugadzirisa mode (Mufananidzo 14).
4. Isa "5" yeCheck mode wobva wadzvanya "Nyora" kuti uchinje marongero (Mufananidzo 15).
   • Cherechedza: Kana kuratidza "Kubudirira", zvinoreva kuti yakapinda mode inosimbiswa. Kana kuratidza "Kukundikana", zvinoreva kutadza kuronga maitiro.
5. Dzvanya "Buda" kiyi kuti udzokere Main Menu. Dzvanya "Simba" kudzima chishandiso chekugadzira.

Verenga Kugadziridza

1. Batanidza tambo yekuronga kuZ1 uye Z2 terminals (Mufananidzo 6). Dzvanya "Simba" kuti uchinje-pane iyo unit.
2. Chinja-pane chirongwa chekushandisa, wobva wadzvanya bhatani "Verenga" kana "1" kuti upinde muKuverenga mode (Mufananidzo 16). Iyo programming turusi icharatidza gadziriso mushure memasekondi mashoma. (Mufananidzo 17).
3. Dzvanya "Buda" kiyi kuti udzokere Main Menu. Dzvanya "Simba" kiyi kuti udzime chishandiso chekugadzira.

General Maintenance

1. Zivisai vashandi vakakodzera musati maita kugadzirisa.
2. Dzima iyo interface module pane control panel kudzivirira nhema alarm.
3. Usaedza kugadzirisa kutenderera kweiyo interface module, inogona kukanganisa mashandiro ekupindura mamiriro emoto uye inobvisa waranti yemugadziri.
4. Shandisa adamp jira kuchenesa pamusoro.
5. Zivisa zvakare vashandi vakakodzera mushure mekuita gadziriso uye ita shuwa yekugonesa iyo interface module uye simbisa kana yakakwira uye ichimhanya.
6. Ita gadziriso pane semi-pagore kana zvinoenderana nemamiriro esaiti.

Dambudziko rekugadzirisa

Zvaunoona	Zvazvinoreva	Zvekuita
Kero isiri kunyoresa	Iyo wiring yakasununguka Kero yacho yakapetwa	Kuitisa kugadzirisa Re-Komidza mudziyo
Kutadza kutumwa	Kukuvadzwa kwemagetsi emagetsi	Tsiva mudziyo

Appendikisi

Kuganhurirwa kweInterface Module

• Iyo Interface Module haigone kugara nekusingaperi. Kuti uchengetedze iyo interface module ichishanda mune yakanaka, ndapota chengetedza michina nguva nenguva maererano nekurudziro kubva kune vanogadzira uye nehukama nyika makodhi nemitemo. Tora matanho ekuchengetedza chaiwo pahwaro hwezvakatipoteredza-nzvimbo.
• Iyi interface module ine zvikamu zvemagetsi. Kunyangwe ichiitwa kuti igare kwenguva yakareba, chero yezvikamu izvi inogona kukundikana chero nguva. Naizvozvo, edza module yako kanokwana hafu yegore-kunoenderana nemakodhi enyika kana mitemo. Chero interface module, moto alarm zvishandiso kana chero zvimwe zvikamu zveiyo system zvinofanirwa kugadziriswa uye / kana kutsiviwa nekukasira sezvavanotadza.

mamwe mashoko

• Norden Communication UK Ltd.
• Chikamu 10 Baker Pedyo, Oakwood Bhizinesi Park Clacton-On- Gungwa, Essex
• NHOROONDO YECHIPOSHA:CO15 4BD
• Tel : +44 (0) 2045405070
• E-mail : salesuk@norden.co.uk
• www.nordencommunication.com

FAQs

• Mubvunzo: Ndekupi kwandingawana rumwe ruzivo nezvekuchengetedzwa kwechigadzirwa?
  • A: Shanyira www.nordencommunication.com kune ruzivo rwakadzama rwekuchengetedza chigadzirwa.

Zvinyorwa / Zvishandiso

NORDEN NFA-T01CM Addressable Input Control Module [pdf] Installation Guide NFA-T01CM, NFA-T01CM Addressable Input Control Module, NFA-T01CM, Addressable Input Control Module, Input Control Module, Control Module, Module

References

• User Manual