NORDEN NFA-T01CM Ntuziaka nwụnye modul njikwa ntinye ntinye aka

Iji gbochie mmerụ ahụ siri ike na ọnwụ nke ndụ ma ọ bụ ihe onwunwe, gụọ ntuziaka ahụ nke ọma tupu ịwụnye modul iji hụ na arụ ọrụ nke ọma na nchekwa nke usoro ahụ.

Ntuziaka European Union:2012/19/EU ( ntụziaka WEEE): Ngwaahịa ndị nwere akara a enweghị ike ịwụfu dị ka mkpofu obodo anaghị ahazi na European Union. Maka imegharị ihe, weghachi ngwaahịa a n'aka onye na-ebubata ngwaahịa mpaghara gị mgbe ịzụrụ ngwa ọhụrụ dakọtara, ma ọ bụ tụfuo ya n'ebe nchịkọta ahapụtara.
Maka ozi ndị ọzọ biko gaa na websaịtị na www.recyclethis.info
EN54 Nkebi 18 nnabata
NFA-T01CM Ihe njikwa ntinye/mpụta njikwa na-akwado ihe achọrọ nke EN 54-18: 2005.

Okwu mmalite

gafereview

Module njikwa ntinye ntinye adreesị adreesị na-arụ ọrụ dị ka nkeji ntinye/mmepụta na njikwa njikwa. Dịka, a na-arụ ọrụ iji mebie ọrụ akụrụngwa dị iche iche, gụnyere nlọghachi azụ, ndị na-ejide ọnụ ụzọ, ndị na-ese anwụrụ ọkụ, akụkụ ikuku, na ndị na-ahụ maka ọkụ na ụlọ ọrụ ụlọ ọrụ (BMS). N'ụzọ doro anya, modul a nwere usoro mgbama nzaghachi arụnyere arụnyere. Mgbe modul interface ahaziri nke ọma nyere iwu ọnọdụ ọkụ, onye njikwa mkpu na-eziga iwu mmalite na ngwa ndị dị mkpa. Mgbe ịnata iwu a, modul mmepụta na-eme ka relay ya rụọ ọrụ, na-ebute mgbanwe nke ala. Na-esote, ozugbo modul ahụ nọ n'okpuru njikwa ma rụọ ọrụ, a na-ebunye mgbaama nkwenye azụ na njikwa mkpu.
Na mgbakwunye, unit ahụ na-etinye ihe nhazi nwere ọgụgụ isi nke na-enyocha ma sekit mepere emepe na nke dị mkpụmkpụ n'ahịrị mgbaama ntinye. Emebere ngalaba ahụ nke ọma iji mezuo ihe achọrọ nke EN 54 Part 18 European Standard. Nhazi ya abụghị naanị na ọ na-atọ ụtọ kamakwa ọ na-adịghị ahụ anya, na-ejikọta ya na ihe owuwu nke ọgbara ọhụrụ. Mgbakọ nkwụnye ahụ na-eme ka nrụnye na nrụzi dị mfe, na-enye ihe dị mma maka ndị nrụnye. N'ụzọ dị mkpa, ngalaba a dakọtara nke ọma na NFA-T04FP Analogue Intelligent Fire Alarm Control Panel na ndakọrịta a na-eme ka nkwurịta okwu na-enweghị nsogbu, na-ewepụ nsogbu ọ bụla nwere ike ime.

Njirimara na uru

EN54-18 nnabata
Ihe nrụpụta MCU arụnyere na adreesị dijitalụ
24VDC/2A mmepụta kọntaktị na modul njikwa
Ntinye Ọkụ ma ọ bụ nhazi akara ngosi
Ihe ngosi ọkwa LED
Paramita enwere ike idozi na saịtị
Ntinye aka ma ọ bụ ike mpụga
Nhazi mara mma
Ịkwado elu na ntọala ndozi maka nrụnye dị mfe

Nkọwa nka nka

Edepụtara LPCB Asambodo
Nkwekọrịta EN 54-18:2005

Ntinye Voltage Ike Loop: 24VDC [16V ruo 28V] Mpụga PSU: 20 ruo 28VDC
Usoro oriri ugbu a: Njikere 0.6mA, Mkpu: 1.6mA
PSU mpụga: Njikere 0.6mA, Mkpu: 45mA

Njikwa mmepụta voltage 24VDC/2A ọkwa
Ntinye ọsọ ọsọ na-emeghe kọntaktị akọrọ
Ntinye nguzogide 5.1Kohms/ ¼ W

Protocol/Addressing Norden, Uru sitere na 1 ruo 254
Ọkwa ngosi Nkịtị: Otu ntabi anya/Na-arụ ọrụ: kwụgidere/mmejọ: Blink ugboro abụọ
Ihe / Agba ABS / White Glossy agwụcha

Akụkụ / LWH 108 mm x 86 mm x38 mm
Ibu 170g (ya na isi), 92g (na-enweghị isi)
Okpomọkụ na-arụ ọrụ -10°C ruo +50°C

Ntụle nchebe mbata IP30
Iru mmiri 0 ruo 95% iru mmiri, anaghị ekpokọta ọnụ

Nwụnye

Nkwadebe nwụnye

Onye ọrụ tozuru etozu ma ọ bụ ụlọ ọrụ zụrụ azụ ga-arụnye, nyekwa ya ma dokwa ya modul a. A ga-etinyerịrị nrụnye ahụ ka ọ dabara na koodu mpaghara niile nwere ikike na mpaghara gị ma ọ bụ BS 5839 Part 1 na EN54.
Ngwaahịa Norden nwere ụdị ihu dị iche iche, modul interface ọ bụla emebere maka ngwa ngwa akọwapụtara, ọ dị mkpa ịtụle ihe achọrọ n'akụkụ abụọ nke interface ahụ iji zere arụrụ arụ na ụdị mmejọ ahụkarị. Isi ịkpachara anya bụ iji hụ na voltage rating nke akụrụngwa na interface modul bụ dakọtara.

Nwụnye na Wiring

Wụnye ntọala modul interface n'otu ọkọlọtọ [1] igbe azụ eletrik. Soro akara akụ maka ọnọdụ ziri ezi. Ejichala ihe nkedo ahụ nke ọma ma ọ bụghị na ntọala ahụ ga-agbagọ. Jiri skru ọkọlọtọ M4 abụọ.

Jikọọ waya na ọnụ dị ka ihe achọrọ dị ka egosiri na foto abụọ [2] ruo ise [5]. Nyochaa adreesị ngwaọrụ na paramita ndị ọzọ wee rapara na labelụ tupu itinye modul ahụ. Mpempe akwụkwọ mmado dị na ogwe njikwa. Hazie modul interface na taabụ ma jiri nwayọọ na-agbanye ngwaọrụ ahụ ruo mgbe ọ kpọchiri n'ime ya.
Onyonyo 1: I/O Njikwa Module Structure

Nkọwa njedebe

Ịbanye Z1 (+) :D1 Ike Mpụga Na (+)
Ọpụpụ Z1 (+) :D2 Ike Mpụga Na (-)
Ịbanye Z2 (-): D3 Ike Mpụga (+)

Ọpụpụ Z2 (-) :D4 Ọkụ Mpụga (-)
Igwe ntinye ihe RET: COM mmepụta USB
eriri ntinye G :NO, NC mmepụta USB

Foto 2: Ntinye nkọwa Wiring
Mara: Gbanwee ntinye ntinye ihe nlebanya ka ọ bụrụ 3Y (Agbadoro aka)
Foto 3: Nkọwa Wiring Relay (Agbadoro aka) nke a na-ejikarị

Signal	nlekota oru	Mgbe Gbanyụọ (nkịtị)	Mgbe agbanyere (na-arụ ọrụ)
Ntinye	EE (Nhọrọ)	Na-emepe emepe	Na-emechikarị
Mbupute relay	EE	Na-emepe emepe	Na-emechikarị
Mbupute relay	EE	Na-emechikarị	Na-emepe emepe
Ụgwọ nke ụlọ ọrụ Power Limited	EE	+ 1.5-3Vdc	+ 24Vdc

Ntụnye ntinye/mpụta

Signal	Nzaghachi	Nyochaa ntinye	Nyochaa mmepụta
Ntinye	–	3Y (Ee) - dabara na resistor - 4N (Mba) - Ọ dịghị resistor a chọrọ --Ntọala izizi	–
Mbupute relay	1Y (Ee) - Site n'onwe 2N (Mba) - Site na Mpụga - (Rịba ama: n'ihe metụtara mgbama ntinye) Ntọala izizi	–	–
	1Y (Ee) - Site n'onwe	–	5Y(Ee) - Na-elekọta 24VDC
Ụgwọ nke ụlọ ọrụ Power Limited	2N (Mba) - Site na Mpụga -		aga n'ihu - Ntọala izizi
Mpụta	(Rịba ama: n'ihe metụtara Mgbama ntinye) Ntọala izizi		6NMba - Enweghị nlekọta

Nhazi modul interface

Nkwadebe

A na-eji ngwá ọrụ mmemme NFA-T01PT hazie adreesị modul dị nro na paramita interface. Agụnyeghị ngwaọrụ a, a ga-azụrịrị ya iche. Ngwá ọrụ mmemme juputara na batrị 1.5V AA ejima na eriri, dị njikere maka ojiji ozugbo enwetara ya.

Ọ bụ iwu na ndị ọrụ na-enye ọrụ nwere ngwá ọrụ mmemme iji dozie modul na-enye ọnọdụ saịtị na ihe ndị chọrọ gburugburu ebe obibi.
Hazie nọmba adreesị pụrụ iche maka ngwaọrụ ọ bụla dị ka nhazi ọrụ ahụ si dị tupu etinye ya na Terminal Base.
Ịdọ aka ná ntị: Kwupu njikọ akaghị mgbe ị na-ejikọta na ngwa mmemme.

Dee: Na-agwa okwu

Jikọọ eriri mmemme na ọdụ Z1 na Z2 (ọgụgụ 6). Pịa "Ike" ka ịgbanwuo unit.
Gbanwee ngwá ọrụ mmemme, wee pịa bọtịnụ "Dee" ma ọ bụ nọmba "2" ka ịbanye Dee Ad-dress mode (Figure 7).

Tinye uru adreesị ngwaọrụ chọrọ site na 1 ruo 254, wee pịa "Dee" ka ịchekwaa adreesị ọhụrụ (Fig 8).
- Mara: Ọ bụrụ na egosipụtara “Ihe ịga nke ọma”, pụtara ekwenyela na adreesị etinyere. Ọ bụrụ na egosipụtara “ọdịda”, pụtara ọdịda imeghe adreesị ahụ (Foto 9).
Pịa igodo “Wepụ” ka ịlaghachi na isi NchNhr. Pịa igodo “Ike” ka ịgbanyụọ ngwa mmemme.

Ụdị nzaghachi

Ụdị nzaghachi nwere ụdị abụọ, SELF na Mpụga. N'okpuru ọnọdụ nzaghachi SELF, ozugbo modul ihu na-enweta iwu na-arụ ọrụ site na panel ahụ, modul na-eziga ozi nzaghachi na-akpaghị aka na panel njikwa, n'akụkụ ihe ngosi nzaghachi LED na-aga na-agbanye. Ebe ọnọdụ nzaghachi-ex-ternal ga-eme otu ihe ahụ mgbe modul interface chọpụtara mgbama nzaghachi sitere na ọdụ ntinye. Ntọala ndabara bụ ọnọdụ nzaghachi mpụga.
Jikọọ eriri mmemme na ọdụ Z1 na Z2 (ọgụgụ 6). Pịa "Ike" ka ịgbanwuo unit.

Gbanwee ngwa mmemme, wee pịa bọtịnụ “3” ka ịbanye na ọnọdụ nhazi (ọgụgụ 10).
Tinye “1” maka ọnọdụ nzaghachi onwe ma ọ bụ “2” maka ọnọdụ nzaghachi mpụga wee pịa “Dee” ka ịgbanwee ntọala (Fig 11).
- Mara: Ọ bụrụ na egosipụtara “Ihe ịga nke ọma”, pụtara na ekwenyere ọnọdụ etinyere. Ọ bụrụ na ngosipụta “Ada”, pụtara ọdịda imeghe ọnọdụ ahụ.

Pịa igodo “Wepụ” ka ịlaghachi azụ isi NchNhr. Pịa “Ike” ka ịgbanyụọ ngwa mmemme.

Ọnọdụ nlele ntinye

A na-eji ọnọdụ nlele ntinye aka iji mee ka nlele USB ntinye aka, nhọrọ a dị mgbe atọrọ paramita na 3Y nwere njedebe dabara adaba nke resistor ahịrị. Ihe nleba anya modul ga-akọ na panel na ihe omume nke oghere ma ọ bụ nkenke na-eme na wiring.

Ka ịtọọ ọnọdụ nlele. Jikọọ eriri mmemme na ọdụ Z1 na Z2 (ọgụgụ 6). Pịa "Ike" ka ịgbanwuo unit.
Gbanwee ngwa mmemme, wee pịa bọtịnụ “3” ka ịbanye na ọnọdụ nhazi (ọgụgụ 12).
Tinye igodo "3" maka ọnọdụ nlele wee pịa "Dee" ka ịgbanwee ntọala (Fig 13).
- Mara:Ọ bụrụ na egosipụtara “Ihe ịga nke ọma”, pụtara na ekwenyere ọnọdụ etinyere. Ọ bụrụ na ngosipụta “Ada”, pụtara ọdịda imeghe ọnọdụ ahụ.
Pịa igodo “Wepụ” ka ịlaghachi azụ isi NchNhr. Pịa “Ike” ka ịgbanyụọ ngwa mmemme.

Ọnọdụ nlele mmepụta

A na-eji ọnọdụ nlele mmepụta ihe iji mee ka voltage nlekota. Modul ga-akọ na panel na ihe omume nke ala voltage mmepụta mere site na-emeghe na mkpụmkpụ sekit ime na wiring.
Jikọọ eriri mmemme na ọdụ Z1 na Z2 (ọgụgụ 6). Pịa "Ike" ka ịgbanwuo unit.
Gbanwee ngwa mmemme, wee pịa bọtịnụ “3” ka ịbanye na ọnọdụ nhazi (ọgụgụ 14).

Tinye "5" maka ọnọdụ nlele wee pịa "Dee" ka ịgbanwee ntọala (Fig 15).
- Mara: Ọ bụrụ na egosipụtara “Ihe ịga nke ọma”, pụtara na akwadoro ọnọdụ abanyela. Ọ bụrụ na ngosipụta “Ada”, pụtara ọdịda imeghe ọnọdụ ahụ.
Pịa igodo “Wepụ” ka ịlaghachi azụ isi NchNhr. Pịa “Ike” ka ịgbanyụọ ngwa mmemme.

Gụọ nhazi

Jikọọ eriri mmemme na ọdụ Z1 na Z2 (ọgụgụ 6). Pịa "Ike" ka ịgbanwuo unit.
Gbanwee ngwá ọrụ mmemme, wee pịa bọtịnụ "Gụọ" ma ọ bụ "1" ka ịbanye na ọnọdụ Ọgụgụ (Fig 16). Ngwá ọrụ mmemme ga-egosipụta nhazi mgbe sekọnd ole na ole gasịrị. (Foto nke 17).

Pịa igodo “Wepụ” ka ịlaghachi na isi NchNhr. Pịa igodo “Ike” ka ịgbanyụọ ngwa mmemme.

Nlekọta n'ozuzu

Gwa ndị ọrụ kwesịrị ekwesị tupu ịmezi mmezi ahụ.
Gbanyụọ modul interface dị na njikwa njikwa iji gbochie mkpu ụgha.

Anwala ịrụkwa sekit nke modul interface ahụ, ọ nwere ike imetụta ọrụ ịzaghachi ọnọdụ ọkụ na ọ ga-emebi akwụkwọ ikike nke onye nrụpụta.
Jiri mgbasa oziamp ákwà iji hichaa elu.
Gwa ndị ọrụ kwesịrị ekwesị ọzọ mgbe ịmechara mmezi ahụ ma gbaa mbọ hụ na ị na-eme ka modul interface ahụ wee gosi ma ọ na-agba ọsọ.

Mee mmezi ahụ na ọkara afọ ma ọ bụ dabere na ọnọdụ saịtị.

Nchọpụta nsogbu nsogbu

Ihe ị hụrụ	Ihe ọ pụtara	Ihe a ga-eme
Adreesị anaghị edebanye aha	Wiring adịghị Adreesị ahụ bụ nke oyiri	Mee mmezi Nyegharịa ngwaọrụ ahụ
Enweghị ike ịnye ọrụ	Mmebi nke sekit eletrọnịkị	Dochie ngwaọrụ

Ihe odide ntụkwasị

Mmachi modul Interface

Modul Interface enweghị ike ịdịru ruo mgbe ebighị ebi. Iji mee ka modul interface ahụ na-arụ ọrụ n'ọnọdụ dị mma, biko jikwaa akụrụngwa na-aga n'ihu dịka ndụmọdụ sitere n'aka ndị nrụpụta na koodu obodo na iwu obodo siri dị. Were usoro mmezi dị iche iche dabere na mpaghara dị iche iche.

Modul interface a nwere akụkụ eletrọnịkị. Ọ bụ ezie na a na-eme ya ka ọ dị ogologo oge, akụkụ ọ bụla n'ime akụkụ ndị a nwere ike ịdaba n'oge ọ bụla. Ya mere, nwalee modul gị opekata mpe ọkara afọ ọ bụla dabere na koodu ma ọ bụ iwu obodo. Modul interface ọ bụla, ngwaọrụ mkpu ọkụ ma ọ bụ akụkụ ọ bụla nke sistemu ahụ ga-arụzi na/ma ọ bụ dochie ya ozugbo ka ha dara.

ozi ndị ọzọ

Ụgwọ nke ụlọ ọrụ Norden Communication UK Ltd.
Nkeji 10 Baker nso, Oakwood Business Park Clacton-On- Sea, Essex

Koodu nzipu ozi: CO15 4BD
Tel : +44 (0) 2045405070
Email: salesuk@norden.co.uk

www.nordencommunication.com

Ajụjụ

Ajụjụ: Ebee ka m nwere ike ịhụ ozi ndị ọzọ gbasara nchekwa ngwaahịa?
- A: Gaa leta www.nordencommunication.com maka ozi nchekwa ngwaahịa zuru ezu.

Akwụkwọ / akụrụngwa

NORDEN NFA-T01CM Modul njikwa ntinye ntinye enwere ike ịgwa ya [pdf] Ntuziaka nwụnye
NFA-T01CM, NFA-T01CM Module njikwa ntinye ntinye aka, NFA-T01CM, Modul njikwa ntinye ntinye okwu, modul njikwa ntinye ntinye, modul njikwa, modul

Ntụaka

Akwụkwọ ntuziaka onye ọrụ

NFA-T01CM Module njikwa mmepụta ihe enwere ike ịgwa ya

Ozi ngwaahịa

Ntuziaka ojiji ngwaahịa

Nchekwa ngwaahịa