Cov ntsiab lus
zais
NFA-T01CM Addressable Input Output Control Module
Cov ntaub ntawv khoom
Specifications
- Qauv: NFA-T01CM
- Ua raws li: TS EN 54-18: 2005
- Chaw tsim tshuaj paus: Norden Communication UK Ltd liab.
- Chaw Nyob Chaw Nkag Nkag / Tawm Tawm Tswj Module
Cov lus qhia siv khoom
Kev teeb tsa
Ua raws cov theem hauv qab no rau kev teeb tsa kom raug:
Kev npaj kev teeb tsa
Xyuas kom tag nrho cov cuab yeej thiab cov cuab yeej tsim nyog muaj ua ntej pib txheej txheem installation.
Kev teeb tsa thiab kev teeb tsa
Xa mus rau phau ntawv qhia kev teeb tsa kom paub meej cov lus qhia ntawm kev xaim lub module kom raug txhawm rau ua haujlwm kom raug.
Interface Module Configuration
Configure lub interface module raws li cov lus qhia hauv qab no:
Kev npaj
Ua ntej configuration, xyuas kom tseeb tias koj tau nkag mus rau cov ntaub ntawv tsim nyog thiab software.
Sau: Chaw Nyob
Teem qhov chaw nyob tsis raws li qhov yuav tsum tau teev tseg hauv phau ntawv.
Hom kev tawm tswv yim
Qhib hom kev tawm tswv yim kom tau txais cov xwm txheej hloov tshiab los ntawm cov khoom siv txuas nrog.
Nkag mus kuaj hom
Qhib cov tswv yim kos hom los saib xyuas cov teeb liab tawm tswv yim zoo.
Output Check Hom
Siv cov zis kuaj hom los txheeb xyuas qhov ua haujlwm ntawm cov teeb liab tso zis.
Nyeem Configuration
Review thiab txheeb xyuas cov kev teeb tsa tau teeb tsa kom ntseeg tau tias kev ua haujlwm zoo.
Kev Kho Vaj Tse
Tsis tu ncua tshuaj xyuas thiab ntxuav lub module kom tsis txhob muaj plua plav paug thiab ua kom pom kev ua haujlwm zoo.
Cov Lus Qhia Teeb Meem
Xa mus rau ntu kev daws teeb meem hauv phau ntawv qhia kev pab daws teeb meem kev ua haujlwm.
Khoom Kev Nyab Xeeb
- Txhawm rau tiv thaiv kev raug mob hnyav thiab poob ntawm lub neej lossis khoom ntiag tug, nyeem cov lus qhia ua tib zoo ua ntej txhim kho lub module kom paub meej tias kev ua haujlwm zoo thiab nyab xeeb ntawm lub cev.
European Union cov lus qhia:2012/19/EU (WEEE directive): Cov khoom lag luam cim nrog lub cim no tsis tuaj yeem muab pov tseg raws li cov pov tseg hauv nroog tsis muaj nyob hauv European Union. Rau prop-er recycling, xa cov khoom no xa rov qab rau koj lub chaw muag khoom hauv zos thaum yuav cov khoom siv tshiab sib npaug, lossis muab pov tseg ntawm cov ntsiab lus sau tseg.- Yog xav paub ntxiv thov mus saib hauv website ntawm www.recyclethis.info
- EN54 Ntu 18 Kev Ua Raws Cai
- NFA-T01CM Addressable Input/Output Control Module ua raws li cov cai ntawm EN 54-18: 2005.
Taw qhia
Tshajview
- Qhov Chaw Nyob Qhov Chaw Tso Tawm Tawm Tawm Tswj Module ua haujlwm ua ntau yam kev tawm tswv yim / tso tawm relay thiab tswj chav tsev. Feem ntau, nws tau ua haujlwm los hla ntau yam khoom siv, suav nrog kev nqa rov qab, cov tuav lub qhov rooj, cov pa luam yeeb tawm cov kiv cua, cov khoom siv cua tshuab, thiab cov tshuab hluav taws xob pib mus rau lub foob pob hluav taws thiab lub tsev ua haujlwm rau tib neeg (BMS). Tshwj xeeb tshaj yog, qhov module no muaj lub teeb liab tawm tswv yim ua haujlwm. Thaum ib qho kev teeb tsa ua ntej interface module hais kom muaj qhov xwm txheej hluav taws kub, tus tswj lub tswb xa ib qho pib com-mand rau cov khoom siv. Thaum tau txais cov lus txib no, cov zis module qhib nws cov relay, ua rau muaj kev hloov pauv ntawm lub xeev. Tom qab ntawd, thaum lub module nyob rau hauv kev tswj thiab ua hauj lwm, ib tug kev pom zoo teeb liab kis tau rov qab mus rau lub tswb tswj.
- Tsis tas li ntawd, chav tsev suav nrog cov khoom siv ntse ntse uas tau saib xyuas ob qho tib si qhib thiab luv luv hauv cov kab hluav taws xob tawm tswv yim. Chav tsev yog ua tib zoo tsim kom tau raws li cov cai ntawm EN 54 Ntu 18 European Standard. Nws tsim tsis yog tsuas yog aesthetically pleasing tab sis kuj unobtrusive, seamlessly blending nrog niaj hnub build-ing architecture. Lub plug-in sib dhos yooj yim installation thiab txij nkawm, muab kev yooj yim rau installers. Qhov tseem ceeb, chav tsev no tau ua tiav nrog NFA-T04FP Analogue Intelligent Fire Alarm Control Vaj Huam Sib Luag thiab qhov kev sib raug zoo no ua kom muaj kev sib txuas lus tsis sib haum xeeb, tshem tawm cov teeb meem kev sib raug zoo.
Feature thiab Cov txiaj ntsig
- EN54-18 Kev ua raws cai
- Built-in MCU processor thiab digital chaw nyob
- 24VDC / 2A Output relay tiv tauj thiab Tswj module
- Input Fire lossis Supervisory signal configuration
- LED xwm txheej qhia
- Nyob rau hauv Adjustable Parameter
- Loop los yog sab nraud fais fab input
- Aesthetically pleasing design
- Nto mounting nrog txhim kho puag rau yooj yim installation
Technical Specification
- Listed LPCB Daim ntawv pov thawj
- Ua raws EN 54-18: 2005
- Cov lus qhia Voltage Loop zog24VDC [16V txog 28V] Sab Nraud PSU: 20-28VDC
- Tam sim no Consumption Loop: Standby 0.6mA, Tswb: 1.6mA
- Sab nraud PSU: Standby 0.6mA, Tswb: 45mA
- Tswj cov zis voltage 24VDC / 2A ntsuam xyuas
- Input Relay Nquag Qhib kev sib cuag qhuav
- Input Resistance 5.1Kohms / ¼ W
- Raws tu qauv/Nrawm Norden, Tus nqi ntawm 1 txog 254
- Qhov taw qhia qhov xwm txheej ib txwm: Ib ntsais muag / Ua Haujlwm: Steady / Fault: Ob npaug Blink
- Khoom / Xim ABS / Dawb Glossy xov
- Dimension / LWH 108 mm x 86 mm x 38 mm
- Qhov hnyav 170g (nrog Base), 92g (tsis muaj Base)
- Kev khiav hauj lwm kub -10 ° C rau + 50 ° C
- Ingress tiv thaiv ntsuas IP30
- Humidity 0 txog 95% txheeb ze humidity, Tsis condensing
Kev teeb tsa
Kev npaj kev teeb tsa
- Qhov no interface module yuav tsum tau nruab, commissioned thiab tswj los ntawm ib tug tsim nyog los yog Hoobkas cob qhia cov neeg ua hauj lwm. Kev teeb tsa yuav tsum tau teeb tsa ua raws li tag nrho cov cai hauv zos uas muaj kev txiav txim siab hauv koj cheeb tsam lossis BS 5839 Tshooj 1 thiab EN54.
Norden cov khoom lag luam muaj ntau qhov sib cuam tshuam, txhua qhov interface module yog tsim los rau cov ntawv thov tshwj xeeb, nws yog ib qho tseem ceeb uas yuav tsum tau xav txog qhov yuav tsum tau muaj ntawm ob sab ntawm lub interface kom tsis txhob muaj kev ua haujlwm tsis zoo thiab raug teeb meem txhaum cai. Lub ntsiab lus ceeb toom yog xyuas kom meej tias voltage kev ntsuam xyuas ntawm cov khoom siv thiab interface module yog sib xws.
Kev teeb tsa thiab kev teeb tsa
- Mount lub interface module puag ntawm tus qauv ib [1] gang hluav taws xob rov qab lub thawv. Ua raws li tus xub cim rau txoj haujlwm raug. Tsis txhob nruj cov screws txwv tsis pub lub hauv paus yuav twist. Siv ob tus qauv M4 ntsia hlau.
- Txuas cov hlau hauv lub davhlau ya nyob twg raws li qhov yuav tsum tau ua raws li qhia hauv daim duab ob [2] mus rau tsib [5]. Txheeb xyuas qhov chaw nyob ntawm lub cuab yeej thiab lwm yam tsis muaj ces lo rau ntawm daim ntawv lo ua ntej txuas lub module. Cov ntawv nplaum muaj nyob rau ntawm lub vaj huam sib luag tswj. Teem lub interface module thiab tabs thiab maj mam thawb lub cuab yeej kom txog thaum nws xauv rau hauv qhov chaw.
- Daim duab 1: I/O Control Module Structure
Cov lus piav qhia dav dav
- Z1 Teeb liab Hauv (+): D1 Sab Nraud Fais Fab Hauv (+)
- Z1 Tawm Tawm Tawm (+): D2 Sab Nraud Fais Fab Hauv (-)
- Z2 Signal In (-): D3 Sab Nraud Fais Fab Tawm Tawm (+)
- Z2 Tawm Tawm (-): D4 Sab Nraud Fais Fab Tawm Tawm (-)
- RET Input Cable: COM Output Cable
- G Input Cable :Tsis yog, NC Output Cable
- Daim duab 2: Input Wiring Paub meej
- Nco tseg: Hloov cov parameter Input Check rau hauv 3Y (Loop Powered)
- Daim duab 3: Relay Output Wiring Details (Loop Powered) feem ntau yog siv
| Teeb liab | Saib xyuas | Thaum Ntxov (li qub) | Thaum On (active) |
| Tswv yim | YOG (Optional) | Nquag Qhib | Nquag Kaw |
| Relay tso zis | YOG | Nquag Qhib | Nquag Kaw |
| Nquag Kaw | Nquag Qhib | ||
| Fais fab Limited tso zis | YOG | + 1.5-3Vdc | +24 Vdc |
Input/output Parameters
| Teeb liab | Tawm tswv yim | Input Check | Cov ntaub ntawv pov thawj |
|
Tswv yim |
– |
3Y (Yog) - Haum nrog resistor - 4N (Tsis yog) - Tsis xav tau resistor -Default chaw |
– |
|
Relay tso zis |
1Y (Yog) - Los ntawm SELF
2N (Tsis yog) - Los ntawm EXTERNAL - (Faj seeb: nyob rau hauv kev sib raug zoo nrog lub Input teeb liab) Default chaw |
– |
– |
|
1Y (Yog) - Los ntawm SELF |
– |
5Y(Yog) - Saib xyuas 24VDC |
|
| Lub zog txwv | 2N (Tsis yog) - Los ntawm EXTERNAL - | txuas ntxiv - Default chaw | |
| Tso zis | (Faj seeb: nyob rau hauv kev sib raug zoo nrog lub
Input signal) Default chaw |
6N(Tsis muaj) - Tsis muaj kev saib xyuas |
Interface Module Configuration
Kev npaj
- NFA-T01PT Programming cuab yeej yog siv los teeb tsa interface module mos chaw nyob thiab parameter. Cov cuab yeej no tsis suav nrog, yuav tsum tau yuav nyias. Cov cuab yeej programming tau ntim nrog ntxaib 1.5V AA roj teeb thiab cable, npaj rau kev siv ib zaug tau txais.
- Nws yog qhov yuav tsum tau ua rau cov neeg ua haujlwm commissioning kom muaj cov cuab yeej programming txhawm rau kho qhov module sib tham txog qhov xwm txheej ntawm qhov chaw thiab ib puag ncig yuav tsum tau ua.
- Program tus lej chaw nyob tshwj xeeb rau txhua lub cuab yeej raws li qhov project layout ua ntej tso los ntawm Terminal Base.
- Ceeb toom: Disconnect lub voj kev sib txuas thaum txuas mus rau lub programming tool.
Sau: Chaw Nyob
- Txuas lub programming cable rau Z1 thiab Z2 terminals (Daim duab 6). Nias "Power" los hloov lub tsev.
- Hloov-ntawm cov cuab yeej programming, tom qab ntawd nias lub pob "Sau" lossis tus lej "2" txhawm rau nkag mus Sau Hom Kev Sau Npe (Daim duab 7).
- Nkag mus rau qhov chaw nyob tus nqi siab ntawm 1 txog 254, thiab tom qab ntawd nias "Sau" kom txuag tau qhov chaw nyob tshiab (Daim duab 8).
- Nco tseg: Yog tias tso saib "Success", txhais tau tias qhov chaw nkag nkag tau lees paub. Yog tias tso saib "Fail", txhais tau tias tsis ua haujlwm rau qhov chaw nyob (Daim duab 9).
- Nias "Tawm" yuam sij rov qab mus rau Main Menu. Nias "Power" qhov tseem ceeb los hloov-tawm cov cuab yeej programming.
Hom kev tawm tswv yim
- Kev tawm tswv yim muaj ob hom, SELF thiab EXTERNAL. Nyob rau hauv SELF-feedback hom, ib zaug lub inter-face module tau txais active hais kom ua los ntawm lub vaj huam sib luag, lub module cia li xa tawm tswv yim teeb liab mus rau lub tswj vaj huam sib luag, nrog rau cov lus taw qhia LED mus tig-on. Thaum lub Ex-ternal-feedback hom yuav ua zoo ib yam li thaum lub interface module pom lub tswv yim tawm tswv yim teeb liab los ntawm Input davhlau ya nyob twg. Default setting yog Sab nraud-feedback hom.
- Txuas lub programming cable rau Z1 thiab Z2 terminals (Daim duab 6). Nias "Power" los hloov-ntawm chav tsev.
- Hloov-on lub programming cuab tam, ces nias lub pob "3" nkag mus rau Configuration hom (Daim duab 10).
- Nkag mus rau "1" rau hom kev tawm tswv yim rau tus kheej lossis "2" rau sab nraud-feedback hom ces nias "Sau" hloov qhov chaw (Daim duab 11).
- Nco tseg: Yog tias tso saib "Success", txhais tau hais tias hom nkag tau lees paub. Yog tias tso saib "Fail", txhais tau tias tsis ua haujlwm rau qhov kev pab cuam hom.
- Nias "Tawm" yuam sij rov qab mus rau Main Menu. Nias "Power" los hloov lub programming tool.
Nkag mus kuaj hom
- Input Check hom yog siv los pab kom cov input cable xyuas, qhov kev xaiv no muaj nyob rau thaum parameter yog teem rau 3Y nrog haum kawg ntawm kab resistor. Lub module saib yuav qhia rau lub vaj huam sib luag nyob rau hauv cov kev tshwm sim ntawm qhib los yog luv luv Circuit Court tshwm sim nyob rau hauv lub thaiv.
- Txhawm rau teem caij kuaj xyuas hom. Txuas lub programming cable rau Z1 thiab Z2 terminals (Daim duab 6). Nias "Power" los hloov-ntawm chav tsev.
- Hloov-on lub programming cuab tam, ces nias lub pob "3" nkag mus rau Configuration hom (Daim duab 12).
- Nkag mus rau "3" tus yuam sij rau Kev Tshawb Xyuas hom ces nias "Sau" los hloov qhov chaw (Daim duab 13).
- Nco tseg:Yog tias tso saib "Success", txhais tau hais tias hom nkag tau lees paub. Yog tias tso saib "Fail", txhais tau tias tsis ua haujlwm rau qhov kev pab cuam hom.
- Nias "Tawm" yuam sij rov qab mus rau Main Menu. Nias "Power" los hloov lub programming tool.
Output Check Hom
- Output Check hom yog siv los pab voltage saib xyuas. Lub module yuav qhia rau lub vaj huam sib luag nyob rau hauv qhov kev tshwm sim ntawm tsawg voltage tso zis tshwm sim los ntawm qhib thiab luv luv Circuit Court tshwm sim nyob rau hauv cov hlau.
- Txuas lub programming cable rau Z1 thiab Z2 terminals (Daim duab 6). Nias "Power" los hloov-ntawm chav tsev.
- Hloov-on lub programming cuab tam, ces nias lub pob "3" nkag mus rau Configuration hom (Daim duab 14).
- Nkag mus rau "5" rau kev txheeb xyuas hom ces nias "Sau" hloov qhov chaw (Daim duab 15).
- Faj seeb: Yog tias tso saib "Success", txhais tau hais tias hom nkag tau raug lees paub. Yog tias tso saib "Fail", txhais tau tias tsis ua haujlwm rau qhov kev pab cuam hom.
- Nias "Tawm" yuam sij rov qab mus rau Main Menu. Nias "Power" los hloov lub programming tool.
Nyeem Configuration
- Txuas lub programming cable rau Z1 thiab Z2 terminals (Daim duab 6). Nias "Power" los hloov-ntawm chav tsev.
- Hloov-ntawm cov cuab yeej programming, tom qab ntawd nias lub pob "Nyeem" lossis "1" nkag mus rau hom Nyeem (Daim duab 16). Cov cuab yeej programming yuav tso saib qhov teeb tsa tom qab ob peb feeb. (Daim duab 17).
- Nias "Tawm" yuam sij rov qab mus rau Main Menu. Nias "Power" qhov tseem ceeb los hloov lub programming tool.
Kev Kho Vaj Tse
- Qhia rau cov neeg ua haujlwm tsim nyog ua ntej kev saib xyuas.
- Disable lub interface module ntawm lub vaj huam sib luag tswj kom tsis txhob muaj lub tswb cuav.
- Tsis txhob sim kho lub circuitry ntawm lub interface module, nws yuav cuam tshuam rau lub lag luam los teb rau qhov hluav taws kub thiab yuav void lub khw muag khoom warranty.
- Siv adamp daim ntaub los ntxuav qhov chaw.
- Qhia rau cov neeg ua haujlwm kom raug dua tom qab ua qhov kev saib xyuas thiab xyuas kom tseeb tias yuav qhib lub interface module thiab paub meej tias yog nce thiab khiav.
- Ua kev saib xyuas ntawm ib nrab xyoo lossis nyob ntawm qhov chaw nyob.
Cov Lus Qhia Teeb Meem
| Qhov koj pom | Nws txhais li cas | Yuav ua li cas |
| Chaw nyob tsis sau npe | Cov kab hluav taws xob xoob
Qhov chaw nyob yog duplicate |
Ua kev saib xyuas
Re-Commission lub cuab yeej |
| Tsis tuaj yeem ua haujlwm | Kev puas tsuaj ntawm cov hluav taws xob hluav taws xob | Hloov lub cuab yeej |
Cov ntawv ntxiv
Kev txwv ntawm Interface Module
- Lub Interface Module tsis tuaj yeem nyob mus ib txhis. Txhawm rau ua kom lub interface module ua haujlwm zoo, thov tswj cov cuab yeej txuas ntxiv raws li cov lus pom zoo los ntawm cov tuam txhab thiab cov txheeb ze cov cai hauv tebchaws thiab cov cai. Siv cov kev saib xyuas tshwj xeeb raws li qhov sib txawv ntawm ib puag ncig.
- Qhov no interface module muaj cov khoom siv hluav taws xob. Txawm hais tias nws tau ua kom kav ntev ntev, ib qho ntawm cov khoom no tuaj yeem ua tsis tiav txhua lub sijhawm. Yog li ntawd, sim koj lub module yam tsawg kawg ib nrab xyoo ac-cording rau lub teb chaws cov cai los yog txoj cai. Ib qho interface module, hluav taws kub tswb lossis lwm yam khoom ntawm lub cev yuav tsum tau kho thiab / lossis hloov tam sim ntawd thaum lawv ua tsis tiav.
cov ntaub ntawv ntxiv
- Norden Communication UK Ltd liab.
- Chav tsev 10 Baker Close, Oakwood Business Park Clacton-On- Hiav Txwv, Essex
- POST CODE: CO15 4BD
- Xov tooj: +44 (0) 2045405070
- E-mail: salesuk@norden.co.uk
- www.nordencommunication.com
FAQs
- Q: Kuv tuaj yeem nrhiav cov ntaub ntawv ntxiv txog kev nyab xeeb ntawm cov khoom nyob qhov twg?
- A: Mus saib www.nordencommunication.com rau cov ncauj lus kom ntxaws txog kev nyab xeeb ntawm cov khoom.
Cov ntaub ntawv / Cov ntaub ntawv
 |
NORDEN NFA-T01CM Addressable Input Output Control Module [ua pdf] Daim ntawv qhia kev teeb tsa NFA-T01CM, NFA-T01CM Chaw Nyob Qhov Chaw Tso Tawm Tawm Tawm Tswj Module, NFA-T01CM, Chaw Nyob Qhov Chaw Tso Tawm Tawm Tawm Tswj Module, Tawm Tawm Tawm Tawm Tswj Module, Tswj Module, Module |