VORTEX PLUS Nacs To CCS1 Adapter With Interlock
“
Fa'amatalaga o oloa
Fa'amatalaga
- Product Name: Vortex Plus NACS to CCS1 Adapter (with
interlock) - Compatibility: Allows CCS1-enabled electric vehicles to use
NACS DC fast chargers - Usage: For NACS DC fast chargers ONLY
Fa'atonuga o le Fa'aaogaina o Mea
A'o le'i Fa'aaogaina
Ensure that the adapter is in good condition without any visible
damage. Verify that all components are intact and securely
fesootai.
Taimi Totogi
The charging time may vary depending on the vehicle’s battery
capacity and the charger’s power output. Refer to your vehicle
manual for specific charging times.
Fa'afeso'ota'i le Adapter
- Press the NACS unlock button on the adapter and insert the NACS
charger connector until secure. - Plug the adapter into the vehicle’s CCS1 inlet, ensuring a
sootaga saogalemu. - Wait for the interlock pin to engage, indicating a successful
sootaga. - Check your vehicle’s display to confirm charging
amataga.
Mo'ese le feso'ota'iga
- Press the CCS latch on top of the adapter and remove it from
le taavale. - Press the NACS unlock button and disconnect the NACS charger
so'oga. - Store the adapter in a dry, clean place to prevent damage.
Fa'afitauli
If facing issues with charging initiation:
- Ensure DC fast charger supports CCS1 vehicles.
- Check connections at both ends of the adapter.
- Follow the manual for safe unplugging and reconnecting.
- Verify charging status on the charger and vehicle display.
- If problems continue, contact customer support.
FAQ
Q: E mafai ona ou faʻaogaina lenei mea faʻapipiʻi ma soʻo se taavale eletise?
A: No, this adapter is specifically designed for CCS1-enabled
electric vehicles to access NACS DC fast chargers. Ensure
fetaui lelei a'o le'i fa'aogaina.
Q: What should I do if the adapter is damaged?
A: Do not use the adapter if there is any visible damage.
Contact customer support for maintenance or repairs.
“`
TUSI LELEI
VORTEX PLUS
NACS TO CCS1 ADAPTER (WITH INTERLOCK)
ISI
Folasaga ………………………………………………………………………………………………………………………………… ……………………………………………. 2 Fa'atonuga o le Saogalemu ……………………………………………………………………………………………………………………… …………………………………. 2 O le a le mea e aofia ai ……………………………………………………………………………………………………………………… …………………………………. 3 Vaega i lugaview …………………………………………………………………………………………………………………………………………………………………………. 4 Before Use ………………………………………………………………………………………………………………………………………………………………………………….. 5 Charging Time …………………………………………………………………………………………………………………………………………………………………………. 5 Connecting the Vortex Plus ……………………………………………………………………………………………………………………………………………… 6 Disconnecting the Vortex Plus ……………………………………………………………………………………………………………………………………….. 8 Troubleshooting ……………………………………………………………………………………………………………………………………………………………………… 9 Frequently Asked Questions ……………………………………………………………………………………………………………………………………………. 10 Specifications …………………………………………………………………………………………………………………………………………………………………………… 12
FOLASAGA I LE NACS TO
CCS ADAPTER
The Vortex Plus NACS to CCS adapter allows CCS1-enabled electric vehicles to use the North American Charging Standard (NACS) to access NACS DC fast chargers.
LAPATAIGA
Maualuga Voltage – Handle with care and ensure proper connection before use. Caution – Risk of Electric Shock and Fire. Do not use this product if there is any damage to the EV
cable, the vehicle connector, or the vehicle inlet.
FAATONUGA TAU SAOGALEMU
WARNING – When using electric products, basic precautions should always be followed, including the following. This manual contains important instructions for Model LEADPTeslaCCSBLKUSK that shall be followed during use and maintenance of the adapter.
a) Faitau faʻatonuga uma aʻo leʻi faʻaaogaina lenei oloa. e) Aua le tu'u tamatamailima i totonu o le mea fa'apipi'i. i) Aua ne'i fa'aogaina lenei oloa pe afai o le uaea fetu'utu'una'i mea e gaosia, feso'ota'iga ta'avale, ta'avale ta'avale, po'o le mea fa'apipi'i lava e iai.
broken insulation, broken, or cracked housings, or if internal parts are accessible including wiring. d) Do not use this adapter with any charger or EV that is capable of exceeding the adapter’s rated voltage pe
current capacity. Some EVs and EVSE combinations are capable of multiple voltages or limited durations of current overloading designed for normal EVSE to EV connections. Use of the adapter in these situations could result in unsafe conditions such as fire, burns, or exposure of high voltage.
* FAASAO NEI FAATONUGA MO FA'ASAGA I LE LUMAU.
2
For use with NACS DC fast chargers ONLY. NOT suitable for use with:
· Feso'ota'i puipui
· Feso'ota'i Fe'avea'i
· Totogi Fa'asinomaga · So'o se isi fo'i EV chargers
* Fa'aaoga sese e ono i'u ai i le fa'aleagaina ma le saogalemu.
PLEASE READ INSTRUCTIONS CAREFULLY BEFORE USE: · Intended for CCS1 vehicles within the NACS alliance only. Please check with your automaker
for compatibility. · Follow the correct connection and disconnection procedures as prescribed in the user manual. · Do not disconnect during charging. · Protect from water and moisture. · Operate within the temperature range of -22°F to 122°F. · Handle with care and store in a safe location. · Do not clean with detergent. · Do not open or modify the adapter.
Contact Customer Support at contact@ev-lectron.com for usage guidelines, maintenance, or repairs.
O LE MEA E AOFI AI
1 x NACS i le CCS1 Adapter
3
VAEGA OVERVIEW
3
CS
CP
PE
1
1. CCS1 Connector 2. NACS DC Inlet 3. CCS1 Unlock Latch 4. NACS Unlock Button
2 4
4
AE LE'I FAAAOGA
FAAMANATU: Ia mautinoa o loʻo lagolagoina e le Tesla Supercharger le faʻatonuina o le CCS1. LAPATAIGA: Aua ne'i teuina le NACS i le CCS1 Adapter i fafo atu o le vaega o le vevela e teu ai -40°F i le 185°F.
TAIMI TATAU
Charging time varies depending on the NACS DC fast charging station, electric vehicle specifications, environmental conditions, and battery temperature. The NACS to CCS Adapter includes built-in temperature monitoring. Charging power will decrease if the internal components of the adapter exceed 194°F. Operation will shut off if the surface temperature of the adapter reaches 140°F.
5
Faʻafesoʻotaʻi le FUA
To initiate a session through your vehicle’s display or the app, first activate the charging session to unlock the station and then proceed to the steps below.
1. Press the NACS unlock button on the underside of the adapter and insert the NACS charger connector until it clicks into place. Ensure the latch is secure.
2. Plug the adapter into your vehicle’s CCS1 inlet. Verify that the latch is secure.
6
3. Once securely connected to the vehicle, the adapter’s interlock pin will engage, preventing removal of the charger connector until the session is complete.
4. Allow a brief pause for the vehicle and charger to establish communication. Check your vehicle’s display to confirm that charging has started.
7
DISCONNECTING THE ADAPTER
1. When charging is complete, press the CCS latch on top of the adapter and remove it from the vehicle.
2. Press the NACS unlock button on the underside of the adapter and disconnect the NACS charger connector.
3. Store the adapter in a dry, clean, and secure location to protect it from debris and damage.
8
FOFOGAIGA
If the vehicle fails to initiate charging, please consider the following steps: 1. Ensure the DC fast charger supports CCS1 vehicles. 2. Check for firm connections at both the NACS and CCS1 ends of the adapter. 3. Safely unplug following the user manual procedure, then begin the connection process again. 4. Verify the charging status on the NACS DC fast charger and the electric vehicle display. 5. If issues persist, please contact contact@ev-lectron.com
9
FESILI MASANI
F: O fea e mafai ona ou maua ai se lisi o taʻavale e faʻaogaina le Tesla North American Charging Standard (NACS)?
A: Tesla provides a list of supported and upcoming automakers at tesla.com/NACS
Q: O fea nofoaga Supercharger e fetaui ma laʻu taavale?
A: Add your vehicle details to the Tesla app or use Tesla’s interactive map at tesla.com/NACS to see compatible sites.
Q: O le a se mea e mafai ona ou faia pe afai o le vevela tele o le tau e mafua ai le faʻaogaina o mea leaga?
A: Let the charger and adapter cool down for about 30 minutes before retrying. This is a built-in safety feature.
Q: Can I use the Vortex Plus at any Tesla Supercharger?
A: The Vortex Plus is compatible with V3 and V4 Tesla Superchargers. It may
not function at older Superchargers unless updated by Tesla. Use the Tesla app or map at tesla.com/NACS to confirm site compatibility.
Q: How many Supercharger ports will A: Over 23,500 Supercharger stalls support NACS. Check the Tesla app or map
be accessible with the Vortex Plus?
at tesla.com/NACS for compatible locations.
Q: How do I activate a Tesla Supercharger if plug-and-charge isn’t working?
A: Use the Charge Assist app on your vehicle’s onboard settings to manually start charging.
Q: What should I do if the Supercharger cord is too short to reach my EV?
A: End-row chargers offer more space. If needed, occupy two spots and charge during off-peak hours when more chargers are available.
10
Q: Is the Vortex Plus UL certified? Will it be certified by Tesla or OEMs?
A: The Vortex Plus is UL2252 compliant. While we engage with automakers and labs like UL and ETL, Tesla does not currently guarantee third-party adapter compatibility. Contact Tesla for the latest information.
Q: Can I use the Vortex Plus in Canada?
A: Yes, you can use the Vortex Plus in the United States and Canada.
Q: What charging output can I expect A: Tesla Superchargers deliver DC power directly to the battery via the adapter.
with the Vortex Plus?
The Vortex Plus is rated for 500A and 1,000V.
Q: Does Tesla guarantee compatibility with the Vortex Plus?
A: We actively engage with most OEMs and automakers to ensure the compatibility and reliability of the Vortex Plus. Tesla does not guarantee third-party adapter compatibility. For the latest information, please contact Tesla directly.
Q: What safety features does the Vortex Plus have?
A: The Vortex Plus includes locking mechanisms on both the NACS and CCS sides to prevent accidental disconnection.
Q: Can I use the Vortex Plus with Level 2 Tesla Chargers or Mobile Connectors?
A: No, the Lectron Vortex Plus is a DC adapter designed exclusively for safe use with Superchargers only. To charge your EV at Level 2 Tesla Chargers, we recommend our Tesla to J1772 adapter. This adapter is compatible with Tesla High Powered Wall Connectors, Destination Chargers of all generations, and Mobile Connectors.
F: E mafai ea ona ou fa'aogaina le Vortex Plug e fa'aoga ai le tulaga 2 o lo'o molia i Tesla Destination Chargers po'o Feso'ota'i Fe'avea'i?
A: No, the Vortex Plus is designed for Superchargers only. For Level 1 or Level 2 charging, use the Lectron Tesla to J1772 adapter, compatible with Tesla Wall Connectors, Destination Chargers, and Mobile Connectors.
11
FAAMATALAGA
Rated current: Rated input / output: Weatherproof rating: Operating temp: Storage temp: Connector: Inlet: Weight: Materials:
500A DC 1,000V DC IP67 -22°F – 122°F -40°F to 185°F CCS1 NACS 2 lbs PC/PA66/Copper
Disclaimer: The Vortex Plus NACS to CCS adapter is exclusively intended for CCS1-enabled electric vehicles using the North American Charging Standard (NACS) to access NACS DC fast chargers.
12
MAUA FAATASI LE LAGOLAGO
Manaomia se fesoasoani? Mo le tausiga, tautua, po'o le sui, fa'amolemole fa'afeso'ota'i la matou 'au lagolago e ala i le su'eina o le QR code
pe imeli i matou i contact@ev-lectron.com
www.ev-lectron.com Faia i Saina
Pepa / Punaoa
 |
LECTRON VORTEX PLUS Nacs To CCS1 Adapter With Interlock [pdf] Tusi Taiala VORTEX PLUS, VORTEX PLUS Nacs To CCS1 Adapter With Interlock, Nacs To CCS1 Adapter With Interlock, CCS1 Adapter With Interlock, Adapter With Interlock |