ЛЕКТРОН-ЛОГА

LECTRON VORTEX PLUS Nacs To CCS1 Adapter With Interlock

LECTRON-VORTEX-PLUS-Nacs-To-CCS1-Adapter-With-Interlock-PRODUCT

INTRODUCTION TO THE NACS TO CCS ADAPTER

The Vortex Plus NACS to CCS adapter allows CCS1-enabled electric vehicles to use the North American Charging Standard (NACS) to access NACS DC fast chargers.

ПАПЯРЭДЖАННЕ

Высокі кнtage – Звяртайцеся асцярожна і перад выкарыстаннем пераканайцеся, што злучэнне правільнае.
Caution – Risk of Electric Shock and Fire. Do not use this product if there is any damage to the EV cable, the vehicle connector, or the vehicle inlet.

ВАЖНЫЯ ІНСТРУКЦЫІ БЯСПЕКІ

ПАПЯРЭДЖАННЕ – Пры выкарыстанні электрычных вырабаў заўсёды неабходна выконваць асноўныя меры засцярогі, у тым ліку наступныя.
This manual contains important instructions for Model LEADPTeslaCCSBLKUSK that shall be followed during use and maintenance of the adapter.

  • a) Прачытайце ўсе інструкцыі перад выкарыстаннем гэтага прадукта.
  • b) Do not put fingers into the adapter.
  • c) Do not use this product if the flexible output cable, vehicle connector, vehicle inlet, or the adapter itself has broken insulation, broken, or cracked housings, or if internal parts are accessible, including wiring.
  • г) Не выкарыстоўвайце гэты адаптар з зараднай прыладай або электрамабілем, якія могуць перавышаць намінальны аб'ём адаптара.tagабо бягучая ёмістасць. Некаторыя камбінацыі электрамабіляў і EVSE здольныя да некалькіх аб'ёмаўtages or limited durations of current overloading designed for normal EVSE to EV connections. Use of the adapter in these situations could result in unsafe conditions such as fire, burns, or exposure of high voltage.

LECTRON-VORTEX-PLUS-Nacs-To-CCS1-Adapter-With-Interlock-FIG (1)

ПЕРАД ВЫКАРЫСТАННЕМ УВАЖЛІВА ПРАЧЫТАЦЬ ІНСТРУКЦЫЮ:

  • Прызначана толькі для аўтамабіляў CCS1 у рамках альянсу NACS. Калі ласка, пракансультуйцеся з вытворцам вашага аўтамабіля наконт сумяшчальнасці.
  • Выконвайце правільныя працэдуры падключэння і адключэння, прадпісаныя ў кіраўніцтве карыстальніка.
  • Не адключайце падчас зарадкі.
  • Абараняць ад вады і вільгаці.
  • Працуйце ў дыяпазоне тэмператур ад -22°F да 122°F.
  • Асцярожна звяртайцеся і захоўвайце ў бяспечным месцы.
  • Не чысціце мыйнымі сродкамі.
  • Не адкрывайце і не мадыфікуйце адаптар.

Звярніцеся ў службу падтрымкі па адрасе contact@ev-lectron.com для рэкамендацый па выкарыстанні, тэхнічным абслугоўванні або рамонце.

ШТО ЎКЛЮЧАНА

LECTRON-VORTEX-PLUS-Nacs-To-CCS1-Adapter-With-Interlock-FIG (2)

ЧАСТКІ ЗАVIEW

LECTRON-VORTEX-PLUS-Nacs-To-CCS1-Adapter-With-Interlock-FIG (3)

  1. CCS1 Connector
  2. Уваход пастаяннага току NACS
  3. Зашчапка разблакіроўкі CCS1
  4. Кнопка разблакіроўкі NACS

ПЕРАД ВЫКАРЫСТАННЕМ

NOTE: Ensure the Tesla Supercharger supports CCS1 charging.
WARNING: Do not store the NACS to CCS1 Adapter outside of the storage temperature range of -40°F to 185°F.

ЧАС ЗАРАДКІ

Charging time varies depending on the NACS DC fast charging station, electric vehicle specifications, environmental conditions, and battery temperature.
The NACS to CCS Adapter includes built-in temperature monitoring. Charging power will decrease if the internal components of the adapter exceed 194°F. Operation will shut off if the surface temperature of the adapter reaches 140°F.

ПАДключэнне адаптара

To initiate a session through your vehicle’s display or the app, first activate the charging session to unlock the station and then proceed to the steps below.

  1. Press the NACS unlock button on the underside of the adapter and insert the NACS charger connector until it clicks into place. Ensure the latch is secure.
  2. Plug the adapter into your vehicle’s CCS1 inlet. Verify that the latch is secure.LECTRON-VORTEX-PLUS-Nacs-To-CCS1-Adapter-With-Interlock-FIG (4)
  3. Once securely connected to the vehicle, the adapter’s interlock pin will engage, preventing removal of the charger connector until the session is complete.
  4. Allow a brief pause for the vehicle and charger to establish communication. Check your vehicle’s display to confirm that charging has started.LECTRON-VORTEX-PLUS-Nacs-To-CCS1-Adapter-With-Interlock-FIG (5)

DISCONNECTING THE ADAPTER

  1. When charging is complete, press the CCS latch on top of the adapter and remove it from the vehicle.
  2. Press the NACS unlock button on the underside of the adapter and disconnect the NACS charger connector.LECTRON-VORTEX-PLUS-Nacs-To-CCS1-Adapter-With-Interlock-FIG (6)
  3. Store the adapter in a dry, clean, and secure location to protect it from debris and damage.

УСТРАНЕННЕ НЕПАЛАДАК

Калі транспартны сродак не можа пачаць зарадку, выканайце наступныя дзеянні:

  1. Пераканайцеся, што хуткая зарадная прылада пастаяннага току падтрымлівае аўтамабілі CCS1.
  2. Check for firm connections at both the NACS and CCS1 ends of the adapter.
  3. Бяспечна адключыце сетку, выконваючы працэдуру, указаную ў кіраўніцтве карыстальніка, а затым пачніце працэс падлучэння зноўку.
  4. Праверце стан зарадкі на хуткай зараднай прыладзе пастаяннага току NACS і дысплеі электрамабіля.
  5. Калі праблемы не знікнуць, звярніцеся contact@ev-lectron.com

ТЭХНІЧНЫЯ ХАРАКТАРЫСТЫКІ

LECTRON-VORTEX-PLUS-Nacs-To-CCS1-Adapter-With-Interlock-FIG (7)

 

Disclaimer: The Vortex Plus NACS to CCS adapter is exclusively intended for CCS1-enabled electric vehicles using the North American Charging Standard (NACS) to access NACS DC fast chargers.

АТРЫМАЦЬ БОЛЬШ ПАДТРЫМКУ

Патрэбна дапамога?
For maintenance, servicing, or replacements, please contact our support team by scanning the QR codeor emailing us at contact@ev-lectron.comLECTRON-VORTEX-PLUS-Nacs-To-CCS1-Adapter-With-Interlock-FIG (8)

ЧАСТА ЗАДАЮЦЬ ПЫТАННІ

Пытанне: Дзе я магу знайсці спіс аўтавытворцаў, якія выкарыстоўваюць паўночнаамерыканскі стандарт зарадкі Tesla (NACS)?

A: Tesla provides a list of supported and upcoming automakers at tesla.com/NACS

Пытанне: Якія сайты Supercharger сумяшчальныя з маім аўтамабілем?

A: Add your vehicle details to the Tesla app or use Tesla’s interactive map at tesla.com/NACS to see compatible sites.

Пытанне: што я магу зрабіць, калі празмерна цёплае надвор'е выклікае збоі пры зарадцы?

A: Let the charger and adapter cool down for about 30 minutes before retrying. This is a built-in safety feature.

Q: Can I use the Vortex Plus at any Tesla Supercharger?

A: The Vortex Plus is compatible with V3 and V4 Tesla Superchargers. It may not function at older Superchargers unless updated by Tesla. Use the Tesla app or map at tesla.com/NACS to confirm site compatibility.

Q: How many Supercharger ports will be accessible with the Vortex Plus?

A: Over 23,500 Supercharger stalls support NACS. Check the Tesla app or map at tesla.com/NACS for compatible locations

Пытанне: Як актываваць Tesla Supercharger, калі не працуе "падключай і зараджай"?

A: Use the Charge Assist app on your vehicle's onboard settings to manually start charging.

Q: What should I do if the Supercharger cord is too short to reach my EV?

A: End-row chargers offer more space. If needed, occupy two spots and charge during off-peak hours when more chargers are available.

Q: Is the Vortex Plus UL certified? Will it be certified by Tesla or OEMs?

A: The Vortex Plus is UL2252 compliant. While we engage with automakers and labs like UL and ETL, Tesla does not currently guarantee third-party adapter compatibility. Contact Tesla for the latest information

Q: Can I use the Vortex Plus in Canada?

A: Yes, you can use the Vortex Plus in the United States and Canada.

Q: What charging output can I expect with the Vortex Plus?

A: Tesla Superchargers deliver DC power directly to the battery via the adapter. The Vortex Plus is rated for 500A and 1,000V.

Q: Does Tesla guarantee compatibility with the Vortex Plus?

A: We actively engage with most OEMs and automakers to ensure the compatibility and reliability of the Vortex Plus. Tesla does not guarantee third-party adapter compatibility. For the latest information, please contact Tesla directly.

Q: What safety features does the Vortex Plus have?

A: The Vortex Plus includes locking mechanisms on both the NACS and CCS sides to prevent accidental disconnection.

Q: Can I use the Vortex Plus with Level 2 Tesla Chargers or Mobile Connectors?

A: No, the Lectron Vortex Plus is a DC adapter designed exclusively for safe use with Superchargers only. To charge your EV at Level 2 Tesla Chargers, we recommend our Tesla to J1772 adapter. This adapter is compatible with Tesla High Powered Wall Connectors, Destination Chargers of all generations, and Mobile Connectors.

Пытанне: ці змагу я выкарыстоўваць Vortex Plug для доступу да зарадкі ўзроўню 2 на зарадных прыладах Tesla Destination або Mobile Connectors?

A: No, the Vortex Plus is designed for Superchargers only. For Level 1 or Level 2 charging, use the Lectron Tesla to J1772 adapter, compatible with Tesla Wall Connectors, Destination Chargers, and Mobile Connectors

Дакументы / Рэсурсы

LECTRON VORTEX PLUS Nacs To CCS1 Adapter With Interlock [pdfКіраўніцтва карыстальніка
VORTEX PLUS, VORTEX PLUS Nacs To CCS1 Adapter With Interlock, Nacs To CCS1 Adapter With Interlock, CCS1 Adapter With Interlock, Adapter With Interlock

Спасылкі

Пакінуць каментар

Ваш электронны адрас не будзе апублікаваны. Абавязковыя для запаўнення палі пазначаны *