VORTEX PLUS Nacs To CCS1 Adapter With Interlock
“
Fiosrachadh toraidh
Sònrachaidhean
- Product Name: Vortex Plus NACS to CCS1 Adapter (with
interlock) - Compatibility: Allows CCS1-enabled electric vehicles to use
NACS DC fast chargers - Usage: For NACS DC fast chargers ONLY
Stiùireadh airson cleachdadh bathar
Mus tèid a chleachdadh
Ensure that the adapter is in good condition without any visible
damage. Verify that all components are intact and securely
ceangailte.
Ùine cosgais
The charging time may vary depending on the vehicle’s battery
capacity and the charger’s power output. Refer to your vehicle
manual for specific charging times.
A 'ceangal an Adapter
- Press the NACS unlock button on the adapter and insert the NACS
charger connector until secure. - Plug the adapter into the vehicle’s CCS1 inlet, ensuring a
ceangal tèarainte. - Wait for the interlock pin to engage, indicating a successful
ceangal. - Check your vehicle’s display to confirm charging
tòiseachadh.
Dì-cheangal an Adapter
- Press the CCS latch on top of the adapter and remove it from
an carbad. - Press the NACS unlock button and disconnect the NACS charger
ceanglaiche. - Store the adapter in a dry, clean place to prevent damage.
Fuasgladh thrioblaidean
If facing issues with charging initiation:
- Ensure DC fast charger supports CCS1 vehicles.
- Check connections at both ends of the adapter.
- Follow the manual for safe unplugging and reconnecting.
- Verify charging status on the charger and vehicle display.
- If problems continue, contact customer support.
Ceistean Cumanta
C: An urrainn dhomh an inneal-atharrachaidh seo a chleachdadh le carbad dealain sam bith?
A: No, this adapter is specifically designed for CCS1-enabled
electric vehicles to access NACS DC fast chargers. Ensure
co-chòrdalachd mus tèid a chleachdadh.
Q: What should I do if the adapter is damaged?
A: Do not use the adapter if there is any visible damage.
Contact customer support for maintenance or repairs.
“`
LÀRR-CHUNNTAS CLEACHDADH
VORTEX PLUS
NACS TO CCS1 ADAPTER (WITH INTERLOCK)
CLAR-INNSIDH
Ro-ràdh …………………………………………………………………………………………………………………………… ………………………………………………………. 2 Stiùireadh Sàbhailteachd ……………………………………………………………………………………… ……………………………………. 2 Na tha air a ghabhail a-steach …………………………………………………………………………………………………………………………… …………………………………………. 3 Pàirtean thairisview …………………………………………………………………………………………………………………………………………………………………………. 4 Before Use ………………………………………………………………………………………………………………………………………………………………………………….. 5 Charging Time …………………………………………………………………………………………………………………………………………………………………………. 5 Connecting the Vortex Plus ……………………………………………………………………………………………………………………………………………… 6 Disconnecting the Vortex Plus ……………………………………………………………………………………………………………………………………….. 8 Troubleshooting ……………………………………………………………………………………………………………………………………………………………………… 9 Frequently Asked Questions ……………………………………………………………………………………………………………………………………………. 10 Specifications …………………………………………………………………………………………………………………………………………………………………………… 12
RO-RÀDH DO NACS GU
ADAPTAR CCS
The Vortex Plus NACS to CCS adapter allows CCS1-enabled electric vehicles to use the North American Charging Standard (NACS) to access NACS DC fast chargers.
RABHADH
Àrd Voltage – Handle with care and ensure proper connection before use. Caution – Risk of Electric Shock and Fire. Do not use this product if there is any damage to the EV
cable, the vehicle connector, or the vehicle inlet.
STIÙIREADH SÀBHAILTEACHD CUDROMACH
WARNING – When using electric products, basic precautions should always be followed, including the following. This manual contains important instructions for Model LEADPTeslaCCSBLKUSK that shall be followed during use and maintenance of the adapter.
a) Leugh a h-uile stiùireadh mus cleachd thu an toradh seo. b) Na cuir corragan a-steach don inneal-atharrachaidh. c) Na cleachd an toradh seo ma tha an càball toraidh sùbailte, an ceangal carbaid, a-steach carbaid, no an inneal-atharrachaidh fhèin
broken insulation, broken, or cracked housings, or if internal parts are accessible including wiring. d) Do not use this adapter with any charger or EV that is capable of exceeding the adapter’s rated voltage neo
current capacity. Some EVs and EVSE combinations are capable of multiple voltages or limited durations of current overloading designed for normal EVSE to EV connections. Use of the adapter in these situations could result in unsafe conditions such as fire, burns, or exposure of high voltage.
*Sàbhail na stiùiridhean seo AIRSON AITHISG RI TEACHD.
2
For use with NACS DC fast chargers ONLY. NOT suitable for use with:
· Ceangalaichean balla
· Luchd-ceangail gluasadach
· Luchd-cìse Ceann-uidhe · Cargairean EV sam bith eile
* Faodaidh mì-chleachdadh leantainn gu milleadh agus cunnartan sàbhailteachd.
PLEASE READ INSTRUCTIONS CAREFULLY BEFORE USE: · Intended for CCS1 vehicles within the NACS alliance only. Please check with your automaker
for compatibility. · Follow the correct connection and disconnection procedures as prescribed in the user manual. · Do not disconnect during charging. · Protect from water and moisture. · Operate within the temperature range of -22°F to 122°F. · Handle with care and store in a safe location. · Do not clean with detergent. · Do not open or modify the adapter.
Contact Customer Support at contact@ev-lectron.com for usage guidelines, maintenance, or repairs.
DÈ A THA A THA A 'GABHAIL A-STEACH
1 x NACS gu CCS1 Adapter
3
PÀIRT A-NISVIEW
3
CS
CP
PE
1
1. CCS1 Connector 2. NACS DC Inlet 3. CCS1 Unlock Latch 4. NACS Unlock Button
2 4
4
AIRSON CLEACHDADH
NOTA: Dèan cinnteach gu bheil an Tesla Supercharger a’ toirt taic do chìsean CCS1. RABHADH: Na stòraich an NACS gu CCS1 Adapter taobh a-muigh an raon teòthachd stòraidh de -40 ° F gu 185 ° F.
AM FEAR-CIUIL
Charging time varies depending on the NACS DC fast charging station, electric vehicle specifications, environmental conditions, and battery temperature. The NACS to CCS Adapter includes built-in temperature monitoring. Charging power will decrease if the internal components of the adapter exceed 194°F. Operation will shut off if the surface temperature of the adapter reaches 140°F.
5
A ’ceangal ris an ADAPTER
To initiate a session through your vehicle’s display or the app, first activate the charging session to unlock the station and then proceed to the steps below.
1. Press the NACS unlock button on the underside of the adapter and insert the NACS charger connector until it clicks into place. Ensure the latch is secure.
2. Plug the adapter into your vehicle’s CCS1 inlet. Verify that the latch is secure.
6
3. Once securely connected to the vehicle, the adapter’s interlock pin will engage, preventing removal of the charger connector until the session is complete.
4. Allow a brief pause for the vehicle and charger to establish communication. Check your vehicle’s display to confirm that charging has started.
7
DISCONNECTING THE ADAPTER
1. When charging is complete, press the CCS latch on top of the adapter and remove it from the vehicle.
2. Press the NACS unlock button on the underside of the adapter and disconnect the NACS charger connector.
3. Store the adapter in a dry, clean, and secure location to protect it from debris and damage.
8
TREASGACHADH
If the vehicle fails to initiate charging, please consider the following steps: 1. Ensure the DC fast charger supports CCS1 vehicles. 2. Check for firm connections at both the NACS and CCS1 ends of the adapter. 3. Safely unplug following the user manual procedure, then begin the connection process again. 4. Verify the charging status on the NACS DC fast charger and the electric vehicle display. 5. If issues persist, please contact contact@ev-lectron.com
9
CEISTEAN AIR FHAIGHEADH
C: Càite am faigh mi liosta de luchd-dèanaidh chàraichean a bhios a’ cleachdadh Inbhe Cìsean Ameireagaidh a Tuath Tesla (NACS)?
A: Tesla provides a list of supported and upcoming automakers at tesla.com/NACS
C: Dè na làraich Supercharger a tha co-chòrdail ris a ’charbad agam?
A: Add your vehicle details to the Tesla app or use Tesla’s interactive map at tesla.com/NACS to see compatible sites.
C: Dè as urrainn dhomh a dhèanamh ma tha sìde ro bhlàth ag adhbhrachadh sgàinidhean cosgais?
A: Let the charger and adapter cool down for about 30 minutes before retrying. This is a built-in safety feature.
Q: Can I use the Vortex Plus at any Tesla Supercharger?
A: The Vortex Plus is compatible with V3 and V4 Tesla Superchargers. It may
not function at older Superchargers unless updated by Tesla. Use the Tesla app or map at tesla.com/NACS to confirm site compatibility.
Q: How many Supercharger ports will A: Over 23,500 Supercharger stalls support NACS. Check the Tesla app or map
be accessible with the Vortex Plus?
at tesla.com/NACS for compatible locations.
Q: How do I activate a Tesla Supercharger if plug-and-charge isn’t working?
A: Use the Charge Assist app on your vehicle’s onboard settings to manually start charging.
Q: What should I do if the Supercharger cord is too short to reach my EV?
A: End-row chargers offer more space. If needed, occupy two spots and charge during off-peak hours when more chargers are available.
10
Q: Is the Vortex Plus UL certified? Will it be certified by Tesla or OEMs?
A: The Vortex Plus is UL2252 compliant. While we engage with automakers and labs like UL and ETL, Tesla does not currently guarantee third-party adapter compatibility. Contact Tesla for the latest information.
Q: Can I use the Vortex Plus in Canada?
A: Yes, you can use the Vortex Plus in the United States and Canada.
Q: What charging output can I expect A: Tesla Superchargers deliver DC power directly to the battery via the adapter.
with the Vortex Plus?
The Vortex Plus is rated for 500A and 1,000V.
Q: Does Tesla guarantee compatibility with the Vortex Plus?
A: We actively engage with most OEMs and automakers to ensure the compatibility and reliability of the Vortex Plus. Tesla does not guarantee third-party adapter compatibility. For the latest information, please contact Tesla directly.
Q: What safety features does the Vortex Plus have?
A: The Vortex Plus includes locking mechanisms on both the NACS and CCS sides to prevent accidental disconnection.
Q: Can I use the Vortex Plus with Level 2 Tesla Chargers or Mobile Connectors?
A: No, the Lectron Vortex Plus is a DC adapter designed exclusively for safe use with Superchargers only. To charge your EV at Level 2 Tesla Chargers, we recommend our Tesla to J1772 adapter. This adapter is compatible with Tesla High Powered Wall Connectors, Destination Chargers of all generations, and Mobile Connectors.
C: Am bi e comasach dhomh am Plug Vortex a chleachdadh gus faighinn gu cosgais ìre 2 aig Tesla Destination Chargers no Mobile Connectors?
A: No, the Vortex Plus is designed for Superchargers only. For Level 1 or Level 2 charging, use the Lectron Tesla to J1772 adapter, compatible with Tesla Wall Connectors, Destination Chargers, and Mobile Connectors.
11
Sònrachaidhean
Rated current: Rated input / output: Weatherproof rating: Operating temp: Storage temp: Connector: Inlet: Weight: Materials:
500A DC 1,000V DC IP67 -22°F – 122°F -40°F to 185°F CCS1 NACS 2 lbs PC/PA66/Copper
Disclaimer: The Vortex Plus NACS to CCS adapter is exclusively intended for CCS1-enabled electric vehicles using the North American Charging Standard (NACS) to access NACS DC fast chargers.
12
FAIGH TUILLEADH TAIC
Feum air cuideachadh? Airson cumail suas, seirbheiseachadh no feadhainn eile, cuir fios chun sgioba taic againn le bhith a’ sganadh a’ chòd QR
no cuir post-d thugainn aig contact@ev-lectron.com
www.ev-lectron.com Dèanta ann an Sìona
Sgrìobhainnean/Goireasan
 |
LECTRON VORTEX PLUS Nacs To CCS1 Adapter With Interlock [pdfLeabhar-làimhe an neach-cleachdaidh VORTEX PLUS, VORTEX PLUS Nacs To CCS1 Adapter With Interlock, Nacs To CCS1 Adapter With Interlock, CCS1 Adapter With Interlock, Adapter With Interlock |