ICON Process Controls DO3000-C Series Dissolved Oxygen Controller User Guide

O le DO3000 Dissolved Oxygen sensor e fa'aogaina ai le fa'alili
tineia tekinolosi e faaliliu ai faailoilo opitika i le eletise
faailoilo, saunia mautu le okesene fa'atonu faitau fa'atasi ma a
fa'atupuina e le tagata lava ia algorithm 3D.

Ole Dissolved Oxygen Controller ose vai fa'avae microprocessor
tulaga lelei luga o le initoneti mataituina meafaigaluega pulea lautele faaaogaina i eseese
fa'aoga e pei ole vai inu vai, fa'asoa
feso'ota'iga, vaita'ele, galuega fa'amama vai, otaota
togafitiga, fa'amama vai, ma faiga fa'apisinisi.

Fa'atonuga fa'apipi'i

Fa'apipi'iina

a) Faʻamau i totonu o se pu matala

e) Fa'asa'o le meafaigaluega e fa'aaoga ai metotia ua saunia

Fa'apipi'iina o puipui

a) Faʻapipiʻi se faʻamau faʻapipiʻi mo le meafaigaluega

e) Fa'amautu le mea faigaluega e fa'aoga ai le fa'amauina o sikulima puipui

Fa'atonuga uaea

Terminal	Fa'amatalaga
V+, V-, A1, B1	Fa'afuainumera Input Channel 1
V+, V-, A2, B2	Fa'afuainumera Input Channel 2
I1, G, I2	Fa'aoso i le taimi nei
A3, B3	RS485 Feso'ota'iga Galuega
G, TX, RX	RS232 Feso'ota'iga Galuega
P+, P-	DC Paoa sapalai
T2+, T2-	So'oga Uaea Temp
EC1, EC2, EC3, EC4	Feso'ota'iga Uea EC/RES
RLY3, RLY2, RLY1	Vaega 3 Relay
L, N,	L- Uaea Ola \| N- E le faaituau \| eleele
REF1	[Faamatalaga o le REF1 terminal]

Fesili e Fai soo (FAQ)

Q: O le a le mea e tatau ona ou faia pe a faʻaalia e le masini se feʻau sese?

A: Afai e faʻaalia e le masini se feʻau sese, faʻafesoʻotaʻi le tagata faʻaoga
tusi lesona mo laasaga e foia ai faafitauli. Afai e fa'aauau pea le fa'afitauli, fa'afeso'ota'i
lagolago tagata faatau mo fesoasoani.

Q: O le a le tele o taimi e tatau ai ona faʻavasega le masini?

A: E tatau ona calibrated le sensor e tusa ai ma le
fautuaga a le gaosiga po'o pei ona fa'aalia i totonu o le tusi fa'aoga.
O le fa'avasegaina masani e mautinoa ai le sa'o o faitauga.

Q: E mafai ona faʻaogaina lenei pule ile siosiomaga i fafo?

A: Ua mamanuina le pule mo le faʻaogaina i totonu. Aloese mai le fa'aalia
i tulaga ogaoga o le tau poʻo le susulu o le la e puipuia ai
fa'aleagaina.

“`

View Fullscreen

ProCon® — DO3000-C Fa'asologa
Pule o le Okesene Fa'amavae
Vave Amata Tusi Lesona

Faitau ma le faaeteete le tusi lesona a le tagata faaaoga a'o le'i amata ona faaaoga le iunite. O lo'o fa'apolopolo le aia tatau e fa'atino ai suiga e aunoa ma se fa'aaliga muamua.

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Fa'asologa
Pule o le Okesene Fa'amavae

Fa'amatalaga Saogalemu
Fa'amama ma le fa'aalili faiga a'o le'i fa'apipi'i po'o le aveeseina Fa'amaonia le fetaui lelei o vaila'au a'o le'i fa'aoga AUA LE sili atu i le maualuga o le vevela po'o fa'amatalaga o le mamafa.

Lapataiga | Lapataiga | Mata'utia
Fa'ailoa mai se tulaga lamatia. O le le mulimuli i lapataiga uma e ono i'u ai i le faaleagaina o meafaigaluega, po o le toilalo, manu'a, po o le oti.

Fa'aaliga | Fa'amatalaga Fa'atekinisi
Fa'amanino fa'amatalaga fa'aopoopo po'o fa'agaioiga au'ili'ili.

Fa'aaogāina Fa'amoemoe
Pe a mauaina le mea faigaluega, faʻamolemole tatala le afifi ma le faʻaeteete, siaki pe faʻaleagaina mea faigaluega ma mea faʻaoga e ala i felauaiga ma pe ua maeʻa mea faʻaoga. Afai e maua ni fa'aletonu, fa'amolemole fa'afeso'ota'i le matou matagaluega pe a uma ona fa'atau atu po'o le nofoaga tutotonu o auaunaga fa'aitulagi, ma teu le afifi mo le toe fa'afo'i atu. O fa'amatalaga fa'atekinisi o lo'o lisiina i le pepa fa'amaumauga o lo'o iai nei o lo'o fa'aogaina ma e tatau ona usita'ia. Afai e le o maua le pepa faʻamatalaga, faʻamolemole oka pe download mai le matou itulau (www.iconprocon.com).
Tagata faigaluega mo Fa'apipi'i, Fa'atonu, ma Fa'agaioiga
O lenei mea faigaluega o se fua fa'atatau ma fa'atonu mea faigaluega ma le sa'o lelei. Na'o le tagata poto, fa'aa'oa'oina pe fa'atagaina e tatau ona fa'atinoina le fa'apipi'iina, fa'atulagaina ma le fa'agaoioia o le meafaigaluega. Ia mautinoa o le uaea eletise e vavae ese mai le eletise pe a fesoʻotaʻi pe toe faʻaleleia. O le taimi lava e tupu ai le faʻafitauli saogalemu, ia mautinoa ua pe le paoa o le meafaigaluega ma motusia. Mo example, e ono le saogalemu pe a tula'i mai tulaga nei: 1. Fa'aleagaina foliga o le su'esu'e 2. E le lelei le galue o le su'esu'e pe saunia fua fa'atatau. 3. Ua teuina le suʻesuʻe mo se taimi umi i se siosiomaga e sili atu le vevela i le 70 °C.
E tatau ona faʻapipiʻi le suʻesuʻega e tagata tomai faapitoa e tusa ai ma faʻamatalaga faʻapitonuʻu talafeagai, ma faʻatonuga o loʻo aofia i totonu o le tusi lesona.
Fa'amalieina fa'amatalaga fa'atekinisi ma mana'oga fa'aoga a le su'esu'e.
Fa'amatalaga o oloa
O le DO3000 Dissolved Oxygen sensor e fa'aogaina le tekonolosi fa'amalo e fa'aliliu ai fa'ailoga mata i fa'ailoga eletise. E tu'uina atu faitau fa'amautu o le okesene fa'atasi ma se algorithm 3D na fa'avaeina e le tagata lava ia.
O le Dissolved Oxygen Controller ose masini fa'apipi'i fa'avae vai fa'atatau i luga ole laiga e mata'ituina ai. E masani ona faʻaaogaina i vai inu vai togafitiga, fesoʻotaʻiga tufatufaina vai inu, vaitaele, galuega faʻaleleia vai, faʻamaʻi otaota, faʻamaʻi vai ma isi gaioiga faʻapisinisi.

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Fa'asologa
Pule o le Okesene Fa'amavae

Fa'amatalaga Fa'apitoa

Fuafuaga Va'aiga Fua Fa'aituuga Fa'aituuga Fa'aituuga Fa'asagaga Fa'asagaga Fa'asagaga Fa'asagaga Ve'a Ve'a Ve'a Fa'amalie Fa'asagaga Fa'asagaga Fa'asagaga o lo'o i le taimi nei Feso'ota'iga Fa'afeso'ota'i Tolu Relay Pulea Fa'afeso'ota'i Tulaga Malosiaga Galulue Va'aiga Susū Susū Fa'ailoga Fua Fua Fa'apipi'i Laise Tatala Fa'apipi'i Metotia Fa'apipi'i.

0.005~20.00mg/L | 0.005~20.00ppm Fluorescence 0.001mg/L | 0.001ppm ±1% FS 14 ~ 302ºF | -10 ~ 150.0oC (Faʻalagolago ile Sensor) 0.1°C ±0.3°C pH: 0.01pH/24h; ORP: 1mV / 24h 2 vaega: 4-20mA RS485 MODBUS RTU Faʻamaumauga Faʻamaumauga & Faʻaaliga Curve 5A 250VAC, 5A 30VDC 9~36VDC | 85~265VAC | Fa'aaogāina Malosiaga 3W Leai se fa'alavelave malosi fa'amaneta fa'ata'amilo se'i vaganā ai le fanua fa'amaneta 14 ~ 140oF | -10~60°C 90% IP65 0.8kg 144 x 114 x 118mm 138 x 138mm Panel | Mauga puipui | Paipa

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Fa'asologa
Pule o le Okesene Fa'amavae
Fua
144mm

118mm

26mm

136mm

144mm

Mea Fa'ameamea M4x4 45x45mm
Lapo'a Fa'amau i tua 24-0585 © Icon Process Controls Ltd.

138mm +0.5mm Fa'apipi'i Fa'apipi'i Otioti Tele
4

138mm +0.5mm

ProCon® — DO3000-C Fa'asologa
Pule o le Okesene Fa'amavae
Fa'apipi'iina

D+ DB2

a) Fa'amau i totonu o se pu matala e) Fa'amau le meafaigaluega

relay A relay B relay C

Fuafuaga o le Maea o le Fa'apipi'i
Fa'apipi'iina o puipui

150.3mm 6×1.5mm

58.1mm

Fuafuaga o le Maea o le Fa'apipi'i
a) Fa'apipi'i se fa'amau fa'apipi'i mo le meafaifa'aili e) Fa'apipi'i sikulima puipui

Luga view of mounting bracket Fa'alogo lelei ile fa'apipi'i

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Fa'asologa
Pule o le Okesene Fa'amavae
Uaea

REF2 INPUT2 TEMP2 TEMP2
GND CE RE TATOU

V+ V- A1 B1 V+ V- A2 B2 I1 G I2 A3 B3 G TX RX P+ P-
T2+ T2- EC1 EC2 EC3 EC4 RLY3 RLY2 RLY1 LN

SEN+ SENTEMP1 TEMP1 INPUT1 REF1

Terminal

Fa'amatalaga

V+, V-, A1, B1

Fa'afuainumera Input Channel 1

V+, V-, A2, B2

Fa'afuainumera Input Channel 2

I1, G, I2

Fa'aoso i le taimi nei

A3, B3

RS485 Feso'ota'iga Galuega

G, TX, RX

RS232 Feso'ota'iga Galuega

P+, P-

DC Paoa sapalai

T2+, T2-

So'oga Uaea Temp

EC1,EC2,EC3,EC4

Feso'ota'iga Uea EC/RES

RLY3,RLY2,RLY1

Vaega 3 Relay

L,N,

L- Uaea Ola | N- E le faaituau | eleele

Terminal REF1
INPUT 1 TEMP 1 SEN-, SEN+ REF2 INPUT 2 TEMP 2
GND CE, RE, TATOU

Fa'amatalaga pH/Ion Reference 1 pH/Ion Measurement 1
Temp 2 Membrane DO/FCL
pH Fa'asinomaga 2 pH Fua 2
Temp 2 Eleele (mo le su'ega) Constant Voltage mo FCL/CLO2/O3

Le fesoʻotaʻiga i le va o le meafaifaʻaili ma le masini: o le eletise, faʻailoga o le gaosiga, fesoʻotaʻiga faʻailo faʻasalalau ma le fesoʻotaʻiga i le va o le masini ma le meafaigaluega o loʻo i totonu uma o le meafaigaluega, ma o le uaea e pei ona faʻaalia i luga. O le umi o le uaea taʻitaʻia e faʻapipiʻiina e le eletise e masani lava 5-10 mita, faʻapipiʻi le laina faʻatasi ma le igoa poʻo le lanu lanu i luga o le masini i totonu o le mea faʻapipiʻi i totonu o le meafaigaluega ma faʻamau.

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Fa'asologa
Pule o le Okesene Fa'amavae
Faʻamatalaga Keypad

2024-02-12 12:53:17

25.0 °C

Electromagnetic Conductivity Meter

Faiga Fa'atulagaina o Menu: Oomi le ki lenei e fa'asolo i lalo le lisi o filifiliga
Fa'avasegaina: Siaki le Tulaga Fa'atonu Toe fa'a'au'au: Toe lolomi le "ENT".

Filifiliga Faamaonia

Ulufale Fa'ata'ita'iga Fa'ata'ita'iga Fa'atonu

Faiga Fa'atulagaina o Menu: Oomi le ki lenei i
fesuia'i mea'ai filifiliga

Ulufale Menu Seti Faiga | Fua Fa'afoi | Lua Faiga Suiga

Toe fo'i ile Menu muamua

I le Fua Fa'atatau, Oomi le faamau lea e fa'aali ai le Siata o le Trend

? Puupuu Press: Puupuu Press o lona uiga e tatala loa le ki pe a uma ona oomi. (Fa'aleaogaina i omiga pu'upu'u pe a le aofia i lalo)
? Lomi Umi: Oomi le faamau mo le 3 sekone ona tatala lea.

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Fa'asologa
Pule o le Okesene Fa'amavae

Fa'aaliga Fa'amatalaga

O feso'ota'iga paipa uma ma feso'ota'iga eletise e tatau ona siaki a'o le'i fa'aogaina. A uma ona ki le paoa, o le mita o le a faʻaalia e faʻapea.

Taua Autu

Aso Tausaga | Masina | Aso
Taimi Itula | minute | Sekona

Fa'aliga fa'aletonu ole Feso'ota'iga Electrode

O le Persenetage fetaui ma le fua a le Peraimeri
Me'a 1 (O lo'o pe le lanumoana ma o lo'o mū Mumu)

Fluorescence Dissolved Oxygen

Me'a 2 (O lo'o pe le lanumoana ma o lo'o mū Mumu)
Ituaiga Meafaigaluega
Me'a 3 (O lo'o pe le lanumoana ma o lo'o mū Mumu)

Fa'aaliga Su'i 1 Le taimi nei 2
Fa'amamaina

vevela
Taui o le vevela otometi

Fua Faiga

Seti Faiga

Fluorescence Dissolved Oxygen
Faiga Fa'avasega

Fa'atulaga Fa'atonu Fa'atonu Fa'ailoga Fa'asologa o Fa'amaumauga Fa'amaumauga
Fluorescence Dissolved Oxygen
Fa'aaliga Siata Fa'asologa

Ea 8.25 mg/L

Fa'avasegaina

Fluorescence Dissolved Oxygen
24-0585 © Icon Process Controls Ltd.

Fluorescence Dissolved Oxygen
8

ProCon® — DO3000-C Fa'asologa
Pule o le Okesene Fa'amavae

Lisi Faʻatulagaina
O lo'o ta'ua i lalo le fa'atulagaina o lisi o lenei mea faigaluega

Vaega

mg/L %

Totogi Taui 101.3

Fa'atonu le fa'avasegaina

Sensori
Temperature Fa'ata'otoga Fa'avasegaina
Faʻatulagaina o Fanua

Taui Salinity

Zero Okesene Voltagu Taui

100mV

Saturation Oxygen Voltagu Taui

400mV

Saturation Oxygen Taui

8.25

Temperature Sensor
Temperature Offset Temperature Input Temperature Unit
Zero Calibration Air Calibration
Fa'asa'oga
Field Calibration Offset Fetuuna'iga Fa'ata'otoga

NTC2.252 k NTC10 k Pt 100 Pt 1000 0.0000 Tusi Lesona Otometi oC oF
Fa'asa'o Fa'asa'o 1 Fa'asa'oga Fa'asa'o 2 Fa'asa'oga Fa'asa'o 1 Fa'asa'oga Fa'asa'e 2

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Fa'asologa
Pule o le Okesene Fa'amavae

Moligafua 1

Alalaga

Moligafua 2

Moligafua 3

Tuuina atu

Taimi 1 Taimi nei 2

24-0585 © Icon Process Controls Ltd.

Malo-Pese Setete

I LE PULE

Alalaga maualuga

Fa'ailoa le Ituaiga Fa'aliga Maualalo

Mama

Fa'atapula'a Fa'atonu
(Taimi Tatala – Tulaga Fa'amama)

Taimi Tatala Fa'aauau

Lag

Le va i le va o le tatalaina mulimuli ma le tapunia

(Taimi Taimi - I le Faʻamamaina o le Setete) ma le isi avanoa

Malo-Pese Setete

I LE PULE

Alalaga maualuga

Fa'ailoa le Ituaiga Fa'aliga Maualalo

Mama

Fa'atapula'a Fa'atonu
(Taimi Tatala – Tulaga Fa'amama)

Taimi Tatala Fa'aauau

Lag

Le va i le va o le tatalaina mulimuli ma le tapunia

(Taimi Taimi - I le Faʻamamaina o le Setete) ma le isi avanoa

Malo-Pese Setete

I LE PULE

Alalaga maualuga

Fa'ailoa le Ituaiga Fa'aliga Maualalo

Mama

Fa'atapula'a Fa'atonu
(Taimi Tatala – Tulaga Fa'amama)

Taimi Tatala Fa'aauau

Lag

Le va i le va o le tatalaina mulimuli ma le tapunia

(Taimi Taimi - I le Faʻamamaina o le Setete) ma le isi avanoa

Auala

Temperature Autu

4-20mA

Avanoa Filifiliga

0-20mA

Tapula'a Maualuga Tapula'a Lalo
Auala
Avanoa Filifiliga
Tapula'a Maualuga Tapula'a Lalo

20-4mA
Vevela Autu 4-20mA 0-20mA 20-4mA

ProCon® — DO3000-C Fa'asologa
Pule o le Okesene Fa'amavae

Faiga Fa'amaumauga Fa'amaumauga

4800BPS

Fua Faatatau o Baud

9600BPS

19200BPS

Leai

RS485

Siaki Fa'atasi

Ose

E oo lava

Taofi le Pipi

1 Bit 2 Bit

Node Network

001 +

Vaeluaga/Itu

Tulaga Ata (Trend Chart)

1h/Itu 12h/Itu

Fa'aali e tusa ai ma fa'atulagaga vaeluaga 480 points | lau

24h/Itu

Su'esu'ega Fa'amatalaga

Tausaga | Masina | Aso

7.5s

Fa'amaumauga Fa'asologa

90s

180s

Fa'amatalaga Manatu

176932 Fa'ailoga

Fa'amatalaga Fa'amatalaga

Gagana

Igilisi Saina

Aso | Taimi

Tausaga-Masina-Aso Itula-Minute-Lua

Maulalo

Fa'aaliga

Fa'aali Saosaoa

Tulaga Medium High

Malamalama i tua

Faasaoina Bright

Software Version 1.9-1.0

Faʻamatalaga o le Polokalama

Fa'atonu Fa'amatalaga 0000

Numera seriolo

Leai se falegaosimea fa'aletonu
Ioe

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Fa'asologa
Pule o le Okesene Fa'amavae

Faiga

Fa'alogoina i le taimi nei
Su'ega Relay

O lo'o i ai nei 1 4mA o lo'o i ai nei 1 20mA o lo'o iai nei 2 4mA o lo'o iai nei 2 20mA.
Relai 1 Relai 2 Relai 3

O pito lelei ma le le lelei o le ammeter e fesoʻotaʻi atu i le 1 poʻo le 2 o loʻo i ai nei faʻasologa o mea faigaluega, faʻapipiʻi [ ] ki e faʻafetaui ai le taimi nei i le 4 mA poʻo le 20mA , kiliki [ENT] ki e faʻamaonia.
Filifili vaega e tolu o faʻasalalauga ma faʻalogo i le leo o ki e lua, o le relay e masani lava.

Fa'avasegaina

Oomi le [MENU] e ulu atu i le tulaga seti ma filifili le calibration

Fa'avasegaina Fa'asologa Fa'asologa
Faʻatulagaina o Fanua

Anaerobic Calibration Air Calibration
Field Calibration Offset Fetuuna'iga Fa'ata'otoga

Fa'avasegaina Fofo Fa'ata'atia
Oomi le ki [ENT] e fa'amaonia ma ulufale i le fa'ata'ita'iga fa'ata'ita'iga fofo. Afai ua fa'avasegaina le meafaigaluega, o le a fa'aalia e le lau le tulaga o le fa'avasegaina. Toe oomi le [ENT] ki e ulufale ai i le toe fa'avasegaina pe a mana'omia.
Afai e fa'aosofia oe e le mata'itū e ulufale i le upu fa'amaonia saogalemu, oomi le [ ] po'o le [ ] ki e seti ai le upu fa'amaonia saogalemu, ona oomi lea [ENT] e fa'amaonia ai le upu fa'amaonia saogalemu.

Anaerobic Calibration
A maeʻa ona ulufale i le faiga faʻavasega, o le meafaigaluega e faʻaalia e pei ona faʻaalia i le ata. O le eletise DO e tu'u i totonu o le vai fa'aanaerobic e aunoa ma le ufiufi o le pulou.
O le tau tutusa "faailoga" o le a faʻaalia i le tulimanu agavale pito i luga o le lau. A mautu le tau o le "signal", fetaomi [ENT] e faʻamaonia.
I le faagasologa o le faʻavasegaina, o le itu taumatau o le lau o le a faʻaalia ai le tulaga faʻavasega.
· Fai = ua manuia le fa'avasegaina.
· Fa'avasegaina = o lo'o fa'agasolo le fa'avasegaina.
· Err = le mafai ona fa'avasegaina.
A mae'a le fa'avasegaina, oomi le ki [MENU] e toe fo'i i le lisi pito i luga.

Anaerobic 0 mg/L

Fa'avasegaina

Fluorescence Dissolved Oxygen

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Fa'asologa
Pule o le Okesene Fa'amavae

Fa'avasegaina o le Ea
A maeʻa ona ulufale i le faiga faʻavasega, o le meafaigaluega e faʻaalia e pei ona faʻaalia i le ata. Tuu le DO electrode i le ea ma le pulou paolo.
O le tau tutusa "faailoga" o le a faʻaalia i le tulimanu agavale pito i luga o le lau. A mautu le tau o le "signal", fetaomi [ENT] e faʻamaonia.
I le faagasologa o le faʻavasegaina, o le itu taumatau o le lau o le a faʻaalia ai le tulaga faʻavasega.
· Fai = ua manuia le fa'avasegaina.
· Fa'avasegaina = o lo'o fa'agasolo le fa'avasegaina.
· Err = le mafai ona fa'avasegaina.
A mae'a le fa'avasegaina, oomi le ki [MENU] e toe fo'i i le lisi pito i luga.

Ea 8.25 mg/L

Fa'avasegaina

Fluorescence Dissolved Oxygen

Faʻatulagaina o Fanua
Filifili auala fa'avasega i luga ole laiga: [Linear calibration], [Offset adjustment], [Linear adjustment].
Fa'avasegaina Fa'afanua A tu'uina atu fa'amaumauga mai le falesu'esu'e po'o le mea faigaluega feavea'i i totonu o lenei mea, o le a otometi lava ona fa'asa'o e le meafaigaluega fa'amaumauga.

Fa'avasegaina fanua

Fa'avasegaina

SP1

SP3

Fluorescence Dissolved Oxygen

Fa'amauina I'uga Fa'avasegaina: A'o lanu meamata le fa'ailoga "ENT", oomi le [ENT] e fa'amaonia. Fa'aleaogaina: Oomi le ki [ ] e sui ai le ata lanumeamata i le ESC, ma taomi [ENT] e fa'amaonia.
Fetuunaiga Offset Fa'atusatusa fa'amaumauga mai meafaigāluega fe'avea'i ma fa'amaumauga e fuaina e meafaigaluega. Afai ei ai se mea sese, o faʻamatalaga sese e mafai ona suia e lenei galuega.
Fetuunaiga laina laina laina taua pe a maeʻa le "faʻatulagaina o fanua" o le a faʻasaoina i lenei vaitaimi ma o faʻamaumauga o fale gaosimea o le 1.00.

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Fa'asologa
Pule o le Okesene Fa'amavae

Tulaga Ata (Trend Chart)

Faamaumauga faamaumauga

Su'esu'e Pi'o (Trend Chart)
Fa'asologa o Su'esu'ega Fa'amatalaga

Vaeluaga/Itu
1h/mata
12h/mata
24h/mata Tausaga/Masina/Aso
7.5s 90s 180s

400 points ile lau, fa'aalia le kalafi o fa'amaumauga lata mai e tusa ai ma fa'asologa o va'aiga
400 togi ile lau, fa'aali siata fa'asolo ole 16 aso mulimuli o fa'amaumauga
400 togi ile lau, fa'aali siata fa'asolo ole 200 aso mulimuli o fa'amaumauga
400 togi ile lau, fa'aali siata fa'asolo ole 400 aso mulimuli o fa'amaumauga
Tausaga/Masina/aso Taimi: Minute: Unite Taua Lona Lua
Teu Fa'amatalaga Ta'i 7.5 Sekona
Teu Fa'amatalaga Ta'i 90 Sekona
Teu Fa'amatalaga Ta'i 180 Sekona

Oomi le [MENU] fa'amau e toe fo'i i le lau fua. Oomi le faamau [ /TREND] i le faiga fua e view le fa'asologa o siata o fa'amaumauga fa'asaoina sa'o. E 480 seti o faʻamaumauga faʻamaumauga i le mata, ma o le vaeluaga taimi o faʻamaumauga taʻitasi e mafai ona filifilia [7.5s, 90s, 180s), e fetaui ma faʻamatalaga o loʻo faʻaalia i le [1h, 12h, 24h] i le mata.

Fluorescence Dissolved Oxygen
I le tulaga o loʻo i ai nei, faʻapipiʻi le [ENT] ki e faʻanofo ai le laina faʻaaliga faʻamatalaga i le agavale ma le taumatau (lanu meamata) ma faʻaalia faʻamatalaga i le agavale ma le taumatau. O le oomi umi o le ki [ENT] e mafai ona faatelevaveina le se'e. (Pe a lanumeamata le ata pito i lalo. O le ki [ENT] o le itu lea e sui ai, oomi le ki [/TREND] e sui ai le itu o le se'e)

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Fa'asologa
Pule o le Okesene Fa'amavae

MODBUS RTU
O le numera o fa'amatalaga meafaigaluega o lenei pepa o le V2.0; o le numera o le polokalama o le V5.9 ma luga. O lenei pepa o loʻo faʻamatalaina le MODBUS RTU atinaʻe i auiliiliga ma o le mea faʻatatau o se polokalama polokalama.
MODBUS Poloaiga Fa'atonu
Fa'amatalaga fa'asologa o fa'amaumauga i lenei pepa; Fa'aaliga fa'alua, suffix B, mo fa'ata'ita'igaample: 10001B – fa'aaliga tesi, e aunoa ma se prefix po'o se suffix, mo example: 256 Fa'aaliga Hexadecimal, prefix 0x, mo example: 0x2A ASCII uiga po'o ASCII manoa fa'aaliga, mo example: “YL0114010022″
Fa'atonuga Poloaiga O le MODBUS application protocol o lo'o fa'amatalaina le Simple Protocol Data Unit (PDU), lea e tuto'atasi mai le fa'avae feso'ota'iga.

Code Galuega

Fa'amaumauga

Ata.1 : Vaega o Fa'amaumauga o Fa'amaumauga a le MODBUS
MODBUS fa'afanua fa'akomepiuta i luga o se pasi fa'apitoa po'o feso'ota'iga e fa'ailoa mai ai vaega fa'aopoopo o fa'amaumauga fa'amaumauga. O le kalani na te amataina le fesuiaiga o le MODBUS na te fatuina le MODBUS PDU, ona faʻaopoopoina lea o le vaega e faʻavae ai le PDU fesoʻotaʻiga saʻo.

Tuatusi Faauluuluga

MODBUS SERIAL LINE PDU

Code Galuega

Fa'amaumauga

CRC

MODBUS PDU
Ata.2 : Fa'ata'ita'iga a le MODBUS mo Feso'ota'iga Fa'asologa

I luga ole laina laina ole MODBUS, ole tuatusi tuatusi e na'o le tuatusi meafaigaluega pologa. Fautuaga: O le numera o le tuatusi o le masini o le 1…247 Seti le tuatusi masini a le pologa i le tuatusi tuatusi o le fa'avaa talosaga na lafoina e le talimalo. A tali mai le meafaigaluega a le pologa, e tu'u le tuatusi o le meafaigaluega i le vaega o le tuatusi o le fa'avaa tali ina ia iloa ai e le pule sili po o ai le pologa o lo'o tali mai.
O tulafono fa'atino e fa'ailoa mai ai le ituaiga o fa'agaioiga e faia e le 'au'aunaga. Ole vaega ole CRC ole fa'ai'uga ole fa'atatauga ole "si'i fa'aletonu", lea e fa'atinoina e tusa ai ma fa'amatalaga fa'amatalaga.

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Fa'asologa
Pule o le Okesene Fa'amavae

MODBUS RTU Fa'aliliuina Faiga

A fa'aogaina e le meafaigaluega le RTU (Remote Terminal Unit) mo feso'ota'iga fa'asologa o le MODBUS, ta'itasi 8-bit byte o fa'amatalaga o lo'o iai mataitusi hexadecimal e lua 4-bit. O le advan aututagO lenei faiga e sili atu le maualuga o le amio ma sili atu le faʻaogaina o faʻamaumauga nai lo le ASCII mode ma le fua tutusa o le pa. O fe'au ta'itasi e tatau ona fa'asalalauina o se manoa fa'aauau.
Le fa'atulagaina o paita ta'itasi ile RTU mode (11 bits): Fa'ailoga faiga: 8-bit binary O ta'i 8-bit ta'itasi i se fe'au o lo'o i ai mataitusi hexadecimal e lua 4-bit (0-9, AF) Bits i paita ta'itasi: 1 bit amata.
8 pa'u fa'amaumauga, o le fa'ai'uga aupito maualalo muamua e aunoa ma ni pa'u siaki tutusa.
O mataitusi ta'itasi po'o le paita e lafo i le fa'atonuga lea (mai le agavale i le taumatau) le pito sili ona taua (LSB)... Mata'utia Fa'ailoga (MSB)

Pisi amata 1 2 3 4 5 6 7 8 Pisi taofi Taofi
Ata.3: RTU Pattern Bit Sequence

Siaki Fa'atonuga Fa'atonu: Si'i Fa'atonu Fa'asologa (CRC16) Fa'amatalaga Fa'asologa:

Mea faigaluega pologa

Code Galuega

Fa'amaumauga

tuatusi

1 paita

0…252 paita

Ata 4 : Fa'asologa o Fa'amatalaga RTU

CRC 2 byte CRC Low byte | CRC Paita maualuga

Ole pito maualuga ole fa'avaa ole MODBUS ole 256 bytes MODBUS RTU Fa'amatalaga Fa'amatalaga I le RTU mode, o fe'au fe'au e fa'ailogaina ile va'ava'ava'a ole a itiiti ifo ile 3.5 taimi, lea e ta'ua o le t3.5 i vaega mulimuli ane.

Fa'avaa 1

Fa'avaa 2

Fa'avaa 3

3.5 paita
Amata 3.5 paita

3.5 paita

Fa'asinomaga Galuega code

3.5 paita

4.5 paita

Fa'amaumauga

CRC

Nx8

16 bit

Ata.5 : Vaavaa Fe'au RTU

Fa'ai'u 3.5 paita

O le fa'avaa atoa o le fe'au e tatau ona lafo i se fa'asologa fa'aauau. A sili atu le 1.5 mataitusi le va o taimi malolo i le va o mataitusi e lua, o le faʻamatalaga faʻamatalaga e manatu e le atoatoa ma e le mauaina e le tagata e mauaina le faʻamatalaga faʻamatalaga.

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Fa'asologa
Pule o le Okesene Fa'amavae

Fa'avaa 1 masani

Fa'avaa 2 sese

<1.5 paita

> 1.5 paita

Ata 6 : MODBUS RTU CRC Siaki

O le RTU mode o loʻo i ai se faʻailoga e iloa ai mea sese e faʻavae i luga o se siaki faʻasolosolo faʻasolosolo (CRC) algorithm e faʻatino i luga o feʻau uma. E siaki e le vaega ole CRC mea o loʻo i totonu o le feʻau atoa ma faʻatino lenei siaki tusa lava pe o le feʻau e iai se siaki faʻapitoa. O le CRC domain o lo'o i ai se tau 16-bit e aofia ai le lua 8-bit bytes. CRC16 siaki ua talia. E muamua paita maualalo, paita maualuga e muamua atu.

Fa'atinoina o le MODBUS RTU i Meafaigaluega

E tusa ai ma le faʻamatalaga aloaia a le MODBUS, o le poloaiga e amata i le 3.5 character interval triggering command, ma o le faaiuga o le poloaiga o loʻo faʻatusalia foi e le 3.5 character interval. Ole tuatusi ole masini ma le code function MODBUS e 8 bits. O le manoa fa'amaumauga o lo'o i ai n*8 bits, ma o le manoa fa'amaumauga o lo'o iai le tuatusi amata o le resitala ma le numera o tusi resitala faitau/tusi. CRC siaki e 16 bits.

Taua

Amata

Galuega Fa'asinomaga Meafaigaluega

Fa'amaumauga

Leai ni fa'ailoga paita ile 3.5 mataitusi

Byte

3.5

1-247 1

Tulafono Fa'atino
Faʻamaonia i le MODBUS
Fa'amatalaga

Fa'amaumauga
Faʻamaonia i le MODBUS
Fa'amatalaga

Ata 7: MODBUS faʻamatalaga o Faʻamatalaga Faʻamatalaga

Aotelega Siaki

Fa'ai'u

Leai ni fa'ailoga paita

CRCL CRCL

i le taimi 3.5

mataitusi

3.5

Meafaigaluega MODBUS RTU Galuega Fa'atino
E na'o le lua ole fa'aoga ole MODBUS e fa'aogaina e le meafaigaluega: 0x03: Faitau ma taofi le resitala 0x10: Tusi le tele o tusi resitala.
MODBUS Function Code 0x03: Read-and-hold Register O lenei code function e faʻaaogaina e faitau ai le faʻaauau poloka poloka o le resitala o loʻo taofia o le masini mamao. Talosaga i le PDU e faʻamaonia le tuatusi resitala amata ma le numera o resitala. Tuatusi resitala mai le leai. O le mea lea, o le tusi resitala tuatusi 1-16 o le 0-15. O faʻamaumauga resitala i faʻamatalaga tali e faʻapipiʻiina i le lua paita i le resitala. Mo resitara ta'itasi, o le paita muamua o lo'o i ai ni pa'i maualuluga ma le pa'i lona lua o lo'o iai ni pa'i maualalo. Talosaga:

Code Galuega

1 paita

0x03

Tulaga Amata

2 paita

0x0000….0xfffff

Faitau le Numera Resitala

2 byte Ata.8 : Faitau ma taofi le faavaa talosaga resitala

1…125

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Fa'asologa
Pule o le Okesene Fa'amavae

Tali:

Code Galuega

1 paita

0x03

Numera o paita

2 paita

0x0000….0xfffff

Faitau le Numera Resitala

2 paita

1…125

N = Numera Resitala

Ata 9: Faitau ma taofi le fa'avaa o le tali

O lo'o fa'aalia i lalo le fa'ava'a talosaga ma le fa'avaa tali fa'atasi ma le tusi resitala faitau ma taofi 108-110 o se fa'aaligaample. (O mea o lo'o i totonu o le tusi resitala 108 e na'o le faitau, fa'atasi ai ma tau paita e lua o le 0X022B, ma mea o lo'o i totonu o le resitala 109-110 o le 0X0000 ma le 0X0064)

Talosaga Fa'avaa

Numera Faiga
Code Galuega
Tulaga Amata (Paita maualuga)
Tulaga Amata (Low byte)
Numera o Resitala Faitau (Paita Maualuluga)
Numera o Resitala Faitau (Low Bytes)

(Hexadecimal) 0x03 0x00 0x6B 0x00
0x03

Fua o Tali

Numera Faiga Fa'atino Code Byte Count
Resitala Tau (Paita Maualuluga) (108)

(Hexadecimal) 0x03 0x06 0x02

Resitala Tau (Paita Maulalo) (108)

0x2B

Resitala Tau (Paita Maualuluga) (109)
Resitala Tau (Low Bytes) (109) Register Value (High Bytes) (110) Register Value (Low Bytes) (110)

0x00
0x00 0x00 0x64

Ata 10 : Esoample faitau ma taofi tusi talosaga ma fa'avaa tali

MODBUS Galuega Fa'atino 0x10 : Tusi Tusi Resitala Tele

O lenei numera o galuega e faʻaaogaina e tusi ai resitara faʻaauau i masini mamao (1… 123 resitara) poloka e faʻamaonia ai le tau o tusi resitala o loʻo tusia i totonu o le faʻasologa o faʻamatalaga talosaga. O fa'amaumauga o lo'o fa'apipi'iina ile lua paita ile resitala. Tali fa'atusa toe fa'afo'i le code galuega, tuatusi amata ma le numera o tusi resitala tusia.
Talosaga:

Code Galuega

1 paita

0x10

Tulaga Amata

2 paita

Numera o tusi resitala

2 paita

Numera o paita

1 paita

Resitala Tulaga Taua

N x 2 paita

Ata 11 : Tusi Fa'avaa Talosaga Talosaga Tele

*N = Numera Resitala

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Fa'asologa
Pule o le Okesene Fa'amavae

Tali:

Code Galuega

1 paita

0x10

Tulaga Amata

2 paita

0x0000….0xffff

Numera Resitala

2 paita

1…123(0x7B)

N = Numera Resitala

Ata 12 : Tusi Fa'avaa Tali Tusitala se tele

O le fa'avaa talosaga ma le fa'avaa tali o lo'o fa'aalia i lalo i tusi resitala se lua o lo'o tusia ai le tau 0x000A ma le 0x0102 i le tuatusi amata o le 2.

Talosaga Fa'avaa

(Hexadecimal)

Fua o Tali

(Hexadecimal)

Numera Faiga Fa'atino Code
Tuatusi Amata (Paita Maualuga) Tuatusi Amata (Paita maualalo) Numera Resitala Fa'aofi (Paita Maualuga) Numera Tusi Resitala (Paita maualalo)
Numera o paisa Resitala Taua (Paita maualuga) Tau Resitala (Paita maualalo) Tau Resitala (Paita maualuga) Tau Resitala (Paita maualalo)

0x10 0x00 0x01 0x00 0x02 0x04 0x00 0x0A 0x01 0x02

Numera Faiga Fa'atino Code
Tuatusi Amata (Paita Maualuga) Tuatusi Amata (Paita maualalo) Numera Resitala Fa'aofi (Paita Maualuga) Numera Tusi Resitala (Paita maualalo)

0x10 0x00 0x01 0x00 0x02

Ata 13 : Esoample tusiaina o le tele o talosaga resitala ma fa'avaa tali

Fa'amatalaga Fa'amatalaga i Meafaigaluega

Fa'amatalaga Fa'afefeteina: Mea fa'alele, fa'atutusa ma le IEEE 754 (fa'ato'a tasi)

Fa'amatalaga

Faailoga

Fa'asinomaga

Mantissa

Bit

30…23

22…0

Su'ega Fa'asinomaga

127

Ata 14: Fa'a'au'au Fa'asa'o Tasi Fa'amatalaga (4 bytes, 2 MODBUS Registers)

Aofa'iga 22…0

ProCon® — DO3000-C Fa'asologa
Pule o le Okesene Fa'amavae
Example: Tu'ufa'atasi le 17.625 i le la'asaga lua Laasaga 1: Fa'aliliuina le 17.625 i le fa'atesimale i se numera fa'afefeteina ile fa'a-lua, su'e muamua le fa'atusa fa'alua o le vaega numera 17decimal= 16 + 1 = 1×24 + 0×23 + 0× 22 + 0×21 + 1×20 O le fa'atusa fa'alua ole vaega ole numera 17 ole 10001B Ona maua ai lea o le numera binary o le vaega tesimale 0.625= 0.5 + 0.125 = 1×2-1 + 0×2-2 + 1×2-3 O le numera binary o le vaega tesimale 0.625 o le 0.101B. O lea la o le numera fa'alele o le 17.625 i le fa'ailoga tesimale o le 10001.101B Laasaga 2: Su'e e su'e le fa'asologa. Si'i le 10001.101B i le agavale se'ia na'o le tasi le togi tesimale, e maua ai le 1.0001101B, ma le 10001.101B = 1.0001101 B× 24 . O le vaega fa'atele o le 4, fa'aopoopo i ai le 127, e avea ma 131, ma o lona fa'atusa fa'alua o le 10000011B. Laasaga 3: Fa'atatau le numera o le si'usi'u A mae'a ona aveese le 1 a'o le'i o'o i le numera tesimale o le 1.0001101B, o le numera fa'ai'u o le 0001101B (aua a'o le'i o'o i le numera tesimale e tatau ona 1, o lea e fa'atonu ai e le IEEE e na'o le togi tesimale i tua e mafai ona fa'amauina). Mo le faʻamatalaga taua o le 23-bit mantissa, o le muamua (ie natia bit) e le o tuʻufaʻatasia. O fasi natia o fasi i le itu agavale o le vavae, lea e masani ona seti i le 1 ma taofiofia. Laasaga 4: Fa'amatalaga pusi Fa'ailoga O le fasi fa'ailoga o le numera lelei o le 0, ma le fa'ailoga o le numera le lelei o le 1, o le mea lea o le fa'ailoga o le 17.625 o le 0. La'asaga 5: Su'e i le fa'afefeteina numera 1 bit symbol + 8 bit index + 23-bit mantissa 0 10000011 00011010000000000000000B (le o loʻo faʻaalia le faiga o le hexadecimal o le 0 x418d0000 ) Faʻamatalaga Faʻamatalaga: 1. Afai o le tagata faʻapipiʻi faʻaaogaina e le tagata faʻaoga o loʻo i ai se galuega a le faletusi e faʻatinoina ai lenei galuega, e mafai ona valaʻau saʻo le galuega a le faletusi, mo example, fa'aaoga le gagana C, ona mafai lea ona e vala'au sa'o i le C library function memcpy e maua ai se fa'atusa fa'atusa o le fa'aputuga o mea fa'afefete i le manatua. Mo example: floatdatadata; // fa'aliliuina numera fa'afefeteina fa'ate'a fa'aleaogaina* outdata; memcpy (outdata, & floatdata, 4); Faʻapea o le floatdata = 17.625 Afai o se faʻaoga laʻititi laʻititi, pe a uma ona faʻatinoina le faʻamatalaga o loʻo i luga, o faʻamaumauga o loʻo teuina i totonu o le tuatusi faʻamatalaga outdata o le 0x00. Outdata + 1 teuina faʻamatalaga e pei ole 0x00 tuatusi iunite (outdata + 2) teuina faʻamatalaga e pei ole 0x8D tuatusi iunite (outdata + 3) teuina faʻamatalaga e pei ole 0x41 Afai o le tele-iuga tulaga teuina, ina ua uma ona faatino le faamatalaga o loo i luga, o le faamatalaga teuina i outdata o tuatusi iunite o le 0x41 tuatusi iunite (outdata + 1) teu fa'amaumauga e pei ole 0x8D tuatusi iunite (outdata + 2) teu fa'amaumauga e pei o 0x00 tuatusi iunite (outdata + 3) teuina faʻamaumauga e pei o 0x00 2. Afai e le faʻaaogaina e le tagata faʻapipiʻi le galuega a le faletusi o lenei galuega, e mafai ona faʻaogaina galuega nei e ausia ai lenei galuega:

ProCon® — DO3000-C Fa'asologa
Pule o le Okesene Fa'amavae

void memcpy(vale *dest,fa'aleaogaina *src,int n) {

char *pd = (char *)dest; char *ps = (char *)src;

mo(int i=0;i

Ona fai lea o se valaau i le memcpy i luga (outdata,&floatdata,4);

Example: Tu'ufa'atasi le numera fa'afefeteina 0100 0010 0111 1011 0110 0110 0110 10B i le numera tesimale
Laasaga 1: Vaevae le numera opeopea fa'alualua 0100 0010 0111 1011 0110 0110 0110B ile fasi fa'ailoga, fasi fa'atele ma le bit mantissa.

0 10000100

11110110110011001100110B

Fa'ailoga 1-bit + 8-bit index + 23-bit tail sign bit S: 0 e fa'ailoa ai numera lelei Tulaga fa'asinomaga E: 10000100B =1×27+0×26+0×25+0×24 + 0×23+1× 22+0×21+0×20 =128+0+0+0+0+4+0+0=132

Mantissa fasi M: 11110110110011001100110B = 8087142

Laasaga 2: Fa'atatau le numera tesimale

D = (-1)×(1.0 + M/223)×2E-127

= (-1)0×(1.0 + 8087142/223)×2132-127 = 1×1.964062452316284×32

= 62.85

Fa'asinomaga Code:

floatTOdecimal(umi int byte0, umi int byte1, umi int byte2, umi int byte3) {

long int realbyte0,realbyte1,realbyte2,realbyte3; char S;

umi int E,M;

opeopea D; realbyte0 = byte3; realbyte1 = byte2; realbyte2 = byte1; realbyte3 = byte0;

afai((realbyte0&0x80)==0) {

S = 0;//numera lelei }

isi

{

S = 1;//numera leaga }

E = ((realbyte0<<1)|(realbyte1&0x80)>>7)-127;

M = ((realbyte1&0x7f) << 16) | (realbyte2<< 8)| realbyte3;

D = pow(-1,S)*(1.0 + M/pow(2,23))* pow(2,E);

toe faafoi D; }

Fa'amatalaga o galuega: fa'asologa byte0, byte1, byte2, byte3 o lo'o fa'atusalia ai le 4 paita o le numera fa'afefeteina binary.

Le numera tesimale ua liua mai le tau toe faafoi.

Mo example, auina atu e le tagata e faaaogāina le poloaiga e maua ai le tau o le vevela ma le tau o le okesene solo i le suʻega. O paita e 4 o lo'o fa'atusalia ai le tau o le vevela i le fa'avaa tali na maua e 0x00, 0x00, 0x8d ma le 0x41. Ona mafai lea e le tagata fa'aoga ona maua le numera tesimale o le tau e fetaui ma le vevela e ala i le fa'amatalaga valaau lea.
O lona uiga o le vevela = 17.625.

Vave fa'afefe = floatTOdecimal( 0x00, 0x00, 0x8d, 0x41)

ProCon® — DO3000-C Fa'asologa
Pule o le Okesene Fa'amavae

Faitau Faiga Fa'atonu
O le fesoʻotaʻiga fesoʻotaʻiga e faʻaaogaina le MODBUS (RTU) protocol. O le anotusi ma le tuatusi o le fesoʻotaʻiga e mafai ona suia e tusa ai ma manaʻoga o tagata faʻatau. O le faʻaogaina le faʻaogaina ole tuatusi fesoʻotaʻiga 01, baud rate 9600, e oʻo lava ile siaki, tasi le taofi, e mafai e tagata faʻaoga ona seti a latou lava suiga; Fuafuaga code 0x04: O lenei galuega e mafai ai e le tagata talimalo ona maua fua taimi moni mai pologa, lea e faʻamaonia o se tasi-saʻo saʻo opeopea-mataitusi (e pei o nofoia lua tuatusi resitala sosoo), ma ia faailogaina vaega tutusa ma tuatusi resitala eseese. O le tuatusi feso'ota'iga e fa'apea:
0000-0001: Tau vevela | 0002-0003: Autu Fua Taua | 0004-0005: Tempera ma Voltage Taua |
0006-0007: Autu Voltage Fa'atauaina Feso'ota'iga examples: Example numera o galuega tauave 04 faatonuga: Fesoʻotaʻiga tuatusi = 1, vevela = 20.0, tau o le ion = 10.0, vevela voltage = 100.0, ion voltage = 200.0 Host Auina: 01 04 00 00 08 F1 CC | Tali a Pologa: 01 04 10 00 41 A0 00 41 20 00 42 C8 00 43 48 81 E8 Faʻamatalaga: [01] Faʻatusalia le tuatusi fesoʻotaʻiga meafaigaluega; [04] Fa'atusa le code function 04; [10] o lo'o fa'atusalia ai fa'amaumauga 10H (16) byte; [00 00 00 41 A0] = 20.0; / tau vevela [00 00 4120]= 10.0; // Autu Fua Taua [00 00 42 C8] = 100.0; // Temperature ma Voltage Taua [00 00 43 48] = 200.0; // Autu fua voltage tau [81 E8] fa'atusa CRC16 siaki code;

Oxygen Saturation Table i lalo ole vevela eseese

°F | °C

mg/L

°F | °C

mg/L

°F | °C

mg/L

32 | 0

14.64

57 | 14

10.30

82 | 28

7.82

34 | 1

14.22

59 | 15

10.08

84 | 29

7.69

34 | 2

13.82

61 | 16

9.86

86 | 30

7.56

37 | 3

13.44

62 | 17

9.64

88 | 31

7.46

39 | 4

13.09

64 | 18

9.46

89 | 32

7.30

41 | 5

12.74

66 | 19

9.27

91 | 33

7.18

43 | 6

12.42

68 | 20

9.08

93 | 34

7.07

44 | 7

12.11

70 | 21

8.90

95 | 35

6.95

46 | 8

11.81

71 | 22

8.73

97 | 36

6.84

48 | 9

11.53

73 | 23

8.57

98 | 37

6.73

50 | 10

11.26

75 | 24

8.41

100 | 38

6.63

52 | 11

11.01

77 | 25

8.25

102 | 39

6.53

53 | 12 55 | 13

10.77 10.53

79 | 26 80 | 27

8.11 7.96

Manatua: o lenei laulau e mai le faʻaopoopoga C o le JJG291 - 1999.

O le okesene fa'amavae e mafai ona fa'atatauina i mamafa eseese o le ea e pei ona ta'ua i lalo.

A3=

PA·101.325

I le fua Fa'atatau I le fua fa'atatau: As- Solubility o le mamafa o le ea ile P(Pa); A- Soluble i le mamafa o le ea o le 101.325(Pa);

P– mamafa, Pa.

ProCon® — DO3000-C Fa'asologa
Pule o le Okesene Fa'amavae

Tausiga
E tusa ai ma manaʻoga o le faʻaaogaina, o le tulaga faʻapipiʻi ma le tulaga galue o le meafaigaluega e fai si lavelave. Ina ia mautinoa o loʻo galue masani le meafaigaluega, e tatau i tagata faʻaleleia ona faʻatino le tausiga masani i luga o le meafaigaluega. Fa'amolemole fa'alogo i mea nei a'o fa'aleleia:
Siaki le siosiomaga galue o le meafaigaluega. Afai o le vevela e sili atu i le fua fa'atatau o le meafaigaluega, fa'amolemole fai ni faiga talafeagai; a leai, e ono fa'aleagaina le meafaigaluega pe fa'aitiitia lona ola tautua;
A fa'amama le atigi palasitika o le meafaifa'aili, fa'amolemole fa'aaoga se ie vaivai ma se fa'amama vaivai e fa'amama ai le atigi. Siaki pe mautu le uaea i le pito o le meafaigaluega. Fa'alogo lelei e motusia le mana AC po'o DC
a'o le'i aveese le ufiufi uaea.

Seti afifi

Fa'amatalaga o oloa

Tele

1) T6046 Fluorescence Online Dissolved Oxygen Meter

2) Mea Fa'apipi'i Mea Fa'apipi'i

3) Fa'agaioiina Tusi Taiala

4) Tusi Fa'ailoga Fa'ailoga

Fa'aaliga: Fa'amolemole siaki le seti atoa o meafaifa'aili a'o le'i fa'aogaina.

O isi fa'asologa o meafaigāluega su'esu'e a le kamupani, fa'amolemole saini i la matou webnofoaga mo su'esu'ega.

ProCon® — DO3000-C Fa'asologa
Pule o le Okesene Fa'amavae
Fa'amaonia, Toe Fa'afo'i ma Tapula'a
Fa'amaonia
Icon Process Controls Ltd fa'amaonia i le tagata muamua na fa'atauina ana oloa e fa'apea o ia oloa o le a sa'oloto mai fa'aletonu i meafaitino ma galuega i lalo o le fa'aoga masani ma le tautua e tusa ai ma fa'atonuga na tu'uina atu e Icon Process Controls Ltd mo se vaitaimi e tasi le tausaga mai le aso na fa'atau atu ai. o ia oloa. O le noataga o le Icon Process Controls Ltd i lalo o lenei tusi saisai e na'o le toe fa'aleleia po'o le toe sui, i le filifiliga a le Icon Process Controls Ltd, o oloa po'o vaega, lea e fa'amaonia e le su'esu'ega a le Icon Process Controls Ltd i lona fa'amalieina e fa'aletonu i meafaitino po'o galuega i totonu. le vaitaimi fa'amaonia. Icon Process Controls Ltd e tatau ona logoina e tusa ai ma faatonuga o loʻo i lalo o soʻo se tagi i lalo o lenei tusi saisai i totonu o le tolusefulu (30) aso o soʻo se faʻamatalaga e le o ogatasi le oloa. So'o se oloa e toe fa'aleleia i lalo o lenei warranty o le a fa'amaonia mo na'o le vaega o totoe o le ulua'i vaitaimi fa'amaonia. So'o se oloa e tu'uina atu e fai ma sui i lalo o lenei fa'amaonia o le a fa'amaonia mo le tausaga e tasi mai le aso na sui ai.
Toe fo'i
E le mafai ona toe faafoi oloa ile Icon Process Controls Ltd e aunoa ma se faatagaga muamua. Ina ia toe faafoi mai se oloa e manatu e faaletonu, alu i le www.iconprocon.com, ma lafo mai se pepa talosaga mo tagata e toe faafoi (MRA) ma mulimuli i faatonuga o loo iai. O oloa uma e fa'amaonia ma mea e le fa'amaonia e toe fa'afo'i ile Icon Process Controls Ltd e tatau ona lafo muamua ma inisiua. Icon Process Controls Ltd o le a le nafa ma soʻo se oloa na leiloa pe faʻaleagaina ile uta.
Tapulaa
O lenei warranty e le fa'aaogaina i oloa e: 1. e sili atu i le vaitaimi o le warranty po'o ni oloa ia e le o mulimulita'ia e le tagata fa'atau muamua i le warranty procedures.
ua otooto atu i luga; 2. ua fa'aleagaina ile eletise, masini po'o vaila'au ona o le le sa'o, fa'afuase'i po'o le fa'aaogaina fa'atamala; 3. ua suia pe suia; 4. so'o se isi e ese mai i tagata faigaluega ua fa'atagaina e le Icon Process Controls Ltd ua taumafai e toe fa'aleleia; 5. ua aafia i faalavelave po o faalavelave faalenatura; po'o le 6. ua fa'aleagaina a'o toe fa'afo'i uta i le Icon Process Controls Ltd
O lo'o iai le aiā a le Icon Process Controls Ltd e fa'ate'a fa'atasi ai lenei tusi saisai ma lafoa'i so'o se oloa ua toe fa'afo'i atu ile Icon Process Controls Ltd pe a: 1. o lo'o iai fa'amaoniga o se mea e ono lamatia ai o lo'o iai ma le oloa; 2. po'o le oloa na tumau pea e le'i tapaina i le Icon Process Controls Ltd mo le silia ma le 30 aso talu ona mae'a le Icon Process Controls Ltd.
ua talosagaina ma le faamaoni le tu'uina atu.
O lenei tusi saisai o lo'o i ai le tusi saisai e tasi na faia e le Icon Process Controls Ltd e feso'ota'i ma ana oloa. UMA FA'AALIGA FA'AALIGA, E A'OFIA AI LE FA'A'OA'OGA, O FA'AALIGA O LE FA'AFO'A'IGA MA LE FA'AVAE MO SE FA'AMATALAGA, E FA'AVA'IA FA'AVAE. O vaifofo mo le toe fa'aleleia po'o le toe sui e pei ona ta'ua i luga o fofo fa'apitoa ia mo le soliga o lenei tusi saisai. E LEAI SE MEA E FAIA Icon Process Controls Ltd ONA NOFOAIGA MO SO'O SE FA'AMATALAGA PO'O LE FA'AFIA'IGA O SO'O SE TUAGA E A'OFIA AI LE TAGATA TAGATA PO O MEATOA MONI POO MO MANU'AGA I SO'O SE TAGATA. O LENEI FAʻAALIGA E FAʻAVAE AI LE FAʻAALIGA FAʻAIʻU, FAʻAMATOA MA FAʻAALIGA FAʻAALIGA FAʻAALIGA MA E LEAI SE TAGATA E FAʻAVAEINA E FAIA SE ISI FAʻAALIGA POO SUI E FAI LE Icon Process Controls Ltd. O lenei tusi saisai o le a faauigaina e tusa ai ma tulafono a le itumalo o Ontario, Kanata.
Afai o se vaega o lenei tusi saisai e taofi e le aoga pe le mafai ona fa'amalosia mo so'o se mafua'aga, o lea su'esu'ega o le a le fa'aleaogaina ai so'o se isi aiaiga o lenei tusi saisai.
Mo fa'amaumauga fa'aopoopo o oloa ma fesoasoani fa'apitoa asiasi:
www.iconprocon.com | imeli: sales@iconprocon.com poʻo support@iconprocon.com | Ph: 905.469.9283

Pepa / Punaoa

Fa'atonuga ole Fa'agasologa ole ICON DO3000-C Fa'asologa Fa'asa'o ole Okesene Pule [pdf] Taiala mo Tagata Fa'aoga
DO3000-C Fa'asologa Fa'asa'o le Okesene Pule, DO3000-C Fa'asologa, Fa'asao le Okesene Pule, Pule o le Okesene, Pule

Fa'asinomaga

Tusi Taiala

DO3000-C Fa'asologa Fa'asa'o Oxygen Pule

Fa'amatalaga

Fa'amatalaga o oloa

Fa'atonuga fa'apipi'i

Fa'apipi'iina

Fa'apipi'iina o puipui

Fa'atonuga uaea

Fesili e Fai soo (FAQ)

Q: O le a le mea e tatau ona ou faia pe a faʻaalia e le masini se feʻau sese?

Q: O le a le tele o taimi e tatau ai ona faʻavasega le masini?

Q: E mafai ona faʻaogaina lenei pule ile siosiomaga i fafo?

Pepa / Punaoa

Fa'asinomaga

Tuu se faamatalaga

Fa'aleaogaina le tali