Njikwa Usoro ICON DO3000-C Series gbazere Oxygen njikwa ntuziaka onye ọrụ

Ihe mmetụta ikuku oxygen DO3000 na-eji fluorescence
quenching teknụzụ iji tọghata akara anya ka ọ bụrụ ọkụ eletrik
akara, na-enye agụta ikuku oxygen kwụsiri ike na a
algọridim 3D mepụtara onwe ya.

Ihe njikwa ikuku oxygen gbasasịa bụ mmiri dabere na microprocessor
quality online nlekota oru ngwá ọrụ n'ọtụtụ ebe dị iche iche
ngwa dị ka ụlọ ọrụ na-edozi mmiri ọṅụṅụ, nkesa
netwọk, ọdọ mmiri, ọrụ ọgwụgwọ mmiri, nsị
ọgwụgwọ, mmiri disinfection, na mmepụta usoro.

Ntuziaka nwụnye

Ntinye agbakwunyere

a) Agbanyere n'ime oghere mepere emepe

b) Dozie ngwá ọrụ site na iji ụzọ ndị enyere

Nwụnye mgbidi mgbidi

a) Wụnye ihe nkwado maka ngwa

b) Chekwaa ngwa ahụ site na iji mgbanaka mgbidi

Ntuziaka wiring

Ọnụ	Nkọwa
V+, V-, A1, B1	Ọwa ntinye dijitalụ 1
V+, V-, A2, B2	Ọwa ntinye dijitalụ 2
I1, G, I2	Mmepụta ugbu a
A3, B3	Mmepụta nkwukọrịta RS485
G, TX, RX	Mmepụta nkwukọrịta RS232
P+, P-	DC Power Tụkwasịnụ
T2+, T2-	Njikọ waya Temp
EC1, EC2, EC3, EC4	Njikọ Waya EC/RES
RLY3, RLY2, RLY1	Otu 3 Relays
L, N,	L- Live Waya \| N- Nnọpụiche \| Ala
REF1	[Nkọwa nke ọnụ ọnụ REF1]

Ajụjụ A na-ajụkarị (FAQ)

Ajụjụ: Kedu ihe m ga-eme ma ọ bụrụ na ngwaọrụ ahụ gosipụtara ozi mperi?

A: Ọ bụrụ na ngwaọrụ ahụ gosipụtara ozi njehie, rụtụ aka na onye ọrụ
akwụkwọ ntuziaka maka usoro nchọpụta nsogbu. Ọ bụrụ na nsogbu ahụ adịgide, kpọtụrụ
nkwado ndị ahịa maka enyemaka.

Ajụjụ: Ugboro ole ka ekwesịrị ịhazi ihe mmetụta ahụ?

A: The sensọ kwesịrị calibrated dị ka
ndụmọdụ ndị nrụpụta ma ọ bụ dị ka egosiri na ntuziaka onye ọrụ.
Nhazi nhazi oge niile na-eme ka agụ akwụkwọ ziri ezi.

Ajụjụ: Enwere ike iji njikwa a na gburugburu n'èzí?

A: A haziri onye njikwa maka ime ụlọ. Zere ikpughe ya
na ọnọdụ ihu igwe siri ike ma ọ bụ ìhè anyanwụ kpọmkwem iji gbochie
mmebi.

View Fullscreen

ProCon® — DO3000-C Series
Ihe njikwa ikuku oxygen gbazere
Ndenye Malite Manual

Gụọ akwụkwọ ntuziaka onye ọrụ nke ọma tupu ịmalite iji otu. Onye nrụpụta nwere ikike ime mgbanwe na-enweghị ọkwa mbụ.

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Series
Ihe njikwa ikuku oxygen gbazere

Ozi nchekwa
De-pressurize na ventilashion sistemu tupu echichi ma ọ bụ mwepụ Gozie ndakọrịta kemịkalụ tupu iji ya AGAkwala oke okpomọkụ ma ọ bụ nkọwa nrụgide mgbe niile na-eyi enyo nchekwa ma ọ bụ ọta ihu mgbe echichi na/ma ọ bụ ọrụ agbanwela ihe nrụpụta ngwaahịa.

Ịdọ aka ná ntị | Ịkpachara anya | Ihe egwu
Na-egosi ihe egwu nwere ike ime. Ọdịda ịgbaso ịdọ aka ná ntị niile nwere ike ibute mmebi akụrụngwa, ma ọ bụ ọdịda, mmerụ ahụ, ma ọ bụ ọnwụ.

Mara | Ihe ndetu nka
Na-egosipụta ozi ndị ọzọ ma ọ bụ usoro zuru ezu.

Ezubere iji
Mgbe ị na-enweta ngwá ọrụ, biko meghee ngwugwu ahụ nke ọma, lelee ma ngwá ọrụ na ngwa na-emebi site na njem na ma ngwa ahụ ezuola. Ọ bụrụ na achọtaghị ihe ọ bụla na-adịghị mma, biko kpọtụrụ ngalaba ọrụ ahịa anyị ma ọ bụ ụlọ ọrụ ndị ahịa mpaghara, ma debe ngwugwu ahụ maka nhazi nlọghachi. Data teknuzu edepụtara na mpempe data dị ugbu a na-etinye aka na a ga-akwadorịrị ya. Ọ bụrụ na mpempe data adịghị, biko tụọ ma ọ bụ budata ya na ibe anyị (www.iconprocon.com).
Ndị ọrụ maka ntinye, nhazi, na ịrụ ọrụ
Ngwa a bụ ihe nyocha na ngwa njikwa nwere oke nkenke. Naanị onye nwere nkà, onye zụrụ azụ ma ọ bụ ikike kwesịrị ịrụ nrụnye, nhazi na ịrụ ọrụ nke ngwá ọrụ. Gbaa mbọ hụ na eriri ọkụ kewapụrụ n'anụ ahụ na ọkụ ọkụ mgbe njikọ ma ọ bụ rụkwaa ya. Ozugbo nsogbu nchekwa ahụ mere, gbaa mbọ hụ na agbanyụrụ ngwaọrụ ahụ wee kwụsị. Maka example, ọ nwere ike ghara nchekwa mgbe ọnọdụ ndị a mere: 1. Nbibi pụtara ìhè na onye nyocha 2. Onye nyocha anaghị arụ ọrụ nke ọma ma ọ bụ na-enye nha akọwapụtara. 3. A na-echekwa ihe nyocha ahụ ogologo oge na gburugburu ebe okpomọkụ gafere 70 Celsius.
Ndị ọkachamara ga-etinyerịrị onye nyocha ahụ dịka nkọwa mpaghara dị mkpa si dị, yana ntuziaka etinyere na ntuziaka ọrụ.
Soro nkọwa nka na ntinye chọrọ nke onye nyocha.
Nkọwa ngwaahịa
Ihe mmetụta DO3000 Dissolved Oxygen sensọ na-eji teknụzụ na-emenyụ ọkụ na-ekpo ọkụ iji gbanwee akara ngosi ka ọ bụrụ akara ọkụ eletrik. Ọ na-ewepụta ọgụgụ isi oxygen kwụsiri ike na algọridim 3D mepụtara onwe ya.
Ihe njikwa ikuku oxygen gbasasịa bụ ngwa njikwa mmiri dị n'ịntanetị dabere na microprocessor. A na-eji ya eme ihe n'ọtụtụ ebe na osisi ọgwụgwọ mmiri ọṅụṅụ, netwọk nkesa mmiri ọṅụṅụ, ọdọ mmiri, ọrụ ọgwụgwọ mmiri, ọgwụgwọ nsị mmiri, nsị mmiri na usoro mmepụta ihe ndị ọzọ.

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Series
Ihe njikwa ikuku oxygen gbazere

Nkọwa nka nka

Mkpebi nkeji nso nso a bụ isi njehie ọnọdụ ọnọdụ okpomọkụ mkpebi mkpebi ọnọdụ okpomọkụ bụ isi njehie nkwụsi ike ugbu a Mmepụta Nkwukọrịta Nkwukọrịta Ọrụ Ndị ọzọ Ọrụ Ndị Kọntaktị Atọ Relay Control Nrụnye Ike Na-arụ ọrụ Ọnọdụ Na-arụ ọrụ Okpomọkụ dị n'ihe gbasara iru mmiri na-adịghị egbochi mmiri oke usoro nrụnye nha nha nha nha mmeghe.

0.005 ~ 20.00mg / L | 0.005 ~ 20.00ppm Fluorescence 0.001mg / L | 0.001ppm ± 1% FS 14 ~ 302ºF | -10 ~ 150.0oC (dabere na ihe mmetụta) 0.1 ° C ± 0.3 ° C pH: 0.01pH / 24h; ORP: 1mV / 24h 2 otu: 4-20mA RS485 MODBUS RTU Data Record & Curve Display 5A 250VAC, 5A 30VDC 9 ~ 36VDC | 85 ~ 265VAC | Oriri ike 3W Enweghị nnyonye anya magnetik siri ike gburugburu ma ewezuga mpaghara geomagnetic 14 ~ 140oF | -10~60°C 90% IP65 0.8kg 144 x 114 x 118mm 138 x 138mm Panel | Ugwu mgbidi | Pipeline

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Series
Ihe njikwa ikuku oxygen gbazere
Akụkụ
144mm

118mm

26mm

136mm

144mm

Akụkụ akụrụngwa M4x4 45x45mm
Nha oghere edobere azụ azụ 24-0585 © Icon Process Controls Ltd.

138mm + 0.5mm agbakwunyere n'ịkwalite ebipụ nha
4

138mm + 0.5mm

ProCon® — DO3000-C Series
Ihe njikwa ikuku oxygen gbazere
Ntinye agbakwunyere

D+ DB2

a) Agbanye n'ime oghere mepere emepe b) Mezie ngwa ahụ

RELAY A RELAY B RELAY C

Atụmatụ nke mmecha nke nwụnye
Nwụnye mgbidi mgbidi

150.3mm 6 × 1.5mm

58.1mm

Atụmatụ nke mmecha nke nwụnye
a) Wụnye ihe nkwado maka akụrụngwa b) Ndozi ihe nkedo mgbidi

N'elu view nke arịọnụ mgbodo Lezienụ anya nke echichi ntụziaka

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Series
Ihe njikwa ikuku oxygen gbazere
Wiring

REF2 INPUT2 TEMP2 TEMP2
GND CE RE ANYI

V+ V- A1 B1 V+ V- A2 B2 I1 G I2 A3 B3 G TX RX P+ P-
T2+ T2- EC1 EC2 EC3 EC4 RLY3 RLY2 RLY1 LN

SEN+ SENTEMP1 TEMP1 INPUT1 REF1

Ọnụ

Nkọwa

V+, V-, A1, B1

Ọwa ntinye dijitalụ 1

V+, V-, A2, B2

Ọwa ntinye dijitalụ 2

I1, G, I2

Mmepụta ugbu a

A3, B3

Mmepụta nkwukọrịta RS485

G, TX, RX

Mmepụta nkwukọrịta RS232

P+, P-

DC Power Tụkwasịnụ

T2+, T2-

Njikọ waya Temp

EC1,EC2,EC3,EC4

Njikọ Waya EC/RES

RLY3, RLY2, RLY1

Otu 3 Relays

L, N,

L- Live Waya | N- Nnọpụiche | Ala

Ọnụ ahịa REF1
TINYE 1 TEMP 1 SEN-, SEN+ REF2 INPUT 2 TEMP 2
GND CE, RE, ANYI

Nkọwa pH/ion ntụaka 1 pH/ion Ntụ 1
Okpomọkụ 2 Membrane DO/FCL
Ntụaka pH 2 pH nha 2
Okpomọkụ 2 Ala (maka ule) Constant Voltage maka FCL/CLO2/O3

Njikọ dị n'etiti ngwá ọrụ na ihe mmetụta: ọkụ ọkụ, mgbaàmà mmepụta, kọntaktị relay relay na njikọ dị n'etiti ihe mmetụta na ngwá ọrụ dị n'ime ngwá ọrụ ahụ, na wiring dị ka egosiri n'elu. Ogologo eriri eriri eriri nke eletrọd edobere na-abụkarị mita 5-10, tinye ahịrị ya na akara ma ọ bụ waya agba dabara na ihe mmetụta n'ime ọdụ kwekọrọ n'ime ngwa ahụ wee sie ike.

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Series
Ihe njikwa ikuku oxygen gbazere
Nkọwa ahụ igodo

2024-02-12 12:53:17

25.0 Celsius C

Electromagnetic conductivity mita

Ọnọdụ Ntọala NchNhr: Pịa igodo a ka ịpịgharịa nhọrọ menu
Nhazi: Lelee nhazi nhazi ọkwa: Pịa "ENT" ọzọ

Nhọrọ nkwenye

Tinye Ụdị Ngwọta Ọkọlọtọ

Ụdị nhazi menu: Pịa igodo a ka
bugharia nhọrọ menu

Tinye Ụdị Ntọala NchNhr | Nleta Nleta | Ụdị abụọ na-agbanwe agbanwe

Laghachi na NchNhr gara aga

Na ọnọdụ nha, pịa bọtịnụ a ka igosipụta Chart Trend

? Short Press: Short Press pụtara ịhapụ igodo ozugbo ka ịpịchara ya. (Ndabara na obere pịa ma ọ bụrụ na etinyeghị ya n'okpuru)
? Ogologo Pịa: Long Pịa bụ ịpị bọtịnụ maka 3 sekọnd wee hapụ ya.

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Series
Ihe njikwa ikuku oxygen gbazere

Ngosipụta nkọwa

Ekwesịrị ịlele njikọ ọkpọkọ niile na njikọ eletrik tupu ejiri ya. Mgbe agbanyere ike, mita ga-egosipụta dị ka ndị a.

Isi Uru

Ụbọchị Afọ | Ọnwa | Ụbọchị
Oge awa | Nkeji | Sekọnd

Oti mkpu na-adịghị mma nke Nkwukọrịta Electrode

Pasent ahụtage kwekọrọ na nha nke mbụ
Relay 1 (Blue gbanyụrụ & Red agbanyere)

Fluorescence agbazere oxygen

Relay 2 (Blue gbanyụrụ & Red agbanyere)
Ụdị akụrụngwa
Relay 3 (Blue gbanyụrụ & Red agbanyere)

Ngosipụta mgbanwe 1 dị ugbu a
Nhicha

Okpomọkụ
Nkwụghachi ụgwọ okpomọkụ akpaaka

Ụkpụrụ nha

Isetịpụ ọnọdụ

Fluorescence agbazere oxygen
Ụdị nhazi

Hazie Sistemụ Nbanye Data Ntọọ Nhazi
Fluorescence agbazere oxygen
Ngosipụta Chart Trend

Ikuku 8.25 mg/L

Nhazi

Fluorescence agbazere oxygen
24-0585 © Icon Process Controls Ltd.

Fluorescence agbazere oxygen
8

ProCon® — DO3000-C Series
Ihe njikwa ikuku oxygen gbazere

Nhazi menu
Ihe na-esonụ bụ nhazi menu nke ngwá ọrụ a

Nkeji

mg/L%

Nkwụghachi nrụgide 101.3

Hazie nhazi nhazi

Sensọ
Nhazi Ọkọlọtọ Okpomọkụ
Nhazi nhazi

Nkwụghachi ụgwọ salinity

Oxygen Voltage nkwụghachi

100mV

Saturation Oxygen Voltage nkwụghachi

400mV

Nkwụghachi oxygen saturation

8.25

Ihe mmetụta okpomọkụ
Nkeji ntinye ọnọdụ okpomọkụ na-akwụ ụgwọ
Ntụle ikuku nke efu
Ndozi
Ndozi mkpọmkpọ mkpọ mkpọda n'ubi

NTC2.252 k NTC10 k Pt 100 Pt 1000 0.0000 Akpaaka akwụkwọ ntuziaka oC of
Mmezi mmezi 1 mkpọda mkpọda 2 Mmezi mkpọda 1 mgbazi mkpọda 2

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Series
Ihe njikwa ikuku oxygen gbazere

Agba anọ 1

Oti mkpu

Agba anọ 2

Agba anọ 3

Mpụta

Ugbu a 1 dị ugbu a 2

24-0585 © Icon Process Controls Ltd.

On-Off State

Gbanyụọ

Oti mkpu dị elu

Ezipụta Ụdị Oti mkpu dị ala

Dị ọcha

Ntọala oke
(Oge mepere emepe - steeti nhicha)

Oge mmeghe na-aga n'ihu

Lag

Oge etiti n'etiti oghere ikpeazụ na mmechi

(Oge Oge - Na State Cleaning) na oghere ọzọ

On-Off State

Gbanyụọ

Oti mkpu dị elu

Ezipụta Ụdị Oti mkpu dị ala

Dị ọcha

Ntọala oke
(Oge mepere emepe - steeti nhicha)

Oge mmeghe na-aga n'ihu

Lag

Oge etiti n'etiti oghere ikpeazụ na mmechi

(Oge Oge - Na State Cleaning) na oghere ọzọ

On-Off State

Gbanyụọ

Oti mkpu dị elu

Ezipụta Ụdị Oti mkpu dị ala

Dị ọcha

Ntọala oke
(Oge mepere emepe - steeti nhicha)

Oge mmeghe na-aga n'ihu

Lag

Oge etiti n'etiti oghere ikpeazụ na mmechi

(Oge Oge - Na State Cleaning) na oghere ọzọ

Ọwa

Isi okpomọkụ

4-20mA

Nhọrọ mmepụta

0-20mA

Oke Oke Obere Oke
Ọwa
Nhọrọ mmepụta
Oke Oke Obere Oke

20-4mA
Isi okpomọkụ 4-20mA 0-20mA 20-4mA

ProCon® — DO3000-C Series
Ihe njikwa ikuku oxygen gbazere

Sistemụ ndekọ data mmepụta

4800BPS

Ọnụego Baud

9600BPS

19200BPS

Ọ dịghị

RS485

Nyochaa nha anya

Odi

Ọbụna

Kwụsị Bit

1 Bit 2 Bit

Ọnụ netwọk

001 +

Ogologo oge/Ntụaka

Usoro eserese (Chatịnụ na-ewu ewu)

1h/ Point 12h/ Point

Gosipụta dịka ntọala etiti oge siri dị isi 480 | ihuenyo

24h/ Point

Ajụjụ data

Afọ | Ọnwa | Ụbọchị

7.5s

Ogologo oge ndekọ

90s

180s

Ozi ebe nchekwa

176932 ntụaka

Mbupute data

Asụsụ

Bekee Chinese

Ụbọchị | Oge

Afọ-ọnwa-Ụbọchị Awa-Nkeji- Abụọ

Dị ala

Ngosipụta

Ngosipụta Ọsọ

Ọkọlọtọ Ọkara Elu

ọkụ azụ

Na-echekwa Bright

Ụdị ngwanrọ 1.9-1.0

Ntanụ ngwanrọ

Ntọala paswọọdụ 0000

Nọmba usoro n'usoro

Enweghị Factory Defactory
Ee

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Series
Ihe njikwa ikuku oxygen gbazere

Sistemu

Ntugharị ọnụ ugbu a
Nnwale ịgbagharị

1 4mA dị ugbu a 1 20mA dị ugbu a 2 4mA dị ugbu a 2 20mA dị ugbu a
Relay 1 Relay 2 Relay 3

A na-ejikọta njedebe dị mma na nke na-adịghị mma nke ammeter na njedebe 1 dị ugbu a ma ọ bụ 2 dị ugbu a nke ngwá ọrụ ahụ, pịa [] igodo iji dozie ugbu a na 4 mA ma ọ bụ 20mA, pịa igodo [ENT] iji gosi.
Họrọ otu atọ nke relays ma nụ ụda nke ngbanwe abụọ, ntụgharị ahụ bụ ihe nkịtị.

nhazi nhazi

Pịa [MENU] ka ịbanye ọnọdụ ntọala wee họrọ nhazi nhazi

Ọkọlọtọ calibration calibration
Nhazi nhazi

Anaerobic Calibration Air Calibration
Ndozi mkpọmkpọ mkpọ mkpọda n'ubi

Ọkọlọtọ Ngwọta Nhazi
Pịa igodo [ENT] iji kwado ma tinye ụkpụrụ nhazi nhazi ọkọlọtọ. Ọ bụrụ na edozila ngwa ahụ, ihuenyo ga-egosipụta ọkwa nhazi. Pịa igodo [ENT] ọzọ ka itinye nhazigharị ma ọ dị mkpa.
Ọ bụrụ na onye nleba anya kpaliri gị itinye paswọọdụ nchekwa calibration, pịa [] ma ọ bụ [] igodo ka ịtọọ paswọọdụ nchekwa calibration, wee pịa [ENT] iji kwado paswọọdụ nchekwa calibration.

Anaerobic calibration
Mgbe ịbanye na nhazi nhazi, ihe ngosi ngwá ọrụ dị ka egosiri na foto a. A na-etinye electrode n'ime mmiri anaerobic na-enweghị okpu shading.
A ga-egosipụta uru "signal" kwekọrọ na akuku aka ekpe elu nke ihuenyo ahụ. Mgbe uru “signal” kwụsiri ike, pịa [ENT] iji gosi.
N'oge usoro nhazi, akụkụ aka nri nke ihuenyo ga-egosipụta ọkwa nhazi.
Emeela = nhazigharị gara nke ọma.
· Nhazi = nhazigharị na-aga n'ihu.
· Err = mmezi dara ada.
Ka emechara nhazi nhazi, pịa igodo [MENU] ka ịlaghachi na menu ka elu.

Anaerobic 0 mg / l

Nhazi

Fluorescence agbazere oxygen

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Series
Ihe njikwa ikuku oxygen gbazere

Nhazi ikuku
Mgbe ịbanye na nhazi nhazi, ihe ngosi ngwá ọrụ dị ka egosiri na foto a. Tinye DO electrode n'ikuku na okpu shading.
A ga-egosipụta uru "signal" kwekọrọ na akuku aka ekpe elu nke ihuenyo ahụ. Mgbe uru “signal” kwụsiri ike, pịa [ENT] iji gosi.
N'oge usoro nhazi, akụkụ aka nri nke ihuenyo ga-egosipụta ọkwa nhazi.
Emeela = nhazigharị gara nke ọma.
· Nhazi = nhazigharị na-aga n'ihu.
· Err = mmezi dara ada.
Ka emechara nhazi nhazi, pịa igodo [MENU] ka ịlaghachi na menu ka elu.

Ikuku 8.25 mg/L

Nhazi

Fluorescence agbazere oxygen

Nhazi nhazi
Họrọ ụzọ nhazi nhazi na saịtị: [Linear calibration], [Offset mmezi], [Linear mmezi].
Ndozi Ubi Mgbe etinyere data sitere na ụlọ nyocha ma ọ bụ ngwa mkpanaka n'ime ihe a, ngwa ahụ ga-edozi data ahụ ozugbo.

Mpaghara Calibratio

Nhazi

SP1

SP3

Fluorescence agbazere oxygen

Nsonaazụ ngbanwe kwenye: Mgbe akara ngosi “ENT” bụ Green, pịa [ENT] iji gosi. Kagbuo: Pịa igodo [ ] ka ịgbanwee akara ngosi Green gaa ESC, wee pịa [ENT] iji kwado.
Ndozi ihe nkwụghachi atụnyere data sitere na ngwaọrụ mkpanaka na data ejiri ngwa tụọ. Ọ bụrụ na enwere njehie ọ bụla, data njehie nwere ike gbanwee site na ọrụ a.
A ga-echekwa ụkpụrụ ahịrị ahịrị ka emechara “mmezi nhazi mpaghara” n'okwu a yana data ụlọ ọrụ bụ 1.00.

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Series
Ihe njikwa ikuku oxygen gbazere

Usoro eserese (Chatịnụ na-ewu ewu)

Ndekọ data

Ajụjụ Curve (Chart Trend)
Ogologo oge ajụjụ data

Ogologo oge/Ntụaka
1h/akara
12h/akara
24h / nkeji Afọ / ọnwa / ụbọchị
7.5s 90s 180s

Isi 400 kwa ihuenyo, na-egosiputa eserese data na-adịbeghị anya dịka ntọala etiti oge si dị
Isi ihe 400 kwa ihuenyo, gosipụta eserese omume nke ụbọchị 16 ikpeazụ nke data
Isi ihe 400 kwa ihuenyo, gosipụta eserese omume nke ụbọchị 200 ikpeazụ nke data
Isi ihe 400 kwa ihuenyo, gosipụta eserese omume nke ụbọchị 400 ikpeazụ nke data
Afọ/ọnwa/ụbọchị: nkeji: nkeji uru nke abụọ
Na-echekwa data kwa sekọnd 7.5 ọ bụla
Na-echekwa data kwa sekọnd 90 ọ bụla
Na-echekwa data kwa sekọnd 180 ọ bụla

Pịa bọtịnụ [MENU] laghachi na ihuenyo nha. Pịa bọtịnụ [ /TREND] na ọnọdụ nha ka view eserese omume nke data echekwara ozugbo. Enwere usoro ndekọ data 480 kwa ihuenyo, na oge etiti oge nke ndekọ ọ bụla nwere ike ịhọrọ [7.5s, 90s, 180s), kwekọrọ na data egosipụtara na [1h, 12h, 24h] kwa ihuenyo.

Fluorescence agbazere oxygen
N'ọnọdụ dị ugbu a, pịa igodo [ENT] ka ibugharịa ahịrị ngosi data gaa n'aka ekpe na aka nri (akwụkwọ ndụ akwụkwọ ndụ) wee gosipụta data ahụ n'akụkụ aka ekpe na aka nri. Ịpị ogologo mkpịsị ugodi [ENT] nwere ike mee ka mbugharị. (Mgbe akara ngosi ala bụ akwụkwọ ndụ akwụkwọ ndụ. Igodo [ENT] bụ ntụzịaka mbugharị, pịa igodo [/TREND] ka ịgbanwee ntụzịaka nke mbugharị)

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Series
Ihe njikwa ikuku oxygen gbazere

MODBUS RTU
Nọmba ụdị ngwaike nke akwụkwọ a bụ V2.0; nọmba ụdị software bụ V5.9 na n'elu. Akwụkwọ a na-akọwa MODBUS RTU interface n'ụzọ zuru ezu na ihe ebumnuche bụ onye mmemme software.
Ụkpụrụ Iwu MODBUS
Nkọwa usoro data na akwụkwọ a; Ngosipụta ọnụọgụ abụọ, suffix B, maka example: 10001B – ngosi ihe ngosi iri, na-enweghị prefix ma ọ bụ suffix ọ bụla, maka example: 256 hexadecimal ngosi, prefix 0x, maka example: 0x2A ASCII agwa ma ọ bụ ASCII eriri ngosi, maka example: "YL0114010022"
Ụkpụrụ Iwu Usoro ngwa MODBUS na-akọwapụta Ngalaba Data Protocol dị Mfe (PDU), nke na-anọghị na oyi akwa nkwurịta okwu dị n'okpuru.

Koodu ọrụ

Data

Fig.1: Ngalaba Data Protocol MODBUS
Usoro ụkpụrụ MODBUS n'otu ụgbọ ala ma ọ bụ netwọkụ na-ewebata mpaghara ọzọ nke nkeji data protocol. Onye ahịa na-amalite mgbanwe MODBUS na-emepụta MODBUS PDU, wee gbakwunye ngalaba iji guzobe PDU nkwurịta okwu ziri ezi.

Ubi ubi

MODBUS Oghere Usoro PDU

Koodu ọrụ

Data

CRC

MODBUS PDU
Fig.2: MODBUS Architecture maka Oghere Usoro Nkwukọrịta

Na ahịrị usoro MODBUS, ngalaba adreesị nwere naanị adreesị ngwá ọrụ ohu. Ndụmọdụ: Oke adreesị ngwaọrụ bụ 1…247 Tọọ adreesị ngwaọrụ nke ohu ahụ n'ọhịa adresị arịrịọ nke onye ọbịa zitere. Mgbe ngwá ọrụ ohu ahụ zaghachiri, ọ na-edobe adres ngwá ọrụ ya na mpaghara adrees nke etiti nzaghachi ka onyeisi ụlọ ọrụ mara nke ohu na-aza.
Koodu ọrụ na-egosi ụdị ọrụ sava ahụ rụrụ. Ngalaba CRC bụ nsonaazụ nke "nleba ụgwọ ọrụ" nke a na-eme dịka ọdịnaya ozi siri dị.

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Series
Ihe njikwa ikuku oxygen gbazere

Ụdị nnyefe MODBUS RTU

Mgbe akụrụngwa na-eji ọnọdụ RTU (Remote Terminal Unit) maka nkwurịta okwu usoro MODBUS, ozi 8-bit ọ bụla nwere mkpụrụedemede hexadecimal abụọ 4-bit. Isi advantages nke a mode bụ ukwuu agwa njupụta na mma data throughput karịa ASCII mode na otu baud ọnụego. A ga-ebunye ozi ọ bụla dịka eriri na-aga n'ihu.
Usoro nke byte ọ bụla na ọnọdụ RTU (bit 11): Sistemụ ntinye: 8-bit ọnụọgụ abụọ ọ bụla 8-bit byte n'ime ozi nwere mkpụrụedemede hexadecimal abụọ 4-bit (0-9, AF) na byte ọ bụla: 1 mmalite bit.
8 data ibe n'ibe, nke mbụ opekempe dị irè na-enweghị mkpirisi ego ibe n'ibe 2 nkwụsị ibe n'ibe Ọnụ Baud: 9600 BPS Otu esi ebufe mkpụrụedemede n'usoro:
A na-eziga mkpụrụedemede ma ọ bụ byte ọ bụla n'usoro a (site n'aka ekpe gaa n'aka nri) ntakịrị ntakịrị ntakịrị (LSB)… Oke kacha mkpa (MSB)

Malite bit 1 2 3 4 5 6 7 8 Kwụsị ntakịrị Kwụsị ntakịrị
Fig.3: Usoro RTU Ụdị Bit

Lelee Nhazi ngalaba: Nleba anya redundancy cyclic (CRC16) nkọwa nhazi:

Ngwá Ọrụ Ohu

Koodu ọrụ

Data

Adreesị

1 byte

0…252 byte

Fig.4 : RTU Ozi Ọdịdị

CRC 2 byte CRC obere byte | Nnukwu byte CRC

Oke okpokolo agba nke MODBUS bụ 256 bytes MODBUS RTU Ozi Frame N'ụdị RTU, a na-amata okpokolo agba ozi site na oge na-adịghị arụ ọrụ nke opekata mpe 3.5 agwa, nke a na-akpọ t3.5 na ngalaba na-esote.

Frame 1

Frame 2

Frame 3

3.5 bytes
Malite 3.5 bytes

3.5 bytes

Koodu ọrụ adreesị

3.5 bytes

4.5 bytes

Data

CRC

Nx8

16 bit

Fig.5: Frame Ozi RTU

Ọgwụgwụ 3.5 bytes

Ekwesịrị izipu etiti ozi niile na iyi agwa na-aga n'ihu. Mgbe oge nkwụsịtụ n'etiti mkpụrụedemede abụọ gafere mkpụrụedemede 1.5, a na-ewere etiti ozi ahụ ezughị oke yana onye nnata anaghị enweta etiti ozi.

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Series
Ihe njikwa ikuku oxygen gbazere

Frame 1 nkịtị

Frame 2 mmejọ

<1.5 bytes

> 1.5 bytes

Fig.6: MODBUS RTU CRC Lelee

Ụdị RTU nwere ngalaba nchọpụta njehie dabere na algọridim nyocha cyclic redundancy check (CRC) na-arụ ọrụ na ọdịnaya ozi niile. Ngalaba CRC na-enyocha ọdịnaya nke ozi ahụ dum wee na-eme nlele a n'agbanyeghị ma ozi ahụ nwere nlele nleba anya n'enweghị usoro. Ngalaba CRC nwere uru 16-bit nke nwere bytes abụọ 8-bit. A nakweere nlele CRC16. Obere bytes na-ebute ụzọ, nnukwu bytes na-ebute ụzọ.

Mmejuputa MODBUS RTU n'ime akụrụngwa

Dịka nkọwapụta MODBUS gọọmentị siri dị, iwu a na-amalite site na nkeji nkeji 3.5 na-akpalite iwu, na njedebe nke iwu a na-anọchi anya ya site na nkeji mkpụrụedemede 3.5. Adreesị ngwaọrụ na koodu ọrụ MODBUS nwere 8 bit. Ụdọ data nwere n * 8 bits, na eriri data nwere adreesị mmalite nke ndekọ na ọnụ ọgụgụ nke ịgụ / dee ndekọ. Nyocha CRC bụ 16 bit.

Uru

Malite

Ọrụ adreesị ngwaọrụ

Data

Enweghị akara ngosi n'oge mkpụrụedemede 3.5

Byte

3.5

1-247 1

Koodu ọrụ
Na-akwado MODBUS
Nkọwapụta

Data
Na-akwado MODBUS
Nkọwapụta

Fig.7: MODBUS nkọwa nke nnyefe data

Nyochaa nchịkọta

Ọgwụgwụ

Enweghị bytes mgbaàmà

CRCL CRCL

n'oge 3.5

agwa

3.5

Ngwa MODBUS RTU Usoro Ọrụ
Ngwa ahụ na-eji naanị koodu ọrụ MODBUS abụọ: 0x03: Ndebanye aha na-agụ ma jide 0x10: Dee ọtụtụ ndekọ.
Koodu ọrụ MODBUS 0x03: Ịgụ-na-jide Ndebanye aha a na-eji koodu ọrụ a na-agụ ọdịnaya mgbochi na-aga n'ihu nke ndebanye aha nke ngwaọrụ dịpụrụ adịpụ. Rịọ PDU ka ọ kọwaa adreesị mmalite aha na ọnụọgụ ndekọ. A na-edebanye aha adreesị site na efu. Ya mere, ndekọ adreesị 1-16 bụ 0-15. A na-etinye data ndekọ aha na ozi nzaghachi na bytes abụọ n'akwụkwọ ndekọ aha. Maka ndebanye aha ọ bụla, byte nke mbụ nwere nnukwu bits na byte nke abụọ nwere obere ibe n'ibe. Arịrịọ:

Koodu ọrụ

1 byte

0x03

Malite adreesị

2 byte

0x0000….0xffff

Gụọ Nọmba Ndebanye aha

2 byte Fig.8 : Gụọ na jide aha arịrịọ frame

1…125

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Series
Ihe njikwa ikuku oxygen gbazere

Azịza ya:

Koodu ọrụ

1 byte

0x03

Ọnụọgụ bytes

2 bytes

0x0000….0xffff

Gụọ Nọmba Ndebanye aha

2 bytes

1…125

N = Nọmba ndekọ

Ọgụgụ 9: Gụọ ma jide etiti nzaghachi ndekọ aha

Ihe ndị a na-egosi etiti arịrịọ na etiti nzaghachi site na ịgụ ma jide ndekọ 108-110 dị ka onye bụbuample. (A na-agụ naanị ọdịnaya nke ndekọ 108, yana ụkpụrụ byte abụọ nke 0X022B, yana ọdịnaya nke ndebanye aha 109-110 bụ 0X0000 na 0X0064)

Arịrịọ Frame

Sistemu ọnụọgụgụ
Koodu ọrụ
Adreesị mmalite (High byte)
Adreesị mmalite (obere byte)
Ọnụọgụ nke ndị debanyere aha (High Bytes)
Ọnụọgụ nke ndị debanyere aha (Byte dị ala)

(Hexadecimal) 0x03 0x00 0x6B 0x00
0x03

Okpokoro nzaghachi

Nọmba Sistemu Ọrụ Koodu Byte Count
Deba aha uru (High Bytes) (108)

(Hexadecimal) 0x03 0x06 0x02

Deba aha bara uru (Byte dị ala) (108)

0X2B

Deba aha uru (High Bytes) (109)
Deba aha uru (Obere Bytes) (109) Deba aha bara uru (High Bytes) (110) Deba aha uru (obere Bytes) (110)

0x00
0x00 0x00 0x64

Ọgụgụ 10: Examples nke ịgụ na jide ndekọ arịrịọ na okpokolo agba nzaghachi

Koodu ọrụ MODBUS 0x10: Dee ọtụtụ ndebanye aha

A na-eji koodu ọrụ a dee ndekọ na-aga n'ihu na ngwaọrụ ndị dịpụrụ adịpụ (1… 123 ndekọ) ngọngọ nke na-akọwa uru ndekọ aha edere na etiti data arịrịọ. A na-akwakọba data na bytes abụọ maka ndebanye aha. Koodu ọrụ nkwụghachi nke etiti nzaghachi, adreesị mmalite na ọnụọgụ ndekọ edere.
Arịrịọ:

Koodu ọrụ

1 byte

0x10

Malite adreesị

2 byte

Ọnụọgụ ndebanye aha ndenye

2 byte

Ọnụọgụ bytes

1 byte

Deba aha ụkpụrụ

N x 2 bytes

Fig.11: Dee Frames arịrịọ ọtụtụ ndebanye aha

*N = Nọmba ndekọ

24-0585 © Icon Process Controls Ltd.

ProCon® — DO3000-C Series
Ihe njikwa ikuku oxygen gbazere

Azịza ya:

Koodu ọrụ

1 byte

0x10

Malite adreesị

2 byte

0x0000….0xffff

Nọmba ndebanye aha

2 byte

1… 123 (0x7B)

N = Nọmba ndekọ

Ọgụgụ 12: Dee Frames nzaghachi nke ọtụtụ ndebanye aha

E gosiputara etiti arịrịọ na etiti nzaghachi n'okpuru na ndekọ abụọ na-ede ụkpụrụ 0x000A na 0x0102 na adreesị mmalite nke 2.

Arịrịọ Frame

(hexadecimal)

Okpokoro nzaghachi

(hexadecimal)

Koodu Ọrụ Sistemu Ọgụgụ
Adreesị Mmalite (High byte dị elu) Adreesị Mmalite (Obere byte) Nọmba Ndebanye aha Ntinye (High bytes) Nọmba Ndebanye aha Ntinye (Obere bytes)
Ọnụọgụ nke bytes Deba aha bara uru (High byte) Ọnụ ahịa ndebanye aha (Obere byte) Uru edebanye aha (Obere byte dị elu) Ọnụ ahịa aha (Obere byte)

0x10 0x00 0x01 0x00 0x02 0x04 0x00 0x0A 0x01 0x02

Koodu Ọrụ Sistemu Ọgụgụ
Adreesị Mmalite (High byte dị elu) Adreesị Mmalite (Obere byte) Nọmba Ndebanye aha Ntinye (High bytes) Nọmba Ndebanye aha Ntinye (Obere bytes)

0x10 0x00 0x01 0x00 0x02

Ọgụgụ 13: Examples nke ide otutu ndebanye arịrịọ na nzaghachi okpokolo agba

Usoro data na Ngwa

Nkọwapụta Ebe Na-ese n'elu mmiri: Ebe na-ese n'elu mmiri, kwekọrọ na IEEE 754 (ezigbo otu)

Nkọwa

Akara

Index

Mantissa

Bit

30…23

22…0

Ngbanwe Index

127

Ọgụgụ 14: Nkọwapụta otu nke ziri ezi nke Floating Point (4 bytes, 2 MODBUS ndekọ)

SUM 22…0

ProCon® — DO3000-C Series
Ihe njikwa ikuku oxygen gbazere
Example: Chịkọta ọnụ ọgụgụ 17.625 ka ọ bụrụ ọnụọgụ abụọ Nzọụkwụ 1: Ịtụgharị 17.625 n'ụdị ntụpọ ka ọ bụrụ ọnụ ọgụgụ na-ese n'elu mmiri n'ụdị ọnụọgụ abụọ, buru ụzọ chọpụta ọnụọgụ abụọ nke akụkụ 17decimal = 16 + 1 = 1 × 24 + 0 × 23 + 0 × 22 + 0×21 + 1×20 Ihe nnochite anya ọnụọgụ abụọ nke akụkụ integer 17 bụ 10001B Mgbe ahụ, a na-enweta ihe ngosi ọnụọgụ abụọ nke akụkụ iri 0.625 = 0.5 + 0.125 = 1 × 2-1 + 0 × 2-2 + 1 × 2-3 Ihe ngosi ọnụọgụ abụọ nke akụkụ iri 0.625 bụ 0.101B. Ya mere ọnụọgụ abụọ na-ese n'elu mmiri nke 17.625 n'ụdị ngụ iri bụ 10001.101B Nzọụkwụ 2: Gbanwee ịchọta ihe nrịbama. Bugharịa 10001.101B n'aka ekpe ruo mgbe enwere naanị otu ntụpọ, na-ebute 1.0001101B, na 10001.101B = 1.0001101 B× 24 . Ya mere akụkụ nkọwa bụ 4, gbakwunyere 127, ọ na-aghọ 131, na ọnụọgụ abụọ ya bụ 10000011B. Kwụpụ 3: Gbakọọ ọnụ ọgụgụ ọdụ Mgbe ewepụchara 1 n'ihu ntụpọ ntụpọ nke 1.0001101B, ọnụ ọgụgụ ikpeazụ bụ 0001101B (n'ihi na tupu ntụpọ ntụpọ ga-abụ 1, yabụ IEEE kwuru na ọ bụ naanị ntụpọ n'azụ nwere ike ịdekọ). Maka nkọwa dị mkpa nke 23-bit mantissa, nke mbụ (ya bụ bit zoro ezo) achịkọtaghị. Iberibe ezoro ezo bụ ibe n'akụkụ aka ekpe nke onye nkewa, nke a na-edobekarị na 1 ma mechie ya. Kwụpụ 4: Nkọwa bit Symbol Obere akara nke nọmba ziri ezi bụ 0, na akara ọnụọgụ nke na-adịghị mma bụ 1, yabụ ntakịrị akara nke 17.625 bụ 0. Nzọụkwụ 5: Tụgharịa gaa na akara n'elu mmiri 1 akara bit + 8 bit index + 23-bit mantissa 0 10000011 00011010000000000000000B A na-egosi usoro hexadecimal dị ka 0 x418d0000 ) Koodu nrụtụ aka: 1. Ọ bụrụ na nchịkọta nke onye ọrụ nwere ọrụ ọbá akwụkwọ na-arụ ọrụ a, enwere ike ịkpọ ọrụ ọbá akwụkwọ ozugbo, maka ex.ample, iji asụsụ C, mgbe ahụ ị nwere ike ịkpọ ọrụ ọbá akwụkwọ C ozugbo memcpy iji nweta nnochite anya integer nke usoro nchekwa ihe na-ese n'elu mmiri na ebe nchekwa. Maka example: sere n'elu floatdata; // tụgharịrị nọmba n'elu mmiri efu * outdata; memcpy (outdata, & floatdata, 4); Were ya na floatdata = 17.625 Ọ bụrụ na ọ bụ ọnọdụ nchekwa obere njedebe, mgbe emechara nkwupụta ahụ dị n'elu, data echekwara na ngalaba adreesị outdata bụ 0x00. Outdata + 1 na-echekwa data dị ka 0x00 adreesị unit (outdata + 2) na-echekwa data dị ka 0x8D adreesị unit (outdata + 3) na-echekwa data dị ka 0x41 Ọ bụrụ na ọ bụ nnukwu-njedebe nchekwa mode, mgbe emechara nkwupụta n'elu, data echekwara na outdata nke adreesị unit bụ 0x41 adreesị unit (outdata + 1) na-echekwa data dị ka 0x8D adreesị unit (outdata + 2) na-echekwa data dị ka 0x00 adreesị unit (outdata + 3) na-echekwa data dị ka 0x00 2. Ọ bụrụ na nchịkọta nke onye ọrụ anaghị emejuputa ọrụ ọbá akwụkwọ nke ọrụ a, enwere ike iji ọrụ ndị a iji nweta ọrụ a:

ProCon® — DO3000-C Series
Ihe njikwa ikuku oxygen gbazere

void memcpy(void *dest,void *src,int n) {

char *pd = (char *)dest; char *ps = (akara *)src;

maka (int i=0;i

Mgbe ahụ kpọọ oku na memcpy dị n'elu (outdata,&floatdata,4);

Example: Chịkọta ọnụọgụ abụọ na-ese n'elu mmiri 0100 0010 0111 1011 0110 0110 0110 10B ruo nọmba iri.
Kwụpụ 1: Kewaa ọnụọgụ abụọ na-ese n'elu mmiri 0100 0010 0111 1011 0110 0110 0110B n'ime ihe nrịbama, bit exponential na mantissa bit.

0 10000100

11110110110011001100110B

Ihe nrịbama 1-bit + 8-bit index + 23-bit akara akara bit S: 0 na-egosi ọnụọgụ ziri ezi Ọnọdụ Index E: 10000100B = 1 × 27+0 × 26+0 × 25+0 × 24 + 0 × 23+1 × 22+0×21+0×20 =128+0+0+0+0+4+0=0

Mantissa iberi M: 11110110110011001100110B =8087142

Kwụpụ 2: Gbakọọ ọnụọgụgụ iri

D = (-1) × (1.0 + M/223) × 2E-127

= (-1) 0× (1.0 + 8087142/223)×2132-127 = 1×1.964062452316284×32

= 62.85

Koodu ntụaka:

sere n'elu TOdecimal (ogologo int byte0, ogologo int byte1, ogologo int byte2, ogologo int byte3)

ogologo int realbyte0,realbyte1,realbyte2,realbyte3; agba S;

ogologo int E,M;

sere n'elu D; realbyte0 = byte3; realbyte1 = byte2; realbyte2 = byte1; realbyte3 = byte0;

ọ bụrụ ((realbyte0&0x80)==0) {

S = 0;// nọmba ziri ezi }

ọzọ

{

S = 1;// nọmba adịghị mma }

E = ((realbyte0<<1)|(realbyte1&0x80)>>7)-127;

M = ((realbyte1&0x7f) << 16) | (realbyte2 << 8)| realbyte3;

D = pow (-1, S)*(1.0 + M/pow(2,23))* pow(2,E);

laghachi D; }

Nkọwa ọrụ: parameters byte0, byte1, byte2, byte3 na-anọchi anya 4 bytes nke ọnụọgụ abụọ na-ese n'elu mmiri.

Atụgharịrị ọnụọgụ iri site na uru nloghachi.

Maka exampN'ikpeazụ, onye ọrụ na-eziga iwu iji nweta uru okpomọkụ yana uru oxygen gbazere na nyocha. Bytes 4 na-anọchi anya uru okpomọkụ dị na etiti nzaghachi anatara bụ 0x00, 0x00, 0x8d na 0x41. Mgbe ahụ onye ọrụ nwere ike nweta ọnụọgụgụ ọnụọgụgụ nke uru okpomọkụ kwekọrọ site na nkwupụta oku na-esonụ.
Nke ahụ bụ okpomọkụ = 17.625.

Okpomọkụ n'elu mmiri = sere n'eluTOdecimal (0x00, 0x00, 0x8d, 0x41)

ProCon® — DO3000-C Series
Ihe njikwa ikuku oxygen gbazere

Gụọ ụkpụrụ ntuziaka
Protocol nzikọrịta ozi nakweere ụkpụrụ MODBUS (RTU). Enwere ike ịgbanwe ọdịnaya na adreesị nke nkwukọrịta dịka mkpa ndị ahịa si dị. Nhazi ndabara bụ adreesị netwọk 01, ọnụego baud 9600, ọbụna lelee, otu nkwụsịtụ, ndị ọrụ nwere ike ịtọ mgbanwe nke ha; Koodu ọrụ 0x04: Ọrụ a na-enyere onye ọbịa ahụ aka inweta nha ozugbo site n'aka ndị ohu, nke akọwapụtara dị ka ụdị ihe na-ese n'elu mmiri (ya bụ iji adreesị ndekọ aha abụọ n'usoro), na iji adreesị ndekọ dị iche iche kaa akara ndị kwekọrọ. Adreesị nzikọrịta ozi bụ nke a:
0000-0001: Uru okpomọkụ | 0002-0003: Isi Uru Atụtara | 0004-0005: Okpomọkụ na Voltage Uru |
0006-0007: Isi Voltage Uru nzikọrịta ozi exampihe: Examples nke koodu ọrụ 04 ntuziaka: adreesị nkwukọrịta = 1, okpomọkụ = 20.0, uru ion = 10.0, okpomọkụ vol.tage = 100.0, ion voltage = 200.0 Onye ọbịa na-eziga: 01 04 00 00 08 F1 CC | Azịza ohu: 01 04 10 00 41 A0 00 41 20 00 42 C8 00 43 48 81 E8 Rịba ama: [01] Na-anọchite anya adreesị nkwurịta okwu ngwá ọrụ; [04] Na-anọchi anya koodu ọrụ 04; [10] na-anọchi anya 10H (16) data byte; [00 00 00 41 A0] = 20.0; / uru okpomọkụ [00 00 4120] = 10.0; // Isi Ọnụ Ahịa [00 00 42 C8] = 100.0; // Okpomọkụ na Voltage Uru [00 00 43 48] = 200.0; // Isi tụrụ voltage uru [81 E8] na-anọchite anya koodu nlele CRC16;

Okpokoro saturation oxygen n'okpuru okpomọkụ dị iche iche

°F | Celsius C

mg/l

°F | Celsius C

mg/l

°F | Celsius C

mg/l

32 | 0

14.64

57 | 14

10.30

82 | 28

7.82

34 | 1

14.22

59 | 15

10.08

84 | 29

7.69

34 | 2

13.82

61 | 16

9.86

86 | 30

7.56

37 | 3

13.44

62 | 17

9.64

88 | 31

7.46

39 | 4

13.09

64 | 18

9.46

89 | 32

7.30

41 | 5

12.74

66 | 19

9.27

91 | 33

7.18

43 | 6

12.42

68 | 20

9.08

93 | 34

7.07

44 | 7

12.11

70 | 21

8.90

95 | 35

6.95

46 | 8

11.81

71 | 22

8.73

97 | 36

6.84

48 | 9

11.53

73 | 23

8.57

98 | 37

6.73

50 | 10

11.26

75 | 24

8.41

100 | 38

6.63

52 | 11

11.01

77 | 25

8.25

102 | 39

6.53

53 | 12 55 | 13

10.77 10.53

79 | 26 80 | 27

8.11 7.96

Mara: Tebụl a sitere na mgbakwunye C nke JJG291 – 1999.

Enwere ike gbakọọ ọdịnaya oxygen gbazere na nrụgide ikuku dị iche iche dị ka ndị a.

A3=

PA·101.325

Na usoro N'ime usoro: As- Solubility nke ikuku ikuku na P (Pa); A- Solubility na nrụgide ikuku nke 101.325 (Pa);

P- nrụgide, Pa.

ProCon® — DO3000-C Series
Ihe njikwa ikuku oxygen gbazere

Nlekọta
Dị ka ihe achọrọ iji mee ihe, ọnọdụ ntinye na ọnọdụ ọrụ nke ngwá ọrụ dị mgbagwoju anya. Iji hụ na ngwá ọrụ ahụ na-arụ ọrụ nke ọma, ndị ọrụ nlekọta kwesịrị ịrụ ọrụ na-arụ ọrụ mgbe niile. Biko ṅaa ntị n'ihe ndị a n'oge mmezi:
Lelee ebe ọrụ nke ngwá ọrụ. Ọ bụrụ na okpomoku karịrị ogo akụrụngwa, biko mee ihe kwesịrị ekwesị; ma ọ bụghị ya, ngwá ọrụ ahụ nwere ike imebi ma ọ bụ belata ndụ ọrụ ya;
Mgbe ị na-ehicha shea rọba nke akụrụngwa, biko jiri akwa dị nro na ihe nhicha dị nro hichaa shea ahụ. Lelee ma wiwi dị na njedebe nke ngwá ọrụ ahụ siri ike. Lezienụ anya ka ịkwupụ ike AC ma ọ bụ DC
tupu iwepu mkpuchi wiring.

Ntọala ngwugwu

Nkọwa ngwaahịa

Ọnụọgụ

1) T6046 Fluorescence Online Oxygen Mita agbazere

2) Ngwa Ngwa Nwụnye Ngwa

3) Akwụkwọ ntuziaka ọrụ

4) Asambodo iru eru

Mara: Biko lelee ngwa ngwa tupu ejie ya.

Usoro nyocha nke ụlọ ọrụ ndị ọzọ, biko banye na anyị websaịtị maka ajụjụ.

ProCon® — DO3000-C Series
Ihe njikwa ikuku oxygen gbazere
Akwụkwọ ikike, nloghachi na oke
Akwụkwọ ikike
Icon Process Controls Ltd nyere onye zụrụ ngwaahịa ya ikike na ngwaahịa ndị dị otú ahụ agaghị enwe ntụpọ na akụrụngwa na arụ ọrụ n'okpuru ojiji yana ọrụ dịka ntuziaka nke Icon Process Controls Ltd nyere maka otu afọ site na ụbọchị ire ere. nke ngwaahịa ndị dị otú ahụ. Ọrụ Icon Process Controls Ltd dị n'okpuru akwụkwọ ikike a bụ naanị naanị na nrụzi ma ọ bụ nnọchi, na nhọrọ Icon Process Controls Ltd, nke ngwaahịa ma ọ bụ akụrụngwa, nke nyocha Icon Process Controls Ltd na-ekpebi na afọ ojuju ya nwere nkwarụ na ihe ma ọ bụ arụ ọrụ n'ime. oge ikike. A ga-agwarịrị Icon Process Controls Ltd dị ka ntuziaka dị n'okpuru maka nkwupụta ọ bụla n'okpuru akwụkwọ ikike a n'ime ụbọchị iri atọ (30) nke enweghị nkwekọrịta ngwaahịa a. Ngwaahịa ọ bụla arụziri n'okpuru akwụkwọ ikike a ga-enwe ikike maka naanị oge akwụkwọ ikike fọdụrụnụ. Ngwaahịa ọ bụla enyere dị ka nnọchi n'okpuru akwụkwọ ikike a ga-enwe ikike maka otu afọ site na ụbọchị nnọchi.
Na-alaghachi
Enweghị ike iweghachite ngwaahịa na Icon Process Controls Ltd na-enweghị ikike mbụ. Iji weghachi ngwaahịa echere na ọ nwere ntụpọ, gaa na www.iconprocon.com, ma nyefee akwụkwọ arịrịọ nloghachi ndị ahịa (MRA) wee soro ntuziaka dị n'ime ya. A ga-ebupu akwụkwọ ikike niile na ngwaahịa na-abụghị akwụkwọ ikike na-alaghachi na Icon Process Controls Ltd. Icon Process Controls Ltd agaghị abụ maka ngwaahịa ọ bụla furu efu ma ọ bụ mebie na mbupu.
Oke
Akwụkwọ ikike a anaghị emetụta ngwaahịa ndị: 1. gafere oge ikike ma ọ bụ bụ ngwaahịa nke onye zụrụ ahịa mbụ anaghị agbaso usoro akwụkwọ ikike.
e depụtara n'elu; 2. e mebiela eletriki, igwe ma ọ bụ kemịkalụ n'ihi ojiji na-ekwesịghị ekwesị, mberede ma ọ bụ nleghara anya; 3. agbanweela ma ọ bụ gbanwee; 4. Onye ọ bụla na-abụghị ndị ọrụ ọrụ ikike nke Icon Process Controls Ltd nwara imezi; 5. etinyela aka na ihe mberede ma ọ bụ ọdachi; ma ọ bụ 6. mebiri emebi n'oge mbupu na Icon Process Controls Ltd
Icon Process Controls Ltd nwere ikike ịwepụ akwụkwọ ikike a n'otu akụkụ ma tụfuo ngwaahịa ọ bụla eweghachiri na Icon Process Controls Ltd ebe: 1. enwere ihe akaebe nke ihe nwere ike ịdị ize ndụ dị na ngwaahịa ahụ; 2. ma ọ bụ ngwaahịa ahụ anabataghị ya na Icon Process Controls Ltd ihe karịrị ụbọchị 30 ka Icon Process Controls Ltd gasịrị.
ejirila obi eziokwu rịọrịọ ọnọdụ.
Akwụkwọ ikike a nwere naanị akwụkwọ ikike ngwa ngwa nke Icon Process Controls Ltd mere na ngwaahịa ya. KWESỊRỊ NIILE KWESỊRỊ, GỤNYERE ENWEGHỊ OKWU, KWESỊRỊ nke Ịzụ ahịa na Mma maka ebumnuche pụrụ iche, ka a na-akatọ ya nke ukwuu. Ngwọta nke nrụzi ma ọ bụ ngbanwe dịka ekwuru n'elu bụ ọgwụgwọ pụrụ iche maka mmebi nke akwụkwọ ikike a. Ọ BỤGHỊ ihe omume, njikwa njikwa akara ngosi Ltd ga-akwụ ụgwọ maka mmebi iwu ọ bụla ma ọ bụ ihe ọ bụla metụtara nke gụnyere ihe nkeonwe ma ọ bụ ezigbo ihe onwunwe ma ọ bụ maka mmerụ ahụ onye ọ bụla. Akwụkwọ ikike a bụ nke ikpeazụ, zuru ezu na nke naanị ya, ọ nweghịkwa onye enyere ikike ịme ikike ma ọ bụ nnochite anya ọ bụla n'ọnọdụ Icon Process Controls Ltd. Akwụkwọ ikike a ga-atụgharị n'iwu nke Ontario.
Ọ bụrụ na ejidere akụkụ ọ bụla nke akwụkwọ ikike a ka ọ bụrụ ihe na-adịghị mma ma ọ bụ enweghị ike ime ya n'ihi ihe ọ bụla, nchọpụta dị otú ahụ agaghị emebi onyinye ọ bụla ọzọ nke akwụkwọ ikike a.
Maka akwụkwọ ngwaahịa ọzọ na nkwado teknụzụ gaa:
www.iconprocon.com | e-mail: sales@iconprocon.com ma ọ bụ support@iconprocon.com | Ph: 905.469.9283

Akwụkwọ / akụrụngwa

Njikwa usoro ICON DO3000-C Series gbazere ikuku oxygen [pdf] Ntuziaka onye ọrụ
DO3000-C Series Mgbasa Oxygen Controller, DO3000-C Series, Oxygen Controller gbazere, Oxygen Controller, Njikwa

Ntụaka

Akwụkwọ ntuziaka onye ọrụ

Ihe njikwa oxygen gbazere DO3000-C

Nkọwapụta

Nkọwa ngwaahịa

Ntuziaka nwụnye

Ntinye agbakwunyere

Nwụnye mgbidi mgbidi

Ntuziaka wiring

Ajụjụ A na-ajụkarị (FAQ)

Ajụjụ: Kedu ihe m ga-eme ma ọ bụrụ na ngwaọrụ ahụ gosipụtara ozi mperi?

Ajụjụ: Ugboro ole ka ekwesịrị ịhazi ihe mmetụta ahụ?

Ajụjụ: Enwere ike iji njikwa a na gburugburu n'èzí?

Akwụkwọ / akụrụngwa

Ntụaka

Hapụ ikwu

Kagbuo nzaghachi