How do I reset the blinking red light indicating a new phone message on my Uniden D1484?
The blinking red light on your Uniden D1484 handset is the Visual Message Waiting Indicator (VMWI). This usually turns off automatically after you listen…
Manuals+ Q&A
UNIDEN questions & answers
Browse answered questions about UNIDEN, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
What do I press on the Uniden DECT 1580-4WXT handset to retrieve voice messages?
To retrieve voice messages on your Uniden DECT 1580-4WXT phone system, you can access them via the handset menu. Alternatively, you can press the…
I am having problems switching from Marine to Air mode on my Uniden BC355N scanner. How do I do this?
On the Uniden BC355N, the Marine and Air service banks share a single dedicated button. To switch between them, follow these steps: Locate the…
Does the Uniden DECT1560 cordless phone allow a person to leave messages, and if so, how do I set it up and receive them?
Based on the manual for the Uniden DECT1560, this specific model does not include a built-in digital answering machine. Because there is no integrated…
Why is the 'M' icon on my Uniden UDR744 monitor showing red instead of green?
On the Uniden UDR744 surveillance system, the 'M' icon on the monitor screen typically refers to Motion Detection status. While the provided manual text…
How do I reset the blinking message light on my Uniden DECT 1580-4WXT when there are no new messages?
If the message light on your Uniden DECT 1580-4WXT continues to blink even though you have no new messages, it is often caused by…
How do I install the mounting bracket on the Uniden UBC355CLT scanner?
The Uniden UBC355CLT includes a mounting bracket and hardware specifically designed for mobile installation in a vehicle or for securing the unit to a…
Why does my Uniden DECT1560 show 'Unknown Caller' for incoming calls after changing service providers?
If your Uniden DECT1560 has stopped displaying Caller ID information after changing service providers, the issue is most likely related to the service activation…
How can I update my Uniden R3 (FCC ID: AMWUA11702) to the Israel R3IL version?
Updating the Uniden R3 firmware and database is typically done through the official Uniden support website. However, regional firmware versions (such as the Israel…
Can the Uniden DFR7 radar detector be used on a 24-volt cigarette lighter plug?
No, the Uniden DFR7 is not designed for 24V systems. According to the product specifications in the manual, the Operating Power Source is DC…
Why is my Uniden Bearcat 880 having trouble powering on via the volume/power knob, and is there a recall for this issue?
While the provided manual is for the Uniden Bearcat 980SSB, the Bearcat 880 shares a similar design and control layout. If your radio does…
Why are some buttons not working and why can't I get a dial tone or answer calls on my Uniden Premium 5.8GHz Digital Spread Spectrum phone?
Based on the specifications for the Uniden Premium 5.8GHz Digital Spread Spectrum (DSS 8955) series, please try the following troubleshooting steps to resolve issues…
Is there a Japanese instruction manual available for the Uniden Bearcat 980SSB?
Currently, the official manual provided for the Uniden Bearcat 980SSB is only available in English. Uniden primarily targets the North American market for this…
How do I eliminate the tone that sounds when pressing the PTT button on my Uniden Atlantis 155?
The tone you are hearing when pressing a key is likely the Key Beep feature. To turn the Key Beep on or off on…
How do I change the number of rings before the answering machine picks up on the Uniden DECT 3135+1?
To change the number of rings before the integrated answering machine picks up on your Uniden DECT 3135+1, follow these steps using your cordless…
How do I perform a factory reset on the Uniden UBC-125XLT scanner?
To perform a factory reset on the Uniden UBC-125XLT scanner and clear all programmed memory, follow these steps: Turn off the scanner. Press and…
How do I connect the Uniden DSS 7855 + 1WP cordless phone?
To connect your Uniden DSS 7855 + 1WP cordless phone system, follow these general steps based on the product specifications: Base Station: Connect the…
How do I set the time and date on the Uniden DC1 Full HD 1080P Dash Cam?
To set the time and date on your Uniden DC1 Dash Cam, you must access the device's internal settings menu. Follow these general steps:…
How can I increase the wattage and range of my Uniden PRO505XL CB radio?
The Uniden PRO505XL is designed to operate within the legal limits set by the FCC (in the US) and other regulatory bodies, which is…
How do I delete old video, set up detection areas, troubleshoot SD card detection, and what are the recording triggers for the Uniden App Cam Home+?
Based on the Uniden App Cam Home+ manual, here are the answers to your specific questions: Deleting Old Video: The manual does not provide…
What is the homologation number for the Uniden MC535 marine radio?
The provided technical documentation for the Uniden MC535 Marine Radio does not explicitly list a specific homologation or type-approval number. Homologation numbers are often…
How do I turn off Silent Mode on my Uniden DECT 1580-4WXT cordless phone system?
To turn off Silent Mode on most Uniden DECT 6.0 cordless phones, including the DECT 1580-4WXT, you typically need to use a long-press action…
Is there a way to place a delay on some channels on the Uniden BCT15X scanner?
Yes, the Uniden BCT15X allows you to set a Delay for channels and systems. This setting forces the scanner to wait for a specified…
How do I set up the answering system on the UNIDEN D1484 DECT 6.0 Handset?
To set up the answering system on the UNIDEN D1484 DECT 6.0 Handset, please follow these steps: 1. Make sure the phone is in…