Do the JBL Charge 4 and JBL Charge 5 have a stereo audio input for wired amplification (not Bluetooth)?
Based on the provided Quick Start Guide for the JBL Charge 5, there is no mention or visual indication of a 3.5mm auxiliary (spica…
Manuals+ Q&A
Pairing questions & answers
Browse answered questions about Pairing, including setup, troubleshooting, compatibility and maintenance.
Browse topics
Answered questions
How do I use the Lenovo GM2 Pro wireless earphones?
To use your Lenovo GM2 Pro earphones, follow these basic steps for pairing and operation: Pairing: Remove both earbuds from the charging case. They…
What does it mean when the light on my Tempur-Pedic Ease 3.0 base blinks once and then goes out when plugged in?
When you plug in your Tempur-Pedic Ease 3.0 adjustable base, the LED light on the control box is designed to flash as part of…
Why is my left Tozo T10 earbud stuck flashing red and blue instead of flashing blue slowly?
If your left earbud continues to flash red and blue instead of switching to a slow blue flash, it indicates that the two earbuds…
How do I turn off the microphone on JLab Go Sport earbuds?
JLab Go Sport earbuds do not have a dedicated "mute" or "microphone off" button on the earbuds themselves. To turn off the microphone during…
How can I turn the Baseus Bowie MA10 Pro earphones on or off without the charging case?
Based on the manual for the Baseus Bowie MA10 Pro, the primary method for powering the device on and off is through the charging…
My right Lenovo GM2 Pro earbud stopped working. What should I do?
If your right Lenovo GM2 Pro earbud has stopped working, try the following troubleshooting steps: Check for Charge: Place both earbuds back into the…
How do I control the volume on the Baseus Bowie E19 earbuds?
Based on the Baseus Bowie E19 manual, the standard touch controls are as follows: Double-tap (L or R): Answer/Hang up a call or Play/Pause…
How can I resync my Lenovo ThinkPlus GM2 Pro earbuds when only one side is working?
If only one of your Lenovo GM2 Pro earbuds is working, they may have become desynchronized. Follow these steps to resync them: Unpair from…
Where can I find the actual user manual and pairing instructions for the Lenovo GM2 Pro?
The Lenovo GM2 Pro 5.3 Wireless Earphones feature a dual-mode design for gaming and music. Below are the essential instructions for pairing and operation:…
Why are my Soundpeats Truefree earbuds flashing white and red non-stop and failing to connect to any devices?
If your Soundpeats Truefree earbuds are flashing continuously (likely red and white, which indicates pairing mode) but failing to connect, they may have lost…
How do I fix Soundpeats Q32 Pro earbuds that won't pair with each other, won't turn off, and have a solid red LED even after trying the standard reset steps?
If your Soundpeats Q32 Pro earbuds are stuck with a solid red LED and standard reset attempts have failed, they may be in a…
How can I fix a volume imbalance where the right Soundpeats Truengine SE earbud is louder than the left one?
If your Soundpeats Truengine SE earbuds have a volume imbalance (one side louder than the other), it is often caused by a software synchronization…
Why are my MP3 songs not playing on the JBL Endurance Drive even though it is in MP3 mode?
If your JBL Endurance Drive is in MP3 mode (indicated by a solid green LED) but songs are not playing, please follow these troubleshooting…
How do I fix my Tozo T10 earbuds when both are flashing red and blue and will not pair?
If both of your Tozo T10 earbuds are flashing red and blue, it means they are both in pairing mode but have lost their…
How do I pair my JBL E25BT Bluetooth headphones?
To pair your JBL E25BT headphones with a Bluetooth device, follow these steps: Turn on the headphones: Press and hold the power button for…
How do I know when the JBL E25BT headphones are fully charged?
To determine the charging status of your JBL E25BT headphones, observe the LED indicator light located on the device: Charging: The LED indicator will…
How can I change the language on the Losoi TWS-K2 Bluetooth headset?
To change the language on the Losoi TWS-K2 Bluetooth headset, follow these steps while the device is in pairing mode: Ensure the headset is…
Why is my right Soundpeats Truefree earbud not charging, flashing, or pairing with my phone?
It appears your right earbud may be stuck in a state where it is not communicating correctly with the left earbud or the charging…
How do I power on the JBL Endurance Drive and use the touch controls?
The JBL Endurance Drive (DIVE) uses PowerHook™ technology, which means there is no traditional power button. To power the device on or off, you…
Why does my iPod touch screen become unresponsive when I stop playback on my Soundpeats Truefree Plus earbuds?
If your iPod screen becomes unresponsive while using the Soundpeats Truefree Plus, it may be due to a software conflict or Bluetooth interference. While…
Can I pair my Soundpeats Truengine 3 SE to more than one device simultaneously?
The Soundpeats Truengine 3 SE (and the standard Truengine SE) does not support multipoint connection, meaning it cannot be actively connected to two devices,…
Where is the indicator light on the Soundpeats TrueAir charging case and how does it show charging status?
The indicator light for the Soundpeats TrueAir charging case is located on the case itself, typically near the charging port or the function button…
How do I turn off the lights on the JBL Party Xpert?
Yes, you can control the lighting effects using the dedicated button on the speaker. According to the Top Panel diagram in the manual, there…