Harman JBL Party Xpert
HIGH POWER AUDIO SYSTEM WITH BLUETOOTH CONNECTIVITY, LED SHOWS, MIC AND MUSICAL INSTRUMENTS INPUTS
Congratulations for your purchase of our product. Please read through this manual before making connections and operating this product. Retain this manual future reference.
• Multiple Er, sound effect mode
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Package & Contents
1. MIC IN SOCKET
2.GUITAR IN SOCKET
3. MIC VOLUME
13.TWS / PARTY CHAIN
21. LIRD A(PLAYBACK) SLOT
22.USB B (CHARGING)SLOT
•This TWS(TRUE WIRELESS STEREO) Bluetooth connection only use between the same two speakers.
•Power on both speakers,press and hold TWS button on both speakers simultaneously ,the both speakers will display ON-TWS on the display screen and press next/previous button to select between HOST and SLAVE, wait a few seconds to pair automatically, once connected successfully, the display HOSTon the display of the speaker is configured as the master the other display SLAVE on the display of the speaker is configured as the slave.
•Enable your Bluetooth device and make sure it is in Searching mode. *Select ..JBL PARTY XPERr from the list of discovered devices and connect to it. ‘The master speaker will act as the left channel during TWS and will receive the Bluetooth signal,the other speaker will act as the right channel to play music.
•Press end hold TWS button to disconnect the HOST and the SLAVE speaker connection in TWS connection mode.
Use an AUDIO RCA(not included)cable to connect the Audio L/ROUT sockets of this party speaker to another active speaker’s AUDIO L/R IN sockets.
Top Panel Function Operation
USB DRIVE PLAYBACK
*Insert a USB drive into the USB slot on the top panel, press/SOURCE] button on the top panel to select USB mode and the unit will play start automatically the MP3 track in connected USB drive, if play does not start automatically,press [play/pause] button on the top panel . Capacity 64GB. Format:FAT32.
•Insert two microphones into the microphone socket on the top panel and adjust to a low level use the micro phone volume knob on the top panel.
•Adjust the microphone volume and echo level to your desired level use the microphone volume knob on the top panel Now ,enjoy the karaoke singing!
Questions about your Harman JBL Party Xpert ? Post in the comments!
Download aaaaaaaa Manual [PDF]