M5STACK StamPLC IoT Programmable Logic Controller User Guide

Kufotokozera	Parameter
Control Module	StampS3A contro1 module, yotengera ESP32-S3FN8, ikuphatikiza 8MB Flash, 2.4GHz Wi-Fi, Bluetooth Low Energy (BLE)
FLASH	8MB
Zolowetsa Pakompyuta	8 channels of opto-isolated digital inputs, input voltagmtundu: DC 5 ~ 36V
Zotulutsa za digito 0	Zotulutsa za 4-channel relay
Relay	AC 5A@250V,DC 5A@28V
Mphamvu yamagetsi DC	supports DC 6~36V@1A wide voltage supply,DC power cornnector:DC5521 female,5.5x 2.1mm(center-positive)Expansion
n Interfaces	GPIO.EXT interface,2 Grove interfaces
Communication Interfaces	Paboard PWR-CAN ndi PWR-485 zolumikizira
PWR-CAN Interface	XT30(2+2)PW-M
PWR-485 Interface	Chithunzi cha HT3.96-4P
Onetsani	Chiwonetsero chamtundu wa 1.14-inch (135 × 240 resolution), choyendetsedwa ndi chipangizo cha ST7789v2
Contro1 &Interaction	1 RESET/B00T button,3 user buttons, buzzer
Kusungirako Data	Omangidwa mu Micro SD khadi slot
Zomverera	LM75 sensor kutentha,INA226 voltage/sensa yamakono,RTC(RX8130CE)
I/0 Port Load Kutha	2 × 8 kukulitsa mawonekedwe: pazipita 1oad mphamvu DC 4.76V @700mA, Grove doko 1oad mphamvu: DC 4.81V e 700mA
Kugwiritsa Ntchito Mphamvu	Standby current:(5V supp1y)DC 5V@21.60mA,(12V supply)DC 12Ve15.22mA;Operating current:(5V supply)DC 5Ve93.89mA, (12V supply)DC 12V@47.84mA
Njira Yoyikira	Kukhazikitsa njanji za DIN
Kutentha kwa Ntchito	-10-50 ° C
Miyeso Yazinthu	72.0 × 80.0 × 31.7mm
Kulemera kwa katundu	139.4g pa
Makulidwe a Phukusi	102.0x94.0x37mm
Malemeledwe onse	163.7g pa
Wopanga	Malingaliro a kampani M5Stack Technology Co., Ltd Block A10, Expo Bay South Coast, Fuhai Street, Bao'an District, Shenzhen, China
Frequency Range for CE	2.4G Wi-Fi: 2412-2472MHz/2422-2462MHz BLE: 2402-2480MHz
Maximum EIRP for CE	BLE: 6.84dBm 2.4G Wi-Fi: 17.90dBm

Malangizo Ogwiritsira Ntchito Zogulitsa

Yambani Mwamsanga
Kuti muyambe ndi Stam PLC yanu, tsatirani izi:

SANGANI Wi-Fi

Mphamvu pa Stam PLC pogwiritsa ntchito magetsi operekedwa a DC.
Dinani batani la RESET/BOOT kuti muyambitse chipangizocho.
Access the Wi-Fi settings on your device and scan for available networks.

Select the appropriate Wi-Fi network and enter the password if required.
Once connected, you can start utilizing the wireless communication capabilities of the Stam PLC.

KHALANI BLE

Onetsetsani kuti Stam PLC yayatsidwa ndikugwira ntchito.
Yambitsani zochunira za Bluetooth pachipangizo chanu.
Jambulani zida za Bluetooth zomwe zikupezeka pafupi.
Select the Stam PLC from the list of discovered devices to establish a BLE connection.
You can now leverage the BLE functionality for data transfer and control.

ZOCHITIKA

Stam PLC ndi chowongolera chamalingaliro cha IoT chopangidwira makina opanga mafakitale komanso kuyang'anira patali. Chogulitsacho chimachokera ku StampS3A control module, which not only delivers powerful processing capabilities but also provides efficient wireless connectivity. In terms of control, Stam PLC offers 8 opto-isolated digital inputs and 4 relay outputs (supporting both AC and DC loads), along with a
GPIO.EXT port and 2 Grove interfaces, making the integration of various sensors and actuators both simple and reliable. Meanwhile, through the onboard PWR-CAN and PWR-485 interfaces, the device can be seamlessly integrated into industrial fieldbus networks, enabling remote data transmission and centralized control.

For human-machine interaction, the product features a 1.14-inch color display, a RESET/BOOT button, 3 user buttons, and a buzzer, which facilitate real-time parameter configuration and status monitoring, and can alert users in the event of anomalies. To withstand harsh industrial environments, Stam PLC supports a wide voltage input (DC 6–36V) and is designed for DIN rail mounting to ensure secure installation; the built-in Micro SD card slot further facilitates data storage and firmware updates.

Additionally, its environmental monitoring system integrates an LM75 temperature sensor and an INA226 voltage / sensa yamakono ya ndemanga zenizeni zenizeni pa ntchito ya chipangizo, pamene gawo la RTC (RX8130CE) limatsimikizira kugwirizanitsa nthawi yolondola ndi kujambula zolemba. Firmware ya fakitale imangoyika deta pamtambo wa M5's EZDATA, ndikupanga masamba owunikira ndikupatsa ogwiritsa ntchito mwayi wofikira ndi kuwongolera kwakutali. Izi ndizoyenera kupanga makina opanga mafakitale, kuyang'anira kutali, kupanga mwanzeru, ndi ntchito zina.

Malingaliro a kampani Stam PLC

Luso Lolankhulana

Main Controller: ESP32-S3FN8 (StampS3A control module)
Wireless Communication: Wi‑Fi (2.4 GHz) and Bluetooth Low Energy (BLE)

CAN Bus: Onboard PWR‑CAN interface for reliable industrial data communication, RS-485:
Onboard PWR‑485 interface supporting remote control via the Modbus RTU protocol

Purosesa ndi Magwiridwe

Processor Model: Xtensa LX7 dual-core (ESP32-S3FN8)
Kusungirako: 8MB Flash
Operating Frequency: Up to 240 MHz on a dual‑core 32-bit LX7 microprocessor

Kuwonetsa ndi Kuyika

Display: 1.14‑inch color TFT display for real‑time parameter monitoring
Buttons: 1 RESET/BOOT button plus 3 user buttons for control and configuration. Buzzer:

Built‑in buzzer for audio alerts and notifications
RGB LED: Integrated RGB LED for dynamic visual feedback

GPIO Pins ndi Programmable Interfaces

GPIO Pins: Provides multiple configurable GPIO pins (detailed mapping available in documentation)
Zowonjezera:
- 2 Grove interfaces for easy sensor and actuator connection
- GPIO.EXT interface for additional connectivity
- Micro SD card slot for data storage and firmware updates

Ena

Onboard Interfaces: Type‑C connector for programming, power supply, and serial communication

Physical Dimensions: 72.0 × 80.0 × 31.7 mm with DIN rail mount design, suitable for harsh industrial environments
Power Input: Wide voltage input ranging from DC 6–36V
Integrated Sensors: Includes LM75 temperature sensor, INA226 voltage/current sensor, and RTC (RX8130CE) for accurate time synchronization and log recording

Relay Outputs: 4‑channel relay outputs supporting AC 5A @ 250V / DC 5A @ 28V Opto-Isolated Digital Inputs: 8 channels designed to support DC 5–36V inputs for safe signal acq

Kukula kwa Module

KUYAMBA KWAMBIRI

Before you do this step, look at the text in the final appendix: Installing Arduino.

Sindikizani zambiri za WiFi

Tsegulani Arduino IDE (Onani https://docs.m5stack.com/en/arduino/arduino_ide kwa kalozera woyika wa board yachitukuko ndi mapulogalamu)
Select the ESP32S3 DEV Module board and the corresponding port, then upload the code.e

Tsegulani chowunikira kuti muwonetse WiFi yojambulidwa ndi chidziwitso champhamvu ya siginecha.

KUYAMBA KWAMBIRI
Before you do this step, look at the text in the final appendix: Installing Arduin.

Sindikizani zambiri za BLE

Tsegulani Arduino IDE (Onani https://docs.m5stack.com/en/arduino/arduino_ide kwa kalozera woyika wa board yachitukuko ndi mapulogalamu)
Sankhani ESP32S3 DEV Module board ndi doko lofananira, kenako kwezani kachidindo.

Tsegulani chowunikira kuti muwonetse BLE yojambulidwa ndi chidziwitso champhamvu ya siginecha.

Chenjezo la FCC

Chenjezo la FCC:
Kusintha kulikonse kapena kusintha komwe sikunavomerezedwe ndi gulu lomwe limayang'anira kutsata kungathe kulepheretsa wogwiritsa ntchito kugwiritsa ntchito zidazo.
Chipangizochi chikugwirizana ndi gawo 15 la Malamulo a FCC.

Kugwira ntchito kumadalira zinthu ziwiri izi:

Chipangizochi sichikhoza kuyambitsa kusokoneza kovulaza, ndi
Chipangizochi chiyenera kuvomereza kusokonezedwa kulikonse komwe kulandidwa, kuphatikiza kusokoneza komwe kungayambitse ntchito yosafunikira.

ZOFUNIKA KWAMBIRI:

Zindikirani: Zipangizozi zayesedwa ndipo zapezeka kuti zikugwirizana ndi malire a chipangizo cha digito cha Gulu B, motsatira gawo 15 la Malamulo a FCC. Malire awa adapangidwa kuti apereke chitetezo chokwanira ku kusokoneza koyipa pakukhazikitsa nyumba. Chipangizochi chimapanga, chimagwiritsa ntchito, komanso chimatha kuyatsa mphamvu zamawayilesi ndipo, ngati sichinayikedwe ndi kugwiritsidwa ntchito motsatira malangizo, chikhoza kusokoneza mawayilesi. Komabe, palibe chitsimikizo kuti kusokoneza sikudzachitika mu unsembe winawake.

Ngati chida ichi chikuyambitsa kusokoneza koyipa kwa wailesi kapena kulandila wailesi yakanema, komwe kungadziwike ndikuzimitsa ndi kuyatsa zida, wogwiritsa ntchitoyo akulimbikitsidwa kuyesa kusokoneza ndi chimodzi kapena zingapo mwa izi:

Yankhanitsaninso kapena sinthani mlongoti wolandira.
Wonjezerani kulekana pakati pa zida ndi wolandila.
Lumikizani chipangizocho munjira yosiyana ndi yomwe wolandila amalumikizidwa.
Funsani wogulitsa kapena wodziwa ntchito pa wailesi/TV kuti akuthandizeni.

FCC Radiation Exposure Statement

Chida ichi chimagwirizana ndi malire a FCC okhudzana ndi ma radiation omwe akhazikitsidwa kumalo osalamulirika. Zidazi ziyenera kuyikidwa ndikugwiritsidwa ntchito ndi mtunda wochepera 20cm pakati pa radiator ndi thupi lanu.

Kukhazikitsa kwa Arduino

Kuyika Arduino IDE (https://www.arduino.cc/en/Main/Software)

Dinani kuti mucheze ndi mkulu wa Arduino website, ndi kusankha unsembe phukusi kuti opareshoni dongosolo download.

Kuyika Arduino Board Management

Mtsogoleri wa Board URL amagwiritsidwa ntchito kuwonetsa zambiri za board board papulatifomu inayake. Mu menyu ya Arduino IDE, sankhani File -> Zokonda
Koperani ESP board management URL m'munsimu mu Zowonjezera Zowonjezera Board Manager URLs field, and save. https://espressif.github.io/arduino-esp32/package_esp32_dev_index.json
Pamzere wam'mbali, sankhani Board Manager, fufuzani ESP, ndikudina Instalar.
Pam'mbali, sankhani Board Manager, fufuzani M5Stack, ndikudina Ikani.
Kutengera zomwe zagwiritsidwa ntchito, sankhani bolodi lofananiralo pansi pa Zida -> Board -> M5Stack -> {ESP32S3 DEV Module board}.
Lumikizani chipangizo ku kompyuta yanu ndi chingwe cha data kuti mukweze pulogalamuyi.

Mafunso Ofunsidwa Kawirikawiri

Kodi voltagndi Stam PLC?

The analimbikitsa ntchito voltage is between DC 6V to 36V with a current supply of 1A. Ensure to use a compatible DC power supply for optimal performance.

How can I expand the functionality of the Stam PLC?

You can expand the functionality by utilizing the GPIO pins and additional interfaces provided. Connect sensors and actuators to the Grove interfaces for enhanced capabilities.

Zolemba / Zothandizira

M5STACK StamPLC IoT Programmable Logic Controller [pdf] Buku Logwiritsa Ntchito
StamPLC IoT Programmable Logic Controller, IoT Programmable Logic Controller, Programmable Logic Controller, Logic Controller

Maumboni

Buku Logwiritsa Ntchito

M5STACK StamPLC IoT Programmable Logic Controller

Zofotokozera