200W AC Tāuru Auautanga Taurangi
Puku Kōwae me te Mahi PFC
VFD-200C-230
VFD-200C-230 AC Tāuru Taurere Auaumoka Puku Kōwae
 |
 |
| https://www.meanwell.com/Upload/PDF/VFD-E.pdf | https://youtu.be/I8xQxZdWf7A?si=u2BEOM4Fqx1beXny |
Ngā āhuatanga
- 90~264Vac tāuru, hanga-i roto i te PFC whakanui ki 380VDC
- Mana stage, 3-waahanga whakakā me nga pūoko i roto i te waeine kotahi mo te mana o waho (poari mana VFD-CB i hokona motuhake)
- Te teitei o naianei ki te 200% me te 5 hēkona
- He hoahoa kore-kore mo te mahi wahangu me te roa o te oranga
- Parenga: Iahiko poto / OCP
- Ka whangaihia e nga pūoko o roto mo te mana: Pūoko o nāianei – te mana taipana motuka
DC pahi voltage pūoko – OVP/UVP
Pūoko pāmahana – OTP - -30 ~ + 70 ° C te whanui o te wera whakahaere
- He pai mo te taraiwa motini 3-waahi
(hei tauira, te BLDC, te nekeneke whakauru, SynRM) - 3 tau te whakamana
Nga tono
- HVAC
- Kaiwhaiwhai
- Puma wai/Mare
- Nga taputapu hiko
- Kaituku
- Kuaha aunoa
- Nga taputapu whakapakari tinana
GTIN CODE
Rapu MW: https://www.meanwell.com/serviceGTIN.aspx
Whakaahuatanga
Ko te VFD-200C-230 he kōwae hiko puku auau huri noa e whakarato ana i te mana whakaurutage, nga taraiwa kuaha me nga pukoro VFD taketake penei i nga waahanga e toru nga putanga o naianei me te pāmahana. Ka taea te whakatinana i tenei hua mo te otinga taraiwa motuka e toru nga wahanga ma te mahi tahi me tetahi kaiwhakahaere taraiwa motuka o waho i te taumata arorau me te I/0 tairitenga. Te mana stagKo te whakaurunga he waahanga kotahi te waahanga katoa mai i te 90VAC ki te 264VAC me te mahi PFC. Ko te putanga motopaika 3-waahanga ki runga ki te 240V me te 200% peak capability o naianei.Ko te VFD-200C-230 e tika ana mo te taraiwa motuka-toru, penei i te BLDC;
Motini whakauru, me nga tono SynRM.
Tauira Whakawaehere
WHAKAMAHI
| TEKAU NO. | VFD-200-230 | ||||
| PWM PUTANGA (Tuhipoka 1,234) |
VOLTAGARANGA E (UVW) | 380Vmax, raina-ki-raina voltage 0-268V ka taea te whakarite me te PWM whakarereke, e tika ana mo te motuka akomanga 3PH 200-240V | |||
| NAIANEI | Whakatauria | 0.8A | |||
| Te tihi | 1.6A mo te 5 hēkona | ||||
| TE MANA WHAKAMAHI | 200W | ||||
| WHAKAMAHI | 92% | ||||
| DC PAEHI VOLTAGE | 380 ±5VDC | ||||
| PWM MAHI | 2.5 KHz -15 KHz | ||||
| WHAKATOHU | TE WHAKAMAHI INPUT VOLTAGE | 90 - 264VAC | |||
| AWERANGA KAUPAPA KAUPAPA (Hz) | 47 – 63Hz | ||||
| HUANGA HU (Momo.) | PF>0.99/115VAC, PF>0.93/230VAC i te kawenga katoa | ||||
| TE WHAKAMAHI KOREUTU O NAIANEI | 3.5A/115VAC 2Al230VAC | ||||
| NGĀ KOROHI | Te tiimata makariri 50A / 230VAC | ||||
| LEAKAGE CURRENT | <2mA/240VAC | ||||
| TE MANA! WHAKAMAHI (Tuhipoka 5) |
3•WAHA PWM MANA | Tohu mana PWM ki te taraiwa kuaha mo nga IGBT. (CN93, PING-13) 33V TTL/CMOS tāuru: Hiqh(>2.7V): IGBT ON ; Iti (<0.4V): IGBT OFF |
|||
| 3-WAHA KAUPAPA KAUPAPA O NAIANEI | 100mO nga parenga shunt taha-iti i hangaia i runga i te wahanga UVW (CN93, PI144-6) | ||||
| DC PAEHI VOLTAGE SENSOR | DC BUS voltage putanga pūoko (CN93, PINT) 2.5V@DC BUS 380V | ||||
| HE WHAKAMAHI TUATAHI | Ko te 10K0 NTC i hangaia mo te mohio ki nga IGBT te pāmahana whakahaere. (TSM2A103F34D1R (Whakaaro Hiko), PI N3 o CN93) | ||||
| WHAKAMAHI HAPA | Ko te tohu hapa o te hurihanga(Aiahiko poto/OCP, CN93, PI N7). 3.3V TTL/CMOS putanga: Pūnoa: Hiqh(>3V); Kore noa: Iti(<0.5V) |
||||
| TE MANA AWHINA | Ko te mana whakaputa 15V kore-motuhake mo te poari whakahaere o waho (CN93, PIN 14 ki te PI142 ) 15V@0.1A ; Whakaaetanga +/- 0.5V, Ripple 1Vp-p max | ||||
| Tiaki | PIRIOTI Poto | Momo whakamarumaru : Whakawetohia o/p voltage, mana ano kia ora | |||
| TAIAO | TE MAMAHI MAHI. | -30 – +70°C (Tirohia ki te “Kupu whakatipu D) | |||
| HAMAMAIKA MAHI | 20 – 90% RH kore-condensing | ||||
| TEMP., HUMIDITY | -40 – +85°C, 10 – 95% RH kore-condensing | ||||
| WIRIHI | 10 – 500Hz, 2G 10min./Tcycle, wā mo te 60min. ia tuaka X, Y, Z | ||||
| HAURAU & EMC | PAERERE HAURAU | CB I EC61800-5-1,TUV/BS EN/EN61800-5-1,EAC TP TC004 whakaaetia | |||
| KAUPAPA I TE VOLTAGE | I/P-FG:2KVAC | ||||
| TE WHAKATAERANGA | I/P-FG:100M Ohms/500VDC!25°C! 70%RH | ||||
| WHAKAMAHI EMC | Tawhā | Paerewa | Whakamātautau Taumata I Note | ||
| I whakahaeretia | BS EN/EN IEC61800-3 | ClassA, C2 | |||
| Whakatuturu | BS EN/EN IEC61800-3 | ClassA, C2 | |||
| Harmonic Na | BS EN/EN IEC61000-3-2 | ClassA | |||
| Voltage Kapikipiki | BS EN/EN61000-3-3 | ||||
| IMMCUNGA EMC | BS EN/EN IEC61800-3, te taiao tuarua | ||||
| Tawhā | Paerewa | Taumata Whakamatau /Tuhipoka | |||
| ESD | BS EN/EN61000-4-2 | Taumata 3, 8KV hau ; Taumata 2, 4KV whakapā | |||
| Whakatuturu | BS EN/EN IEC61000-4-3 | Taumata3 | |||
| EFT / Maakaha | BS EN/EN61000-4-4 | Taumata3 | |||
| Huringa | BS EN/EN61000-4-5 | Taumata 3, 2KV/Raina-Earth ; Taumata 3, 1KV/Raina-Raina | |||
| I whakahaeretia | BS EN/EN61000-4.6 | Taumata3 | |||
| Papa aukume | BS EN/EN61000-4-8 | Taumata4 | |||
| Voltage Nga Ruku me Nga Porearea | BS EN/EN IEC61000-4-11 | >95% toua 0.5 wā, 30% d ip 25 wā, >95% haukoti 250 wā | |||
| Voltage wehea | IEC 61000-2-4 Akomanga 2 | ±10% Un | |||
| Tapeke Harmonic distortion (THD) Takitahi ota Harmonic | IEC 61000-2-4 Akomanga 3 IEC 61000-4-13 Akomanga 3 | THD 12% | |||
| Rerekētanga auau | IEC 61000-2-4 | ±4% | |||
| Te auau o te huringa | IEC 61000-2-4 | 2%/s | |||
| ATU | MTBF | 2568.7K haora min.Telcordia SR-332 (Bellcore) ; 203.8K haora i roto.M IL HDBK-217F (25°C) | |||
| RAHI (L'WII) | 146'55'26mm | ||||
| TE KAKI | 0.31 Kg;40pcs/13.3kg/0.87CUFT | ||||
| FAKATOKANGA | 1.3-waahanga 220V nekeneke is recommended.Please consider the rated current when used for 100-120V class motor is recommended. 2.Whakaarohia te kaha o naianei kei te "V/I Curve". 3.Ka whakamatauria te kaha ki te kawenga inductive i te mana o naianei me te mana tonu. 4.Ko nga tawhā katoa KORE i whakahuahia ake ka inehia ki te whakaurunga 230VAC, te kawenga whakatau me te 25°C o te pāmahana ambient. 5.Tena koa tirohia ki te "Tuhinga Mahi" mo etahi atu korero.  Whakakape Whakaaetanga Hua Mo nga korero taipitopito, tirohia koa https://www.meanwell.com/serviceDisclaimer.aspx |
||||
Hoahoa Poraka
Mahinga Mahi
- 1.3-waahanga Mana PWM (CN93, PIN8~13)
Ka whakaratohia e VFD-200C-230 te ara iahiko ono-whakawhiti ma te whakamahi i nga IGBT haurua piriti e 3. Ko nga IGBT o ia wahanga e whakahaerehia ana e
(PIN 8~13). Ko te whakaritenga whakauru mo te PWM he hototahi ki nga tohu TTL me CMOS 3.3V. Tena tirohia te hoahoa i raro nei. 
WHAKATŪPATO: He mea tika ki te pupuri i te wa-mate iti i waenga i te whakawhiti o runga me raro o ia wahanga.
- 2.3 (CN93, PIN4~6)3-waahanga Tirohanga o naianei me te Parenga o naianei
Ko nga parenga whakaheke taha iti 100mΩ ka whakauruhia ki ia wahanga o te VFD-200C-230 mo te ine tere me te rapu iahiko-poto. Ko te whakaaro kia whakapotohia te roa o te ara iahiko rapunga o waho me te kite i te tohu me te OPA. Tena tirohia te hoahoa i raro nei.
Mena ka neke ake te naianei putanga ki te 200% o te uara kua tohua, ka puta te ara iahiko whakamarumaru o roto ka tutakina te taraiwa kuaha hei whakamarumaru.
- DC BUS Voltage Rapunga (CN93, PIN1)
Ko te VFD-200C-230 he hanga-i roto me te DC pahi voltage pūoko(HV+ pūoko, PIN 1). Ka whakarato te pūoko i te putanga 2.5V ina DC pahi voltagkei te 380V. E kiia ana kia kitea te tohu e nga OPA. I te wa o te voltage o te pahi DC neke atu i te 420V, me tutakina te tohu whakauru PWM hei whakamarumaru.
- IGBT Wehenga Rapu (CN93, PIN3)
Ko te VFD-200C-230 he mea hanga-i roto i te parenga NTC mo te kite i te pāmahana IGBT. Ka taea e nga kaiwhakamahi te kite i te pāmahana IGBT hei whakamarumaru. (Momo NTC: TSM2A103F34D1R, Thinking Electronic) Kei raro te ara iahiko rapunga e taunakitia ana. Ko te whakaaro me kati te whakaurunga PWM, mena kei runga ake te 95 ℃ te pawera.
- Tohu hape
Mēnā ka tūtaki te VFD-200C-230 ki tētahi āhua o te tere, ka noho tonu ki tērā āhua mō te wā iti rawa atu, ka whakahohehia te tohu FAULT (he iti te kaha) hei whakamohio i te kaiwhakahaere o waho, ara iahiko ranei.
- Nga Tohunga Parai(CN100,PIN1,3)
VFD-200C-230 kua rahuitia CN100 PIN1,3 e hono ana ki te HV+,HV- mo te hoahoa ara iahiko pakaru.
Te vol nuitage i runga i te pahi DC(HV+) kaua e teitei ake i te 420V.
Whakatakotoranga Hangarau
AC Input Terminal Pin NO. Taumahi (TB1)
| Pin No. | Taumahi |
| 1 | AC / L |
| 2 | AC / N |
| 3 |  |
Qutput Terminal Pin NO. Taumahi (TB100)
| Pin No. | Taumahi |
| 1 | U |
| 2 | V |
| 3 | W |
Tuhono Pahi 380V DC(CN100): JST B3P-VH he rite ranei
| Pin No. | Taumahinga |
| 1 | HV+ |
| 2 | Kore Pin |
| 3 | HV – |
Whare whakahoa: JST VHR, he rite ranei
Kāpeka: JST SVH-21T-P1.1 he rite ranei
Ka whakamahia te CN100 mo te whakauru i te taputapu pakaru whakaora, hei karo i te kino o te VFD-200C-230.
Pin Mana NO. Taumahi (CN93) : HRS DF11-14DP-2DS he rite ranei
| Pin No. | Taumahi | Pin No. | Taumahi |
| 1 | HV+ pūoko | 8 | PWM_W H |
| 2 | HV- | 9 | PWM_W L |
| 3 | RTH | 10 | PWM_V H |
| 4 | RsH U | 11 | PWM_V L |
| 5 | RsH V | 12 | PWM_U H |
| 6 | RSH_W | 13 | PWM_U L |
| 7 | HAPA | 14 | Vaux _ 15V |
Whare whakahoa: HRS DF11-14DS he rite ranei
Kāpeka HRS DF 11-**SC he rite ranei
Tau Pin Nama Taumahi(CN93):
| Pin No. | Mahi | Whakaahuatanga |
| 1 | HV+ pūoko | DC BUS voltage putanga pūoko, tohutoro ki te titi 2(HV-) |
| 2 | HV- | DC BUS voltage sensor putanga whenua |
| 3 | RTH | Pūoko pāmahana |
| 4 | RSH_U | U wāhanga putanga pūoko nāianei |
| 5 | RSH_V | Wāhanga V putanga pūoko nāianei |
| 6 | RSH_W | Whanga Whanga putanga pūoko o nāianei |
| 7 | HAPA | Neke atu i te kitenga o naianei. Pūnoa > 3V, Taunoa <0.5V |
| 8 | PWM_W H | Whanga Whanga teitei urunga arorau taha, i runga > 2.7V; atu <0.4V |
| 9 | PWM_W L | W wahanga iti urunga arorau taha, i runga > 2.7V; atu <0.4V |
| 10 | PWM_V H | Wāhanga V tāuru arorau taha teitei, i runga > 2.7V ; atu <0.4V |
| 11 | PWM_V L | Wāhanga V tāuru arorau taha iti, i runga > 2.7V ; atu <0.4V |
| 12 | PWM_U H | Wāhanga U tāuru arorau taha teitei, i runga > 2.7V; atu <0.4V |
| 13 | PWM_U L | U wahanga iti urunga arorau taha, i runga > 2.7V; atu <0.4V |
| 14 | Vaux_15V | Putanga awhinatage whakaputa 15V tohutoro ki te pint (HV-). Ko te 0.1A te kawenga o naianei |
Taupānga
Tono example: tono puku BLDC
- Ko te ahua e whakaatu ana i tetahi punaha puku BLDC kua whakaritea me VFD-200C-230.
- Ka taea e nga kaihanga te whakahaere i te tohu PWM o te 6-whakawhiti ma te whakamahi i te SPWM, te SVPWM ranei, me etahi atu mo te 3-waahanga voltagte whakarerekētanga, me te hanga i te turanga tikanga whakahaere i runga i nga pukoro shunt o naianei i runga i nga wa-3-waahanga pana-iti (RSH_U/V/W) me te DC BUS voltage pūoko(HV-+ pūoko) i whakaratohia e VFD-200C-230.
- Ka taea e nga kaiwhakawhanake te kowhiri i nga pukoro tuunga BLDC e tika ana penei i te encoder, i te Hall-effect sensors kia pai ki a raatau tono.
- E whakaarotia ana kia whakauruhia te ara iahiko / taputapu ki te titi HV-+/HV-(DC BUS,CN100) hei karo i te DC BUS OVP i te wa e tere haere ana te BLDC.
- Ko te whakaaro kia tutakina te whakauru PWM, hono atu ranei ki te taputapu parenga parai mo te haumaru i te wa DC Bus voltaghe teitei ake i te 420V.
- Mena i tonohia te VFD-200C-230 me te mana kore e tika, penei i te tere tere, i te kino ranei o te mana o naianei, tera pea ka raru te ahua o te VFD-200C-230 ki te kati i te puka whakaputa.tage(taumata-iti i runga i te pine FAULT).
Tāutatanga
- Mahi me etahi atu pereti konumohe
Kia tutuki ai te*Kananga Whakahekea”me te “Tauhuatanga Pateko* me whakauru nga raupapa VFD ki runga i te pereti konumohe(te rūnanga o te rahi rite tonu ranei) ki raro. Ko te rahi o te pereti konumohe e whakaarohia ana e whakaatuhia ana i raro nei. A, mo te arotau i te mahi waiariki, me noho te papaa konumohe kia rite, kia maeneene te mata (me whakakikoruatia ranei ki te hinu waiariki), me nga raupapa VFD me mau ki te pokapū o te pereti konumohe.
- Ki te 15CFM hau kaha
Rarangi Hoko
Mena kei a koe etahi whakaritenga mana mo te tono motuhake, me toro atu ki a MEAN WELL mo etahi atu korero.
Te poari whakahaere motopaika ( Me tono motuhake te poari whakahaere motuka me te kōwae puku VFD )
| Te ota a MW No. | Poari Whakahaere | Whakaaro Huihuinga | Te nui |
| VFD-CB |  |
 |
1 |
Taupānga Angamaheni
- Kōwae Auautanga Taurangi (raupapa VFD)
- Papa whakahaere o te Puku Auautanga Hurorirori (Na te Kaiwhakamahi, na Soluton ranei i Homai e MEAN WELL)
- 3-wahanga Pump Motor
- Pūhiko
- Kōwae Auautanga Taurangi (raupapa VFD)
- Papa whakahaere o te Puku Auautanga Hurorirori (Na te Kaiwhakamahi, na te Soluton ranei i Homai e MEAN WELL)
- 3-waahi Wira Motini mo te AGV Tono
- Kōwae Auautanga Taurangi (raupapa VFD)
- Papa whakahaere o te Puku Auautanga Hurorirori (Na te Kaiwhakamahi, na te Soluton ranei i Homai e MEAN WELL)
- 3-waahanga Pakihi Motor
- HEPA mo te Tatari Air
KETE DEMO
Tena koa whakapā atu ki a MEAN WELL mo etahi atu korero.
VFD Demo Kit Mahi Matua me nga waahanga.
- Hanga-i roto i te VFD-350P-230 me te motuka 230V.
- Te tiimata / mutu / whakamua / whakamuri / whakahaere tere.
- Motuka timata/tu/whakamua/whakamuri tohu matau.
- Whakaaturanga tere motopaika (RDM).
- Ka taea te whakakapi i te poari whakahaere.
- Tautoko hononga motuka o waho.
Manual Tāuta
Tena tirohia: http://www.meanwell.com/manual.html
Tuhinga / Rauemi
 |
MEAN WELL VFD-200C-230 AC Tāuru Taurere Auaumoka Puku Kōwae me te Taumahi PFC [pdf] Pukapuka Rangatira VFD-200C-230, VFD-200C-230-20240812, VFD-200C-230 AC Input Rerency Rerency Drive Module with PFC Function, VFD-200C-230, AC Input Rerency Rerency Drive Module with PFC Function, Variable Drive Drive Module Te Mahi PFC, Te Mahinga Puku Auau me te Mahi PFC, Te Waehere Puku me te Mahi PFC, Te Whakaaetanga PFC, me te Mahi PFC, Te Mahi PFC, Te Mahi |