200W AC ntinye mgbanwe ugboro
Module mbanye nwere ọrụ PFC
VFD-200C-230
VFD-200C-230 AC ntinye mbanye mgbanwe ugboro ugboro
 |
 |
| https://www.meanwell.com/Upload/PDF/VFD-E.pdf | https://youtu.be/I8xQxZdWf7A?si=u2BEOM4Fqx1beXny |
Atụmatụ
- Ntinye 90 ~ 264Vac, nkwalite PFC arụnyere na 380VDC
- Ike stage, 3-phase switches nwere sensọ n'otu nkeji maka njikwa mpụga (osisi njikwa VFD-CB rere nke ọma)
- Ọnụ ọgụgụ dị elu ugbu a ruo 200% na 5 sekọnd
- Nhazi na-enweghị fan maka ọrụ ịgbachi nkịtị na ogologo ndụ
- Nchedo: Short sekit / OCP
- Ihe mmetụta dị n'ime na-eri nri maka njikwa: ihe mmetụta dị ugbu a - njikwa torque moto
DC ụgbọ ala voltage sensọ – OVP/UVP
Ihe mmetụta okpomọkụ - OTP - -30 ~ + 70C obosara na-arụ ọrụ okpomọkụ
- Kwesịrị ekwesị maka moto mbanye 3-phase
(dịka ọmụmaatụ BLDC, moto induction, SynRM) - 3years akwụkwọ ikike
Ngwa
- HVAC
- Onye ofufe
- Mgbapu mmiri / ikuku
- Ngwaọrụ ike
- Nbufe
- Ọnụ ụzọ akpaaka
- Akụrụngwa mgbatị ahụ
Koodu GTIN
Ọchụchọ MW: https://www.meanwell.com/serviceGTIN.aspx
Nkọwa
VFD-200C-230 bụ ihe na-agbanwe agbanwe ugboro ugboro mbanye ike modul na-enye ike stage. Enwere ike itinye ngwaahịa a maka ngwọta draịvụ moto nke atọ site na ijikọ ya na onye na-ahụ maka draịva mpụga na ọkwa mgbagha yana I/0 analog. Ike stagNtinye ntinye bụ otu usoro zuru oke site na 90VAC ruo 264VAC nwere ọrụ PFC. Ihe mmepụta moto nke 3-phase dị ruo 240V na ikike 200% kacha elu ugbu a. VFD-200C-230 dị mma maka ụgbọala nke atọ, dị ka BLDC;
Induction moto, na ngwa SynRM.
Ihe ntinye ihe nlere
Nkọwapụta
| ELM NOAKA N’AGH.. | VFD-200-230 | ||||
| Mpụta PWM (Ntụbaaka nke 1,234) |
VOLTAGE RANGE (UVW) | 380Vmax, ahịrị-na-akara voltage 0-268V nwere ike ịhazi ya na PWM gbanwetụrụ, dabara adaba maka moto klas 3PH 200-240V | |||
| UGBUA | Enyere aha | 0.8A | |||
| Ọnụ ọgụgụ kasị elu | 1.6A maka 5 sekọnd | ||||
| EGO IKE | 200W | ||||
| Ịrụ arụ ọrụ | 92% | ||||
| DC ụgbọ ala VOLTAGE | 380 ± 5VDC | ||||
| Ugboro ugboro PWM | 2.5 kHz -15 kHz | ||||
| Ntinye | EKWERE Mpịakọta MpịakọtaTAGE | 90 - 264VAC | |||
| OGWU NDỊ MMADỤ (Hz) | 47 - 63 Hz | ||||
| IHE MGBE IKE (Ụdị) | PF>0.99/115VAC, PF>0.93/230VAC na ibu zuru oke | ||||
| EKWERE EKWESỊRỊ ỤBỤRỤ ỤBỤRỤ | 3.5A/115VAC 2Al230VAC | ||||
| INI IGBO | Mmalite oyi 50A / 230VAC | ||||
| NKWUKWU UGBUA | <2mA/240VAC | ||||
| Njikwa! Ọrụ (Ntụbaaka nke 5) |
3• Njikwa PWM PHASE | PWM akara akara na onye ọkwọ ụgbọ ala maka IGBT. (CN93, PING-13) 33V TTL/CMOS ntinye: Hiqh(>2.7V): IGBT NA; Ala (<0.4V): Gbanyụọ IGBT |
|||
| 3-PHASE SENSOR dị ugbu a | Ndị na-emegide shunt dị ala 100mO arụnyere na usoro UVW (CN93, PI144-6) | ||||
| DC ụgbọ ala VOLTAGSENSOR | DC BUS voltage mmetụta mmetụta (CN93, PINT) 2.5V@DC BUS 380V | ||||
| SENSOR THERMAL | NTC 10K0 arụnyere maka ịmata IGBT na-arụ ọrụ okpomọkụ. (TSM2A103F34D1R (Eletrik na-eche echiche), PI N3 nke CN93) | ||||
| AKWỤKWỌ NDỊ MMADỤ | Mgbama mmejọ inverter (Obere sekit/OCP, CN93, PI N7). 3.3V TTL/CMOS mmepụta: Nkịtị: Hiqh (> 3V); Na-adịghị mma: Ala (<0.5V) |
||||
| IKE inyeaka | Ike mmepụta 15V na-abụghị nke dịpụrụ adịpụ maka bọọdụ njikwa mpụga (CN93, PIN 14 ruo PI142) 15V@0.1A; Ntachi obi +/- 0.5V, Ripple 1Vp-p max | ||||
| Nchedo | Obere oge | Ụdị nchekwa : Gbanyụọ o/p voltage, re-ike na-agbake | |||
| Gburugburu Ebe Obibi | ỌRỤ NA-arụ ọrụ. | -30 – +70°C (tụ aka na “D rearing Curve) | |||
| Iru mmiri na-arụ ọrụ | 20-90% RH na-abụghị condensing | ||||
| Okpomọkụ nchekwa, iru mmiri | -40 - + 85°C, 10 – 95% RH na-abụghị condensing | ||||
| VIBRATION | 10 – 500Hz, 2G 10min./Tcycle, oge maka 60min. nke ọ bụla tinyere X, Y, Z axe | ||||
| Nchekwa & EMC | Ọkọlọtọ nchekwa | CB I EC61800-5-1,TUV/BS EN/EN61800-5-1,EAC TP TC004 kwadoro | |||
| NA -ECHE VOLTAGE | I/P-FG:2KVAC | ||||
| Nguzogide dịpụrụ adịpụ | I/P-FG:100M Ohms/500VDC!25°C! 70% RH | ||||
| EMC EMISỌ | Oke | Ọkọlọtọ | Nlebanya Ọkwa m | ||
| Emere | BS EN/EN IEC61800-3 | Klas, C2 | |||
| Gbanyere | BS EN/EN IEC61800-3 | Klas, C2 | |||
| Harmonic Ugbu a | BS EN/EN IEC61000-3-2 | KlasA | |||
| Voltage Flicker | BS EN/EN61000-3-3 | ||||
| EMC MGBE | BS EN / EN IEC61800-3, nke abụọ | ||||
| Oke | Ọkọlọtọ | Ọkwa ule / ndetu | |||
| ESD | BS EN/EN61000-4-2 | Ọkwa 3, 8KV ikuku; Ọkwa 2, kọntaktị 4KV | |||
| Gbanyere | BS EN/EN IEC61000-4-3 | Ọkwa3 | |||
| EFT / Burest | BS EN/EN61000-4-4 | Ọkwa3 | |||
| Mwapụta | BS EN/EN61000-4-5 | Ọkwa 3, 2KV/Akara-Ụwa; Ọkwa 3, 1KV/Line-Line | |||
| Emere | BS EN/EN61000-4.6 | Ọkwa3 | |||
| Ubi magnetik | BS EN/EN61000-4-8 | Ọkwa4 | |||
| Voltage Dips na nkwụsị | BS EN/EN IEC61000-4-11 | > 95% tinye 0.5 oge, 30% d ip 25 oge,> 95% nkwụsịtụ 250 oge | |||
| Voltage deviation | IEC 61000-2-4 Klas 2 | ± 10% Un | |||
| Mgbagwoju anya Harmonic (THD) iwu nkwekọ n'otu n'otu | IEC 61000-2-4 Klas 3 IEC 61000-4-13 Klas 3 | THD 12% | |||
| Ọdịiche ugboro ugboro | IEC 61000-2-4 | ±4% | |||
| Ọnụego mgbanwe ugboro ugboro | IEC 61000-2-4 | 2%/s | |||
| Ndị ọzọ | MTBF | 2568.7K awa min. Telcordia SR-332 (Bellcore); 203.8K elekere m in.M IL HDBK-217F (25°C) | |||
| DIMENSION (L'WII) | 146'55'26mm | ||||
| Mbukota | 0.31 n'arọ; 40pcs/13.3kg/0.87CUFT | ||||
| IHE | A na-atụ aro 1.3-phase 220V moto.Biko tụlee akara ugbu a mgbe ejiri ya maka moto klas 100-120V. 2. Rụtụ aka na ikike kachasị ugbu a na "V / I Curve". 3.Efficiency na-anwale na inductive ibu na gosiri ugbu a na zuru ike. 4.All parameters NOT akpan kwuru na-atụ na 230VAC ntinye, rated ibu na 25 Celsius C nke ambient okpomọkụ. 5. Biko rụtụ aka na "Akwụkwọ ntuziaka ọrụ" maka nkọwa ndị ọzọ.  Nkwụghachi ụgwọ ngwaahịa maka ozi zuru ezu, biko rụtụ aka https://www.meanwell.com/serviceDisclaimer.aspx |
||||
Ihe Ngosi
Akwụkwọ ntuziaka ọrụ
- Njikwa PWM nke oge 1.3 (CN93, PIN8 ~ 13)
VFD-200C-230 na-enye sekit mgba ọkụ isii site na iji IGBT ọkara akwa 3. A na-achịkwa IGBT nke usoro ọ bụla
(PIN 8-13). Ihe ntinye chọrọ maka PWM dakọtara na akara TTL na CMOS 3.3V. Biko rụtụ aka na eserese dị n'okpuru. 
Ịdọ aka ná ntị: Ọ dị mkpa idobe oge opekata mpe n'etiti mgba ọkụ elu na nke ala nke usoro ọ bụla.
- 2.3 (CN93, PIN4 ~ 6) Nchọpụta dị ugbu a & Nchekwa gafere ugbu a
A na-etinye ihe mgbochi shunt dị ala 100mΩ na akụkụ nke ọ bụla nke VFD-200C-230 maka nha c urrent na nchọpụta mkpirisi okirikiri. A na-atụ aro ka iwelata ogologo sekit nchọpụta mpụga wee jiri OPA chọpụta mgbaàmà. Biko rụtụ aka na eserese dị n'okpuru.
Ọ bụrụ na mmepụta nke ugbu a karịrị 200% nke uru akwadoro, sekit nchebe ime ga-akpalite ma mechie onye ọkwọ ụgbọ ala maka nchekwa.
- DC BUS Voltage Nchọpụta (CN93, PIN1)
VFD-200C-230 na-eji ụgbọ ala DC voltagihe mmetụta (HV+ sensọ, PIN 1). Ihe mmetụta na-enye mmepụta 2.5V mgbe ụgbọ ala DC voltage bụ 380V. A na-atụ aro ka ịchọpụta mgbaàmà sitere na OPA. Mgbe voltage nke ụgbọ ala DC gafere 420V, mgbama ntinye PWM ga-emechirịrị maka nchekwa.
- Nchọpụta okpomọkụ IGBT (CN93, PIN3)
VFD-200C-230 ka arụnyere n'ime ihe mgbochi NTC maka ịchọpụta okpomọkụ IGBT. Ndị ọrụ nwere ike ịchọpụta okpomọkụ IGBT maka nchekwa. (ụdị NTC: TSM2A103F34D1R, Thinking Electronic) Sekit nchọpụta akwadoro dị n'okpuru. A na-atụ aro ka mechie ntinye PWM, ma ọ bụrụ na okpomọkụ dị n'elu 95 ℃.
- Mgbama mmejọ
Ọ bụrụ na VFD-200C-230 na-ezute ọnọdụ nfebigara ókè ma nọgide na steeti ahụ maka oge kacha nta, a ga-eme ka mgbaàmà FAULT rụọ ọrụ (ọrụ dị ala) iji gwa onye na-ahụ maka mpụga ma ọ bụ sekit.
- Ntụnye breeki (CN100, PIN1,3)
VFD-200C-230 echekwara CN100 PIN1,3 nke jikọtara na HV +, HV- maka imewe sekit breeki.
Oke voltage na DC Bus (HV+) agaghị adị elu karịa 420V.
Nkọwapụta igwe
Ntinye ntinye AC Pin NO. Ihe omume (TB1)
| Pin Nke | Ihe omume |
| 1 | AC/L |
| 2 | AC/N |
| 3 |  |
Qutput Terminal Pin NO. Ihe omume (TB100)
| Pin Nke | Ihe omume |
| 1 | U |
| 2 | V |
| 3 | W |
Njikọ ụgbọ ala 380V DC (CN100): JST B3P-VH ma ọ bụ otu
| Pin Nke | Ọrụ AW |
| 1 | HV+ |
| 2 | Enweghị Pin |
| 3 | HV - |
Ụlọ mating: JST VHR ma ọ bụ ihe dakọtara
Ọnụ: JST SVH-21T-P1.1 ma ọ bụ otu
A na-eji CN100 maka ịwụnye ngwaọrụ breeki na-emegharị, na-ezere mmebi VFD-200C-230.
Njikwa Pin NO. Ihe omume (CN93): HRS DF11-14DP-2DS ma ọ bụ otu
| Pin Nke | Ihe omume | Pin Nke | Ihe omume |
| 1 | HV + ihe mmetụta | 8 | PWM_W H |
| 2 | HV- | 9 | PWM_W L |
| 3 | RTH | 10 | PWM_V H |
| 4 | RsH U | 11 | PWM_V L |
| 5 | RsH V | 12 | PWM_U H |
| 6 | RSH_W | 13 | PWM_U L |
| 7 | EZIOKWU | 14 | Vaux _ 15V |
Ụlọ obibi: HRS DF11-14DS ma ọ bụ otu
Ọnụ HRS DF 11-** SC ma ọ bụ otu
Ọrụ Ntụtụ njikwa(CN93):
| Pin Nke | Ọrụ | Nkọwa |
| 1 | HV + ihe mmetụta | DC BUS voltage sensọ mmepụta, na-ezo aka pin 2(HV-) |
| 2 | HV- | DC BUS voltage sensọ mmepụta ala |
| 3 | RTH | Ihe mmetụta okpomọkụ |
| 4 | RSH_U | Mmepụta ihe mmetụta nke oge a |
| 5 | RSH_V | Mmepụta ihe mmetụta nke oge V nke ugbu a |
| 6 | RSH_W | W nkeji mmepụta ihe mmetụta dị ugbu a |
| 7 | EZIOKWU | Karịrị nchọpụta ugbu a. Nkịtị> 3V, adịghị mma <0.5V |
| 8 | PWM_W H | W oge ntinye mgbagha akụkụ dị elu, na> 2.7V; agbanyụrụ <0.4V |
| 9 | PWM_W L | W nkeji ntinye mgbagha akụkụ dị ala, na> 2.7V; agbanyụrụ <0.4V |
| 10 | PWM_V H | V oge ntinye mgbagha akụkụ dị elu, na> 2.7V; agbanyụrụ <0.4V |
| 11 | PWM_V L | V nkeji ntinye mgbagha mgbagha dị ala, na> 2.7V; agbanyụrụ <0.4V |
| 12 | PWM_U H | Ntinye mgbagha akụkụ dị elu, na> 2.7V; agbanyụrụ <0.4V |
| 13 | PWM_U L | U oge ntinye mgbagha akụkụ dị ala, na> 2.7V; agbanyụrụ <0.4V |
| 14 | Vaux_15V | Enyemaka voltage mmepụta 15V ntụaka na pint (HV-). Oke kachasị ugbu a bụ 0.1A |
Ngwa
Ngwa example: BLDC mbanye ngwa
- Onu ogugu a gosiputara sistemu mbanye BLDC nke nwere VFD-200C-230.
- Ndị mmepe nwere ike ijikwa akara PWM nke 6-switch site na iji SPWM ma ọ bụ SVPWM, wdg maka vol 3-phasetage modulation, ma wuo usoro njikwa na ntọala shunt dị ugbu a na mgba ọkụ akụkụ 3-phase (RSH_U/V/W) na DC BUS vol.tage sensọ (HV-+ sensọ) nke VFD-200C-230 nyere.
- Ndị mmepe nwere ike họrọ ihe mmetụta ọnọdụ BLDC kwesịrị ekwesị dị ka koodu nzuzo ma ọ bụ ihe mmetụta Ụlọ Nzukọ dabara na ngwa ha.
- A na-atụ aro ka ịwụnye sekit / ngwaọrụ breeki na HV-+/HV-pin(DC BUS,CN100) iji zere DC BUS OVP mgbe BLDC na-ebelata.
- A na-atụ aro ka mechie ntinye PWM ma ọ bụ jikọọ na ngwaọrụ mgbochi breeki maka nchekwa mgbe DC Bus voltagdị elu karịa 420V.
- Ọ bụrụ na etinyere VFD-200C-230 na njikwa na-ekwesịghị ekwesị, dị ka ịme ngwa ngwa ngwa ngwa ma ọ bụ njikwa dị ugbu a na-adịghị mma, ọ nwere ike kpalite ọnọdụ njehie VFD-200C-230 iji mechie mmepụta vol.tage (ọkwa dị ala na pin FAULT).
Nwụnye
- Jiri efere aluminom ọzọ rụọ ọrụ
Iji zute * Derating Curve "na usoro "Static Characteristics* VFD ga-etinyerịrị n'elu efere aluminom (ma ọ bụ kabinet nke otu nha) na ala. Ogo nke efere aluminom tụrụ aro ka egosiri dị ka n'okpuru. Na maka ịkwalite arụmọrụ ọkụ, efere aluminom ga-enwerịrị ihu dị larịị ma dịkwa larịị (ma ọ bụ kpuchie ya na griiz thermal), na usoro VFD ga-abụrịrị nke siri ike na etiti efere aluminom.
- Na 15CFM mmanye ikuku
Ndepụta Ngwa
Ọ bụrụ na ị nwere ikike njikwa ọ bụla nke ngwa akọwapụtara, biko kpọtụrụ MEAN WELL maka nkọwa ndị ọzọ.
Board njikwa moto (Moto akara bọọdụ na VFD mbanye modul kwesịrị inye iwu iche iche)
| Iwu MW No. | Ụlọ njikwa | Ntụnye Mgbakọ | Ọnụọgụ |
| VFD-CB |  |
 |
1 |
Ngwa a na-ahụkarị
- Module Frequency agbanwe agbanwe (usoro VFD)
- bọọdụ njikwa nke mbanye ugboro ugboro mgbanwe (nke onye ọrụ ma ọ bụ Soluton nyere site MEAN WELL)
- 3-phase Pump Motor
- Batrị
- Module Frequency agbanwe agbanwe (usoro VFD)
- bọọdụ njikwa nke mbanye ugboro ugboro mgbanwe (nke onye ọrụ ma ọ bụ Soluton mere MEAN WELL)
- 3-phase Wheel Motor maka ngwa AGV
- Module Frequency agbanwe agbanwe (usoro VFD)
- bọọdụ njikwa nke mbanye ugboro ugboro mgbanwe (nke onye ọrụ ma ọ bụ Soluton mere MEAN WELL)
- 3-phase Fan moto
- HEPAfor Ikuku Filtering
DEMO KIT
Biko kpọtụrụ MEAN WELL maka nkọwa ndị ọzọ.
Ngwa ihe ngosi VFD bụ isi yana atụmatụ.
- VFD-350P-230 na moto 230V arụnyere.
- Mbido moto/nkwụsị/ịga n'ihu/atụgharị/njikwa ọsọ.
- Ngosi mmalite/nkwụsị/ịga n'ihu/aghachi azụ nri.
- Ọsọ moto (RDM) ngosi.
- Ogwe njikwa nwere ike dochie ya.
- Kwado njikọ moto mpụga.
Akwụkwọ ntuziaka nwụnye
Biko rụtụ aka: http://www.meanwell.com/manual.html
Akwụkwọ / akụrụngwa
 |
MFEAN nke ọma VFD-200C-230 AC ntinye mbanye mgbanwe ugboro ugboro nwere ọrụ PFC [pdf] Akwụkwọ ntuziaka onye nwe VFD-200C-230, VFD-200C-230-20240812, VFD-200C-230 AC ntinye mbanye mgbanwe ugboro ugboro nwere ọrụ PFC, VFD-200C-230, AC ntinye mgbanwe mgbanwe ugboro ugboro nwere modul mbanye nwere PFC arụ ọrụ, Varidu Drive Module Ọrụ PFC, Mbanye ugboro ugboro Modul nwere ọrụ PFC, Module mbanye nwere ọrụ PFC, Modul nwere ọrụ PFC, nwere ọrụ PFC, ọrụ PFC, ọrụ |