Westermo Ibex-1310 Industrial Outdoor Wi-Fi 6 Access Point

Brand: Westermo

Product Overview

The Ibex-1310 is a dual-band, simultaneous Wi-Fi 6 802.11ax access point and client device designed for industrial vehicles and stationary applications. It delivers reliable, efficient, and fast data transfer with advanced cybersecurity features.

Engineered to withstand harsh environments, the Ibex-1310 is exposed to continuous vibrations, extreme temperatures, humidity, and demanding electromagnetic conditions. It is also approved for use on board vehicles, such as buses.

Its GORE-TEX® membrane prevents internal condensation. Excellent isolation across all interfaces allows direct connection to the vehicle's auxiliary power supply and provides protection against surges and voltage spikes. IP66 ? protection prevents water ingress. Type N connectors offer a standard interface for external antennas.

The optimized overall design results in a compact unit with a very high Mean Time Between Failures (MTBF) for easy integration into confined spaces, along with a low lifecycle cost.

Extensive type testing by independent laboratories certifies compliance with a wide range of standards, including EN 50121-4.

Key Features

Compact WLAN access point
Dual Wi-Fi 6 802.11ax WLAN interfaces ?
Simultaneous 2.4 GHz and 5 GHz operation
Low power consumption ⚡
Cybersecurity features supporting critical infrastructure installations ?
Designed for embedded use
IP66 rated ? and -40 to +70°C operating temperature ?️
Compact design with M12 interfaces
Isolated 9.6 to 60 VDC power supply
802.11 latest generation design
IEEE802.11ax for maximum efficiency
Client management features
Simple and flexible configuration

Specifications

Dimensional Plan

The device has a compact, fully metallic enclosure. Key dimensions are approximately 195.4 mm in length, 70 mm in height, and 111 mm in depth. The rear view shows two Type N antenna connectors and two X-coded M12 connectors for Ethernet. The side views detail the overall form factor and mounting points.

Technical Characteristics
Characteristic	Value
Dimensions (L x H x D)	195 x 70 x 111 mm
Enclosure	Fully metallic
Weight	1.45 kg (without antennas)
Operating Temperature	-40 to +70°C
Protection	IP66 ?
MTBF	424,000 hours (538,000 hours for PoE variant)
Nominal Voltage^a	12 to 48 VDC
Operating Voltage^a	9.6 to 60 VDC
Nominal Power	14 W
PoE	PoE Class 4 (IEEE802.3at Type 1 and 2 PD)
^a DC power supply not included in 'PoE only' product variants.

Interface
Type	Description
RF Antenna	2 x Type N connectors for Wi-Fi 6 ?
Ethernet	2 x 10/100/1000/2.5G Base-T, 2 x X-coded M12 connectors

Wireless Specifications

Wireless Characteristics
Characteristic	Details
Operating Modes	Access Point, Client, Bridge
Interfaces	2x2 MU-MIMO dual simultaneous dual-band (4 Spatial Streams total)
Compatible Standards	IEEE 802.11b, 802.11g, 802.11a, 802.11n, 802.11ac, 802.11ax
Frequency Range	2.400 to 2.4835 GHz (2x2 MU-MIMO) ? 5.150 to 5.350 GHz, 5.470 to 5.725 GHz, 5.725 to 5.875 GHz (2x2 MU-MIMO) ?
Supported Data Rates	2.4 GHz: up to 802.11ax 40 MHz 2SS BW HE11: 573 Mbps ? 5 GHz: up to 802.11ax 80 MHz 2SS BW HE11: 1201 Mbps ?
RF Transmit Power (2.4 GHz)^a	Max conducted: 25 dBm, per port: 22 dBm
RF Transmit Power (5 GHz)^a	Max conducted: 25 dBm, per port: 22 dBm
Receiver Sensitivity per Radio	20 MHz: -94 dBm (HE0), -68dBm (HE9), -63 dBm (HE11) 40 MHz: -91 dBm (HE0), -65 dBm (HE9), -61 dBm (HE11) 80 MHz: -88 dBm (HE0), -63 dBm (HE9), -58 dBm (HE11)
^a Subject to regulations and antenna type.

Advanced Features

Characteristics
Category	Features
Security ?	WPA2-Personal (CCMP), WPA2-Enterprise, WPA3-Personal (SAE/OWE), WPA3-Enterprise (Suite-B), 802.11w, 802.1X, SecureBoot (TPM), persistent security log
Ethernet/Network Routing & VPN ?	Fallback IP, IP Alias, MAC Change, 802.1Q VLAN support, Interface port protection, Static/Policy-based/Multicast routing, Multi-WAN support, CARP, DHCP Server/Client/Relay, DNS Server/Client, NTP Server/Client, RSTP, Firewall (L2 stateless/L3 stateful), IP Masquerading (NAT/NAPT), Port Forwarding (DNAT/SNAT), Stateless NAT (1-1 NAT)
Wireless	Up to 8 SSID assignments per radio, up to 512 client connections per radio, SSID masking, Client isolation, 802.11e (WME/WMM), 802.11r, 4addr, 802.1p QoS (L2/L3 mapping), Access Control (ACL), Automatic Channel Selection (ACS), Static/Dynamic VLAN per SSID, BSSID override
VPN	SSL Server/Client, IPsec, OpenVPN Client, Wireguard, GRE/GRETAP, VXLAN
Discovery	LLDP, SSDP, mDNS
Client Management	Equalization of airtime usage (ATF), Load balancing between 2.4 GHz and 5 GHz
Surveillance Functions	Integrated sensors and diagnostics, SNMP notifications (TRAP/INFO), Syslog
Equipment Management	SNMP v2c/v3 with USM authentication and encryption support, HTTP/HTTPS Web Interface and WebAPI with user authentication (local or LDAP), CLI (SSH and Telnet), Certificate management (SCEP), Dual Primary/Backup firmware
SNMP MIB Support	MIB-2, RFC1213, HOST-RESOURCES, BRIDGE, ETHERLIKE, IF-MIB, LLDP-MIB, UCD-SNMP-MIB, WESTERMO-SW6-MIB, WESTERMO-SW6-BRIDGE-MIB, WESTERMO-SW6-FIREWALL-MIB, WESTERMO-SW6-ICL-MIB

Approvals and Standards

Climate: EN 60068-2 [-1, -2, -30] environmental testing for electronic equipment.
EMC:
- EN 50121-4: Railway applications - Electromagnetic compatibility. Part 4: Emission and immunity of signaling and telecommunication apparatus.
- EN/IEC 61000-6-1: Immunity for residential environments.
- EN/IEC 61000-6-2: Immunity for industrial environments.
- EN/IEC 61000-6-3: Emissions for residential environments.
- EN/IEC 61000-6-4: Emissions for industrial environments.
- ETSI EN 301 489-1: Electromagnetic compatibility (EMC) and Radio spectrum Matters (ERM) for radio equipment - Part 1: Common technical requirements.
- ETSI EN 301 489-17: Electromagnetic compatibility (EMC) and Radio spectrum Matters (ERM) for radio equipment - Part 17: Specific conditions for broadband data transmission systems.
Mechanical (shock and vibration): EN 50125-3: Equipment for railway applications.
Radio Communication:
- ETSI EN 300 328: Wideband transmission systems; Data transmitting equipment operating in the 2.4 GHz ISM band.
- ETSI EN 301 893: 5 GHz high-performance radio local area network.
- ETSI EN 300 440: 5.8 GHz, short range devices.
- IEEE802.11: Wireless LAN MAC and PHY specifications.
- FCC-47-15: Radio frequency devices.
Security: EN/IEC 62368-1: Audio/video, information and communication technology equipment - Part 1: Safety requirements.

Order References

Ref.	Model	Description
3628-13101^a	Ibex-1310-T2G2.5 EU	Industrial Outdoor Dual Wi-Fi 6 Access Point, 12-48 VDC, PoE PD
3628-13102	Ibex-1310-T2G2.5 NA	Industrial Outdoor Dual Wi-Fi 6 Access Point, 12-48 VDC, PoE PD
3628-13111	Ibex-1310-T2G2.5-PoE EU	Industrial Outdoor Dual Wi-Fi 6 Access Point, PoE PD
3628-13112	Ibex-1310-T2G2.5-PoE NA	Industrial Outdoor Dual Wi-Fi 6 Access Point, PoE PD
3623-0799	X-code	Factory reset plug (Accessory)
^a Current version.

	Westermo Ibex-1310 Industrial Outdoor Wi-Fi 6 Access Point \| Technical Specifications Detailed specifications for the Westermo Ibex-1310, an industrial outdoor Wi-Fi 6 access point designed for demanding environments. Features dual-band 802.11ax, IP66 rating, wide temperature range, and robust cybersecurity.
	Westermo Ibex-1510 EN 50155 Wi-Fi 6 Access Point - Technical Specifications Detailed technical specifications for the Westermo Ibex-1510, an EN 50155 compliant Wi-Fi 6 access point designed for demanding railway applications. Features include dual-band Wi-Fi 6, high reliability, compact design, and robust environmental protection.
	Westermo Ibex-1310 Serie: Industrieller WiFi 6 Access Point für Außenanwendungen Der Westermo Ibex-1310 ist ein robuster, industrieller Dualband 802.11ax Wi-Fi 6 Access Point und Client für raue Umgebungen. Bietet hohe Geschwindigkeit, Cybersicherheit und Zuverlässigkeit für Fahrzeug- und stationäre Anwendungen.
	Westermo Ibex-1510 Series EN 50155 Wi-Fi 6 Access Point Datasheet Datasheet for the Westermo Ibex-1510 Series, a reliable, compact, and secure EN 50155 compliant Wi-Fi 6 Access Point and Client for railway and stationary applications. Features dual-band 802.11ax, M12 connectors, IP66 rating, and wide operating temperature range.
	Westermo Ibex-3510 Series EN 50155 Wi-Fi 6E Access Point The Westermo Ibex-3510 is a rugged, compact, and secure Wi-Fi 6E access point designed for onboard and stationary applications, meeting EN 50155 and EN 45545-2 standards for railway use. It features triple Wi-Fi 6/802.11ax interfaces, low power consumption, and advanced cybersecurity.
	Westermo Ibex-1510 Series EN 50155 Wi-Fi 6 Access Point Datasheet Datasheet for the Westermo Ibex-1510 series, a rugged EN 50155 certified Wi-Fi 6 access point designed for demanding railway and onboard applications. Features dual-band 802.11ax, M12 connectors, and wide operating temperature range.
	Westermo Ibex-3510 Series EN 50155 Wi-Fi 6E Access Point Westermo Ibex-3510 is a reliable, compact, and secure triple-band Wi-Fi 6E Access Point/Client designed for demanding railway and transportation environments. It supports simultaneous 2.4 GHz, 5 GHz, and 6 GHz bands with high-speed data transfer and advanced cybersecurity features.
	IbexOS Management Guide - Westermo Comprehensive guide to Westermo's IbexOS firmware, detailing features, configuration, and management for industrial wireless communication devices like Ibex-RT series.