Westermo Ibex-1510 Series EN 50155 Wi-Fi 6 Access Point

Overview

The Ibex-1510 is a dual-band 802.11ax Wi-Fi 6 Access Point/Client designed for railway and stationary applications. It offers reliable, efficient data transmission with high speeds, Airtime Fairness, Band Steering, and Client/Multi-AP steering. It can be used for passenger hotspots, remote access, data offloading, or as part of a TCMS network.

Its construction makes it ideal for the harsh operating environments found in trains, where the switch is exposed to constant vibrations, extreme temperatures, humidity, and demanding electromagnetic conditions.

A GORE-TEX® membrane protects against internal condensation. High-quality isolation between all interfaces allows direct connection to the vehicle's onboard power supply and protects against surges and spikes. The IP66 rating prevents water and dust ingress, even at the QMA connectors for quick connection.

An optimized design ensures a compact form factor with a very high MTBF for easy integration into space-constrained environments and low lifecycle costs. Thorough type testing by independent laboratories confirms compliance with various standards, including EN 50155.

The Ibex-1510's IbexOS operating system is based on Linux and equipped with the latest cybersecurity features and updates.

Key Features

Reliable, compact, and secure WLAN Access Point
Dual WiFi 6 802.11ax WLAN interfaces
Simultaneous 2.4 GHz and 5 GHz operation
Low power consumption
Cybersecurity features for critical infrastructure support
Designed for On Board use
EN 50155 and EN 45545-2 certified
Compact design with M12 connectors
IP66 rating and -40° to +70°C temperature range
Latest 802.11 design for maximum efficiency
IEEE 802.11ax for maximum efficiency
Client Management features
Flexible and easy setup

Technical Specifications

Dimensions

195 x 70 x 111 mm (7.68 x 2.76 x 4.37 Inch)

Enclosure

Full metal enclosure

Weight

1.45 kg without antennas

Operating Temperature

-40 to +70 °C

Protection Class

IP66

MTBF

424,000 hours (490,000 hours for PoE only)

Power Supply

24 to 110 VDC or IEEE 802.3 PoE Class 4

Nominal Power

14 W

PoE

PoE Class 4 (IEEE 802.3at Type 1 and 2 PD)

Interfaces

RF Antenna: 2 x QMA-compatible antenna connectors for Wi-Fi 6 2.4 GHz and 5 GHz (combined)
Ethernet: 2 x 10/100/1000/2.5G Base-T with M12 X-coded connectors

Wireless Solutions

Operating Modes: Access Point, Client, Bridge
Interfaces: Dual-Band (simultaneous for 2.4 GHz and 5 GHz) 2x2 MU-MIMO (total 4 spatial streams)
Supported Standards: IEEE802.11g, 802.11a, 802.11n, 802.11ac, 802.11ax
Frequency Range: 2.400 to 2.4835 GHz (2x2 MU-MIMO); 5.150 to 5.350 GHz, 5.470 to 5.725 GHz, 5.725 to 5.875 GHz (2x2 MU-MIMO)
Supported Data Rates: 2.4 GHz: Up to 802.11ax 40 MHz 2SS BW HE11: 573 Mbps; 5 GHz: Up to 802.11ax 80 MHz 2SS BW HE11: 1201 Mbps
RF Transmit Power 2.4 GHz: Max transmit power: 25 dBm, per port: 22 dBm
RF Transmit Power 5 GHz: Max transmit power: 25 dBm, per port: 22 dBm
Receive Sensitivity per WLAN Radio: 20 MHz: -94 dBm (HEO), -68 dBm (HE9), -63 dBm (HE11); 40 MHz: -91 dBm (HEO), -65 dBm (HE9), -61 dBm (HE11); 80 MHz: -88 dBm (HEO), -63 dBm (HE9), -58 dBm (HE11)

Features

Security: Open, WPA2-Personal (CCMP), WPA2-Enterprise, WPA3-Personal (SAE/OWE), WPA3-Enterprise (Suite-B), WPA2/3-Hybrid Mode (SAE+PSK), 802.11w, 802.1X, Security Log (persistent)
Network: Static/Policy/Multicast Routing, VLAN Support, Interface Port Protection, Static/Policy/Multicast Routing, Multi WAN Support, CARP, DHCP Server/Client/Relay, DNS Server/Client, NTP Server/Client, RSTP, Firewall Filter/Mangle (L2 stateless/L3 stateful), IP Masquerading (NAT/NAPT), Port Forwarding (DNAT/SNAT), stateless NAT (1:1 NAT)
WLAN: Up to 8 SSID assignments per radio, up to 512 client connections per radio, hidden SSID, AP Client Isolation, 802.11e (WME/WMM), 802.11r, 4addr, QoS (L2/L3 mapping), Access Control (ACL), Automatic Channel Selection (ACS), static/dynamic VLAN assignment per SSID, BSSID override
VPN: SSL Server/Client, IPsec, OpenVPN Client, Wireguard, GRE/GRETAP, VXLAN
Device Discovery: LLDP, SSDP, mDNS
Client Management: ATF (Air Time Fairness), Client distribution and load balancing between 2.4 GHz and 5 GHz, Multi-AP Client Steering, 802.11k, 802.11v
Monitoring Functions: Integrated monitoring sensors and diagnostic functions, SNMP Notifications (TRAP/INFO), Syslog
Device Management: SNMP v2c/v3 with USM authentication and encryption support, HTTP/HTTPS Web Interface and WebAPI with user authentication (local or LDAP), CLI (SSH and Telnet), Certificate Management (SCEP), Dual Firmware Support (Primary/Backup)
SNMP MIB Support: MIB-2, RFC1213, HOST-RESOURCES, BRIDGE, ETHERLIKE, IF-MIB, LLDP-MIB, UCD-SNMP-MIB, WESTERMO-SW6-MIB, WESTERMO-SW6-BRIDGE-MIB, WESTERMO-SW6-FIREWALL-MIB, WESTERMO-SW6-ICL-MIB, WESTERMO-SW6-NWM-MIB, WESTERMO-SW6-PWN-MIB

Approvals and Standards

Climate: EN 50155, OT4 Railway applications - Electronic equipment of railway vehicles
EMC: EN 50155, Railway applications - Electronic equipment of railway vehicles; EN 50121-3-2, Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock; ETSI EN 301 489-1, Electromagnetic compatibility for radio equipment and services - Part 1: Common technical requirements; ETSI EN 301 489-17, Electromagnetic compatibility for radio equipment and services - Part 17: Specific conditions for broadband data transmission systems
Mechanical (Shock and Vibration): EN 61373, Category 1, Class B
Insulation (Coordination and Test): EN 50155, Railway applications - Electronic equipment of railway vehicles
Radio Communication: ETSI EN 300 328, Broadband transmission systems - Data transmitting equipment operating in the 2.4 GHz ISM band and using broadband modulation techniques; ETSI EN 301 893, 5 GHz RLAN; ETSI EN 300 440, 5.8GHz, Short Range Radio (SRD); IEEE802.11, WLAN access control (MAC) and physical (PHY) specifications; FCC-47-15, wireless communication devices
Safety: EN/IEC 61010-1, Safety requirements for electrical equipment for measurement, control, and laboratory use; EN 45545-2, Fire protection in railway vehicles

Ordering Information

Art.-Nr.	Model	Description
3628-15101	Ibex-1510-T2G2.5 EU	Dual EN 50155 Wi-Fi 6 Access Point, 24...110 VDC, PoE PD
3628-15102	Ibex-1510-T2G2.5 NA	Dual EN 50155 Wi-Fi 6 Access Point, 24...110 VDC, PoE PD
3628-15111	Ibex-1510-T2G2.5-PoE EU	Dual EN 50155 Wi-Fi 6 Access Point, PoE PD
3628-15112	Ibex-1510-T2G2.5-PoE NA	Dual EN 50155 Wi-Fi 6 Access Point, PoE PD
3623-0799	Stecker für Werksreset, X-Code	Accessory

	Westermo Ibex-1510 EN 50155 Wi-Fi 6 Access Point - Technical Specifications Detailed technical specifications for the Westermo Ibex-1510, an EN 50155 compliant Wi-Fi 6 access point designed for demanding railway applications. Features include dual-band Wi-Fi 6, high reliability, compact design, and robust environmental protection.
	Westermo Ibex-1510 Series EN 50155 Wi-Fi 6 Access Point Datasheet Datasheet for the Westermo Ibex-1510 series, a rugged EN 50155 certified Wi-Fi 6 access point designed for demanding railway and onboard applications. Features dual-band 802.11ax, M12 connectors, and wide operating temperature range.
	Westermo Ibex-3510 Series EN 50155 Wi-Fi 6E Access Point The Westermo Ibex-3510 is a rugged, compact, and secure Wi-Fi 6E access point designed for onboard and stationary applications, meeting EN 50155 and EN 45545-2 standards for railway use. It features triple Wi-Fi 6/802.11ax interfaces, low power consumption, and advanced cybersecurity.
	Westermo Ibex-3510 Series EN 50155 Wi-Fi 6E Access Point Westermo Ibex-3510 is a reliable, compact, and secure triple-band Wi-Fi 6E Access Point/Client designed for demanding railway and transportation environments. It supports simultaneous 2.4 GHz, 5 GHz, and 6 GHz bands with high-speed data transfer and advanced cybersecurity features.
	Westermo Ibex-1310 Industrial Outdoor Wi-Fi 6 Access Point \| Technical Specifications Detailed specifications for the Westermo Ibex-1310, an industrial outdoor Wi-Fi 6 access point designed for demanding environments. Features dual-band 802.11ax, IP66 rating, wide temperature range, and robust cybersecurity.
	IbexOS Management Guide - Westermo Comprehensive guide to Westermo's IbexOS firmware, detailing features, configuration, and management for industrial wireless communication devices like Ibex-RT series.
	Westermo Ibex-RT-330-5G: EN 50155 5G Router for Railway Applications Westermo Ibex-RT-330-5G is a ruggedized mobile 5G router designed for onboard use in trains, trams, and other vehicles. It supports 3GPP Release 16 (5G NSA/SA), features a 5G sub 6 GHz 4x4 MIMO interface, and operates within a wide temperature range (-40°C to +70°C) and IP66 ingress protection. The router is EN 50155 and EN 45545-2 certified, offering high bandwidth, advanced firewall, and VPN connectivity for demanding railway applications.
	Westermo Ibex-RT-330-5G: 5G EN 50155 Railway Router Westermo Ibex-RT-330-5G is a high-performance 5G mobile router designed for onboard railway applications. It supports 3GPP Release 16, 5G NSA/SA, and features a 5G sub 6 GHz MIMO 4x4 interface, dual SIM support, and compliance with EN 50155 and EN 45545-2 standards. The router offers advanced firewall capabilities, high-performance VPN connectivity, and a wide operating temperature range.