Westermo Ibex-3510 Series EN 50155 Wi-Fi 6E Access Point
Key Features
- Reliable, compact and secure WLAN access point
- Triple Wi-Fi 6 / 802.11ax WLAN interfaces
- Concurrent 2.4 GHz, 5 GHz and 6 GHz
- Low power consumption
- Cybersecurity features supporting critical infrastructure installations
- Designed for onboard usage
- EN 50155 and EN 45545-2 certified
- Compact design with M12 interfaces
- IP66 and -40° - +70°C operating range
- Latest generation 802.11 design
- IEEE 802.11ax for maximum efficiency
- Client management features
- Flexible and easy setup
The Ibex-3510 is a concurrent triple-band 802.11ax Wi-Fi 6E access point and client product for onboard and stationary applications. It provides reliable efficient high-speed data transfers, airtime fairness, band steering, client steering and multi-AP steering. This enables optimized use for passenger hotspot applications, remote maintenance access, data offloading or it can be part of a TCMS network.
The Ibex-3510 is designed to withstand the tough environment on-board trains, exposed to constant vibration, extreme temperatures, humidity and a demanding electromagnetic environment.
A GORE-TEX® membrane prevents internal condensation. High-level isolation between all interfaces enables direct connectivity to vehicle auxiliary power and protects against overvoltage and spikes/surge. IP66 protection prevents ingress of water and dust even at the quick connect QMA connectors.
An overall optimised design results in a compact form factor in combination with very high MTBF for easy integration in space restricted installations and low lifecycle cost.
Thorough type testing at independent labs certifies the compliance to a wide range of standards, including EN 50155.
The Ibex-3510 is running Westermo's robust and easy to use Linux based IbexOS operating system with latest cybersecurity features and updates.
Specifications - Ibex-3510 series
Front view showing M12 connectors and status LEDs. Side view showing QMA antenna connectors and mounting points. Top view showing heat dissipation fins. Rear view showing power and Ethernet connectors.
Technical data
| Attribute | Value |
|---|---|
| Dimensions (W x H x D) | 195 x 80 x 111 mm (7.68 x 3.15 x 4.37 inches) |
| Housing | Full metal |
| Weight | 1.65 kg without antennas |
| Operating temperature | -40 to +70°C (-40 to +158°F) |
| Ingress protection | IP66 |
| MTBF | 319,000 hours |
| MTBF (PoE only) | 377,000 hours |
| Rated voltage | 24 to 110 VDC or PoE IEEE 802.3 Class 4 |
| Rated power | 17 W |
| PoE | PoE Class 4 (IEEE 802.3at type 1 and 2 PD) |
Interface
| Interface | Details |
|---|---|
| RF antenna | 2 x QMA compatible antenna connectors for Wi-Fi 6 2.4 GHz and 5 GHz (combiner) 4 x QMA compatible antenna connectors for Wi-Fi 6E for 6 GHz |
| Ethernet | 2 x 10/100/1000/2.5G Base-T with M12 X-coded connectors |
Wireless Features
| Feature | Details |
|---|---|
| Operating modes | Access Point, Client, Bridge |
| Interfaces | Tri-Band Concurrent 2x2/4x4 MU-MIMO (total 8 Spatial Streams) |
| Standards supported | IEEE 802.11g, 802.11a, 802.11n, 802.11ac, 802.11ax |
| Frequency range | 2.400 to 2.4835 GHz (2x2 MU-MIMO) 5.150 to 5.350 GHz, 5.470 to 5.725 GHz, 5.725 to 5.875 GHz (2x2 MU-MIMO) 5.925 to 7.125 GHz (4x4 MU-MIMO) |
| Data rates supported | 2.4 GHz: Up to 802.11ax 40 MHz 2SS BW HE11: 573 MBit/s 5 GHz: Up to 802.11ax 80 MHz 2SS BW HE11: 1201 MBit/s 6 GHz (Wi-Fi 6E): Up to 802.11ax 160 MHz 4SS BW HE11: 4804 MBit/s |
| RF transmit power 2.4 GHz | Max. conducted transmit power: 25 dBm, per port: 22 dBm |
| RF transmit power 5 GHz | Max. conducted transmit power: 25 dBm, per port: 22 dBm |
| RF transmit power 6 GHz | Max. conducted transmit power: 26 dBm, per port: 20 dBm |
| Receiver sensitivity per radio | 20 MHz: -94 dBm (HEO), -68dBm (HE9), -63 dBm (HE11) 40 MHz: -91 dBm (HEO), -65 dBm (HE9), -61 dBm (HE11) 80 MHz: -88 dBm (HEO), -63 dBm (HE9), -58 dBm (HE11) 160 MHz: -85dBm (HEO), -60 dBm (HE9), -55 dBm (HE11) |
a.Depending on the regulatory limitations and selected antennas
b.Typical, all antenna chains connected, temperature 25° C
Features
Security
Wi-Fi Security Open, WPA2-Personal (CCMP), WPA2-Enterprise, WPA3-Personal (SAE/OWE), WPA3-Enterprise (Suite-B), WPA2/3-Hybrid-Mode (SAE+PSK), 802.11w, 802.1X, Security Log (persistent)
Networking
Fixed fallback IP, IP Aliases, MAC override, VLAN support, Interface Port Protection, Routing Static/Policy/Multicast, Multi WAN support, CARP, DHCP Server/Client/Relay, DNS Server/Client, NTP Server/Client, RSTP, Firewall Filter/Mangle (L2 stateless/L3 stateful), IP Masquerading (NAT/NAPT), Port Forwarding (DNAT/SNAT), Stateless NAT (1-1 NAT)
Wireless
Up to 8 SSID assignments per radio, up to 512 client connections per radio, SSID Hide, AP Client Isolation, 802.11e (WME/WMM), 802.11r, 4addr, QoS (L2/L3 mapping), Access Control (ACL), Automated Channel Selection (ACS), static/dynamic VLAN per SSID, BSSID override
VPN
SSL Server/Client, IPsec, OpenVPN Client, Wireguard, GRE/GRETAP, VXLAN
Discovery
LLDP, SSDP, mDNS
Client management
ATF (Air Time Fairness), Client Steering and Load Balancing between 2.4 GHz, 5 GHz and 6 GHz, Multi-AP Client Steering, 802.11k, 802.11v
Monitoring
Built-in monitoring sensors and diagnostics, SNMP notifications (TRAP/INFO), Syslog, CLI
Management
SNMP v2c/v3 with USM authentication and encryption support, HTTP/HTTPS web interface and WebAPI with user authentication (local or LDAP), CLI (SSH and Telnet), Certificate Management (SCEP), Dual Firmware Primary/Backup
SNMP MIB Support
MIB-2, RFC1213, HOST-RESOURCES, BRIDGE, ETHERLIKE, IF-MIB, LLDP-MIB, UCD-SNMP-MIB, WESTERMO-SW6-MIB, WESTERMO-SW6-BRIDGE-MIB, WESTERMO-SW6-FIREWALL-MIB, WESTERMO-SW6-ICL-MIB, WESTERMO-SW6-NWM-MIB, WESTERMO-SW6-PWN-MIB
Approvals and Standards
| Category | Standard |
|---|---|
| Climate | EN 50155, class OT4 Railway applications - Electronic equipment used on rolling stock EN 50155, Railway applications - Electronic equipment used on rolling stock |
| EMC | EN 50121-3-2, Railway applications - Electromagnetic compatibility, Part 3-2: Rolling stock - Apparatus ETSI EN 301 489-1, Electromagnetic compatibility (EMC) and Radio spectrum Matters (ERM) for radio equipment and services - Part 1: Common technical requirements ETSI EN 301 489-17, Electromagnetic compatibility (EMC) and Radio spectrum Matters (ERM) for radio equipment - Part 17: Specific conditions for Broadband Data Transmission Systems |
| Mechanical (Shock and vibration) | EN 61373, category 1, class B |
| Insulation (Coordination and test) | EN 50155, Railway applications - Electronic equipment used on rolling stock |
| Radio communication | ETSI EN 300 328, Wideband transmission systems; Data transmission equipment operating in the 2.4 GHz ISM band and using wide band modulation techniques ETSI EN 301 893, 5 GHz RLAN ETSI EN 300 440, 5.8GHz, Short Range Devices ETSI EN 303 687, 6 GHz RLAN IEEE802.11, Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications |
| Safety | EN/IEC 61010-1, Safety requirements for electrical equipment for measurement, control, and laboratory use EN 45545-2, Fire protection on railway vehicles |
Ordering information
| Art. no. | Model | Description |
|---|---|---|
| 3628-35101 | Ibex-3510-T2G2.5 EU | Triple EN 50155 Wi-Fi 6E Access Point, 24...110 VDC, PoE PD |
| 3628-35111 | Ibex-3510-T2G2.5-PoE EU | Triple EN 50155 Wi-Fi 6E Access Point, PoE PD |
| 3623-0799 | Factory Reset Plug X-code | Accessory |
Related Documents
 |
Westermo Ibex-3510 Series EN 50155 Wi-Fi 6E Access Point Westermo Ibex-3510 is a reliable, compact, and secure triple-band Wi-Fi 6E Access Point/Client designed for demanding railway and transportation environments. It supports simultaneous 2.4 GHz, 5 GHz, and 6 GHz bands with high-speed data transfer and advanced cybersecurity features. |
 |
Westermo Ibex-1510 EN 50155 Wi-Fi 6 Access Point - Technical Specifications Detailed technical specifications for the Westermo Ibex-1510, an EN 50155 compliant Wi-Fi 6 access point designed for demanding railway applications. Features include dual-band Wi-Fi 6, high reliability, compact design, and robust environmental protection. |
 |
Westermo Ibex-1510 Series EN 50155 Wi-Fi 6 Access Point Datasheet Datasheet for the Westermo Ibex-1510 Series, a reliable, compact, and secure EN 50155 compliant Wi-Fi 6 Access Point and Client for railway and stationary applications. Features dual-band 802.11ax, M12 connectors, IP66 rating, and wide operating temperature range. |
 |
Westermo Ibex-1510 Series EN 50155 Wi-Fi 6 Access Point Datasheet Datasheet for the Westermo Ibex-1510 series, a rugged EN 50155 certified Wi-Fi 6 access point designed for demanding railway and onboard applications. Features dual-band 802.11ax, M12 connectors, and wide operating temperature range. |
 |
Westermo Ibex-1310 Industrial Outdoor Wi-Fi 6 Access Point | Technical Specifications Detailed specifications for the Westermo Ibex-1310, an industrial outdoor Wi-Fi 6 access point designed for demanding environments. Features dual-band 802.11ax, IP66 rating, wide temperature range, and robust cybersecurity. |
 |
Westermo Ibex-RT-330-5G: EN 50155 5G Router for Railway Applications Westermo Ibex-RT-330-5G is a ruggedized mobile 5G router designed for onboard use in trains, trams, and other vehicles. It supports 3GPP Release 16 (5G NSA/SA), features a 5G sub 6 GHz 4x4 MIMO interface, and operates within a wide temperature range (-40°C to +70°C) and IP66 ingress protection. The router is EN 50155 and EN 45545-2 certified, offering high bandwidth, advanced firewall, and VPN connectivity for demanding railway applications. |
 |
IbexOS Management Guide - Westermo Comprehensive guide to Westermo's IbexOS firmware, detailing features, configuration, and management for industrial wireless communication devices like Ibex-RT series. |
 |
Westermo Ibex-RT-630-5G: 5G and WLAN Router for Mobile Applications The Westermo Ibex-RT-630-5G is a robust 5G mobile router designed for demanding onboard applications in trains, trams, locomotives, mining vehicles, and buses. It offers high-performance connectivity, advanced security features, and compliance with railway industry standards. |