Resistex Miks LED Downlight

ℹ️ Product Information

This document provides installation instructions for the Resistex Miks LED downlight.

Product Name: Miks

Brand: Resistex

Features: Adjustable orientation, low luminance.

Document Version: V1.1 - 09.22

⚠️ Safety Notes

• Never work when voltage is present on the luminaire.
• The installation must be performed by a professional installer in compliance with the standards and regulations relating to electrical installations.
• Risk of electrostatic discharges (ESD Norm). Handle with precautions.
• Please observe the notes and steps described in the mounting instructions.

? Maintenance Instructions

• Do not use chemicals or abrasive products to clean the fixture.
• Keep these instructions for dismantling or future maintenance.
• Additional information about RESISTEX luminaires can be consulted on the website: www.resistex-sa.com.
• RESISTEX cannot be responsible for any misuse of the product.

⚙️ Installation Steps

Step 1: Prepare Mounting Hole

Cut a hole in the mounting surface with a diameter of 69 mm (+/- 1 mm).

Diagram Description: Shows the required cutout dimensions for installation: a circle with a diameter of 69 mm (+/- 1 mm).

Step 2: Insert Fixture

Insert the fixture into the prepared ceiling cutout.

Diagram Description: Illustrates inserting the fixture into the prepared ceiling cutout.

Step 3: Secure Fixture

Rotate the fixture to secure it within the mounting hole.

Diagram Description: Depicts rotating the fixture to secure it within the mounting hole.

Step 4: Wire Connection

Connect the electrical wires using the provided connector. Open the connector terminals by pressing down on the levers.

Insert the live (L) and neutral (N) wires into the corresponding terminals.

Close the connector terminals to secure the inserted wires.

Diagram Description: Shows the electrical connection process using a wire connector. The connector has terminals labeled L (Live) and N (Neutral). It illustrates opening the connector terminals by pressing levers, inserting wires, and closing the terminals.

Step 5: Final Installation

Push the fixture into the ceiling recess, ensuring it is firmly seated.

Diagram Description: Shows the fixture being pushed into the ceiling recess, completing the installation.

Step 6: Connection Verification

Electrical connection verification: The graph with a green checkmark (✔️) indicates a correct connection, showing a stable waveform. The graph with a red cross (❌) indicates an incorrect connection, showing an unstable or faulty waveform.

Diagram Description: Electrical connection verification. The graph with a green checkmark (✔️) indicates a correct connection, showing a stable waveform. The graph with a red cross (❌) indicates an incorrect connection, showing an unstable or faulty waveform.

Step 7: Completed Installation

The Miks downlight is now installed in the ceiling.

Diagram Description: A view of the fully installed Miks downlight in a ceiling.

? Specifications & Certifications

IP Rating: IP65

IK Rating: IK07

Electrical Class: Class II

Certifications: ROHS, CE

Warranty: Information not detailed in this document.