Resistex Miks LED Downlight Installation Guide

Options / Accessories

Orientable / Adjustable

1. Step 1: Diagram shows a circular fixture with an arrow indicating rotation for adjustment.
2. Step 2: Diagram shows the fixture being pushed upwards into a ceiling cutout.
3. Step 3: Diagram shows the fixture being rotated to lock it in place.

Basse Luminance / Low Light

1. Step 1: Diagram shows the fixture with its diffuser.
2. Step 2: Diagram shows the fixture being pushed upwards into a ceiling cutout.
3. Step 3: Diagram shows the fixture being secured.

Installation Instructions

1. Step 1: Cutout Preparation
   Diagram shows a circular cutout in a ceiling with dimensions Ø69 (+/-1mm).
2. Step 2: Fixture Insertion
   Diagram shows the Miks fixture being inserted into the prepared ceiling cutout.
3. Step 3: Securing the Fixture
   Diagram shows the fixture being rotated to engage its securing mechanism and lock it into the ceiling.
4. Step 4: Wiring Preparation
   Diagram shows a close-up of the electrical connector block and the wires being prepared for connection.
5. Step 5: Connecting Wires
   Diagram shows wires being inserted into the connector block terminals.
6. Step 6: Terminal Connection (L/N)
   Diagram shows the connector block with terminals labeled 'L' (Line) and 'N' (Neutral), indicating where the respective wires should be connected.
7. Step 7: Final Wiring Check
   Diagram shows the connector block with L and N terminals clearly marked, and wires inserted.
8. Step 8: Fixture Secured
   The Miks fixture is shown fully installed and secured in the ceiling.
9. Step 9: Polarity/Connection Check
   Diagram illustrates correct (✔️) and incorrect (❌) electrical connections. The correct connection is represented by a smooth waveform, while the incorrect one shows a sharp, problematic waveform.
10. Step 10: Completed Installation
    A view of the ceiling with the Miks downlight installed and flush.

Safety Notes

• Never work on the luminaire when it is live (under voltage).
• Installation must be performed by a professional installer, adhering to electrical installation standards and regulations.
• Beware of electrostatic discharges (ESD Norm). Handle with necessary precautions.
• Please observe the notes and steps described in the mounting instructions.

Maintenance Instructions

• Do not use chemicals or abrasive products to clean the fixture.
• Keep these instructions for dismantling or future maintenance.
• Additional information about RESISTEX luminaires is available on the website www.resistex-sa.com.
• RESISTEX is not responsible for any misuse of the product.

Company Information & Certifications

Manufacturer: RESISTEX EXPLOITATION

Address: 11 Quai de la Banquière CS 80010, 06730 Saint-André-de-la-Roche - France

Contact: Tél. 04 93 276 276 - Fax 04 93 276 280 - contact@resistex-sa.com

Website: www.resistex-sa.com

Certifications:

• RoHS Compliant
• IP65 (Ingress Protection)
• IK07 (Impact Protection)
• Class II (Electrical Safety)
• CE Marked
• 5 Year Warranty