ACTIVESHOP Marathon K35 Mini Nail Drill User Manual

Introduction

The Marathon K35 Mini is a professional nail drill characterized by high quality, compact dimensions, and modern design. Its clear and legible control panel, along with intuitive operation, provides excellent working capabilities for both experienced and beginner users.

The machine is equipped with a powerful head generating 2.9 Ncm of torque, allowing it to reach maximum power at just 3000 RPM. Head vibration is completely eliminated, and its ergonomic shape and low weight ensure comfortable handling.

The drill features a TWIST-LOCK bit holder, enabling bit changes with a single movement. The drill can be operated via the base unit or a foot pedal. An optional head holder can also be attached to the device.

Product Overview and Features

The Marathon K35 Mini nail drill is designed for professional use in cosmetic procedures. It offers precise control and efficient operation for various nail care tasks.

Key Features:

• High-quality construction
• Compact and ergonomic design
• Powerful motor with 2.9 Ncm torque
• Variable speed control up to 30,000 RPM
• Forward and reverse rotation control
• TWIST-LOCK bit holder for quick bit changes
• Optional foot pedal operation
• Clear RPM display

Parts Identification

• 1. Control unit
• 2. Speed regulator dial
• 4. Rotation direction switch
• 5. On/Off switch
• 6. Rotation direction indicator (green/red)
• 8. Head connector socket
• Foot pedal socket
• Power cable
• RPM display
• Pause button

Inserting and Removing Bits

Follow these steps for safe and easy bit replacement:

1. To remove a bit, turn the head handle clockwise [➡️] until it clicks into place, then pull out the bit.
2. To lock a new bit, turn the handle counter-clockwise [⬅️] until it clicks into place.
3. Keep the bit holder and the bit clean before reassembly.
4. Important: Do not use bent, asymmetrical, or damaged bits. Always use standard bits.

Caution! Unlocking the handle while the machine is running will damage the machine. Replacing bits while the motor is running can damage the clutch. Such damage is not covered by warranty. Bits must be changed in the open holder position (unlocked), and the milling machine must be turned off during this time.

Recommended Speeds by Bit Diameter

The following table provides recommended maximum RPM based on the diameter of the milling bit:

Technical Specifications

Base Unit

Model: K35 Mini

Drill Head Specifications

The following table details specifications for various compatible drill heads:

General Technical Data:

• Power Supply: 220-240 V / 50-60 Hz
• Ergonomic housing
• Forward and reverse rotation
• On/Off switch (No. 5) and continuous speed regulator (No. 2) from 0 to 35 (representing thousands of RPM)
• TWIST-LOCK handle (bit change in one movement)
• Standard bit holder diameter: 2.32 mm
• Torque: 2.9 Ncm

Troubleshooting

Problem: The milling machine does not turn on.

• Check if it is plugged in - connect the nail drill to the power supply.
• Check if the milling machine is switched on - turn on the milling machine using the switch (No. 2 in the diagram).
• Check if the hand/foot switch (No. 5 in the diagram) is set to "Hand" position.
• Check if the head cable is damaged - replace the head cable (available from ACTIVESHOP).
• Check if the power cable is damaged - contact ACTIVESHOP service.
• Check if the voltage selector switch (No. 8 in the diagram) is set to 220 V. If not, and the device is plugged in, the selector is damaged - contact ACTIVESHOP service for paid repair.

Problem: The head is overheating.

• Check if the TWIST-LOCK is properly closed.
• Caution: Bits must be changed when the milling machine is OFF, using the switch (No. 2 in the diagram). Turning the speed regulator dial (No. 2 in the diagram) to minimum does not turn the machine off, but only reduces its speed to the minimum (not visible to the naked eye). Changing a bit while the machine is on at minimum speed can cause the head to overheat and damage the bit (this is not covered by warranty).

Attention! Do not immerse the heads. Do not disinfect with excessive amounts of liquid. Water or disinfectant liquid entering the head can damage it. Before possible disinfection, remove dust from the head. It is recommended to maintain the head with specialized cleaning agents.

Safety Precautions

This device is professional equipment intended for cosmetic procedures. Its use should be supervised by qualified cosmetic personnel to avoid undesirable effects during treatment.

1. Do not disassemble or attempt to use the device for purposes other than those specified in this manual. All maintenance and repairs must be performed only by an authorized service technician (ACTIVESHOP Sp. z o.o.).
2. Do not install or use the device near liquids, in wet areas, or with wet hands to prevent liquids from entering the device.
3. Immediately disconnect the device from the power outlet and contact the authorized service center of ACTIVESHOP Sp. z o.o. in the following cases:
   • a) liquid has entered the device,
   • b) the device emits an unusual smell, smoke, or makes unusual noises,
   • c) the power cord is damaged,
   • d) the device has been dropped or its casing is damaged.
4. Do not place any objects on the cables. Do not install the device where someone can trip over the power cable.
5. For safety, unplug the power cord from the outlet whenever you finish working with the device.
6. Do not insert anything into the device's openings. If a foreign object enters an opening, unplug the cable and contact the distributor or manufacturer.
7. Do not place the device on an unstable trolley, shelf, or vehicle. The device may be damaged if it falls.
8. To ensure a fixed service life for the device, it is recommended to observe a one-minute interval before turning it on again after turning it off, and vice versa (between switching on and off).
9. The power source must comply with the specifications indicated on the nameplate. Otherwise, there is a risk that the device may not function correctly, be damaged, or even burn out.

CAUTION:

1. If the power cord is damaged or other malfunctions occur, contact an authorized service center to avoid hazards.
2. This device may be used by children aged 8 and above, and by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, provided they are supervised or have been instructed on how to use the device safely and understand the associated risks.
3. The equipment is not intended for play by children. Do not allow children to play with the device.
4. Do not leave the device unattended if children or persons without sufficient knowledge of its use are nearby.
5. This electrical device is not a toy. Improper use or contact with the electrical device can pose a health hazard or lead to death, so the device must be used and stored out of reach of children.

Device Disposal

Used electrical devices, accessories, and packaging should be disposed of at recycling centers in accordance with environmental protection principles. Do not dispose of electrical devices with household waste. Observe the regulations for this type of disposal.

To protect the environment, in accordance with Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), used electrical equipment must be collected separately and then handed over to electronic and electrical equipment collection points.

Used and old devices contain fully recyclable components, so they must be sent for recycling. Therefore, they should be handed over to appropriate collection points, as well as ACTIVESHOP Ltd.

Storage and Transportation

The device must be transported at a temperature from (-) 20 °C to (+) 50 °C only in its original packaging. The device should be stored in a well-ventilated room where relative humidity does not exceed 75%. Operating temperature is from (+) 10 °C to (+) 40 °C.

During storage and transportation, the device must not be thrown or dropped, subjected to mechanical impacts, or atmospheric influences.