SUNDVIK Changing Table/Chest of Drawers
⚠️ IMPORTANT SAFETY INFORMATION: Furniture tip-over can cause serious or fatal crushing injuries. ALWAYS secure this furniture to the wall using the provided tip-over restraints. To further reduce the risk of serious injury and death from tip-overs: Place heaviest items in the lower drawer. Do not set TVs or other heavy objects on top of this product. Never let children climb or hang on drawers, doors, or shelves.
Tools Required
- Phillips head screwdriver
- Flat head screwdriver
- Hammer
- Pencil
- Drill with drill bits (Ø8mm, Ø3mm)
Parts Included
The following parts and hardware are included. Quantities are indicated.
- Frame/Base Components: Various wooden panels and supports.
- Drawer Runners: Metal slides for drawers.
- Changing Table Top Components: Panels and hinges for the top section.
- Drawers: Components for assembling drawers.
- Hardware:
- Dowels (e.g., 101350, 101354)
- Screws (various types and sizes, e.g., 106989, 109048, 121714, 109049, 100823, 100481, 114613, 107271, 109510, 100136, 122332, 145718, 110630, 119030, 100347, 10143360, 152526, 119976)
- Cam locks and cam bolts (e.g., 105042, 10065533)
- Handles (e.g., 117616)
- Hinges (e.g., 101360)
- Wall attachment hardware (e.g., 109049, 100823, 119256)
Assembly Instructions
Step 1: Prepare Base Frame
Assemble the base frame by connecting the side panels and bottom supports. Use dowels and screws as indicated. Attach drawer runners to the side panels.
Diagram shows connecting base frame pieces with dowels and screws, and attaching drawer runners.
Step 2: Attach Drawer Runners
Securely attach the drawer runners to the inside of the side panels using screws.
Close-up view showing screws being inserted into drawer runners and side panels.
Step 3: Connect Side Panels
Connect the main side panels to the base structure using dowels and screws.
Diagram shows side panels being attached to the base with screws and dowels.
Step 4: Attach Back Supports
Insert dowels and screws to attach the back support pieces to the frame.
Diagram shows dowels and screws securing back support pieces.
Step 5: Assemble Top Frame
Assemble the frame for the changing table top. Connect the top frame pieces using dowels and screws.
Diagram shows assembly of the top frame sections.
Step 6: Attach Hinges to Top Frame
Attach the hinges to the top frame components using screws.
Close-up showing hinges being screwed onto the top frame.
Step 7: Attach Vertical Supports
Insert vertical support pieces into the base frame, securing them with dowels.
Diagram shows vertical supports being inserted into the base.
Step 8: Secure Vertical Supports
Secure the vertical supports with additional hardware, such as cam locks and bolts.
Close-up showing cam bolts and locks securing vertical supports.
Step 9: Attach Side Panels to Vertical Supports
Attach the main side panels to the vertical supports using the provided hardware.
Diagram shows side panels being attached to the vertical supports.
Step 10: Attach Back Panels
Slide or attach the back panels into place, securing them with screws or other fasteners.
Diagram shows back panels being fitted and secured.
Step 11: Assemble Drawer Sides
Connect the sides of the drawers using dowels and screws.
Diagram shows drawer sides being assembled with dowels and screws.
Step 12: Attach Drawer Fronts
Attach the drawer fronts to the assembled drawer sides using screws.
Diagram shows drawer fronts being attached to drawer sides.
Step 13: Attach Drawer Bottoms
Slide the drawer bottoms into the grooves and secure them.
Diagram shows drawer bottoms being inserted and secured.
Step 14: Attach Drawer Runners to Drawers
Attach the corresponding drawer runners to the sides of the assembled drawers.
Close-up showing drawer runners being attached to the drawer sides.
Step 15: Attach Drawer Handles
Attach the drawer handles to the drawer fronts using screws.
Diagram shows drawer handles being screwed onto drawer fronts.
Step 16: Assemble Top Section Frame
Assemble the frame for the changing table top, connecting the pieces with screws.
Diagram shows assembly of the top section frame.
Step 17: Attach Hinges to Top Section
Attach the hinges to the top section frame using screws.
Close-up showing hinges being attached to the top section frame.
Step 18: Attach Top Section Supports
Secure the top section supports using cam locks and bolts.
Close-up showing cam locks and bolts securing top section supports.
Step 19: Attach Top Section Back Panel
Attach the back panel of the top section using screws.
Diagram shows the back panel of the top section being attached.
Step 20: Assemble Drawer Box
Assemble the drawer box structure using dowels and screws.
Diagram shows assembly of drawer boxes.
Step 21: Attach Drawer Sides to Front/Back
Connect the drawer sides to the front and back panels using screws.
Diagram shows drawer sides being attached to drawer front and back panels.
Step 22: Attach Drawer Runners to Drawer Sides
Attach the drawer runners to the sides of the drawer boxes using screws.
Close-up showing drawer runners being attached to drawer sides.
Step 23: Assemble Drawer Front Support
Assemble the front support piece for the drawer using dowels and screws.
Diagram shows assembly of drawer front support.
Step 24: Attach Drawer Front Support
Attach the assembled drawer front support to the drawer box using dowels.
Diagram shows drawer front support being attached to the drawer box.
Step 25: Attach Drawer Runners to Main Unit
Attach the drawer runners to the main unit frame using screws.
Close-up showing drawer runners being attached to the main unit.
Step 26: Install Drawer Slides
Install the drawer slides onto the main unit frame, securing them with screws.
Diagram shows drawer slides being installed and secured.
Step 27: Attach Top Frame to Main Unit
Connect the assembled top frame to the main unit using screws.
Diagram shows the top frame being attached to the main unit.
Step 28: Attach Hinges to Top Panel
Attach the hinges to the top panel of the changing table section.
Close-up showing hinges being attached to the top panel.
Step 29: Secure Hinges
Secure the hinges with screws.
Close-up showing screws securing the hinges.
Step 30: Attach Top Panel to Main Unit
Attach the top panel to the main unit, aligning it with the frame and securing with screws.
Diagram shows the top panel being attached to the main unit.
Step 31: Attach Wall Fastener Bracket
Attach the wall fastener bracket to the unit using screws.
Close-up showing the wall fastener bracket being attached.
Step 32: Place Top Section
Place the assembled top section onto the main unit.
Diagram shows the top section being lowered onto the main unit.
Step 33: Secure Top Section
Secure the top section to the main unit using cam locks and bolts.
Close-up showing cam locks and bolts securing the top section.
Step 34: Attach Top Section Side Panels
Attach the side panels of the top section using screws.
Diagram shows side panels of the top section being attached.
Step 35: Drill Holes for Top Panel
Drill pilot holes for attaching the top panel.
Diagram shows a drill being used to make holes.
Step 36: Attach Top Panel
Attach the top panel to the unit using screws and cam locks.
Close-up showing screws and cam locks securing the top panel.
Step 37: Attach Changing Table Mechanism
Attach the changing table mechanism (hinges and supports) to the top panel and the main unit.
Diagram shows attachment of the changing table mechanism components.
Step 38: Assemble Drawer Base
Assemble the base for the drawers, connecting the side and bottom pieces.
Diagram shows assembly of drawer bases.
Step 39: Attach Drawer Sides to Base
Attach the drawer sides to the assembled drawer base using dowels and screws.
Diagram shows drawer sides being attached to the drawer base.
Step 40: Attach Drawer Runners
Attach the drawer runners to the drawer sides using screws.
Close-up showing drawer runners being attached to drawer sides.
Step 41: Insert Drawer Back Panel
Insert the back panel into the drawer assembly.
Diagram shows the back panel being inserted into the drawer.
Step 42: Attach Drawer Front
Attach the drawer front to the assembled drawer box.
Diagram shows the drawer front being attached.
Step 43: Secure Drawer Front
Secure the drawer front with screws.
Close-up showing screws securing the drawer front.
Step 44: Attach Drawer Handles
Attach the drawer handles to the drawer fronts using screws.
Close-up showing drawer handles being attached.
Step 45: Attach Drawer Slides to Drawers
Attach the drawer slides to the sides of the drawers using screws.
Close-up showing drawer slides being attached to drawers.
Step 46: Insert Drawers
Slide the assembled drawers into the main unit.
Diagram shows drawers being inserted into the unit.
Step 47: Attach Drawer Knobs
Attach the drawer knobs to the drawer fronts using screws.
Close-up showing drawer knobs being attached.
Step 48: Final Check
Ensure all parts are securely fastened and the unit is stable. The changing table top should operate smoothly.
Diagram shows the completed unit with a drawer partially open and a warning symbol indicating final checks.
Wall Securing Instructions
It is crucial to secure the furniture to the wall to prevent tip-over accidents. Follow these steps using the provided wall attachment hardware:
- Identify a suitable location on the wall, preferably into a wall stud.
- Attach the provided bracket to the back of the furniture using the appropriate screws.
- Mark the corresponding position on the wall.
- Drill holes in the wall if necessary (use appropriate wall anchors if not drilling into a stud).
- Secure the furniture to the wall by attaching the bracket to the wall using the provided screws and anchors.
Diagrams illustrate attaching the bracket to the furniture and then to the wall.
