SUNDVIK

Important Safety Information

⚠️ WARNING

Serious or fatal crushing injuries can occur from furniture tip-over. ALWAYS secure this furniture to the wall using tip-over restraints.

To further reduce the risk of serious injury and death from tip-overs:

Place heaviest items in the lower drawer.
Do not set TVs or other heavy objects on top of this product.
Never let children climb or hang on drawers, doors, or shelves.

[Icon: ⚠️. Illustration: Furniture tipping over. Illustration: Child climbing on furniture (❌). Illustration: Heavy object like a TV on top of furniture (❌).]

Assembly Instructions

Step 1: Identify Components and Tools

Gather all parts and tools. Required tools include screwdrivers [screwdriver], a hammer [hammer], and a drill [drill] with 8mm and 3mm drill bits. The hardware includes various screws, dowels, cam locks, cam bolts, brackets, and connectors. The diagrams show specific part numbers for each item.

[Visual: Assortment of tools including screwdrivers, hammer, drill with bits. Various hardware pieces like screws, dowels, cam locks, cam bolts, brackets, and connectors are displayed with their respective part numbers.]

Step 2: Assemble Base Structure

Attach the side panels to the base. Insert four cam bolts (part 100481) into the pre-drilled holes on the base. Align the side panels with the base, ensuring the holes on the panels match the cam bolts. Secure the side panels by inserting and turning four cam locks (part 112614) clockwise [?] to tighten.

[Visual: Side panels being attached to a base structure using cam bolts and cam locks.]

Step 3: Connect Side Panels

Connect the side panels using the provided rails. Insert two cam locks (part 112614) into the designated holes on the side panels. Attach the connecting rails by aligning them with the cam bolts and securing them with the cam locks.

[Visual: Connecting rails being attached to the side panels.]

Step 4: Reinforce Frame

Insert eight wooden dowels (part 114613) into the side panels. Attach the top frame pieces by aligning them with the dowels and pre-drilled holes. Secure these pieces using eight cam bolts (part 100481) and eight cam locks (part 112614), turning the cam locks clockwise [?] to tighten.

[Visual: Top frame pieces being attached to the side panels using dowels, cam bolts, and cam locks.]

Step 5: Insert Dowels

Insert sixteen wooden dowels (part 101350) into the designated holes on the frame components.

[Visual: Wooden dowels being inserted into various parts of the frame.]

Step 6: Attach Drawer Slides (Frame)

Attach the drawer slide mechanisms to the side panels of the main unit. For the right side (marked 'R'), attach four screws (part 100347). For the left side (marked 'L'), attach four screws (part 100347). Ensure the slides are oriented correctly.

[Visual: Drawer slides being attached to the inner sides of the main furniture frame using screws.]

Step 7: Install Vertical Supports

Insert the vertical support pieces into the frame. Align the holes on the vertical supports with the corresponding holes on the frame and push them firmly into place [⬇️].

[Visual: Vertical support pieces being inserted into the main frame.]

Step 8: Secure Vertical Supports

Secure the vertical supports. Insert two cam bolts (part 10143360) into the frame. Then, secure the supports by inserting and turning two cam locks (part 122332) clockwise [?].

[Visual: Vertical supports being secured to the frame using cam bolts and cam locks.]

Step 9: Insert Back Panel

Slide the back panel into the grooves on the rear of the frame [⬅️]. Ensure it is fully seated and flush.

[Visual: Back panel being slid into the grooves of the furniture frame.]

Step 10: Secure Back Panel

Secure the back panel. Insert two cam bolts (part 10143360) into the frame and secure the panel by inserting and turning two cam locks (part 122332) clockwise [?].

[Visual: Back panel being secured to the frame using cam bolts and cam locks.]

Step 11: Prepare Drawer Sides

Prepare the drawer sides for assembly. Insert two wooden dowels (part 101350) into the holes on the drawer front/back pieces. Attach the drawer side panels to these pieces [➡️].

[Visual: Drawer side panels being attached to drawer front/back pieces using dowels.]

Step 12: Assemble Drawer Box

Connect the drawer front/back pieces to the drawer side panels. Use the provided hardware to secure them together, forming the basic drawer box structure.

[Visual: Drawer front, back, and side panels being joined to form a box.]

Step 13: Secure Drawer Assembly

Secure the drawer assembly. Insert two cam bolts (part 10143360) into the drawer structure and secure them by inserting and turning two cam locks (part 122332) clockwise [?].

[Visual: Drawer assembly being secured with cam bolts and cam locks.]

Step 14: Insert Drawer Bottom

Slide the drawer bottom panel into the grooves of the assembled drawer sides [⬇️]. Ensure it is fully seated and flush.

[Visual: Drawer bottom panel being slid into the grooves of the drawer box.]

[Note: Incorrect assembly shown with crossed-out dowels 101350 and 101354: ❌ 101350, ❌ 101354.]

Step 15: Reinforce Drawer

Reinforce the drawer structure. Use two wooden dowels (part 101350) and two cam locks (part 122332) to further secure the drawer assembly.

[Visual: Drawer assembly being reinforced with dowels and cam locks.]

Step 16: Attach Drawer Slides (Drawer)

Attach the corresponding drawer slide components to the sides of the assembled drawer. Use four screws (part 100347) for each side.

[Visual: Drawer slides being attached to the outer sides of the drawer box using screws.]

Step 17: Attach Drawer Slides (Continued)

Continue attaching drawer slide components to the drawer. Use two screws (part 100823) and two screws (part 109048) for this step.

[Visual: More drawer slide components being attached to the drawer.]

Step 18: Attach Drawer Slides (Final)

Attach the final drawer slide components. Use six cam locks (part 122332) and six cam bolts (part 101350) to secure these parts.

[Visual: Final drawer slide components being attached to the drawer.]

Step 19: Secure Drawer Slides

Secure the drawer slides using four screws (part 109510).

[Visual: Drawer slides being secured with screws.]

Step 20: Assemble Drawer Box Frame

Assemble the drawer box frame. Insert four wooden dowels (part 101350) into the designated holes on the drawer sides.

[Visual: Drawer box frame components being assembled with dowels.]

[Note: Incorrect assembly shown with crossed-out dowels 101350 and 101354: ❌ 101350, ❌ 101354.]

Step 21: Attach Drawer Front/Back Panels

Attach the drawer front and back panels to the assembled drawer sides [⬅️]. Use the provided hardware to connect them.

[Visual: Drawer front and back panels being attached to the drawer sides.]

Step 22: Secure Drawer Assembly

Secure the drawer assembly. Insert four screws (part 100136) and four cam bolts (part 120189) into the structure. Then, use four cam locks (part 100001) to tighten and secure the assembly [?].

[Visual: Drawer assembly being secured with screws, cam bolts, and cam locks.]

Step 23: Attach Support Rails

Attach the support rails to the drawer assembly. Use two wooden dowels (part 101350) and two screws (part 114613). [Note: Incorrect assembly shown with crossed-out screws 114613 and 100481: ❌ 114613, ❌ 100481.]

[Visual: Support rails being attached to the drawer assembly.]

Step 24: Attach Support Rails (Continued)

Attach the remaining support rails. Use four wooden dowels (part 101350) and four screws (part 100481). [Note: Incorrect assembly shown with crossed-out dowels 101350 and 101354: ❌ 101350, ❌ 101354.]

[Visual: More support rails being attached to the drawer assembly.]

Step 25: Attach Drawer Slides

Attach the drawer slide components to the drawer. Use two wooden dowels (part 101350) and two cam locks (part 122332).

[Visual: Drawer slides being attached to the drawer.]

Step 26: Secure Drawer Sides

Secure the drawer sides using seven wooden dowels (part 101354).

[Visual: Drawer sides being secured with dowels.]

Step 27: Attach Top Frame

Attach the top frame to the main structure. Use six large screws (part 104323) to secure it.

[Visual: Top frame being attached to the main structure with screws.]

Step 28: Attach Hinges

Attach the hinge mechanisms to the top section. Use two hinge parts (part 10143360).

[Visual: Hinge mechanisms being attached to the top section.]

Step 29: Secure Hinges

Secure the hinges using two screws (part 152526) and two screws (part 10065533).

[Visual: Hinges being secured with screws.]

Step 30: Attach Drawer Runners to Unit

Attach the drawer runners to the main unit. Use six screws (part 100481). [Note: Incorrect assembly shown with crossed-out screws 100481 and 114613: ❌ 100481, ❌ 114613.]

[Visual: Drawer runners being attached to the main unit.]

Step 31: Attach Wall Restraint Bracket

Attach the wall restraint bracket to the unit. Use two screws (part 119256), two screws (part 109049), two screws (part 100823), and two more screws (part 109049). Also use part 105344.

[Visual: Wall restraint bracket being attached to the unit with screws.]

Step 32: Place Top Section

Place the top section onto the main unit. Align the slots and push down to secure [⬇️].

[Visual: Top section being placed onto the main unit.]

Step 33: Secure Top Section

Secure the top section using six cam locks (part 122332).

[Visual: Top section being secured with cam locks.]

Step 34: Attach Top Panel

Attach the top panel to the unit. Use two screws (part 100823) and two screws (part 109048).

[Visual: Top panel being attached to the unit with screws.]

Step 35: Secure Top Panel

Secure the top panel by drilling two pilot holes and using screws.

[Visual: Top panel being secured with screws, possibly requiring pilot holes.]

Step 36: Attach Drawer Slides to Drawer Box

Attach the drawer slides to the drawer box. Use two screws (part 100823) and two screws (part 109048).

[Visual: Drawer slides being attached to the drawer box.]

Step 37: Attach Hinges to Top Section

Attach the hinges to the top section. Use two screws (part 100001) and two screws (part 105042). [Note: Incorrect assembly shown with crossed-out parts and waste bin icon: ❌, ?️.]

[Visual: Hinges being attached to the top section.]

Step 38: Assemble Drawer Base

Assemble the base of the drawer. Insert four dowels (part 123492) into the base panel.

[Visual: Drawer base being assembled with dowels.]

Step 39: Attach Drawer Sides to Base

Attach the drawer sides to the base. Use four dowels (part 101345). [Note: Incorrect assembly shown with crossed-out parts: ❌.]

[Visual: Drawer sides being attached to the base with dowels.]

Step 40: Attach Drawer Runners

Attach the drawer runners to the drawer sides. Use four screws (part 110630).

[Visual: Drawer runners being attached to the drawer sides.]

Step 41: Insert Drawer Back Panel

Slide the drawer back panel into the grooves of the drawer sides [⬇️].

[Visual: Drawer back panel being slid into the grooves of the drawer sides.]

Step 42: Attach Drawer Top Panel

Attach the drawer top panel to the assembled drawer.

[Visual: Drawer top panel being attached to the drawer.]

Step 43: Secure Drawer Assembly

Secure the drawer assembly using four screws (part 145718).

[Visual: Drawer assembly being secured with screws.]

Step 44: Attach Drawer Runners

Attach the drawer runners to the drawer. Use four screws (part 119030).

[Visual: Drawer runners being attached to the drawer.]

Step 45: Attach Drawer Slides

Attach the drawer slides to the drawer. Use six screws (part 100347).