SUNDVIK

Important Safety Information

⚠️ WARNING: Children have died from furniture tipover. To reduce the risk of furniture tipover:

• ALWAYS install the anti-tip device provided.
• NEVER put a TV on this product.
• NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
• NEVER open more than one drawer at a time.
• Place heaviest items in the lowest drawers.

Read and follow each step of the instructions carefully.

Tools Required

The following tools are recommended for assembly:

• Phillips head screwdriver ?
• Flathead screwdriver ?
• Hammer ?
• Pencil ✏️
• Power drill with drill bits (⌀8mm, ⌀3mm) ??

Assembly Steps

Step 1

Prepare the base frame. Insert 4x dowels [107271] into the designated holes on the two side panels. Attach the two bottom crossbars to the side panels using 4x screws [100001]. Ensure the correct orientation.

Step 2

Attach the first set of horizontal supports. Insert 4x cam bolts [112614] into the side panels. Connect the two horizontal supports to the side panels using 4x cam locks [100481]. Tighten the cam locks by turning them clockwise ?.

Step 3

Attach the second set of horizontal supports. Insert another 4x cam bolts [112614] into the side panels. Connect these supports using 4x cam locks [100481] and tighten.

Step 4

Attach the remaining horizontal supports. Insert 8x cam bolts [114613] into the side panels. Connect the two remaining horizontal supports using 8x cam locks [100481] and tighten.

Step 5

Insert 16x wooden dowels [101350] into the pre-drilled holes on the horizontal supports. Ensure correct orientation; do not use dowels [101354] for this step.

Step 6

Attach the drawer runners to the main unit sides. For the right side (R), attach 4x drawer runner brackets [100347] using 4x screws [100347]. For the left side (L), attach 4x drawer runner brackets [100347] using 4x screws [100347].

Step 7

Insert the vertical side panels into the assembled frame, aligning them with the dowels inserted in Step 5. Ensure the panels are correctly oriented.

Step 8

Secure the vertical side panels to the top horizontal support. Insert 2x cam bolts [122332] into the top of each vertical side panel. Attach the top horizontal support using 2x cam locks [122332] and tighten.

Step 9

Attach the back panel by sliding it into the grooves on the vertical side panels and the base frame.

Step 10

Secure the back panel. Insert 2x cam bolts [122332] into the top of the vertical side panels. Attach the top horizontal support using 2x cam locks [122332] and tighten.

Step 11

Begin assembling the drawer box. Insert 2x dowels [101350] into the drawer side panels. Attach the drawer front/back panels using 2x screws [101354].

Step 12

Continue assembling the drawer box. Insert 2x dowels [101350] into the drawer side panels. Attach the drawer front/back panels using 2x screws [101354].

Step 13

Attach the drawer runners to the drawer sides. Insert 2x cam bolts [122332] into the drawer sides. Secure with 2x cam locks [122332].

Step 14

Attach the drawer front panel. Insert 2x dowels [101350] into the drawer front. Attach the drawer front to the drawer box using 2x screws [101350]. Ensure correct orientation; do not use dowels [101354].

Step 15

Attach the drawer runners to the drawer sides. Insert 2x cam bolts [122332] into the drawer sides. Secure with 2x cam locks [122332].

Step 16

Attach the drawer runners to the main unit. Insert 4x screws [100347] into the drawer runners on the main unit. Ensure correct orientation.

Step 17

Attach the drawer runners to the main unit. Insert 2x screws [100347] into the drawer runners on the main unit. Ensure correct orientation.

Step 18

Attach the drawer runners to the drawer sides. Insert 6x cam locks [122332] into the drawer sides. Secure with cam bolts.

Step 19

Attach the drawer front panel. Insert 4x screws [109510] into the drawer front. Ensure correct orientation.

Step 20

Assemble the drawer base. Insert 4x dowels [101350] into the drawer base. Ensure correct orientation; do not use dowels [101354].

Step 21

Attach the drawer side panels to the drawer front and back panels.

Step 22

Secure the drawer assembly. Insert 4x screws [120189] into the drawer assembly. Use cam locks [100136] and cam bolts [100001].

Step 23

Attach the drawer bottom panel. Insert 2x screws [101350] into the drawer bottom panel. Ensure correct orientation; do not use screws [114613] or dowels [101354].

Step 24

Attach the drawer bottom panel. Insert 4x screws [100481] into the drawer bottom panel. Use dowels [101350]. Ensure correct orientation; do not use dowels [101354].

Step 25

Attach the drawer runners to the drawer sides. Insert 2x cam bolts [122332] into the drawer sides. Secure with 2x cam locks [122332].

Step 26

Attach the drawer runners to the drawer sides. Insert 7x dowels [101354] into the drawer sides. Ensure correct orientation; do not use dowels [101350].

Step 27

Attach the top surface. Insert 6x screws [104323] into the top surface. Secure with cam locks [100001].

Step 28

Attach the changing top supports (hinges) [10143360] into the designated slots on the main unit.

Step 29

Secure the changing top supports. Insert 2x screws [152526] and 2x cam locks [10065533] into the changing top supports.

Step 30

Attach the drawer base. Insert 6x screws [100481] into the drawer base. Ensure correct orientation; do not use screws [114613].

Step 31

Install the anti-tip device. Insert 2x screws [109049] and 2x wall plugs [105344] into the wall. Attach the bracket [119256] to the unit using screws [100823].

Step 32

Place the assembled drawer unit into the main frame.

Step 33

Attach the drawer runners to the drawer sides. Insert 6x cam locks [122332] into the drawer sides. Secure with cam bolts.

Step 34

Attach the drawer runners to the main unit. Insert 2x screws [100001] into the drawer runners on the main unit. Ensure correct orientation.

Step 35

Secure the changing top. Use a drill to create pilot holes for the screws if needed. Insert 2x screws [100001].

Step 36

Attach the drawer runners. Insert 2x screws [109048] and 2x cam locks [100823].

Step 37

Attach the changing top. Insert 2x screws [100001] and 2x cam locks [105042].

Step 38

Assemble the drawer. Insert 4x dowels [123492] into the drawer sides. Attach the drawer front/back panels using 4x screws [101345].

Step 39

Attach the drawer front panel. Insert 4x dowels [101345] into the drawer front. Ensure correct orientation.

Step 40

Attach the drawer runners. Insert 4x cam locks [110630] into the drawer sides. Secure with cam bolts [110630].

Step 41

Slide the back panel into the grooves of the assembled drawer unit.

Step 42

Attach the top panel of the drawer unit. Ensure correct alignment and orientation.

Step 43

Secure the drawer unit. Insert 4x screws [145718] into the drawer unit.

Step 44

Attach the drawer runners. Insert 4x cam locks [119030] into the drawer sides. Secure with cam bolts.

Step 45

Attach the drawer runners. Insert 6x screws [100347] into the drawer runners.

Step 46

Attach the drawer to the unit. Insert 1x screw [123833] and 1x cam lock [105344].

Step 47

Attach the drawer to the unit. Insert 1x screw [105344] and 1x cam lock [105344].

Step 48

Attach the drawer knob. Insert 1x screw [119976] and 1x knob [100823].

Step 49

Insert the assembled drawer into the unit. Ensure it slides smoothly.