SUNDVIK
IKEA Logo: "IKEA Design and Quality IKEA of Sweden"
Important Safety Information
⚠️ WARNING: Serious or fatal crushing injuries can occur from furniture tip-over.
ALWAYS secure this furniture to the wall using tip-over restraints.
To further reduce the risk of serious injury and death from tip-overs:
- Place heaviest items in the lower drawer.
- Do not set TVs or other heavy objects on top of this product.
- Never let children climb or hang on drawers, doors, or shelves.
This warning is provided in multiple languages throughout the document.
Parts List and Tools
Before starting assembly, check that you have all parts and tools.
Tools Required:
- Phillips screwdriver
- Flathead screwdriver
- Hammer
- Pencil
- Power drill
- Drill bits: Ø 5/16" (8 mm) and Ø 1/8" (3 mm)
Components:
| Part Number | Quantity | Description |
|---|---|---|
| 120189 | 4x | Cam lock dowel |
| 122332 | 20x | Cam lock |
| 101350 | 28x | Wooden dowel |
| 114613 | 10x | Screw for cam lock |
| 101354 | 7x | Wooden dowel |
| 100136 | 4x | Long screw |
| 100347 | 20x | Screw |
| 152526 | 4x | Screw |
| 105042 | 2x | Screw |
| 10065533 | 4x | Screw |
| 112614 | 4x | Screw |
| 100481 | 10x | Screw |
| 109510 | 4x | Screw |
| 100001 | 1x | Allen key |
| 107271 | 4x | Plastic connector/bracket |
| 10066009 | 2x | Hinge bracket |
| 109937 | 2x | Hinge plate |
| 104323 | 6x | Long screw |
| 123492 | 8x | Screw/bolt |
| 145718 | 8x | Screw/bolt |
| 101345 | 8x | Screw/bolt |
| 119976 | 2x | Screw/bolt |
| 119030 | 8x | Cam lock |
| 106698 | 2x | Drawer runner screw |
| 110630 | 8x | Cam lock |
| 100823 | 2x | Washer |
| 117616 | 2x | Drawer knob |
| 106989 | 2x | Wall mounting bracket |
| 109049 | 4x | Screw for bracket |
| 109048 | 2x | Screw for bracket |
| 121714 | 2x | Wall plug |
| 326949 | 1x | Wall mounting kit (includes bracket, screws, wall plugs) |
Assembly Instructions
Step 1
Attach 4x plastic connectors/brackets (107271) to the base frame pieces. Ensure they are oriented correctly as shown in the diagram.
Step 2
Insert 4x screws for cam lock (114613) into the side frame pieces. Do not overtighten. The diagram shows a 'do not use' symbol ❌ for parts 112614 and 100481 in this step.
Step 3
Insert 2x screws (112614) into the side frame pieces. Attach 2x cam locks (112614) to the corresponding holes.
Step 4
Insert 8x screws for cam lock (114613) into the side frame pieces. The diagram shows a 'do not use' symbol ❌ for parts 112614 and 100481 in this step.
Step 5
Insert 16x wooden dowels (101350) into the designated holes on the frame pieces. The diagram shows a 'do not use' symbol ❌ for part 101354.
Step 6
Attach the side panels (marked 'R' and 'L') to the base frame using 4x screws (100347) for each side. Ensure correct orientation.
Step 7
Insert the vertical side panels into the base frame. Arrows ➡️ indicate downward insertion.
Step 8
Attach the drawer runners using 2x cam locks (122332) and the provided tool. The diagram shows the cam lock being rotated ? to secure the runner.
Step 9
Slide the back panel into the grooves of the side panels and base. An arrow ➡️ indicates downward insertion.
Step 10
Continue sliding the back panel into place. The diagram shows the cam lock mechanism being used to secure parts.
Step 11
Insert 2x wooden dowels (101350) into the side panels. The diagram shows a 'do not use' symbol ❌ for part 101354.
Step 12
Attach the side panels to the main structure. An arrow ➡️ indicates downward insertion.
Step 13
Secure the side panels using 2x cam locks (122332). The diagram shows the cam lock being rotated ? to secure the parts.
Step 14
Attach the back panel to the side panels using 2x wooden dowels (101350). The diagram shows a 'do not use' symbol ❌ for part 101354.
Step 15
Secure the back panel using 2x cam locks (122332). The diagram shows the cam lock being rotated ? to secure the parts.
Step 16
Attach the top frame to the main structure. An arrow ➡️ indicates downward insertion.
Step 17
Secure the top frame using 2x cam locks (122332). The diagram shows the cam lock being rotated ? to secure the parts.
Step 18
Secure the top frame further using 6x cam locks (122332). The diagram shows the cam lock being rotated ? to secure the parts.
Step 19
Attach the back panel to the main structure using 4x screws (109510).
Step 20
Assemble the drawer front and sides. Insert 4x wooden dowels (101350) into the drawer front. The diagram shows a 'do not use' symbol ❌ for part 101354.
Step 21
Attach the drawer sides to the drawer front. Arrows ➡️ indicate insertion.
Step 22
Attach the drawer front to the drawer sides using 4x screws (100136) and 4x cam lock screws (120189), secured by cam locks (100001).
Step 23
Attach the drawer bottom panel. Insert 2x screws for cam lock (114613) into the drawer sides. The diagram shows a 'do not use' symbol ❌ for parts 100481 and 114613.
Step 24
Attach the drawer bottom panel. Insert 4x wooden dowels (101350) into the drawer sides. The diagram shows a 'do not use' symbol ❌ for part 101354.
Step 25
Secure the drawer bottom panel using 2x cam locks (122332). The diagram shows the cam lock being rotated ? to secure the parts.
Step 26
Attach the drawer bottom panel using 7x wooden dowels (101354). The diagram shows a 'do not use' symbol ❌ for part 101350.
Step 27
Attach the drawer runners to the main unit using 6x long screws (104323) and the Allen key (100001).
Step 28
Attach the drawer slides to the main unit using 2x hinge brackets (10066009).
Step 29
Attach the drawer slides to the main unit using 2x screws (152526) and 2x screws (10065533).
Step 30
Attach the drawer slides to the main unit using 6x screws (100481). The diagram shows a 'do not use' symbol ❌ for part 114613.
Step 31
Attach the wall mounting bracket to the unit using 2x screws (119256) and 2x washers (100823). The bracket is part of the wall mounting kit (326949).
Step 32
Place the assembled unit onto the legs/base structure. An arrow ➡️ indicates downward placement.
Step 33
Secure the unit to the base using 6x cam locks (122332). The diagram shows the cam lock being rotated ? to secure the parts.
Step 34
Prepare for wall mounting. The diagram shows the wall mounting bracket and indicates the need to secure it to the wall. It also shows a warning symbol ⚠️ and a 'do not use' symbol ❌ for the wall mounting kit.
Step 35
Drill holes in the wall for the wall mounting bracket. The diagram shows a drill ? and an 'X' mark indicating drilling points.
Step 36
Attach the wall mounting bracket to the wall using screws (109048) and washers (100823). The diagram shows the bracket being screwed into place.
Step 37
Attach the drawer knobs. Insert 2x screws (105042) through the drawer front and secure with 2x cam locks (100001). Attach the drawer knobs (117616) using 2x screws (119976) and 2x washers (100823).
Step 38
Assemble the drawer box. Insert 4x screws/bolts (123492) into the drawer base.
Step 39
Assemble the drawer box. Insert 4x wooden dowels (101345) into the drawer sides.
Step 40
Attach drawer slides to the drawer box using 4x cam locks (110630). The diagram shows a 'do not use' symbol ❌ for part 119030.
Step 41
Attach the back panel of the drawer. An arrow ➡️ indicates downward insertion.
Step 42
Slide the drawer front onto the assembled drawer box. A curved arrow indicates the sliding motion.
Step 43
Attach the drawer front to the drawer box using 4x screws/bolts (145718).
Step 44
Secure the drawer front to the drawer box using 4x cam locks (119030). The diagram shows the cam lock being rotated ? to secure the parts.
Step 45
Attach drawer runners to the drawer using 6x screws (100347). The diagram shows the runner being attached to the drawer side.
Step 46
Attach drawer runners to the drawer using 1x screw (106698). The diagram shows the runner being attached to the drawer side.
Step 47
Attach the drawer handle. Insert 1x screw (119976) through the drawer front and secure with 1x washer (100823). Attach the drawer knob (117616).
Step 48
The final assembly shows the SUNDVIK changing table and chest of drawers fully assembled with drawers inserted.
