STOCKHOLM 2025
Assembly Instructions
Brand: IKEA
General Assembly Tips
Before starting assembly, ensure you have the necessary tools: a screwdriver ? and a spirit level ?.
Two people are recommended for assembly ???. Avoid assembling on surfaces that could be damaged; use a protective mat if necessary ?.
If you encounter difficulties or have questions, contact IKEA for assistance ?.
Parts List
| Part | Quantity | Part Number |
|---|---|---|
| Component A | 6x | 10119241 |
| Fastener Type 1 | 12x | 10119259 |
| Fastener Type 2 | 12x | 10119261 |
| Fastener Type 3 | 12x | 10119262 |
| Nut Type 1 | 6x | 10119973 |
| Wrench | 1x | (Included) |
Assembly Steps
Step 1: Prepare Base Components
Attach 6x Component A (10119241) to the designated holes on the main frame pieces. Secure each with 1x Nut Type 1 (10119973).
Step 2: Insert Dowels
Insert 2x Fastener Type 1 (10119259) into the pre-drilled holes on the long frame pieces. Ensure they are fully inserted.
(Diagram shows insertion of dowels into a long panel, and a panel with two dowels already inserted.)
Step 3: Connect Panels
Connect the main base panels using 12x Fastener Type 2 (10119261). Ensure a secure fit.
(Diagram shows multiple panels being joined with fasteners.)
Step 4: Attach Side Panel
Attach one side panel to the assembled base structure using the provided fasteners. Ensure correct orientation and secure fastening. Avoid incorrect assembly methods ?.
(Diagram shows attaching a side panel, with close-ups of fastener assembly and a warning against incorrect methods.)
Step 5: Attach Legs
Attach the legs (part 10119262) to the underside of the unit. Insert the legs into the designated slots and secure them.
(Diagram shows attaching legs to the main structure.)
Step 6: Attach Second Side Panel
Attach the second side panel to the opposite side of the unit using 1x Fastener Type 3 (10119262). Do not use a power drill ? ?.
(Diagram shows attaching the second side panel, with a warning against power drills.)
Step 7: Join Unit Sections
Connect the two main sections of the unit by sliding them together and securing them with the appropriate fasteners.
(Diagram shows two large sections of the unit being joined.)
Step 8: Further Section Assembly
Continue assembling sections of the unit using 2x Fastener Type 3 (10119262) as indicated.
(Diagram shows connecting more sections with fasteners.)
Step 9: Install Internal Supports
Install the internal supports or shelves by inserting them into the designated slots and securing them with 6x Fastener Type 3 (10119262).
(Diagram shows installing internal supports with fasteners.)
Step 10: Attach Top Panel and Finalize
Attach the top panel to the assembled structure. Secure it using the remaining fasteners, including 2x Fastener Type 3 (10119262).
(Diagram shows attaching the top panel and final supports.)
Final Check: Leveling
Use the provided wrench (10119973) to adjust the feet of the unit for proper leveling ?. Ensure the unit is stable.
(Diagram shows the completed unit with the wrench being used to adjust the feet.)
