STOCKHOLM 2025

Safety Information

WARNING: Children have died from furniture tipover. To reduce the risk of furniture tipover:

• ALWAYS install anti-tip device provided.
• NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
• ALWAYS secure your television with an anchor device.

Read and follow each step of the instruction carefully.

? [No climbing/standing on furniture]

Tools and Parts Overview

Required Tools: [Screwdriver] (Phillips and flathead), [Spirit level], [Allen key]

Parts List:

Assembly Steps

1. Step 1

   Lay out three large panels on a rug. Insert 6x part 101350 into the pre-drilled holes on the panels.

2. Step 2

   Attach side panels to the base panel. Insert 3x part 100092 (cam bolts) into the side panels. Insert cam locks into the base panel. Connect side panels to base, then tighten cam locks.

3. Step 3

   Attach the first back panel by sliding it into the grooves on the side and base panels.

4. Step 4

   Attach the second back panel by sliding it into the grooves. Rotate the unit.

5. Step 5

   Insert internal dividers. Use cam bolts (part 100092) and cam locks (part 100211) to secure them.

6. Step 6

   Attach the internal dividers. Ensure correct orientation. Insert cam bolts and cam locks and tighten.

7. Step 7

   Attach the top panel. Insert 6x part 100211 (cam bolts) into the side panels. Insert cam locks into the top panel. Connect the top panel and tighten cam locks.

8. Step 8

   Attach the legs. Insert 6x part 118331 (dowels) into the bottom panel. Attach leg components using screws (part 100092).

9. Step 9

   Attach leg supports. Insert 4x part 118331 into the leg components.

10. Step 10

    Attach the leg base. Insert 4x part 101350 into the leg base. Attach the leg base to the leg supports using screws.

11. Step 11

    Attach drawer runners to the side panels. Insert 8x part 159991 and 4x part 192800. Use screws (part 110018). Ensure the arrow on the runner points forward.

12. Step 12

    Attach drawer runners to the drawer boxes. Insert 4x part 110018 (screws) into the sides of the drawer boxes.

13. Step 13

    Attach leg supports to the main unit. Insert 4x part 101350 into the main unit.

14. Step 14

    Connect the main unit to the leg assembly. Align the parts and push down firmly.

15. Step 15

    Secure the leg assembly to the main unit. Use 4x part 105236 (screws) and 4x part 100092 (cam bolts).

16. Step 16

    Attach the sliding door tracks to the top and bottom of the unit. Use 4x part 10123636. Secure with screws (part 116894 and 110018).

17. Step 17

    Attach the sliding doors. Insert the doors into the top track and then lower them into the bottom track.

18. Step 18

    Secure the back panel. Use 12x part 10093081 and 12x part 10093082 (fasteners).

19. Step 19

    Attach door handles/knobs. Insert 2x part 141413 into the doors.

20. Step 20

    Attach door handles/knobs. Insert 2x part 141414 into the doors.

21. Step 21

    Insert shelves into the unit.

22. Step 22

    [Information Icon] Route cables through the designated openings for cable management.

23. Step 23

    Level the unit using a spirit level. Adjust the feet (part 190459, 4x) to ensure the unit is stable and level.

24. Step 24

    Attach anti-tip hardware to the wall. Secure the unit to the wall using the provided anti-tip kit. Insert 2x part 126916 and 2x part 133194.

25. Step 25

    Insert shelf supports. Use 4x part 10051650 into the side panels.

26. Step 26

    Insert shelves onto the supports.

27. Step 27

    Attach doors. Insert doors into runners.

28. Step 28

    Secure shelves. Use 8x part 10051650 (shelf supports).

29. Step 29

    Insert shelf pins. Use 8x part 101532.

30. Step 30

    Insert shelves onto the pins.