STOCKHOLM 2025 Glass-Door Cabinet
Important Safety Information
WARNING: Children have died from furniture tipover. To reduce the risk of furniture tipover:
- Always anchor your furniture with an anti-tip device.
- NEVER put a TV on this product.
- NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
- NEVER open more than one drawer at a time.
- Place heaviest items in the lowest drawers.
Read and follow each step of the instruction carefully.
Tools Required
The following tools are recommended for assembly:
- Screwdriver
- Level
- Allen key (provided)
- Wrench (provided)
Parts List
Please verify you have all the parts listed below before starting assembly.
| Part | Description | Quantity |
|---|---|---|
| 101345 | Screw | 16x |
| 10120744 | Screw | 24x |
| 101351 | Screw | 8x |
| 159991 | Bolt | 4x |
| 10120267 | Connector | 4x |
| 107091 | Washer | 2x |
| 190094 | Allen Key | 1x |
| 100092 | Dowel | 2x |
| 190459 | Bolt | 4x |
| 10048881 | Bracket | 1x |
| 121030 | Screw | 2x |
| 101357 | Screw | 2x |
| 100214 | Screw | 2x |
Assembly Steps
Follow these steps to assemble your STOCKHOLM 2025 cabinet:
- Attach the side panels to the base using screws (101345). Ensure the panels are flush with the base. [Image: Two people holding wooden panels, one with a cap, and a crossed-out image of them not holding the panels correctly.]
- Insert dowels (100092) into the designated holes on the side panels. [Image: Person assembling a wooden frame, with a crossed-out image showing incorrect assembly.]
- Attach the top panel to the side panels using screws (10048881) and brackets (10048881). Use the provided Allen key (190094). [Image: Close-up of screws and brackets being attached to the frame.]
- Attach the back support beams using screws (10120744). [Image: Attaching horizontal beams to the frame with screws.]
- Attach the legs to the base of the cabinet using bolts (159991). [Image: Attaching legs to the bottom of the cabinet.]
- Attach the second set of side panels to the base and the first set of side panels using screws (10120744). [Image: Assembling the second set of side panels.]
- Attach the top frame pieces using screws (101351). [Image: Attaching top frame pieces.]
- Assemble the leg structure by attaching the crossbars using screws (100214). [Image: Assembling the leg structure with crossbars.]
- Place the assembled leg structure onto the main cabinet base and secure it with screws (10120744). [Image: Placing the leg structure onto the cabinet base.]
- Secure the leg structure further with screws (10120744) using the Allen key (190094). [Image: Securing the leg structure with screws and Allen key.]
- Attach the remaining top frame pieces using bolts (159991). [Image: Attaching top frame pieces with bolts.]
- Insert the shelves into the cabinet. [Image: Inserting shelves into the cabinet frame.]
- Attach the glass doors to the cabinet hinges. [Image: Attaching glass doors to the cabinet.]
- Secure the glass doors with screws (10120744). [Image: Securing glass doors with screws.]
- Attach the door handles using screws (10120744). [Image: Attaching door handles.]
- Insert the remaining screws (101345) into the designated holes. [Image: Inserting screws into the cabinet.]
- Attach the top glass panel. [Image: Placing the top glass panel onto the cabinet.]
- Secure the top glass panel with brackets (10048881) and screws (190459). [Image: Securing the top glass panel with brackets and screws.]
- Attach the anti-tip device to the wall and the cabinet according to the separate instructions provided with the anti-tip kit. [Image: Attaching an anti-tip device to the wall and furniture.]
- Adjust the leveling feet to ensure the cabinet is stable. [Image: Adjusting leveling feet with a wrench.]
Care and Maintenance
Wipe clean with a damp cloth. Wipe dry with a clean cloth.
Contact Information
For further assistance, please visit the IKEA website or contact your local IKEA store.
