STOCKHOLM 2025
IKEA of Sweden
Assembly Recommendations
Before you begin assembly, please note the following:
- Required tools: Phillips head screwdriver ? and spirit level ?.
- Assembly is recommended for two people ???.
- Avoid using power tools ?? to prevent damage.
- Protect your floor with a rug or blanket ?️ to prevent scratches.
If you encounter any difficulties or have questions ❓, please refer to the IKEA store for assistance.
Parts Included
Please verify you have all the necessary parts before starting:
- 6x Wooden Dowels (Part No: 10119241)
- 12x Cam Lock Nuts (Part No: 10119259)
- 12x Cam Lock Screws (Part No: 10119261)
- 6x Bolts (Part No: 10119262)
- 1x Wrench (Part No: 10119973)
Step 1
Take one long wooden panel. Insert six cam lock screws (Part No: 10119262) into the pre-drilled holes on the panel.
Step 2
Insert two wooden dowels (Part No: 10119259) into the designated holes on a wooden piece. Then, insert two cam lock nuts (Part No: 10119261) into the corresponding holes and turn them clockwise to secure the connection.
Step 3
Connect multiple wooden planks. Insert wooden dowels (Part No: 10119259) and secure them by inserting and turning cam lock nuts (Part No: 10119261) into the appropriate holes on the connecting panels.
Step 4
Attach a short support piece to a larger panel. Insert cam lock screws (Part No: 10119262) into the support piece and secure it to the panel using cam lock nuts (Part No: 10119261). Ensure the correct orientation as shown in the diagram.
Step 5
Attach two leg-like support pieces to the bottom of a main panel. Insert the pieces into the designated slots.
Step 6
Attach another leg-like support piece to the other side of the panel. Secure it using cam lock screws (Part No: 10119262) and cam lock nuts (Part No: 10119261).
Step 7
Connect two partially assembled sections of the unit. Align the components and slide them together as indicated by the arrows.
Step 8
Continue connecting panels. Insert wooden dowels (Part No: 10119259) and secure with cam lock nuts (Part No: 10119261) as required for the structure.
Step 9
Attach horizontal support beams between the main vertical panels. Insert six cam lock screws (Part No: 10119262) into the support beams and secure them with cam lock nuts (Part No: 10119261).
Step 10
Place the top surface onto the assembled frame. Secure it by inserting two cam lock screws (Part No: 10119262) into the top surface and tightening them with cam lock nuts (Part No: 10119261) from underneath.
Final Tightening
Use the provided wrench (Part No: 10119973) to ensure all cam lock nuts are securely tightened. Check the stability of the assembled unit.
