Yitahome DGHN Standing Kitchen Utility Storage Shelf with Power Outlet
Assembly Instructions
Important Notice
"IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY"
Notice:
- Follow the installation instructions. Please confirm all accessories are preset before installation.
- Do not fully tighten the screws during initial assembly. Fully tighten screws only once all pieces which are correctly assembled.
Parts List
| Item No. | Reference Image | Quantity |
|---|---|---|
| 1 | [Shelf Panel] | x1 |
| 2 | [Side Panel] | x1 |
| 3 | [Side Panel] | x1 |
| 4 | [Shelf Panel] | x2 |
| 5 | [Shelf Panel] | x3 |
| 6 | [Desktop Panel with Power Outlet] | x1 |
| 7 | [Base Frame] | x1 |
| 8 | [Base Frame] | x1 |
| 9 | [Shelf Panel] | x1 |
| 10 | [Shelf Panel] | x1 |
| 11 | [Drawer Slide/Support] | x2 |
| 12 | [Drawer Front] | x1 |
| 13 | [Cabinet Door] | x1 |
| 14 | [Cabinet Door] | x1 |
| (A) | [Screw M3.5x14] | x46 |
| (B) | [Screw M4x16] | x46 |
| (C) | [Screw Ø8x30] | x12 |
| (D) | [Screw Ø4x16] | x2 |
| (E) | [Screw Ø4x16] | x2 |
| (F) | [Screw Ø7.8x38] | x2 SETS |
| (G) | [Screw Ø3.5x14] | x8 |
| (H) | [Screw Ø4x40] | x2 |
| (I) | [Screw M6x50] | x4 |
| (J) | [Screw M6x50] | x2 |
| (K) | [Cam Lock] | x2 |
| (L) | [Cam Bolt] | x2 |
| (M) | [Screw M4x18] | x2 |
| (N) | [Washer] | x2 |
| (O) | [Screw Ø4x16] | x10 |
| (P) | [Anti-tip Kit] | x2 |
Assembly Steps
Step 1: Assemble Base Frame
Connect the two base frame pieces (7, 8) using screws (A) and (B).
Diagram shows two base frame pieces being joined with screws.
Step 2: Attach Side Panels to Base
Attach the side panels (2, 3) to the assembled base frame. Use screws (B) and (C).
Diagram shows side panels being attached vertically to the base frame, secured with screws.
Step 3: Attach Desktop Panel
Attach the desktop panel (6), which includes the power outlet, to the top of the side panels. Use screws (B), (D), (E), and washers (N).
Diagram shows the desktop panel being placed on top of the side panels and secured with screws and washers. The power cord is visible.
Step 4: Attach First Shelf Panels
Attach the first set of shelf panels (4) to the side panels using screws (A).
Diagram shows two shelf panels being attached horizontally between the side panels, secured with screws.
Step 5: Attach Back Support Panels
Attach the back support panels (4) to the side panels using screws (A).
Diagram shows two back support panels being attached to the rear of the side panels, secured with screws.
Step 6: Attach Top Shelf
Attach the top shelf panel (1) to the top of the side panels using screws (A).
Diagram shows the uppermost shelf panel being attached to the top of the side panels, secured with screws.
Step 7: Attach Drawer Slides
Attach the drawer slides/supports (11) to the designated positions on the side panels using screws (A).
Diagram shows drawer slides being attached to the interior of the side panels with screws.
Step 8: Attach Remaining Shelves
Attach the remaining shelf panels (9, 10) to the side panels using screws (A) and (C). Ensure holes on the side of the board are correctly aligned.
Diagram shows two more shelf panels being attached to the frame, secured with screws.
Step 9: Attach X-Frame Supports
Attach the X-frame supports to the side panels using screws (A) and (C).
Diagram shows the decorative X-shaped crossbars being attached to the sides of the unit with screws.
Step 10: Assemble Drawer/Cabinet Components
Prepare the drawer front (12) and cabinet doors (13, 14) for attachment using cam locks (K), cam bolts (L), and screws (C, I, J, M).
Diagram shows the drawer front and cabinet doors being prepared for attachment, involving cam locks and bolts.
Step 11: Attach Drawer and Cabinet Doors
Insert the drawer and attach the cabinet doors to the main structure using screws (A, F, G, L, M).
Diagram shows the drawer being inserted and the cabinet doors being attached to the frame, secured with various screws.
Step 12: Attach Final Shelves
Install the remaining shelf panels (12) inside the cabinet area using screws (O).
Diagram shows the final shelf panels being installed inside the cabinet area, secured with screws.
Step 13: Secure to Wall (Anti-Tip Kit)
For safety and stability, secure the unit to the wall using the anti-tip kit (P). Attach brackets to the unit with screws (D, H) and then to the wall.
Diagram shows the anti-tip hardware being attached to the top rear of the unit and then to a wall, with screws.
Attention: For safety and stability, we suggest you have to secure the anti-tip accessories to the wall to prevent tipping, injury, and property damage.
Step 14: Installation Complete
The installation is now complete.
Diagram shows the fully assembled unit.
