Pure & Easy ASSEMBLY INSTRUCTIONS
Model: NBKTHS-V1
Important Notice
IMPORTANT: RETAIN FOR FUTURE REFERENCE. READ CAREFULLY.
Assemble on a flat, clean, and soft surface.
Professional installation is highly recommended.
Periodically check that all components are tightly secured.
Once installed, the product cannot be detached.
General Assembly Guidelines
- Strictly follow each step in the installation manual.
- Gather and organize all required parts prior to assembly.
- Assemble on a flat, clean, and soft surface.
- Two or more people are needed for assembly.
- Align the holes before assembly and snap into place with a slight tap.
- The product's structure prevents convenient assembly in low temperatures; do not intentionally install at low temperatures.
- During installation, refer to the accessories guides to ensure correct orientation.
Parts List
| Item No. | Reference | Description | Qty. |
|---|---|---|---|
| 1 | A | Large Base Panel | 1 |
| 2 | B | Main Side/Door Panel | 12 |
| 3 | C | Angled Roof Panel | 4 |
| 4 | Small Connector Bracket | 6 | |
| 5 | B | Small Reinforcement Panel | 12 |
| 6 | Door Panel | 2 | |
| 7 | Door Handle | 2 | |
| 8 | Screw (M4x30mm) | 4 | |
| 9 | Screw (M4x40mm) | 4 | |
| 10 | M5x16mm | Screw (M5x16mm) | 76 |
| 11 | M6x16mm | Screw (M6x16mm) | 32 |
| 12 | M4x20mm | Screw (M4x20mm) | 16 |
| 13 | M6x25mm | Screw (M6x25mm) | 4 |
| D | Lock Mechanism | 1 | |
| E | Hinge Component | 2 | |
| G | Horizontal Frame Support | 1 | |
| H | Vertical Frame Support | 1 |
Assembly Steps
Step 1: Assemble Side Frame
Attach a main side panel (item 2, labeled B) to a vertical frame support (item H) using two small connector panels (item 5, labeled B).
Step 2: Assemble Hinge Component 1
Assemble two hinge components (item E) together.
Step 3: Assemble Hinge Component 2
Assemble another two hinge components (item E) together.
Step 4: Attach Frame Supports to Hinges
Attach horizontal frame support (item G) and vertical frame support (item H) to the assembled hinge components (item E).
Step 5: Secure Frame and Hinges
Secure the frame and hinge assembly using 18 screws (item 11).
Step 6: Attach Roof Panels
Attach four angled roof panels (item 3, labeled C) to the structure using 16 screws (item 12).
Step 7: Attach Base Panel
Attach the large base panel (item A) using 14 screws (item 11).
Step 8: Reinforce Structure
Secure the structure further using 14 screws (item 11) and 12 screws (item 12).
Step 9: Assemble Door Unit
Assemble the door unit by attaching the door panel (item 6) and door handle (item 7) to frame components (items 1, 2, 4, 10) using screws (items 8, 10).
Specifically, attach the door panel (item 6) and handle (item 7) to frame components including panel 1 (1pc), panels 2 (3pcs), connector brackets 4 (3pcs), and base/frame parts 10 (8pcs), using 2 screws (item 8) and 8 screws (item 10).
Step 10: Install Lock Mechanism
Install the lock mechanism (item D) onto the door assembly using frame components (items 1, 2, 6, 7, 10) and screws (items 8, 10).
Specifically, attach the lock mechanism (item D) to the door frame using panel 1 (1pc), panels 2 (3pcs), door panel 6 (1pc), handle 7 (1pc), and frame parts 10 (8pcs), using 2 screws (item 8) and 8 screws (item 10).
Step 11: Attach Side Panels
Attach three main side panels (item 2, labeled B) to the frame using 6 screws (item 10).
Step 12: Attach More Side Panels
Attach another three main side panels (item 2, labeled B) to the frame using 6 screws (item 10).
Step 13: Reinforce with Small Panels
Reinforce the structure by attaching 12 small reinforcement panels (item 5, labeled B) using 48 screws (item 10).
Step 14: Final Securing
Secure the structure by attaching 4 screws (item 9) and 4 screws (item 13).
Step 15: Installation Complete
Installation is now complete.
