YITAHOME Assembly Instructions: Kitchen Baker's Rack (GZDX-V1, FTLFSS-6001)
Notice
- 1. Follow the installation instructions. Please confirm all accessories are preset before installation.
- 2. Do not fully tighten the screws during initial assembly. Fully tighten screws only once all pieces are correctly assembled.
- 3. If you encounter any problems during installation, please contact customer service.
Parts List
- A: Screws (M7*50) - 2 pcs
- B: Screws (M6*30) - 30 pcs
- F: Screws (M6*40) - 12 pcs
- H: Screws (M6*60) - 10 pcs
- I: Screws (M6*10) - 4 pcs
- N: Screws (M6*10) - 5 pcs
- V: Screw (M6) - 1 pc
- P: Screws (M3.5*14) - 2 pcs
- X: Electrical Outlet Component - 1 pc
- W: Hooks - 6 pcs
- Y: Allen Wrenches - 6 pcs
- Z: Anti-tip Kits - 2 pcs
- Structural Components: Parts 1 through 18 are the main structural pieces of the rack. Please refer to the original diagrams for visual identification and placement.
Assembly Steps
Step 1
Attach the two vertical side frames (12, 13) to the bottom shelf support (17) using screws (H).
Step 2
Connect the two main frame structures (10, 11) to the bottom shelf support (2) using screws (F) and Allen wrenches (Y).
Step 3
Attach the middle shelf (3) between the main frame structures (10, 11) using screws (B).
Step 4
Attach the lower shelves (4) between the main frame structures (10, 11) using screws (B).
Step 5
Attach the upper back support rails (9) to the top of the main frame structures using screws (H). Ensure the side with bigger holes faces up.
Step 6
Attach the cross support bar (18) to the back of the unit using screws (N) and (V).
Step 7
Attach the top shelf (1) to the upper frame using screws (F).
Step 8
Attach the vertical back panels (8, 14, 15) to the frame using screws (I) and (B).
Step 9
Attach the side shelf units (5) to the main frame using screws (A) and (B).
Step 10
Attach the top back rail (16) to the upper frame using screws (B) and (H).
Step 11
Attach the electrical outlet component (6) to the back panel using screws (B).
Step 12
Attach the hooks (W) to the designated spots on the side frame using screws (P). Install the electrical outlet component (X) using screws (P).
Step 13
Secure the unit to the wall using the anti-tip kits (Z) for safety and stability. Follow the provided instructions for wall mounting.
Safety Information
⚠️ Attention: For safety and stability, it is recommended to secure the anti-tip accessories to the wall to prevent tipping, injury, and property damage.
Contact Us
For any questions regarding installation or product issues, please contact YITAHOME customer service:
Phone: +1(888)-717-8084 (Monday-Friday 8:00 AM-16:30 PM PST / Saturday 8:00 AM-12:00 PM PST)
Email: after-sale.cs@hotmail.com
For Amazon Orders:
- Log into your Amazon account.
- Navigate to "Your Orders".
- Find the relevant purchase.
- Click on "Contact Seller".
