YITAHOME ASSEMBLY INSTRUCTIONS
ZSJX-V1
Models: FTOFWF-0061, FTOFWF-6031
STORAGE SHELF
This document provides step-by-step instructions for assembling the YITAHOME Storage Shelf (Model: ZSJX-V1).
PACKAGE CONTENT (A)
| CODR | DESCRIPTION | QTY |
|---|---|---|
| 1 | Upper cabinet top plate | 1 |
| 2 | Upper Cabinet Small Fixed Laminate | 1 |
| 3 | upper back panel | 1 |
| 4 | Right side panel of upper cabinet | 1 |
| 5 | Upper Cabinet Large Fixed Laminate | 1 |
| 6 | Left side panel of upper cabinet | 1 |
| 7 | Upper cabinet right door frame | 1 |
| 8 | Upper cabinet left door frame | 1 |
| 9 | lower back panel | 1 |
| 10 | Tailgate | 1 |
| 11 | lower cabinet panel | 1 |
| 12 | Lower cabinet right side panel combination | 1 |
| 13 | Lower cabinet left panel combination | 1 |
| 14 | Lower cabinet movable shelf | 1 |
| 15 | Lower cabinet floor | 1 |
| 16 | Lower cabinet right door panel | 1 |
| 17 | Lower cabinet left door panel | 1 |
HARDWARE
| Identifier | Description | Quantity |
|---|---|---|
| A | Cam Bolt (29X+1X) | 10 |
| B | Cam Lock (Ø15) (29X+1X) | 10 |
| C | Wooden Dowel (Ø8x30mm) (26X+1X) | 10 |
| D | Wooden Block (2X) | 2 |
| E | Wheel (4X) | 4 |
| F | Screw (Ø5/32" x 25mm) (4X) | 4 |
| G | Bracket (4X) | 4 |
| H | Screw (Ø3.5x16mm) (36X+1X) | 36 |
| I | Screw (Ø3.9 x 15mm Silvery) (52X+1X) | 52 |
| J | Decorative Cap (28X) | 28 |
| K | Metal Plate (2X+4X) | 2 |
| L | Screw (2X+2X) | 2 |
| M | Decorative Cap (2X) | 2 |
| N | Hinge (8X) | 8 |
| O | Screw (4X) | 4 |
| P | Screwdriver (1X) | 1 |
ASSEMBLY STEPS
Step 1
Attach Cam Bolts (A) to panels 4 and 6.
Step 2
Connect panels 4 and 6 to panels 2 and 5 using Cam Locks (B) and Wooden Dowels (C). Attach panel 10.
Step 3
Attach Cam Bolts (A) and Wooden Blocks (D) to panel 1.
Step 4
Connect panel 1 to the assembly from Step 2 using Cam Locks (B) and Wooden Dowels (C).
Step 5
Attach Cam Bolts (A) and Wooden Blocks (D) to panel 11. Connect panel 11 to the existing structure using Cam Locks (B) and Wooden Dowels (C).
Step 6
Attach panel 10 to the structure. Connect panel 11 using Cam Locks (B) and Wooden Dowels (C).
Step 7
Attach Cam Bolts (A) and Wooden Blocks (D) to panels 12 and 13.
Step 8
Connect panels 12 and 13 to panel 15 using Cam Locks (B) and Wooden Dowels (C).
Step 9
Connect the upper and lower cabinet structures using Cam Locks (B) and Wooden Dowels (C).
Step 10
Attach back panels 3 and 9 using Screws (H).
Step 11
Insert the movable shelf (14) into the lower cabinet. Attach Decorative Caps (J) to visible Cam Connectors (B).
Step 12
Attach Hinges (N) to door frames 7 and 8 using Screws (F) and (I).
Step 13
Attach Hinges (N) to door panels 16 and 17 using Screws (E), (F), and (I).
Step 14
Install the lower door hinges before the upper ones to ensure consistent gaps. Adjust hinges for front-back and left-right alignment.
Step 15
Attach Decorative Caps (M) to the designated areas.
Step 16
Attach Metal Plates (K) using Screws (H).
Step 17
Secure the unit to the wall using the provided anti-tip hardware (L and K) to prevent tipping, injury, and property damage. Use a drill and screwdriver as needed.
