YITAHOME HZQD-V1 Kitchen Pantry Cabinet

Assembly Instructions

Model Numbers: FTOFWF-9003, FTOFWF-9004

Notice

1. Follow the installation instructions carefully. Please confirm all accessories are present before installation.

2. Do not fully tighten screws during initial assembly. Fully tighten screws only after all pieces are correctly assembled.

3. If you encounter any problems during installation, please contact customer service.

Parts List

Part Number	Description	Quantity
1	Base Panel	x1
2	Left Side Panel	x1
3	Top Panel	x1
4	Adjustable Shelf	x1
5	Back Panel (Lower Section)	x1
6	Right Side Panel	x1
7	Upper Back Panel	x1
8	Middle Shelf	x2
9	Upper Left Side Panel	x1
10	Upper Right Side Panel	x1
11	Upper Top Panel	x1
12	Drawer Side Panel (Left)	x2
13	Drawer Side Panel (Right)	x2
14	Drawer Bottom Panel	x1
15	Drawer Back Panel	x1
16	Drawer Front Panel	x1
17	Drawer Slide (Cabinet Mount)	x1
18	Drawer Slide (Drawer Mount)	x1
19	Drawer Slide Rail	x1
20	Drawer Slide Rail	x1
21	Upper Shelf	x1
22	Upper Shelf Support	x1
23	Drawer Front Support	x1
24	Drawer Front Support	x1
25	Glass Door (Left)	x1
26	Glass Door (Right)	x1
27	Door Panel (Lower Left)	x1
28	Door Panel (Lower Right)	x1
29	Drawer Base Panel	x1
30	Drawer Side Panel	x1
31	Drawer Side Panel	x1
32	Drawer Back Panel	x1
33	Drawer Bottom Panel	x1
34	Drawer Front Panel	x1
35	Drawer Side Panel	x1
36	Drawer Side Panel	x1
37	Drawer Back Panel	x1
38	Drawer Bottom Panel	x1
39	Drawer Slide Rail	x1
40	Power Outlet Unit	x1

Hardware List

Identifier	Description	Quantity
A	Screw (3mm x 35mm)	x41+3
B	Screw (4mm x 35mm)	x4+1
C	Cam Lock	x14+1
D	Dowel (Ø15mm)	x24+2
E	Screw (Ø6x35mm)	x38+3
F	Screw (M4x10mm)	x2
G	Screw (3.5x12mm)	x4+1
H	Screw (3.0x12mm)	x28+2
I	Dowel	x6+1
J	Dowel	x6+1
K	Bracket	x8+1
L	Screw (3.0x16mm)	x6
M	Screw (Ø6x35mm)	x6
N	Screw (3mm x 14mm)	x37+3
O	Handle	x1
P	Handle	x7
Q	Screw (M4x25mm)	x16
R	Anti-tip Kit	x2
S	Screw (3.0x14mm)	x10+1
T	Hook	x8
U	Drawer Slide Component	x1
V	Drawer Slide Component	x1
TOOL	Screwdriver (3mm, 4mm)	Included

Assembly Steps

Step 1

Attach part 1 (Base Panel) to part 2 (Left Side Panel) using two (2) H screws and four (4) E screws. Ensure correct orientation as shown in the diagram.

Step 2

Attach part 2 (Left Side Panel) to part 3 (Top Panel) using two (2) G screws and one (1) V screw. Also, attach part 1 (Base Panel) to part 2 (Left Side Panel) using two (2) E screws. Ensure correct alignment.

Step 3

Attach part 7 (Upper Back Panel) to part 2 (Left Side Panel) using two (2) G screws. Then, attach part 7 to part 3 (Top Panel) using two (2) H screws and one (1) U component. Pay attention to the direction of the components.

Step 4

Attach part 3 (Top Panel) to part 7 (Upper Back Panel) using two (2) H screws and one (1) U component. Also, attach part 3 to part 2 (Left Side Panel) using two (2) E screws and three (3) L screws. Ensure correct alignment and direction.

Step 5

Attach part 3 (Top Panel) to part 7 (Upper Back Panel) using two (2) A screws. Pay attention to the direction of the components.

Step 6

Attach part 6 (Right Side Panel) to part 3 (Top Panel) using two (2) D screws and two (2) N screws. Also, attach part 6 to part 1 (Base Panel) using two (2) D screws and two (2) N screws. Pay attention to the direction.

Step 7

Attach part 5 (Back Panel - Lower Section) to part 2 (Left Side Panel) using two (2) N screws. Also, attach part 5 to part 1 (Base Panel) using two (2) A screws. Pay attention to the direction.

Step 8

Attach part 5 (Back Panel - Lower Section) to part 6 (Right Side Panel) using two (2) N screws. Also, attach part 5 to part 3 (Top Panel) using two (2) N screws. Pay attention to the direction.

Step 9

Attach part 5 (Back Panel - Lower Section) to part 1 (Base Panel) using two (2) D screws. Attach part 5 to part 2 (Left Side Panel) using two (2) D screws. Attach part 5 to part 3 (Top Panel) using two (2) D screws. Attach part 5 to part 6 (Right Side Panel) using two (2) D screws.

Step 10

Attach part 3 (Top Panel) to part 2 (Left Side Panel) using two (2) N screws. Attach part 3 to part 6 (Right Side Panel) using two (2) N screws. Attach part 2 to part 1 (Base Panel) using two (2) D screws. Attach part 6 to part 1 (Base Panel) using two (2) D screws.

Step 11

Attach part 8 (Middle Shelf) to part 2 (Left Side Panel) and part 6 (Right Side Panel) using six (6) N screws. Attach part 8 to part 5 (Back Panel - Lower Section) using six (6) N screws.

Step 12

Attach part 4 (Adjustable Shelf) to the pre-drilled holes on the side panels using ten (10) E screws.

Step 13

Attach part 4 (Adjustable Shelf) to the side panels using six (6) A screws.

Step 14

Attach part 12 (Drawer Side Panel - Left) and part 13 (Drawer Side Panel - Right) to part 4 (Adjustable Shelf) using four (4) N screws and ten (10) C cam locks. Attach part 13 to part 4 using four (4) N screws and ten (10) C cam locks.

Step 15

Attach part 12 (Drawer Side Panel - Left) and part 13 (Drawer Side Panel - Right) to part 4 (Adjustable Shelf) using four (4) A screws.

Step 16

Attach part 9 (Upper Left Side Panel) and part 10 (Upper Right Side Panel) to part 8 (Middle Shelf) using six (6) N screws. Pay attention to the direction.

Step 17

Attach part 19 (Drawer Slide Rail) to part 16 (Drawer Front Panel) using two (2) U components and four (4) H screws. Attach part 17 (Drawer Slide - Cabinet Mount) to part 16 using six (6) E screws.

Step 18

Attach part 16 (Drawer Front Panel) to part 19 (Drawer Slide Rail) using four (4) D screws and two (2) N screws. Attach part 16 to part 20 (Drawer Slide Rail) using four (4) D screws and two (2) N screws.

Step 19

Attach part 39 (Drawer Slide Rail) to part 23 (Drawer Front Support) using three (3) B screws. Ensure correct alignment.

Step 20

Attach part 22 (Upper Shelf Support) to part 2 (Left Side Panel) and part 6 (Right Side Panel) using one (1) N screw and two (2) A screws. Pay attention to the direction.

Step 21

Attach part 18 (Drawer Slide - Drawer Mount) to part 22 (Upper Shelf Support) using three (3) N screws. Attach part 18 to part 22 using three (3) A screws. Pay attention to the direction.

Step 22

Attach part 17 (Drawer Slide - Cabinet Mount) to part 3 (Top Panel) using two (2) D screws. Attach part 17 to part 4 (Adjustable Shelf) using one (1) A screw and one (1) B screw. Ensure correct alignment and direction.

Step 23

Insert part 24 (Drawer Front Support) into part 23 (Drawer Front Support) and attach using three (3) N screws.

Step 24

Attach part 21 (Upper Shelf) to the upper side panels using three (3) L screws. Pay attention to the direction.

Step 25

Attach part 21 (Upper Shelf) to the side panels using six (6) A screws.

Step 26

Attach part 11 (Upper Top Panel) to the upper side panels using six (6) E screws.

Step 27

Attach part 11 (Upper Top Panel) to the upper side panels using two (2) N screws and seven (7) A screws.

Step 28

Attach the upper cabinet assembly to the lower cabinet assembly using two (2) D screws and four (4) C cam locks. Ensure proper alignment.

Step 29

Attach brackets K to part 15 (Drawer Back Panel) and part 14 (Drawer Bottom Panel) using eight (8) K brackets. Attach brackets K to part 14/15 using eight (8) K brackets.

Step 30

Attach handles F to part 40 (Power Outlet Unit) using two (2) F screws.

Step 31

Attach part 27 (Door Panel - Lower Left) and part 28 (Door Panel - Lower Right) to the cabinet frame. Use J screws (x3), I screws (x3), M screws (x3), H screws (x6), Q screws (x6), and P screws (x3) for each door. Pay attention to the direction and ensure the doors are aligned correctly.

Step 32

Step 33

Attach part 25 (Glass Door - Left) and part 26 (Glass Door - Right) to the cabinet frame. Use J screws (x3), I screws (x3), M screws (x3), H screws (x6), Q screws (x6), and P screws (x3) for each door. Pay attention to the direction and ensure the doors are aligned correctly.

Step 34

Step 35

Assemble the drawer components. Attach part 29 (Drawer Base Panel) to part 30 (Drawer Side Panel) and part 31 (Drawer Side Panel) using four (4) E screws and four (4) D screws. Attach part 32 (Drawer Back Panel) to part 33 (Drawer Bottom Panel) using two (2) Q screws. Attach the assembled drawer sides to the bottom panel using four (4) A screws.

Step 36

Assemble the second drawer components. Attach part 34 (Drawer Front Panel) to part 35 (Drawer Side Panel) and part 36 (Drawer Side Panel) using four (4) E screws and four (4) D screws. Attach part 37 (Drawer Back Panel) to part 38 (Drawer Bottom Panel) using two (2) Q screws. Attach the assembled drawer sides to the bottom panel using four (4) A screws.

Step 37

Attach drawer slide components. Attach H screws (x4) and V (x1) to the drawer slides for the lower section. Attach H screws (x4) and U (x1) to the drawer slides for the upper section. Ensure correct orientation (V-DL, V-DR, U-DL, U-DR).

Step 38

Install the drawers into the cabinet. Insert the drawer slides into their respective cabinet mounts. Attach hooks T to the upper section using eight (8) T hooks.

Step 39

Secure the cabinet using S screws (x10). These likely reinforce the structure or attach decorative elements.

Step 40

WALL MOUNTING (Anti-tip Kit)

For safety and stability, secure the anti-tip accessories to the wall to prevent tipping, injury, and property damage.

Step 1: Attach bracket R to the top of the cabinet.
Step 2: Drill a hole in the wall using an Ø8mm drill bit at the desired height.
Step 3: Insert a wall anchor (if needed) and screw in the R bracket to the wall.
Step 4: Connect the cabinet bracket R to the wall bracket R using the provided strap/connector.
Step 5: Ensure the connection is secure.

Installation Completed.

	YITAHOME GZPFK-V1 Cabinet Assembly Instructions \| FTOFWF-6025/6026 Comprehensive assembly instructions for the YITAHOME GZPFK-V1 cabinet (models FTOFWF-6025/6026). Includes detailed steps, parts list, hardware guide, and contact information for home or office setup.
	YITAHOME FTOFWF-9001/FTOFWF-9002 Assembly Instructions Step-by-step assembly instructions for the YITAHOME FTOFWF-9001 and FTOFWF-9002 storage cabinets, including parts list, hardware list, and detailed assembly steps.
	YITAHOME GZPFK-V1 Wine Cabinet Assembly Instructions Comprehensive assembly instructions for the YITAHOME GZPFK-V1 Wine Cabinet. This guide provides a detailed breakdown of all parts, hardware, and step-by-step assembly procedures to help you build your wine cabinet efficiently and safely.
	YITAHOME GZHF-V1 Wooden Cabinet Pet Cabinet Assembly Instructions Assembly instructions for the YITAHOME GZHF-V1 Wooden Cabinet Pet Cabinet, including a parts list and step-by-step guidance for assembly and wall mounting.
	YITAHOME GZPFK-V1 Storage Shelf Assembly Instructions Comprehensive assembly instructions for the YITAHOME GZPFK-V1 Storage Shelf, including a detailed parts list, step-by-step visual guides, and contact information for support.
	YITAHOME ZSJX-V1 Storage Shelf Assembly Instructions Detailed assembly instructions for the YITAHOME ZSJX-V1 Storage Shelf, including a parts list and step-by-step guidance for building the furniture.
	YITAHOME DGHR-V1 Shoe Cabinet Assembly Instructions Step-by-step assembly guide for the YITAHOME DGHR-V1 shoe cabinet, including parts list, hardware details, and assembly procedures. Ensure correct installation of your shoe storage unit.
	SDKL-V1 Shoe Storage Cabinet Assembly Instructions Comprehensive assembly guide for the Yitahome SDKL-V1 shoe storage cabinet, detailing parts, hardware, and step-by-step instructions for a secure and functional furniture piece.